Deye SUN-100K-G03 grid-tied inverter 100 kW 3-phase 6 MPPT – grid-tied inverter for larger solar PV systems.The Deye SUN-100K-G03 is a 100 kW 3-phase 6 MPPT grid-tied inverter for larger solar PV systems. With 6 MPPT trackers and up to 150 kW of connected PV power, it is built for commercial and industrial installations where high efficiency and operational reliability are essential.Advantages Rated output 100 kW 6 independent MPPT trackers for flexible string configuration Up to 150 kW of PV power can be connected Efficiency up to 98.80 % Ingress protection rating IP65 – suitable for outdoor installation Communication via RS485/RS232 Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Application Larger solar installations on commercial roofs and industrial buildings Solar farms and agriculture Installations where multiple strings must be distributed across separate MPPT trackers Specifications Max. PV input power 150 kW Max. PV input voltage 1,000 V Start-up voltage 250 V MPPT voltage range 200-850 V Rated PV input voltage 600 V Max. short-circuit current, input 60+60+60+60+60+60 A Max. PV operating current 40+40+40+40+40+40 A Number of MPPT / strings per MPPT 6/4+4+4+4+4+4 Rated AC output power 100 kW Max. AC output power (VA) 110 Rated AC output current 151.5/144.9 A Max. AC output current 166.7/159.4 A Rated output voltage 220/380V, 230/400V 0.85Un-1.1Un Grid connection 3L+N+PE Rated grid frequency / range 50/45-55, 60/55-65 Hz Power factor, adjustment range 0.8 leading to 0.8 lagging Harmonic current distortion (THDi) <3 % DC injection current <0.5 %ln Max. efficiency 98.80 % Euro efficiency 98.20 % MPPT efficiency ＞99 % DC reverse polarity protection Yes Overcurrent protection, AC output Yes Overvoltage protection, AC output Yes Short-circuit protection, AC output Yes Thermal protection Yes Insulation monitoring Yes DC component monitoring Yes Arc fault detection (AFCI) optional Anti-islanding protection Yes Residual current monitoring Yes Surge protection Type II(DC), Type II(AC) DC switch Yes Communication interface RS485/RS232 Monitoring GPRS/WiFi/Bluetooth/4G/LAN (optional) Operating temperature -25 to +60°C, >45°C power derating Permissible humidity 0~100 % Max. installation altitude 4,000m Noise level ≤ 55 dB Ingress protection (IP) IP65 Inverter topology Transformerless Overvoltage category OVC II(DC), OVC III(AC) Dimensions (W×H×D) 824mm*516mm*312.7mm (excl. connectors and brackets) Weight 81 kg Warranty 5 years Cooling Intelligent air cooling Grid standards IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-100K-G03Download datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-125K-SG02HP3-EU-GM10 hybrid inverter 125 kW 3-phase high-voltage – solar inverter, battery charger, and emergency power in one unit.The Deye SUN-125K-SG02HP3-EU-GM10 is a 125 kW 3-phase high-voltage hybrid inverter that combines a solar inverter, battery charger, and emergency power supply in one unit. With 10 MPPT trackers and up to 250,000 W of connected solar power, it can both work in tandem with the electrical grid and continue to power the building if the power goes out. This means you store your own solar energy in the battery and use it when you actually need it – instead of selling it cheaply to the grid.Advantages Rated power 125,000 W 10 independent MPPT trackers for flexible string configuration Up to 250,000 W of solar power can be connected Max. charge/discharge current 100+100 A for the battery Peak power in off-grid mode: 1.5 × rated power for 10 s Efficiency up to 98.70% IP65 ingress protection – can be installed outdoors Built-in LCD display+LED for local operation and monitoring Communication via RS485/RS232/CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Applications Solar power systems with battery storage in private homes and small businesses Upgrading existing solar systems with a battery (AC- or DC-coupled) Emergency power and backup during power outages Load shifting – charge the battery when power is cheap and use it when prices peak Three-phase installations, including those with unbalanced loads between phases Specifications Battery type Lithium-ion Battery voltage range 160-1000 V Max. charge/discharge current 100+100 A Lithium battery charging strategy Automatic adaptation to BMS Number of battery inputs 2 Max. connected PV power 250,000 W Max. PV input power 200,000 W Max. PV input voltage 1,000 V Start-up voltage 180 V MPPT voltage range 150-850 V Rated PV input voltage 650 V Max. PV operating current 42+42+42+42+42+42+42+42+42+42 A Max. short-circuit current, input 63+63+63+63+63+63+63+63+63+63 A Number of MPPT / strings per MPPT 10/2+2+2+2+2+2+2+2+2+2 Rated AC input/output power 125,000 W Max. AC input/output power (VA) 135,000 VA Rated AC input/output current 189.4/181.2 A Max. AC input/output current 204.6/195.7 A Max. continuous AC pass-through (grid to load) 250 A Peak power (off-grid) 1.5 × rated power for 10 s Power factor, adjustment range 0.8 leading – 0.8 lagging Rated input/output voltage 220/380V, 230/400V 0.85Un-1.1Un 3L+N+PE Rated grid frequency / range 50/45-55, 60/55-65 Total harmonic distortion (THDi) <3% (at rated power) DC injection current <0.5%In Max. efficiency 98.70% Euro-efficiency 98.10% MPPT efficiency ＞99% Built-in protection DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault detection (AFCI) (optional), anti-islanding protection, DC switch, insulation monitoring, residual current monitoring Surge protection Type II(DC), Type II(AC) Display LCD display+LED Communication interface RS485/RS232/CAN Monitoring GPRS/WiFi/Bluetooth/4G/LAN (optional) Operating temperature -40°C–+60°C, ＞45°C power derating Permissible humidity 0-100% Max. installation altitude 3,000m Noise level ≤ 65 Ingress protection (IP) IP65 Inverter topology Non-isolated Overvoltage category OVC II(DC), OVC III(AC) Dimensions (W×H×D) 734×1091×344 (excl. connectors and brackets) Weight 161.7 kg Warranty 5 years / 10 years (warranty period depends on the inverter's installation location – see Deye's warranty policy) Cooling Intelligent air cooling Grid standards IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-125K-SG02HP3-EU-GM10Download datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-80K-SG02HP3-EU-EM6 hybrid inverter 80 kW 3-phase high-voltage – solar inverter, battery charger, and emergency power in one unit.The Deye SUN-80K-SG02HP3-EU-EM6 is an 80 kW 3-phase high-voltage hybrid inverter that combines a solar inverter, battery charger, and emergency power supply in one unit. With 6 MPPT trackers and up to 160,000 W of connected solar power, it can both work in tandem with the electrical grid and continue powering the house if the power goes out. This means you store your own solar energy in the battery and use it when you need it most – instead of selling it cheaply to the grid.Benefits Rated power 80,000 W 6 independent MPPT trackers for flexible string configuration Up to 160,000 W of solar power can be connected Max. charge/discharge current 80+80 A for the battery Peak power in island mode: 1.5 × rated power for 10 s Efficiency up to 98.70% IP65 ingress protection rating – can be installed outdoors Communication via RS485/RS232/CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Application Solar power systems with battery storage in private homes and small businesses Upgrading existing solar systems with a battery (AC or DC coupled) Emergency power and backup during power outages Load shifting – charge the battery when electricity is cheap and use it when prices peak Three-phase installations, including those with unbalanced phase loads Specifications Battery type Lithium-ion Battery voltage range 160-1000 V Max. charge current 80+80 A Max. discharge current 80+80 A Lithium battery charging strategy Self-adaptive to BMS Number of battery inputs 2 Max. connected PV power 160,000 W Max. PV input power 128,000 W Max. PV input voltage 1,000 V Start-up voltage 180 V MPPT voltage range 150-850 V Rated PV input voltage 650 V Max. PV operating current 36+36+36+36+36+36 A Max. short-circuit current, input 54+54+54+54+54+54 A Number of MPPT / strings per MPPT 6/2+2+2+2+2+2 Rated AC input/output power 80,000 W Max. AC input/output power (VA) 88,000 VA Rated AC input/output current 121.3/115.9 A Max. AC input/output current 133.4/127.6 A Max. continuous AC pass-through (grid to load) 200 A Peak power (island mode) 1.5 × rated power for 10 s Power factor, adjustment range 0.8 capacitive to 0.8 inductive Rated input/output voltage 220/380V, 230/400V 0.85Un-1.1Un Rated grid frequency / range 50/45-55, 60/55-65 Hz Grid connection 3L+N+PE Harmonic current distortion (THDi) <3% (of rated power) DC injection current <0.5% In Max. efficiency 98.70% Euro efficiency 98.1% MPPT efficiency >99% Integrated protection Reverse DC polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault detection (AFCI) (optional), anti-islanding protection, DC switch, insulation monitoring, residual current monitoring Overvoltage protection Type II(DC), Type II(AC) Communication interface RS485/RS232/CAN Monitoring GPRS/WiFi/Bluetooth/4G/LAN (optional) Operating temperature -40 to +60°C, >45°C derating Permissible humidity 0-100% Max. installation altitude 3,000 m Noise level ≤65 dB Ingress protection (IP) IP65 Inverter topology Non-isolated Overvoltage category OVC II(DC), OVC III(AC) Dimensions (W×H×D) 606×927×314 (excluding connectors and brackets) Weight 105.0 kg Cooling Intelligent air cooling Warranty 5 years / 10 years (warranty period depends on the inverter's installation site – see Deye’s warranty policy) Grid standards IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-80K-SG02HP3-EU-EM6Download datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-50K-SG01HP3-EU-BM4 hybrid inverter 50 kW 3-phase high-voltage – solar inverter, battery charger, and emergency power in one unit.The Deye SUN-50K-SG01HP3-EU-BM4 is a 50 kW 3-phase high-voltage hybrid inverter that combines a solar inverter, battery charger, and emergency power supply in one unit. With 4 MPPT trackers and up to 100,000 W of connected solar power, it can operate in conjunction with the grid and continue to power the house if the electricity goes out. This means you store your own solar energy in the battery and use it when you actually need it – instead of selling it cheaply to the grid.Advantages Nominal power 50,000 W 4 independent MPPT trackers for flexible string configuration Up to 100,000 W of solar power can be connected Max. charge/discharge current 50+50 A for the battery Peak power in off-grid mode: 1.5 × nominal power for 10 s Efficiency up to 97.60% Ingress protection IP65 – suitable for outdoor installation Communication via RS485/RS232/CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Application Solar power systems with battery storage for private homes and small businesses Upgrading existing solar systems with a battery (AC- or DC-coupled) Emergency power and backup during power outages Load shifting – charge the battery when electricity is cheap and use it when prices peak Three-phase installations, including with unbalanced load between phases Specifications Battery type Lithium-ion Battery voltage range 160-800 V Max. charge current 50+50 A Max. discharge current 50+50 A Charging strategy for lithium battery Automatic adaptation to BMS Number of battery inputs 2 Max. connected PV power 100,000 W Max. DC input power 80,000 W Max. DC input voltage 1,000 V Start-up voltage 180 V MPPT voltage range 150-850 V Nominal DC input voltage 600 V Max. short-circuit current, input 55+55+55+55 A Max. PV operating current 36+36+36+36 A Number of MPPT / strings per MPPT 4/2+2+2+2 Nominal AC input/output power 50,000 W Max. AC input/output power (VA) 55,000 VA Peak power (off-grid) 1.5 × nominal power for 10 s Nominal AC input/output current 75.8/72.5 A Max. AC input/output current 83.4/79.8 A Max. continuous AC pass-through (grid to load) 200 A Nominal input/output voltage 220/380V, 230/400V 0.85Un-1.1Un Grid connection 3L+N+PE Nominal grid frequency / range 50/45-55, 60/55-65 Power factor, adjustment range 0.8 leading – 0.8 lagging Harmonic current distortion (THDi) <3% (of nominal power) DC injection current <0.5 %ln Max. efficiency 97.60% Euro efficiency 97.0% MPPT efficiency ＞99% Built-in protection Reverse DC polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault detection (AFCI) (optional), anti-islanding protection, DC switch, insulation monitoring, residual current monitoring Surge protection Type II(DC), Type II(AC) Communication interface RS485/RS232/CAN Monitoring GPRS/WiFi/Bluetooth/4G/LAN (optional) Operating temperature -40°C+60°C, ＞45°C derating Permissible humidity 0-100% Max. installation altitude 2,000m Noise level ≤ 65 dB(A) Ingress protection (IP) IP65 Inverter topology Non-isolated Overvoltage category OVC II(DC), OVC III(AC) Dimensions (W×H×D) 527*894*294 (excl. connectors and brackets) Weight 80 kg Warranty 5 years / 10 years (warranty period depends on the inverter's installation location – see Deye's warranty policy) Cooling Intelligent air cooling Grid standards IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-50K-SG01HP3-EU-BM4Download datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-30K-SG02HP3-EU hybrid inverter 30 kW 3-phase high voltage – solar inverter, battery charger, and emergency power in one unit.The Deye SUN-30K-SG02HP3-EU is a 30 kW 3-phase high voltage hybrid inverter that combines a solar inverter, battery charger, and emergency power supply in one unit. With 3 MPPT trackers and up to 60,000 W of connected solar power, it can work with the grid and continue powering the house if the power goes out. This means you store your own solar energy in the battery and use it when you need it most – instead of selling it cheaply to the grid.Advantages Rated power 30,000 W 3 independent MPPT trackers for flexible string configuration Up to 60,000 W of solar power can be connected Max. charging/discharging current 75 A for the battery Peak power in off-grid mode: 1.5 × rated power for 10 s Efficiency up to 98.50% IP65 protection class – can be mounted outdoors Communication via RS485/RS232/CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Application Solar power systems with battery storage in private homes and small businesses Upgrading existing solar systems with a battery (AC or DC coupled) Emergency power and backup during power outages Load shifting – charge the battery when power is cheap and use it when prices peak Three-phase installations, including those with unbalanced loads between phases Specifications Battery type Lithium-ion Battery voltage range 160-700 V Max. charging current 75 A Max. discharging current 75 A Charging strategy for lithium battery Automatic adaptation to BMS Number of battery inputs 1 Max. connected PV power 60,000 W Max. PV input power 48,000 W Max. PV input voltage 1,000 V Start-up voltage 180 V MPPT voltage range 150-850 V Rated PV input voltage 600 V Max. short-circuit current, input 54+54+54 A Max. PV operating current 36+36+36 A Number of MPPT / strings per MPPT 3/2+2+2 Rated AC input/output power 30,000 W Max. AC input/output power (VA) 33,000 VA Peak power (off-grid) 1.5 × rated power for 10 s Rated AC input/output current 45.5/43.5 A Max. AC input/output current 50/47.9 A Max. continuous AC pass-through (grid to load) 80 A Rated input/output voltage 220/380V, 230/400V 0.85Un-1.1Un Grid connection 3L+N+PE Rated grid frequency / range 50/45-55, 60/55-65 Power factor, adjustment range 0.8 capacitive – 0.8 inductive Total harmonic distortion (THDi) <3% (of rated power) DC injection current <0.5% ln Max. efficiency 98.50% Euro-efficiency 98.0% MPPT efficiency >99% Built-in protection DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault detection (AFCI) (optional), anti-islanding protection, DC switch, insulation monitoring, residual current monitoring Surge protection Type II (DC), Type II (AC) Communication interface RS485/RS232/CAN Monitoring GPRS/WiFi/Bluetooth/4G/LAN (optional) Operating temperature -40°C to +60°C, >45°C power derating Permissible humidity 0-100% Max. installation altitude 3,000m Noise level ≤ 55 Protection class (IP) IP65 Inverter topology Non-isolated Overvoltage category OVC II (DC), OVC III (AC) Dimensions (W×H×D) 448x688x270 (excluding connectors and brackets) Weight 46 kg Warranty 5 years / 10 years (warranty period depends on the installation site of the inverter – see Deye's warranty policy) Cooling Intelligent air cooling Grid standards IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-30K-SG02HP3-EUDownload datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-20K-SG01HP3-EU-AM2 hybrid inverter 20 kW 3-phase high-voltage – solar inverter, battery charger, and emergency power in one unit.The Deye SUN-20K-SG01HP3-EU-AM2 is a 20 kW 3-phase high-voltage hybrid inverter that combines a solar inverter, battery charger, and emergency power supply in one unit. With 2 MPPT trackers and up to 40,000 W of connected solar power, it can both work with the grid and continue to power the house if the power goes out. This means that you store your own solar energy in the battery and use it when you need it yourself – instead of selling it cheaply to the grid.Advantages Rated power 20,000 W 2 independent MPPT trackers for flexible string configuration Up to 40,000 W solar power can be connected Max. charge/discharge current 37 A for the battery Peak power in off-grid mode: 1.5 × rated power for 10 s Efficiency up to 97.6% IP65 enclosure class – can be mounted outdoors Built-in LCD display for local operation and monitoring Communication via RS485/RS232/CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Application Solar PV systems with battery storage in private homes and smaller businesses Upgrading of existing solar systems with battery (AC- or DC-coupled) Emergency power and backup during power outages Load shifting – charge the battery when power is cheap and use it when prices peak Three-phase installations, including with unbalanced load between phases Specifications Battery type Lithium-ion Battery voltage range 160-700 V Max. charge current 37 A Max. discharge current 37 A Charging strategy for lithium battery Automatic adaptation to BMS Number of battery inputs 1 Max. connected PV power 40,000 W Max. PV input power 32,000 W Max. PV input voltage 1,000 V Start-up voltage 180 V MPPT voltage range 150-850 V Rated DC input voltage 600 V Max. short-circuit current, input 39+39 A Max. PV operating current 26+26 A Number of MPPT / strings per MPPT 2/2+2 Rated AC input/output power 20,000 W Max. AC input/output power (VA) 22,000 VA Peak power (off-grid) 1.5 × rated power for 10 s Rated AC input/output current 30.4/29 A Max. AC input/output current 33.4/31.9 A Max. continuous AC pass-through (grid to load) 80 A Rated input/output voltage 220/380V，230/400V 0.85Un-1.1Un Grid connection 3L+N+PE Rated grid frequency / range 50Hz/45Hz-55Hz 60Hz/55Hz-65Hz Power factor, adjustment range 0.8 leading to 0.8 lagging Harmonic current distortion (THDi) <3 % (of rated power) DC injection current <0.5 %ln Max. efficiency 97.6 % Euro efficiency 97.0 % MPPT efficiency ＞99 % Built-in protection DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault detection (AFCI) (optional), anti-islanding protection, DC switch, insulation monitoring, residual current monitoring Surge protection Type II(DC), Type II(AC) Communication interface RS485/RS232/CAN Monitoring GPRS/WiFi/Bluetooth/4G/LAN(optional) Display LCD display Operating temperature -40 to +60°C, >45°C derating Permitted humidity 0-100 % Max. installation altitude 2,000m Noise level ≤ 55 dB(A) Enclosure class (IP) IP65 Inverter topology Non-isolated Overvoltage category OVC II(DC), OVC III(AC) Dimensions (W×H×D) 408*638*237 (excl. connectors and brackets) Weight 30.5 kg Warranty 5 years / 10 years (warranty period depends on the inverter's installation location – see Deye's warranty policy) Cooling Intelligent air cooling Grid standards IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G98, G99, VDE-AR-N 4105 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-20K-SG01HP3-EU-AM2Download datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-25K-SG01HP3-EU-AM2 hybrid inverter 25 kW 3-phase high voltage – solar inverter, battery charger and emergency power in one unit.The Deye SUN-25K-SG01HP3-EU-AM2 is a 25 kW 3-phase high-voltage hybrid inverter that combines a solar inverter, battery charger, and emergency power supply in one unit. With 2 MPPT trackers and up to 50,000 W of connected solar power, it can both work with the grid and continue to power the house if the power goes out. This means that you store your own solar power in the battery and use it when you need it yourself – instead of selling it cheaply to the grid.Advantages Nominal power 25,000 W 2 independent MPPT trackers for flexible string configuration Up to 50,000 W of solar power can be connected Max. charge/discharge current 50 A for the battery Peak power in island mode: 1.5 × nominal power for 10 s Efficiency up to 97.6 % IP65 protection class – can be mounted outdoors Built-in LCD display for local operation and monitoring Communication via RS485/RS232/CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Application Solar power systems with battery storage for private homes and small businesses Upgrading existing solar power systems with a battery (AC- or DC-coupled) Emergency power and backup during power outages Load shifting – charge the battery when electricity is cheap and use it when the price peaks Three-phase installations, including with unbalanced load between phases Specifications Battery type Lithium-ion Battery voltage range 160-700 V Max. charge current 50 A Max. discharge current 50 A Charging strategy for lithium battery Automatic adaptation to BMS Number of battery inputs 1 Max. connected PV power 50,000 W Max. PV input power 40,000 W Max. PV input voltage 1,000 V Start-up voltage 180 V MPPT voltage range 150-850 V Nominal DC input voltage 700 V Max. short-circuit current, input 39+39 A Max. PV operating current 26+26 A Number of MPPT / strings per MPPT 2/2+2 Nominal AC input/output power 25,000 W Max. AC input/output power (VA) 27,500 VA Peak power (island mode) 1.5 × nominal power for 10 s Nominal AC input/output current 37.9/36.3 A Max. AC input/output current 41.7/39.9 A Max. continuous AC pass-through (grid to load) 80 A Nominal input/output voltage 220/380V，230/400V 0.85Un-1.1Un Grid connection 3L+N+PE Nominal grid frequency / range 50Hz/45Hz-55Hz 60Hz/55Hz-65Hz Power factor, adjustment range 0.8 leading to 0.8 lagging Total harmonic distortion (THDi) <3 % (at nominal power) DC injection current <0.5 %ln Max. efficiency 97.6 % Euro efficiency 97.0 % MPPT efficiency ＞99 % Built-in protection DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault detection (AFCI) (optional), anti-islanding protection, DC switch, insulation monitoring, residual current monitoring Surge protection Type II(DC), Type II(AC) Communication interface RS485/RS232/CAN Monitoring GPRS/WiFi/Bluetooth/4G/LAN (optional) Display LCD display Operating temperature -40 to +60°C, >45°C derating Permitted humidity 0-100 % Max. installation altitude 2,000m Noise level ≤ 55 dB(A) Protection class (IP) IP65 Inverter topology Non-isolated Overvoltage category OVC II(DC), OVC III(AC) Dimensions (W×H×D) 408*638*237 (excl. connectors and brackets) Weight 30.5 kg Warranty 5 years / 10 years (the warranty period depends on the inverter's installation site – see Deye's warranty policy) Cooling Intelligent air cooling Grid standards IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G98, G99, VDE-AR-N 4105 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-25K-SG01HP3-EU-AM2Download datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-15K-SG01HP3-EU-AM2 hybrid inverter 15 kW 3-phase high voltage – solar inverter, battery charger and emergency power in one unit.The Deye SUN-15K-SG01HP3-EU-AM2 is a 15 kW 3-phase high-voltage hybrid inverter that combines a solar inverter, battery charger, and emergency power supply in a single unit. With 2 MPPT trackers and up to 30,000 W of connected solar power, it can both work in tandem with the electricity grid and supply the house if the power goes out. This means you store your own solar energy in the battery and use it when you actually need it – instead of selling it cheaply to the grid.Advantages Rated power 15,000 W 2 independent MPPT trackers for flexible string configuration Up to 30,000 W solar power can be connected Max. charge/discharge current 37 A to the battery Peak power in off-grid mode: 1.5 × rated power for 10 s Efficiency up to 97.6% Ingress protection IP65 – can be mounted outdoors Built-in LCD display for local operation and monitoring Communication via RS485/RS232/CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Application Solar power systems with battery storage for private homes and small businesses Upgrading existing solar systems with a battery (AC or DC coupled) Emergency power and backup in the event of a power outage Load shifting – charge the battery when power is cheap and use it when prices peak Three-phase installations, including those with unbalanced load between phases Specifications Battery type Lithium-ion Battery voltage range 160-700 V Max. charging current 37 A Max. discharging current 37 A Charging strategy for lithium battery Automatic adaptation to BMS Number of battery inputs 1 Max. connected PV power 30,000 W Max. PV input power 24,000 W Max. PV input voltage 1,000 V Start-up voltage 180 V MPPT voltage range 150-850 V Rated DC input voltage 600 V Max. short-circuit current, input 39+30 A Max. PV operating current 26+20 A Number of MPPT / strings per MPPT 2/2+1 Rated AC input/output power 15,000 W Max. AC input/output power (VA) 16,500 VA Peak power (off-grid) 1.5 × rated power for 10 s Rated AC input/output current 22.8/21.8 A Max. AC input/output current 25/24 A Max. continuous AC pass-through (grid to load) 80 A Rated input/output voltage 220/380V, 230/400V 0.85Un-1.1Un Grid connection 3L+N+PE Rated grid frequency / -range 50Hz/45Hz-55Hz 60Hz/55Hz-65Hz Power factor, adjustment range 0.8 leading to 0.8 lagging Harmonic current distortion (THDi) <3% (of rated power) DC injection current <0.5%In Max. efficiency 97.6% Euro-efficiency 97.0% MPPT efficiency ＞99% Built-in protection DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault detection (AFCI) (optional), islanding protection, DC switch, insulation monitoring, residual current monitoring Overvoltage protection Type II(DC), Type II(AC) Communication interface RS485/RS232/CAN Monitoring GPRS/WiFi/Bluetooth/4G/LAN (optional) Display LCD display Operating temperature -40 to +60°C, >45°C power derating Permissible humidity 0-100% Max. installation altitude 2,000m Noise level ≤ 55 dB(A) Ingress protection (IP) IP65 Inverter topology Transformerless Overvoltage category OVC II(DC), OVC III(AC) Dimensions (W×H×D) 408*638*237 (excl. connectors and brackets) Weight 30.5 kg Warranty 5 years / 10 years (warranty period depends on the installation site of the inverter – see Deye's warranty policy) Cooling Intelligent air cooling Grid standards IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G98, G99, VDE-AR-N 4105 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Part number: SUN-15K-SG01HP3-EU-AM2Download datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-12K-SG01HP3-EU-AM2 12 kW 3-phase high-voltage hybrid inverter – solar inverter, battery charger, and emergency power in one unit.The Deye SUN-12K-SG01HP3-EU-AM2 is a 12 kW 3-phase high-voltage hybrid inverter that combines a solar inverter, battery charger, and emergency power supply into one unit. With 2 MPPT trackers and up to 24,000 W of connected solar power, it can operate in conjunction with the power grid and continue to supply the house if the power fails. This means you store your own solar energy in the battery and use it when you need it yourself – instead of selling it cheaply to the grid.Advantages Rated power 12,000 W 2 independent MPPT trackers for flexible string configuration Up to 24,000 W of solar power can be connected Max. charge/discharge current 37 A for the battery Peak power in off-grid operation: 1.5 × rated power for 10 s Efficiency up to 97.6% IP65 protection class – suitable for outdoor installation Built-in LCD display for local operation and monitoring Communication via RS485/RS232/CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Application Solar power systems with battery storage in private homes and small businesses Upgrading existing solar power systems with a battery (AC or DC coupled) Emergency power and backup during power outages Load shifting – charge the battery when electricity is cheap and use it when prices peak Three-phase installations, including those with phase imbalance Specifications Battery type Lithium-ion Battery voltage range 160-700 V Max. charge current 37 A Max. discharge current 37 A Charging strategy for lithium battery Automatic adaptation to BMS Number of battery inputs 1 Max. connected PV power 24,000 W Max. PV input power 19,200 W Max. PV input voltage 1,000 V Start-up voltage 180 V MPPT voltage range 150-850 V Rated DC input voltage 600 V Max. short-circuit current, input 39+30 A Max. PV operating current 26+20 A Number of MPPT / strings per MPPT 2/2+1 Rated AC input/output power 12,000 W Max. AC input/output power (VA) 13,200 VA Peak power (off-grid) 1.5 × rated power for 10 s Rated AC input/output current 18.2/17.4 A Max. AC input/output current 20/19.2 A Max. continuous AC pass-through (grid to load) 80 A Rated input/output voltage 220/380V，230/400V 0.85Un-1.1Un Grid connection 3L+N+PE Rated grid frequency / range 50Hz/45Hz-55Hz 60Hz/55Hz-65Hz Power factor, adjustment range 0.8 leading to 0.8 lagging Harmonic current distortion (THDi) <3 % (of rated power) DC injection current <0.5 %ln Max. efficiency 97.6 % Euro-efficiency 97.0 % MPPT efficiency ＞99 % Built-in protection DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault detection (AFCI) (optional), anti-islanding protection, DC switch, insulation monitoring, residual current monitoring Surge protection Type II(DC), Type II(AC) Communication interface RS485/RS232/CAN Monitoring GPRS/WiFi/Bluetooth/4G/LAN (optional) Display LCD display Operating temperature -40 to +60°C, >45°C power derating Permissible humidity 0-100 % Max. installation altitude 2,000m Noise level ≤ 55 dB(A) Protection class (IP) IP65 Inverter topology Non-isolated Overvoltage category OVC II(DC), OVC III(AC) Dimensions (W×H×D) 408*638*237 (excl. connectors and brackets) Weight 30.5 kg Warranty 5 years / 10 years warranty period depends on the installation location of the inverter – see Deye's warranty policy Cooling Intelligent air cooling Grid standards IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G98, G99, VDE-AR-N 4105 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-12K-SG01HP3-EU-AM2Download datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-10K-SG01HP3-EU-AM2 hybrid inverter 10 kW 3-phase high voltage – solar inverter, battery charger and emergency power in one unit.The Deye SUN-10K-SG01HP3-EU-AM2 is a 10 kW 3-phase high-voltage hybrid inverter that combines a solar inverter, battery charger, and emergency power supply in one unit. With 2 MPPT trackers and up to 20,000 W of connected solar power, it can both work in tandem with the electricity grid and continue to power the house if the power goes out. This means you store your own solar power in the battery and use it when you actually need it – instead of selling it cheaply to the grid.Advantages Nominal power 10,000 W 2 independent MPPT trackers for flexible string configuration Up to 20,000 W of solar power can be connected Max. charge/discharge current 37 A for the battery Peak power in island mode: 1.5 × nominal power for 10 s Efficiency up to 97.6% Protection class IP65 – can be installed outdoors Built-in LCD display for local operation and monitoring Communication via RS485/RS232/CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Application Solar PV systems with battery storage for private homes and small businesses Upgrading existing solar PV systems with a battery (AC- or DC-coupled) Emergency power and backup during power outages Load shifting – charge the battery when power is cheap and use it when prices peak Three-phase installations, including those with unbalanced loads between phases Specifications Battery type Lithium-ion Battery voltage range 160-700 V Max. charge current 37 A Max. discharge current 37 A Charging strategy for lithium battery Automatic adaptation to BMS Number of battery inputs 1 Max. connected PV power 20,000 W Max. PV input power 16,000 W Max. PV input voltage 1,000 V Start-up voltage 180 V MPPT voltage range 150-850 V Nominal DC input voltage 600 V Max. short-circuit current, input 30+30 A Max. PV operating current 20+20 A Number of MPPT / strings per MPPT 2/1+1 Nominal AC input/output power 10,000 W Max. AC input/output power (VA) 11,000 VA Peak power (island mode) 1.5 × nominal power for 10 s Nominal AC input/output current 15.2/14.5 A Max. AC input/output current 16.7/16 A Max. continuous AC pass-through (grid to load) 40 A Nominal input/output voltage 220/380V, 230/400V 0.85Un-1.1Un Grid connection 3L+N+PE Nominal grid frequency / range 50Hz/45Hz-55Hz 60Hz/55Hz-65Hz Power factor, adjustment range 0.8 capacitive to 0.8 inductive Harmonic current distortion (THDi) <3% (of nominal power) DC injection current <0.5%ln Max. efficiency 97.6% Euro efficiency 97.0% MPPT efficiency >99% Built-in protection Reverse DC polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault detection (AFCI) (optional), islanding protection, DC switch, insulation monitoring, residual current monitoring Surge protection Type II(DC), Type II(AC) Communication interface RS485/RS232/CAN Monitoring GPRS/WiFi/Bluetooth/4G/LAN (optional) Display LCD display Operating temperature -40 to +60°C, >45°C power derating Permissible humidity 0-100% Max. installation altitude 2,000m Noise level ≤ 55 dB(A) Protection class (IP) IP65 Inverter topology Transformerless Overvoltage category OVC II(DC), OVC III(AC) Dimensions (W×H×D) 408*638*237 (excl. connectors and brackets) Weight 30.5 kg Warranty 5 years / 10 years (warranty period depends on the inverter installation site – see Deye's warranty policy) Cooling Intelligent air cooling Grid standards IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G98, G99, VDE-AR-N 4105 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-10K-SG01HP3-EU-AM2Download datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-15K-SG05LP3-EU-SM2 hybrid inverter 15 kW 3-phase – solar inverter, battery charger and backup power in one unit.The Deye SUN-15K-SG05LP3-EU-SM2 is a 15 kW 3-phase hybrid inverter that combines a solar inverter, battery charger and backup power supply in one unit. With 2 MPPT trackers and up to 30,000 W of connected solar power, it can work together with the grid and keep powering your home if there is a power cut. This means you store your own solar power in the battery and use it when you need it – instead of selling it cheaply to the grid.Benefits Rated power 15,000 W 2 independent MPPT trackers for flexible string configuration Up to 30,000 W of solar power can be connected Max. charge/discharge current of 280 A to the battery Peak power in off-grid mode: 2 × rated power for 10 s Efficiency up to 97.6 % IP65 protection rating – can be installed outdoors Built-in LCD display for local operation and monitoring Communication via WiFi, RS485, CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Applications Solar PV systems with battery storage in private homes and small businesses Upgrading existing solar PV systems with a battery (AC- or DC-coupled) Backup power during power cuts Load shifting – charge the battery when electricity is cheap, and use it when the price peaks Three-phase installations, including those with unbalanced loads between the phases Specifications Battery type Lead-acid or lithium-ion Battery voltage range 40-60 V Max. charge/discharge current 280 A Charging strategy for lithium battery Automatic adaptation to BMS Number of battery inputs 2 Max. connected PV power 30,000 W Max. PV input power 24,000 W Max. PV input voltage 800 V Start-up voltage 160 V MPPT voltage range 160-650 V Rated PV input voltage 550 V Max. PV operating current 36+36 A Max. short-circuit current, input 54+54 A Number of MPPTs / strings per MPPT 2/2+2 Rated AC input/output power 15,000 W Max. AC input/output power (VA) 16,500 VA Rated AC input/output current 22.8/21.8 A Max. AC input/output current 25/24 A Max. continuous AC pass-through (grid to load) 70 A Peak power (off-grid mode) 2 × rated power for 10 s Power factor, adjustment range 0.8 leading to 0.8 lagging Rated input/output voltage 220/380V, 230/400V 0.85Un-1.1Un 3L+N+PE Rated grid frequency / range 50/45-55, 60/55-65 Hz Total harmonic current distortion (THDi) <3 % (of rated power) DC injection into grid <0.5 % In Max. efficiency 97,6 % Euro efficiency 97,0 % MPPT efficiency >99 % Built-in protection DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, load overvoltage protection, earth fault monitoring, arc fault detection (AFCI) (optional), grid monitoring, islanding monitoring, earth fault detection, DC input switch, insulation monitoring on DC terminals, residual current detection (RCD), surge protection Surge protection Type II(DC), Type II(AC) Display LCD display Communication interface WiFi, RS485, CAN Operating temperature -40 to +60°C, >45°C derating Permitted humidity 0-100 % Max. installation altitude 3,000m Noise level ＜60 dB Protection rating (IP) IP65 Inverter topology Non-isolated (PV), isolated (battery) Overvoltage category OVC II(DC), OVC III(AC) Dimensions (W×H×D) 456×750×268.5 (excl. connectors and bracket) Weight 51.9 kg Cooling Intelligent air cooling Warranty 5 years / 10 years (the warranty period depends on where the inverter is installed – see Deye's warranty policy) Grid standards IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-15K-SG05LP3-EU-SM2Download datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-6K-SG05LP3-EU-SM2 hybrid inverter 6 kW 3-phase – solar inverter, battery charger and emergency power in one unit.The Deye SUN-6K-SG05LP3-EU-SM2 is a 6 kW 3-phase hybrid inverter that combines a solar inverter, battery charger, and emergency power supply in one unit. With 2 MPPT trackers and up to 12,000 W of connected solar power, it can both work in tandem with the electrical grid and power the house if the power goes out. This means that you store your own solar energy in the battery and use it when you need it – instead of selling it cheaply to the grid.Advantages Rated power 6,000 W 2 independent MPPT trackers for flexible string configuration Up to 12,000 W solar power can be connected Max. charge/discharge current 135 A to the battery Peak power in off-grid mode: 2 × rated power for 10 s Efficiency up to 97.6 % Protection class IP65 – can be mounted outdoors Built-in LCD display for local operation and monitoring Communication via WiFi, RS485, CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Application Solar power systems with battery storage in private homes and small businesses Upgrading existing solar power systems with a battery (AC or DC coupled) Emergency power and backup in case of power outages Load shifting – charge the battery when electricity is cheap, and use it when prices peak Three-phase installations, including those with unbalanced loads between phases Specifications Battery type Lead-acid or lithium-ion Battery voltage range 40-60 V Max. charge/discharge current 135 A Charging strategy for lithium battery Automatic adaptation to BMS Number of battery inputs 1 Max. connected PV power 12,000 W Max. PV input power 9,600 W Max. PV input voltage 800 V Start-up voltage 160 V MPPT voltage range 200-650 V Nominal PV input voltage 550 V Max. PV operating current 20+20 A Max. short-circuit current, input 30+30 A Number of MPPT / strings per MPPT 2/1+1 Nominal AC input/output power 6,000 W Max. AC input/output power (VA) 6,600 VA Nominal AC input/output current 9.1/8.7 A Max. AC input/output current 10/9.6 A Max. continuous AC pass-through (grid to load) 45 A Peak power (off-grid) 2 × rated power for 10 s Power factor, adjustment range 0.8 capacitive to 0.8 inductive Nominal input/output voltage 220/380V, 230/400V 0.85Un-1.1Un 3L+N+PE Nominal grid frequency / range 50/45-55, 60/55-65 Hz Harmonic current distortion (THDi) <3 % (of rated power) DC injection current <0.5 % In Max. efficiency 97.6 % Euro efficiency 97.0 % MPPT efficiency >99 % Built-in protection DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault detection (AFCI) (optional), anti-islanding protection, DC switch, insulation monitoring, residual current monitoring Surge protection Type II(DC), Type II(AC) Display LCD display Communication interface WiFi, RS485, CAN Operating temperature -40 to +60°C, >45°C power derating Permissible humidity 0-100 % Max. installation altitude 3,000m Noise level ≤55 dB Protection class (IP) IP65 Inverter topology Non-isolated (solar), isolated (battery) Overvoltage category OVC II(DC), OVC III(AC) Dimensions (W×H×D) 386×660×250 (excl. connectors and brackets) Weight 35.2 kg Cooling Intelligent air cooling Warranty 5 years / 10 years (warranty period depends on the inverter's installation site – see Deye's warranty policy) Grid standards IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-6K-SG05LP3-EU-SM2Download datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-10K-SG05LP3-EU-SM2 hybrid inverter 10 kW 3-phase – solar inverter, battery charger, and emergency power in one unit.The Deye SUN-10K-SG05LP3-EU-SM2 is a 10 kW 3-phase hybrid inverter that combines a solar inverter, battery charger, and emergency power supply in one unit. With 2 MPPT trackers and up to 20,000 W of connected solar power, it can operate in tandem with the electrical grid and continue to power the house if the power goes out. This means you store your own solar energy in the battery and use it when you actually need it – instead of selling it cheaply to the grid.Advantages Rated power 10,000 W 2 independent MPPT trackers for flexible string configuration Up to 20,000 W of solar power can be connected Max. charging/discharging current 210 A for battery Peak power in off-grid operation: 2 × rated power for 10 s Efficiency up to 97.6% Ingress protection IP65 – can be installed outdoors Built-in LCD display for local operation and monitoring Communication via WiFi, RS485, CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Application Solar power systems with battery storage for private homes and small businesses Upgrading existing solar power systems with a battery (AC or DC coupled) Emergency power and backup during power outages Load shifting – charge the battery when electricity is cheap and use it when prices peak Three-phase installations, including with unbalanced loads between phases Specifications Battery type Lead-acid or lithium-ion Battery voltage range 40-60 V Max. charging/discharging current 210 A Charging strategy for lithium battery Automatic adaptation to BMS Number of battery inputs 1 Max. connected PV power 20,000 W Max. PV input power 16,000 W Max. PV input voltage 800 V Start-up voltage 160 V MPPT voltage range 200-650 V Rated PV input voltage 550 V Max. PV operating current 26+26 A Max. short-circuit current, input 39+39 A Number of MPPT / strings per MPPT 2/2+2 Rated AC input/output power 10,000 W Max. AC input/output power (VA) 11,000 VA Rated AC input/output current 15.2/14.5 A Max. AC input/output current 16.7/16 A Max. continuous AC pass-through (grid to load) 45 A Peak power (off-grid) 2 × rated power for 10 s Power factor, adjustment range 0.8 leading to 0.8 lagging Rated input/output voltage 220/380V, 230/400V 0.85Un-1.1Un 3L+N+PE Rated grid frequency / range 50/45-55, 60/55-65 Hz Harmonic current distortion (THDi) <3% (at rated power) DC injection current <0.5% In Max. efficiency 97.6% Euro-efficiency 97.0% MPPT efficiency >99% Built-in protection DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault detection (AFCI) (optional), anti-islanding protection, DC switch, insulation monitoring, residual current monitoring Surge protection Type II(DC), Type II(AC) Display LCD display Communication interface WiFi, RS485, CAN Operating temperature -40 to +60°C, >45°C derating Permissible humidity 0-100% Max. installation altitude 3,000m Noise level ≤55 dB Ingress protection (IP) IP65 Inverter topology Non-isolated (solar), isolated (battery) Overvoltage category OVC II(DC), OVC III(AC) Dimensions (W×H×D) 386×660×250 (excl. connectors and brackets) Weight 35.2 kg Cooling Intelligent air cooling Warranty 5 years / 10 years (warranty period depends on the inverter's installation location – see Deye's warranty policy) Grid standards IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-10K-SG05LP3-EU-SM2Download datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-8K-SG05LP3-EU-SM2 hybrid inverter 8 kW 3-phase – solar inverter, battery charger, and emergency power in one unit.The Deye SUN-8K-SG05LP3-EU-SM2 is an 8 kW 3-phase hybrid inverter that combines a solar inverter, battery charger, and emergency power supply into one unit. With 2 MPPT trackers and up to 16,000 W of connected solar power, it can both work with the power grid and provide power to the house if the electricity goes out. This means you store your own solar energy in the battery and use it when you actually need it – instead of selling it cheaply to the grid.Advantages Nominal power 8,000 W 2 independent MPPT trackers for flexible string configuration Up to 16,000 W of solar power can be connected Max. charge/discharge current 190 A to the battery Peak power in island mode: 2 × nominal power for 10 s Efficiency up to 97.6% Ingress protection IP65 – can be mounted outdoors Built-in LCD display for local operation and monitoring Communication via WiFi, RS485, CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Application Solar power systems with battery storage for private homes and small businesses Upgrading existing solar power systems with a battery (AC or DC coupled) Emergency power and backup during power outages Load shifting – charge the battery when electricity is cheap and use it when prices peak Three-phase installations, including those with unbalanced load between phases Specifications Battery type Lead-acid or Lithium-ion Battery voltage range 40-60 V Max. charge/discharge current 190 A Charging strategy for lithium battery Automatic adaptation to BMS Number of battery inputs 1 Max. connected PV power 16,000 W Max. PV input power 12,800 W Max. PV input voltage 800 V Start-up voltage 160 V MPPT voltage range 200-650 V Nominal PV input voltage 550 V Max. PV operating current 20+20 A Max. short-circuit current, input 30+30 A Number of MPPT / strings per MPPT 2/1+1 Nominal AC input/output power 8,000 W Max. AC input/output power (VA) 8,800 VA Nominal AC input/output current 12.2/11.6 A Max. AC input/output current 13.4/12.8 A Max. continuous AC pass-through (grid to load) 45 A Peak power (island mode) 2 × nominal power for 10 s Power factor, adjustment range 0.8 capacitive to 0.8 inductive Nominal input/output voltage 220/380V, 230/400V 0.85Un-1.1Un 3L+N+PE Nominal grid frequency / range 50/45-55, 60/55-65 Hz Total harmonic distortion (THDi) <3% (at nominal power) DC injection current <0.5% In Max. efficiency 97.6% Euro-efficiency 97.0% MPPT efficiency >99% Built-in protection Reverse DC polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault detection (AFCI) (optional), islanding protection, DC switch, insulation monitoring, residual current monitoring Surge protection Type II(DC), Type II(AC) Display LCD display Communication interface WiFi, RS485, CAN Operating temperature -40 to +60°C, >45°C power derating Permissible humidity 0-100% Max. installation altitude 3,000m Noise level ≤55 dB Ingress protection (IP) IP65 Inverter topology Non-isolated (solar), isolated (battery) Overvoltage category OVC II(DC), OVC III(AC) Dimensions (W×H×D) 386×660×250 (excl. connectors and brackets) Weight 35.2 kg Cooling Intelligent air cooling Warranty 5 years / 10 years (warranty period depends on the installation site of the inverter – see Deye's warranty policy) Grid standards IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-8K-SG05LP3-EU-SM2Download datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-12K-SG02LP1-EU-AM3 hybrid inverter 12 kW 1-phase – solar inverter, battery charger, and emergency power in one unit.The Deye SUN-12K-SG02LP1-EU-AM3 is a 12 kW 1-phase hybrid inverter that combines a solar inverter, battery charger, and emergency power supply in one unit. With 3 MPPT trackers and up to 24,000 W of connected solar power, it can both work in tandem with the electrical grid and continue to power the house if the power goes out. This means you store your own solar energy in the battery and use it when you actually need it – instead of selling it cheaply to the grid.Advantages Nominal power 12,000 W 3 independent MPPT trackers for flexible string configuration Up to 24,000 W of solar power can be connected Max. charging/discharging current 250 A for the battery Peak power in off-grid mode: 2 × nominal power for 10 s Efficiency up to 97.6 % Ingress protection IP65 – can be mounted outdoors Communication via RS485/RS232/CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Application Solar power systems with battery storage for private homes and small businesses Upgrading existing solar installations with a battery (AC or DC coupled) Emergency power and backup during power outages Load shifting – charge the battery when power is cheap and use it when prices peak Specifications Battery type Lead-acid or lithium-ion Battery voltage range 40-60 V Max. charging current 250 A Max. discharging current 250 A Charging strategy for lithium battery Automatic adaptation to BMS Number of battery inputs 1 Max. connected PV power 24,000 W Max. DC input power 19,200 W Max. DC input voltage 500 V Start voltage 125 V MPPT voltage range 150-425 V Nominal DC input voltage 370 V Max. PV operating current 26+26+26 A Max. short-circuit current, input 44+44+44 A Number of MPPT / strings per MPPT 3/2+2+2 Nominal AC input/output power 12,000 W Max. AC input/output power (VA) 13,200 VA Peak power (off-grid) 2 × nominal power for 10 s Nominal AC input/output current 54.6/52.2 A Max. AC input/output current 54.6/52.2 A Max. continuous AC pass-through (grid to load) 60 A Power factor, adjustment range 0.8 capacitive to 0.8 inductive Nominal input/output voltage 220/230 0.85Un-1.1Un Nominal grid frequency / range 50/45-55, 60/55-65 Hz Grid connection L+N+PE Harmonic current distortion (THDi) <3 % (of nominal power) DC injection current <0.5 %ln Max. efficiency 97.6 % Euro efficiency 96.5 % MPPT efficiency ＞99 % Built-in protection reverse DC polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault detection (AFCI) (optional), anti-islanding protection, DC switch, insulation monitoring, residual current monitoring Surge protection Type II(DC), Type II(AC) Communication interface RS485/RS232/CAN Monitoring GPRS/WiFi/Bluetooth/4G/LAN (optional) Operating temperature -40 to +60°C, >45°C power derating Permissible humidity 0~100 % Max. installation altitude 2,000m Noise level ＜45 Ingress protection (IP) IP65 Inverter topology Non-isolated Overvoltage category OVC II(DC), OVC IV(AC) Dimensions (W×H×D) 420×670×233 (excl. connectors and brackets) Weight 35.6 kg Warranty 5 years / 10 years (warranty period depends on the inverter installation site – see Deye's warranty policy) Cooling Intelligent air cooling Grid standards VDE4105, IEC61727/62116, VDE0126, AS4777.2, CEI 0 21, EN50549-1, G98, G99, C10-11, UNE217002, NBR16149/NBR16150 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-12K-SG02LP1-EU-AM3Download datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-16K -SG01LP1-EU hybrid inverter 16 kW 1-phase – PV inverter, battery charger and emergency power in one unit.The Deye SUN-16K-SG01LP1-EU is a 16 kW 1-phase hybrid inverter that combines a solar PV inverter, battery charger, and emergency power supply in one unit. With 3 MPPT trackers and up to 32,000 W of connected solar power, it can both work in tandem with the power grid and continue to supply power to the house if the grid goes down. This means you store your own solar energy in the battery and use it when you actually need it – instead of selling it cheaply to the grid.Advantages Nominal power 16,000 W 3 independent MPPT trackers for flexible string configuration Up to 32,000 W of solar power can be connected Max. charge/discharge current 290 A to the battery Peak power in off-grid mode: 2 × nominal power for 10 s Efficiency up to 97.6% Ingress protection rating IP65 – can be mounted outdoors Built-in LCD display for local operation and monitoring Communication via WiFi, RS485, CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Applications Solar power systems with battery storage for private homes and small businesses Upgrading existing solar power systems with a battery (AC- or DC-coupled) Emergency power and backup in case of power failure Load shifting – charge the battery when power is cheap and use it when prices peak Specifications Battery type Lead-acid or lithium-ion Battery voltage range 40-60 V Max. charge/discharge current 290 A Charging strategy for lithium battery Automatic adaptation to BMS Number of battery inputs 1 Max. connected PV power 32,000 W Max. PV input power 25,600 W Max. PV input voltage 500 V Start-up voltage 125 V MPPT voltage range 150-425 V Nominal PV input voltage 370 V Max. PV operating current 36+36+36 A Max. short-circuit current, input 54+54+54 A Number of MPPT / strings per MPPT 3/2+2+2 Nominal AC input/output power 16,000 W Max. AC input/output power (VA) 17,600 VA Nominal AC input/output current 72.8/69.6 A Max. AC input/output current 80/76.6 A Max. continuous AC pass-through (grid to consumption) 100 A Peak power (off-grid) 2 × nominal power for 10 s Power factor, adjustment range 0.8 capacitive to 0.8 inductive Nominal input/output voltage 220/230V 0.85Un-1.1Un L+N+PE Nominal grid frequency / range 50/45-55, 60/55-65 Hz Harmonic current distortion (THDi) <3% (at nominal power) DC injection current <0.5%In Max. efficiency 97.6% Euro efficiency 96.5% MPPT efficiency ＞99% Integrated protection Reverse DC polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault detection (AFCI) (optional), anti-islanding protection, DC switch, insulation monitoring, residual current monitoring Surge protection Type II(DC), Type II(AC) Display LCD display Communication interface WiFi, RS485, CAN Operating temperature -40 to +60°C, >45°C power derating Permissible humidity 0~100% Max. installation altitude 3,000 m Noise level ＜55 dB Ingress protection (IP) IP65 Inverter topology Non-isolated (PV), isolated (battery) Overvoltage category OVC II(DC), OVC III(AC) Dimensions (W×H×D) 464×763×282 (excl. connectors and brackets) Weight 54.1 kg Warranty 5 years / 10 years (warranty period depends on the inverter's installation location – see Deye's warranty policy) Cooling Intelligent air cooling Grid standards IEC 61727, IEC 62116, AS 4777.2, NRS 097 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-16K-SG01LP1-EUDownload datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-10K-SG02LP1-EU-AM3 hybrid inverter 10 kW single-phase – solar inverter, battery charger, and emergency power in one unit.The Deye SUN-10K-SG02LP1-EU-AM3 is a 10 kW single-phase hybrid inverter that combines a solar inverter, battery charger, and emergency power supply into one unit. With 3 MPPT trackers and up to 20,000 W of connected solar capacity, it can both work in tandem with the grid and continue to power the house if the electricity goes out. This means you store your own solar energy in the battery and use it when you actually need it – instead of selling it cheaply to the grid.Advantages Nominal power 10,000 W 3 independent MPPT trackers for flexible string configuration Up to 20,000 W solar capacity can be connected Max. charging/discharging current 220 A to the battery Peak power in off-grid mode: 2 × nominal power for 10 s Efficiency up to 97.6 % Protection class IP65 – suitable for outdoor installation Communication via RS485/RS232/CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Application Solar power systems with battery storage for private homes and small businesses Upgrading existing solar systems with a battery (AC- or DC-coupled) Emergency power and backup during power outages Load shifting – charge the battery when electricity is cheap, and use it when the price peaks Specifications Battery type Lead-acid or lithium-ion Battery voltage range 40-60 V Max. charging current 220 A Max. discharging current 220 A Charging strategy for lithium battery Automatic adaptation to BMS Number of battery inputs 1 Max. connected PV power 20,000 W Max. DC input power 16,000 W Max. DC input voltage 500 V Start-up voltage 125 V MPPT voltage range 150-425 V Nominal DC input voltage 370 V Max. PV operating current 26+26+26 A Max. short-circuit current, input 44+44+44 A Number of MPPT / strings per MPPT 3/2+2+2 Nominal AC input/output power 10,000 W Max. AC input/output power (VA) 11,000 VA Peak power (off-grid) 2 × nominal power for 10 s Nominal AC input/output current 45.5/43.5 A Max. AC input/output current 45.5/43.5 A Max. continuous AC pass-through (grid to load) 60 A Power factor, adjustment range 0.8 leading to 0.8 lagging Nominal input/output voltage 220/230 0.85Un-1.1Un Nominal grid frequency / range 50/45-55, 60/55-65 Hz Grid connection L+N+PE Total harmonic distortion (THDi) <3 % (of nominal power) DC injection current <0.5 %ln Max. efficiency 97.6 % Euro efficiency 96.5 % MPPT efficiency >99 % Built-in protection Reverse DC polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault detection (AFCI) (optional), anti-islanding protection, DC switch, insulation monitoring, residual current monitoring Surge protection Type II(DC), Type II(AC) Communication interface RS485/RS232/CAN Monitoring GPRS/WiFi/Bluetooth/4G/LAN (optional) Operating temperature -40 to +60°C, >45°C power derating Permissible humidity 0~100 % Max. installation altitude 2,000m Noise level <45 Protection class (IP) IP65 Inverter topology Non-isolated Overvoltage category OVC II(DC), OVC IV(AC) Dimensions (W×H×D) 420×670×233 (excl. connectors and brackets) Weight 35.6 kg Warranty 5 years / 10 years (warranty period depends on the inverter's installation location – see Deye's warranty policy) Cooling Intelligent air cooling Grid standards VDE4105, IEC61727/62116, VDE0126, AS4777.2, CEI 0 21, EN50549-1, G98, G99, C10-11, UNE217002, NBR16149/NBR16150 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-10K-SG02LP1-EU-AM3Download datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-6K-SG05LP1-EU-AM2-P hybrid inverter 6 kW 1-phase – solar inverter, battery charger and emergency power supply in one unit.The Deye SUN-6K-SG05LP1-EU-AM2-P is a 6 kW 1-phase hybrid inverter that combines a solar inverter, battery charger, and emergency power supply into one unit. With 2 MPPT trackers and up to 12,000 W of connected solar power, it can both work in tandem with the grid and provide backup power to the house if the electricity goes out. This means you can store your own solar energy in the battery and use it when you actually need it – instead of selling it cheaply to the grid.Benefits Rated power 6,000 W 2 independent MPPT trackers for flexible string configuration Up to 12,000 W solar power capacity can be connected Max. charge/discharge current 135 A to battery Peak power in off-grid operation: 2 × rated power for 10 s Efficiency up to 97.6% Protection class IP65 – suitable for outdoor installation Built-in LCD display for local operation and monitoring Communication via WiFi, RS485, CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Application Solar power systems with battery storage for private homes and small businesses Upgrading existing solar power systems with a battery (AC or DC coupled) Emergency power and backup during power outages Load shifting – charge the battery when power is cheap and use it when prices peak Specifications Battery type Lead-acid or lithium-ion Battery voltage range 40-60 V Max. charge/discharge current 135 A Charging strategy for lithium battery Automatic adaptation to BMS Number of battery inputs 1 Max. connected PV power 12,000 W Max. PV input power 9,600 W Max. PV input voltage 500 V Start-up voltage 125 V MPPT voltage range 150-425 V Rated PV input voltage 370 V Max. PV operating current 18+18 A Max. short-circuit current, input 27+27 A Number of MPPT / strings per MPPT 2/1+1 Rated AC input/output power 6,000 W Max. AC input/output power (VA) 6,600 VA Rated AC input/output current 27.3/26.1 A Max. AC input/output current 30/28.7 A Max. continuous AC pass-through (grid to load) 40 A Peak power (off-grid) 2 × rated power for 10 s Rated input/output voltage 220V/230V 0.85Un-1.1Un L+N+PE Rated grid frequency / range 50/45-55, 60/55-65 Hz Power factor, adjustment range 0.8 leading – 0.8 lagging Harmonic current distortion (THDi) <3% (of rated power) DC injection current <0.5%ln Max. efficiency 97.6% Euro-efficiency 96.5% MPPT efficiency >99% Built-in protection Reverse DC polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault detection (AFCI) (optional), anti-islanding protection, DC switch, insulation monitoring, residual current monitoring Surge protection Type II (DC), Type II (AC) Display LCD display Communication interface WiFi, RS485, CAN Operating temperature -40 to +60°C, >45°C derating Permissible humidity 0~100% Max. installation altitude 2,000 m Noise level <45 dB Protection class (IP) IP65 Inverter topology Non-isolated (solar), isolated (battery) Overvoltage category OVC II (DC), OVC III (AC) Dimensions (W×H×D) 330×580×232 (excl. connectors and brackets) Weight 24.9 kg Warranty 5 years / 10 years (warranty period depends on the inverter installation site – see Deye’s warranty policy) Cooling Intelligent air cooling Grid standards IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-6K-SG05LP1-EU-AM2-PDownload datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-5K-SG05LP1-EU-AM2-P hybrid inverter 5 kW single-phase – solar inverter, battery charger, and emergency power in one unit.The Deye SUN-5K-SG05LP1-EU-AM2-P is a 5 kW single-phase hybrid inverter that combines a solar inverter, battery charger, and emergency power supply in one unit. With 2 MPPT trackers and up to 10,000 W of connected solar power, it can both work with the grid and power the house if the power goes out. This means you store your own solar power in the battery and use it when you need it – instead of selling it cheaply to the grid.Advantages Nominal power 5,000 W 2 independent MPPT trackers for flexible string configuration Up to 10,000 W of solar power can be connected Max. charge/discharge current 120 A for the battery Peak power in island mode: 2 × nominal power for 10 s Efficiency up to 97.6% IP65 protection rating – can be mounted outdoors Built-in LCD display for local operation and monitoring Communication via WiFi, RS485, CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Application Solar power systems with battery storage in private homes and small businesses Upgrading existing solar power systems with a battery (AC or DC coupled) Emergency power and backup during power outages Load shifting – charge the battery when power is cheap, and use it when prices peak Specifications Battery type Lead-acid or lithium-ion Battery voltage range 40-60 V Max. charge/discharge current 120 A Charging strategy for lithium battery Automatic adaptation to BMS Number of battery inputs 1 Max. connected PV power 10,000 W Max. PV input power 8,000 W Max. PV input voltage 500 V Start-up voltage 125 V MPPT voltage range 150-425 V Nominal PV input voltage 370 V Max. PV operating current 18+18 A Max. short-circuit current, input 27+27 A Number of MPPT / strings per MPPT 2/1+1 Nominal AC input/output power 5,000 W Max. AC input/output power (VA) 5,500 VA Nominal AC input/output current 22.7/21.7 A Max. AC input/output current 25/23.9 A Max. continuous AC pass-through (grid to load) 35 A Peak power (island mode) 2 × nominal power for 10 s Nominal input/output voltage 220V/230V 0.85Un-1.1Un L+N+PE Nominal grid frequency / range 50/45-55, 60/55-65 Hz Power factor, adjustment range 0.8 leading – 0.8 lagging Total harmonic distortion (THDi) <3% (of nominal power) DC injection current <0.5% In Max. efficiency 97.6% Euro efficiency 96.5% MPPT efficiency >99% Built-in protection DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault detection (AFCI) (optional), islanding protection, DC switch, insulation monitoring, residual current monitoring Overvoltage protection Type II (DC), Type II (AC) Display LCD display Communication interface WiFi, RS485, CAN Operating temperature -40 to +60°C, >45°C power derating Permissible humidity 0~100% Max. installation altitude 2,000m Noise level <45 dB Protection rating (IP) IP65 Inverter topology Non-isolated (solar), isolated (battery) Overvoltage category OVC II (DC), OVC III (AC) Dimensions (W×H×D) 330×580×232 (excl. connectors and brackets) Weight 24.9 kg Warranty 5 years / 10 years (warranty period depends on the inverter's installation location – see Deye's warranty policy) Cooling Intelligent air cooling Grid standards IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-5K-SG05LP1-EU-AM2-PDownload datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-8K-SG05LP1-EU-AM2-P hybrid inverter 8 kW single-phase – PV inverter, battery charger and emergency power in one unit.The Deye SUN-8K-SG05LP1-EU-AM2-P is an 8 kW single-phase hybrid inverter that combines a PV inverter, battery charger, and emergency power supply into one unit. With 2 MPPT trackers and up to 16,000 W of connected solar power, it can operate in parallel with the grid and continue to power the house in the event of a power outage. This means you store your own solar energy in the battery and use it when you actually need it – instead of selling it cheaply to the grid.Advantages Nominal power 8,000 W 2 independent MPPT trackers for flexible string configuration Up to 16,000 W of solar power can be connected Max. charge/discharge current 190 A for the battery Peak power in island mode: 2 × nominal power for 10 s Efficiency up to 97.6 % IP65 ingress protection – suitable for outdoor installation Built-in LCD display for local operation and monitoring Communication via WiFi, RS485, CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Application Solar PV systems with battery storage for private homes and small businesses Upgrading existing solar PV systems with a battery (AC or DC coupled) Emergency power and backup during power outages Load shifting – charge the battery when electricity is cheap and use it when prices peak Specifications Battery type Lead-acid or lithium-ion Battery voltage range 40-60 V Max. charge/discharge current 190 A Charging strategy for lithium battery Automatic adaptation to BMS Number of battery inputs 1 Max. connected PV power 16,000 W Max. PV input power 12,800 W Max. PV input voltage 500 V Start-up voltage 125 V MPPT voltage range 150-425 V Nominal PV input voltage 370 V Max. PV operating current 32+32 A Max. short-circuit current, input 48+48 A Number of MPPT / strings per MPPT 2/2+2 Nominal AC input/output power 8,000 W Max. AC input/output power (VA) 8,800 VA Nominal AC input/output current 36.4/34.8 A Max. AC input/output current 40/38.3 A Max. continuous AC pass-through (grid to load) 50 A Peak power (island mode) 2 × nominal power for 10 s Nominal input/output voltage 220V/230V 0.85Un-1.1Un L+N+PE Nominal grid frequency / range 50/45-55, 60/55-65 Hz Power factor, adjustment range 0.8 capacitive – 0.8 inductive Harmonic current distortion (THDi) <3 % (of nominal power) DC injection current <0.5 %ln Max. efficiency 97.6 % Euro efficiency 96.5 % MPPT efficiency ＞99 % Built-in protection DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault detection (AFCI) (optional), islanding protection, DC switch, insulation monitoring, residual current monitoring Surge protection Type II(DC), Type II(AC) Display LCD display Communication interface WiFi, RS485, CAN Operating temperature -40 to +60°C, >45°C power derating Permitted humidity 0~100 % Max. installation altitude 2,000m Noise level ＜45 dB Ingress protection (IP) IP65 Inverter topology Non-isolated (solar), isolated (battery) Overvoltage category OVC II(DC), OVC III(AC) Dimensions (W×H×D) 330×580×232 (excl. connectors and brackets) Weight 24.9 kg Warranty 5 years / 10 years (warranty period depends on the inverter's installation location – see Deye's warranty policy) Cooling Intelligent air cooling Grid standards IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-8K-SG05LP1-EU-AM2-PDownload datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-3.6K-SG05LP1-EU-AM2-P hybrid inverter 3.6 kW single-phase – solar inverter, battery charger and emergency power in one unit.The Deye SUN-3.6K-SG05LP1-EU-AM2-P is a 3.6 kW single-phase hybrid inverter that combines a solar inverter, battery charger, and emergency power supply in one unit. With 2 MPPT trackers and up to 7,200 W of connected solar power, it can both work with the grid and continue to power the house if the power goes out. This means you store your own solar energy in the battery and use it when you need it yourself – instead of selling it cheaply to the grid.Advantages Nominal power 3,600 W 2 independent MPPT trackers for flexible string configuration Up to 7,200 W of solar power can be connected Max. charge/discharge current 90 A for the battery Peak power in off-grid mode: 2 × nominal power for 10 s Efficiency up to 97.6 % Ingress protection IP65 – can be mounted outdoors Built-in LCD display for local operation and monitoring Communication via WiFi, RS485, CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Application Solar PV systems with battery storage in private homes and small businesses Upgrading existing solar PV systems with battery (AC- or DC-coupled) Emergency power and backup during power outages Load shifting – charge the battery when electricity is cheap and use it when prices peak Specifications Battery type Lead-acid or lithium-ion Battery voltage range 40-60 V Max. charge/discharge current 90 A Lithium battery charging strategy Automatic adaptation to BMS Number of battery inputs 1 Max. connected PV power 7,200 W Max. PV input power 5,760 W Max. PV input voltage 500 V Start-up voltage 125 V MPPT voltage range 150-425 V Nominal PV input voltage 370 V Max. PV operating current 18+18 A Max. short-circuit current, input 27+27 A Number of MPPT / strings per MPPT 2/1+1 Nominal AC input/output power 3,600 W Max. AC input/output power (VA) 3,960 VA Nominal AC input/output current 16.4/15.7 A Max. AC input/output current 18/17.2 A Max. continuous AC pass-through (grid to load) 35 A Peak power (off-grid) 2 × nominal power for 10 s Nominal input/output voltage 220V/230V 0.85Un-1.1Un L+N+PE Nominal grid frequency / range 50/45-55，60/55-65 Hz Power factor, adjustment range 0.8 leading – 0.8 lagging Harmonic current distortion (THDi) <3 % (of nominal power) DC injection current <0.5 %ln Max. efficiency 97.6 % Euro-efficiency 96.5 % MPPT efficiency ＞99 % Integrated protection DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault detection (AFCI) (optional), anti-islanding protection, DC switch, insulation monitoring, residual current monitoring Surge protection Type II(DC), Type II(AC) Display LCD display Communication interface WiFi, RS485, CAN Operating temperature -40 to +60°C, >45°C derating Permissible humidity 0~100 % Max. installation altitude 2,000m Noise level ＜45 dB Ingress protection (IP) IP65 Inverter topology Non-isolated (solar), isolated (battery) Overvoltage category OVC II(DC), OVC III(AC) Dimensions (W×H×D) 330×580×232 (excl. connectors and brackets) Weight 24.9 kg Warranty 5 years / 10 years (warranty period depends on the inverter's installation location – see Deye's warranty policy) Cooling Intelligent air cooling Grid standards IEC 61727, IEC 62116, CEI 0-21, EN 50549，NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-3.6K-SG05LP1-EU-AM2-PDownload datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-6K-SG04LP3-EU – 6kW Three-Phase Hybrid InverterThe Deye SUN-6K-SG04LP3-EU is a compact and versatile 3-phase hybrid inverter with 6kW capacity, 2 MPPT inputs, and support for 48V low-voltage batteries (LiFePO4 and lead-acid). It can operate on-grid, off-grid, and as a backup, making it suitable for both private residences and small commercial installations. With built-in WiFi, a data logger, and advanced battery management, you get an intelligent and future-proof energy solution.Advantages 6kW three-phase hybrid inverter: Stable and powerful 3-phase power for private homes and businesses Low-voltage battery support (48V): Compatible with LiFePO4 and lead-acid batteries High PV input voltage: Up to 550V supports large solar installations 2 independent MPPT inputs: Optimizes solar production with different panel orientations and loads On-grid, off-grid, and backup functions: Operates as a grid-tied inverter, autonomous off-grid inverter, or UPS backup Parallel connection up to 10 units: Enables scaling to meet increasing energy demands Smart monitoring: WiFi, RS485, and CAN port for integration with, e.g., Victron VRM and Home Assistant Generator integration: Compatible with diesel generators in hybrid systems Fast backup switch time (4 ms): Suitable for critical installations like server rooms or production equipment Advanced battery management: Intelligent control of charging and discharging Built-in display and data logger: Status and performance available locally as well as via app and web portal Application Residential installations with or without grid connection Commercial buildings with high energy demands Off-grid solutions for summer houses, cabins, and remote areas Backup power sources for critical systems Integration with existing solar and energy management systems Specifications Specification Details Model Deye SUN-6K-SG04LP3-EU Battery voltage 48V Rated AC output 6,000W PV input power 7,800W Number of MPPT 2 Max. charging current 120A Efficiency Up to 97.6% PV input voltage (max.) 550V Parallel function Up to 10 units Backup switch time < 4 ms Communication WiFi, RS485, CAN Protection Short circuit, overheating IP rating IP65 Operating temperature -25°C to +60°C Dimensions (L×W×H) 42 × 67 × 23.3 cm Weight 30 kg Warranty 10-year manufacturer warranty

Read more less

Deye SUN-12K-SG04LP3-EU – 12kW Three-Phase Hybrid Inverter with Low-Voltage Battery SupportThe Deye SUN-12K-SG04LP3-EU is a powerful three-phase hybrid inverter designed for solar PV systems with battery storage. With a 12kW capacity, 2 MPPT inputs, and 48V battery support, it functions both on-grid and off-grid, ensuring maximum flexibility and optimal energy management.It is compatible with low-voltage batteries (48V LiFePO4 and lead-acid batteries) and can be connected in parallel for up to 10 units, making it suitable for both residential installations and commercial solutions. With 2 independent MPPT inputs and a maximum PV input power of 15,600W, the inverter can handle large solar arrays with high efficiency.Advantages 12kW three-phase hybrid inverter: Stable and powerful 3-phase power for private homes and businesses Low-voltage battery support (48V): Compatible with LiFePO4 and lead-acid batteries High PV input voltage: Up to 550V supports large solar installations 2 independent MPPT inputs: Optimizes solar production with different panel orientations and loads On-grid, off-grid, and backup functions: Functions as a grid-tied inverter, autonomous off-grid inverter, or UPS backup Parallel connection up to 10 units: Enables scaling to meet increasing energy needs Smart monitoring: WiFi, RS485, and CAN port for integration with, among others, Victron VRM and Home Assistant Generator integration: Compatible with diesel generators in hybrid systems Fast backup switch-over time (4 ms): Suitable for critical installations such as server rooms or production equipment Advanced battery management: Intelligent control of charging and discharging Built-in display and data logger: Status and performance locally as well as via app and web portal Application Residential installations with or without grid connection Commercial buildings with high energy demands Off-grid solutions in summer houses, cabins, and remote areas Backup power sources for critical systems Integration with existing solar and energy management systems Specifications Specification Details Model Deye SUN-12K-SG04LP3-EU Battery voltage 48V Rated power 12,000W PV input power 15,600W Number of MPPT 2 (4 strings input) Max. charging current 240A Max. PV operating current 26A + 26A Max. short-circuit current 39A + 39A Efficiency Up to 97.6% PV input voltage (max.) 550V Parallel function Up to 10 units Switch-over time at backup < 4 ms Communication WiFi, RS485, CAN Protection Short circuit, overheating IP rating IP65 Operating temperature -25°C to +60°C Dimensions (L×W×H) 386 × 660 × 250 mm Weight 38 kg Warranty 10-year manufacturer warranty

Read more less

Deye SUN-12K-SG05LP3-EU-SM2 hybrid inverter 12 kW 3-phase – solar inverter, battery charger and emergency power in one unit.The Deye SUN-12K-SG05LP3-EU-SM2 is a 12 kW 3-phase hybrid inverter that combines a solar inverter, battery charger, and emergency power supply into one unit. With 2 MPPT trackers and up to 24,000 W of connected solar power, it can both work in tandem with the grid and supply power to the house if the mains power fails. This means you store your own solar energy in the battery and use it when you actually need it – instead of selling it cheaply back to the grid.Benefits Rated power 12,000 W 2 independent MPPT trackers for flexible string configuration Up to 24,000 W of solar power can be connected Max. charge/discharge current 240 A for the battery Peak power in off-grid mode: 2 × rated power for 10 s Efficiency up to 97.6 % Protection class IP65 – suitable for outdoor mounting Built-in LCD display for local operation and monitoring Communication via WiFi, RS485, CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Application Solar power systems with battery storage in private homes and small businesses Upgrading existing solar installations with a battery (AC or DC coupled) Emergency power and backup during power outages Load shifting – charge the battery when power is cheap and use it during peak price hours Three-phase installations, including those with unbalanced phase loads Specifications Battery type Lead-acid or Lithium-ion Battery voltage range 40-60 V Max. charge/discharge current 240 A Lithium battery charging strategy Automatic adaptation to BMS Number of battery inputs 1 Max. connected PV power 24,000 W Max. PV input power 19,200 W Max. PV input voltage 800 V Start-up voltage 160 V MPPT voltage range 200-650 V Rated PV input voltage 550 V Max. PV operating current 26+26 A Max. short-circuit current, input 39+39 A Number of MPPT / strings per MPPT 2/2+2 Rated AC input/output power 12,000 W Max. AC input/output power (VA) 13,200 VA Rated AC input/output current 18.2/17.4 A Max. AC input/output current 20/19.2 A Max. continuous AC pass-through (grid to load) 45 A Peak power (off-grid) 2 × rated power for 10 s Power factor, adjustment range 0.8 leading to 0.8 lagging Rated input/output voltage 220/380V, 230/400V 0.85Un-1.1Un 3L+N+PE Rated grid frequency / range 50/45-55, 60/55-65 Hz Harmonic current distortion (THDi) <3 % (of rated power) DC injection current <0.5 % In Max. efficiency 97.6 % Euro-efficiency 97.0 % MPPT efficiency >99 % Built-in protection DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault detection (AFCI) (optional), anti-islanding protection, DC switch, insulation monitoring, residual current monitoring Surge protection Type II(DC), Type II(AC) Display LCD display Communication interface WiFi, RS485, CAN Operating temperature -40 to +60°C, >45°C power derating Permissible humidity 0-100 % Max. installation altitude 3,000m Noise level ≤55 dB Protection class (IP) IP65 Inverter topology Non-isolated (solar), isolated (battery) Overvoltage category OVC II(DC), OVC III(AC) Dimensions (W×H×D) 386×660×250 (excl. connectors and brackets) Weight 35.2 kg Cooling Intelligent air cooling Warranty 5 years / 10 years (the warranty period depends on the inverter's installation location – see Deye's warranty policy) Grid standards IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-12K-SG05LP3-EU-SM2Download datasheet (PDF)Official product page at Deye

Read more less

Deye SUN-20K-SG05LP3-EU-SM2 hybrid inverter 20 kW 3-phase – solar inverter, battery charger and backup power in one unit.The Deye SUN-20K-SG05LP3-EU-SM2 is a 20 kW 3-phase hybrid inverter that combines a solar inverter, battery charger and backup power supply in one unit. With 2 MPPT trackers and up to 40,000 W of connected PV power, it can both work together with the grid and keep powering the house if there is a power cut. This means you store your own solar power in the battery and use it when you actually need it – instead of selling it cheaply to the grid.Benefits Rated power 20,000 W 2 independent MPPT trackers for flexible string configuration Up to 40,000 W of PV power can be connected Max. charge/discharge current of 350 A to the battery Peak power in off-grid mode: 2 × rated power for 10 s Efficiency up to 97.6 % IP65 protection rating – can be installed outdoors Built-in LCD display for local operation and monitoring Communication via WiFi, RS485, CAN Ready for remote monitoring via Deye Cloud / SOLARMAN (requires data logger) Applications Solar PV systems with battery storage in private homes and small businesses Upgrading existing solar PV systems with a battery (AC- or DC-coupled) Backup power during power cuts Load shifting – charge the battery when electricity is cheap, and use it when the price peaks Three-phase installations, including those with unbalanced loads between the phases Specifications Battery type Lead-acid or lithium-ion Battery voltage range 40-60 V Max. charge/discharge current 350 A Charging strategy for lithium battery Automatic adaptation to BMS Number of battery inputs 2 Max. connected PV power 40,000 W Max. PV input power 32,000 W Max. PV input voltage 800 V Start-up voltage 160 V MPPT voltage range 160-650 V Rated PV input voltage 550 V Max. PV operating current 36+36 A Max. short-circuit current, input 54+54 A Number of MPPTs / strings per MPPT 2/2+2 Rated AC input/output power 20,000 W Max. AC input/output power (VA) 22,000 VA Rated AC input/output current 30.4/29 A Max. AC input/output current 33.4/31.9 A Max. continuous AC pass-through (grid to load) 70 A Peak power (off-grid mode) 2 × rated power for 10 s Power factor, adjustment range 0.8 leading to 0.8 lagging Rated input/output voltage 220/380V, 230/400V 0.85Un-1.1Un 3L+N+PE Rated grid frequency / range 50/45-55, 60/55-65 Hz Total harmonic current distortion (THDi) <3 % (of rated power) DC injection into grid <0.5 % In Max. efficiency 97,6 % Euro efficiency 97,0 % MPPT efficiency >99 % Built-in protection DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, load overvoltage protection, earth fault monitoring, arc fault detection (AFCI) (optional), grid monitoring, islanding monitoring, earth fault detection, DC input switch, insulation monitoring on DC terminals, residual current detection (RCD), surge protection Surge protection Type II(DC), Type II(AC) Display LCD display Communication interface WiFi, RS485, CAN Operating temperature -40 to +60°C, >45°C derating Permitted humidity 0-100 % Max. installation altitude 3,000m Noise level ＜60 dB Protection rating (IP) IP65 Inverter topology Non-isolated (PV), isolated (battery) Overvoltage category OVC II(DC), OVC III(AC) Dimensions (W×H×D) 456×750×268.5 (excl. connectors and bracket) Weight 51.9 kg Cooling Intelligent air cooling Warranty 5 years / 10 years (the warranty period depends on where the inverter is installed – see Deye's warranty policy) Grid standards IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105 Safety / EMC standards IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 Item number: SUN-20K-SG05LP3-EU-SM2Download datasheet (PDF)Official product page at Deye

Read more less