Victron VE Transfer switch 5KVA/230V – automatic transfer switch between two AC sourcesThe Victron VE Transfer Switch 5 kVA is an automatic transfer switch with two AC inputs and one output. The loads are supplied from input 1 (e.g. shore power or a generator), and if this supply fails or goes outside the voltage or frequency limits, the switch automatically changes over to input 2 – typically an inverter. During the switchover itself, the power is briefly interrupted, so sensitive electronics such as computers may lose data.Benefits Automatic switching: Switches between the two sources without manual operation. Delayed switch-back: Once input 1 has been stable for approx. 10 seconds (adjustable), it switches back – this protects your equipment during short voltage dips. 20 A per input: Rated current of 20 A on both inputs and the output, and motor loads (e.g. air conditioning) of up to 1.3 kW. Auxiliary contact: Together with a MultiPlus and a Digital Multi Control, it can automatically switch the current limit to a preset generator value. Applications Switching between generator and shore power in boats or motorhomes. Switching between inverter and generator or shore power. Giving a MultiPlus access to two AC sources instead of one. Specifications Specification Details Nominal voltage 200–250 V AC, single-phase Nominal frequency 50–60 Hz Rated current, input 1 and 2 20 A Rated output current 20 A Max. motor load (e.g. air conditioning) 1.3 kW Self-consumption, input 1 6 VA Switching time, closing contacts 10–20 ms Switching time, opening contacts 5–20 ms Delay, input 1 Approx. 10 s (adjustable) Auxiliary contact 200–240 V AC, 20 A, cos φ = 1 Operating temperature range -5 to +60 °C Humidity Max. 95% (non-condensing) Circuit breaker (MCB) and residual current device (RCD) Not included – depends on the installation Enclosure rating IP54 Colour RAL 7035 Dimensions 175 × 215 × 120 mm Weight 1.85 kg Item number COS230502100 Download manual (PDF)

Read more less

Victron VE Transfer switch 10KVA/230V – automatic transfer switch between two AC sourcesThe Victron VE Transfer Switch 10 kVA is an automatic transfer switch with two AC inputs and one output. The loads are supplied from input 1 (e.g. shore power or a generator), and if this supply fails or goes outside the voltage or frequency limits, the switch automatically changes over to input 2 – typically an inverter. During the switchover itself, the power is briefly interrupted, so sensitive electronics such as computers may lose data.Benefits Automatic switching: Switches between the two sources without manual operation. Delayed switch-back: Once input 1 has been stable for approx. 10 seconds (adjustable), it switches back – this protects your equipment during short voltage dips. 40 A per input: Rated current of 40 A on both inputs and the output, and motor loads (e.g. air conditioning) of up to 8 kW. Auxiliary contact: Together with a MultiPlus and a Digital Multi Control, it can automatically switch the current limit to a preset generator value. Applications Switching between generator and shore power in boats or motorhomes. Switching between inverter and generator or shore power. Giving a MultiPlus access to two AC sources instead of one. Specifications Specification Details Nominal voltage 200–250 V AC, single-phase Nominal frequency 50–60 Hz Rated current, input 1 and 2 40 A Rated output current 40 A Max. motor load (e.g. air conditioning) 8 kW Self-consumption, input 1 6 VA Switching time, closing contacts 10–20 ms Switching time, opening contacts 5–20 ms Delay, input 1 Approx. 10 s (adjustable) Auxiliary contact 200–240 V AC, 20 A, cos φ = 1 Operating temperature range -5 to +60 °C Humidity Max. 95% (non-condensing) Circuit breaker (MCB) and residual current device (RCD) Not included – depends on the installation Enclosure rating IP54 Colour RAL 7035 Dimensions 175 × 215 × 120 mm Weight 1.65 kg Item number COS230103100 Download manual (PDF)

Read more less

Victron Filax-2 110V/50 Hz-120V/60 Hz – ultra-fast automatic transfer switch for sensitive loadsThe Victron Filax-2 is an ultra-fast automatic AC transfer switch. Normally, the loads are supplied from a priority source such as the grid, shore power or a generator; if the voltage or frequency falls outside the limits, the Filax-2 switches over to an alternative source – typically an inverter – within a maximum of 16 ms, so computers and other sensitive electronics can keep running without interruption. It is not intended for large household appliances such as washing machines or electric motors. This version is for 110 V/50 Hz and 120 V/60 Hz installations – for standard Danish 230 V systems, you need the 230 V version.Benefits Ultra-fast switching: Switches between the sources within a maximum of 16 ms. Monitors voltage and frequency: Switches to the alternative source if the voltage on the priority source is too low or its frequency is too low/high. Automatic switch-back: Switches back to the priority source once it has been within the limits for 30 seconds. Robust enclosure: IP65 ABS enclosure for operation from -20 to +50 °C. Applications Computers, network equipment and industrial controls that must not restart during a power failure. Entertainment electronics in boats or motorhomes when switching between shore power/generator and inverter. Fixed installations where an inverter provides backup for sensitive loads. Specifications Specification Details Nominal voltage and frequency 110 V/50 Hz and 120 V/60 Hz Max. current 16 A Max. switching time (both directions) 16 ms Priority source: switch at low voltage 88 V AC (50 Hz) / 90 V AC (60 Hz) Priority source: switch back at voltage above 92 V AC (50 Hz) / 94 V AC (60 Hz) Priority source: switch at low frequency 45 Hz (50 Hz grid) / 46 Hz (60 Hz grid) Max. continuous input voltage (both sources) 130 V AC Switch-back delay 30 s Operating temperature range -20 to +50 °C Humidity Max. 95% (non-condensing) Enclosure ABS, RAL 7035 (light grey) Enclosure rating IP65 Dimensions (h × w × d) 120 × 255 × 75 mm Weight 0.8 kg Item number SDFI0000110 Download datasheet (PDF)

Read more less

Victron Filax-2 230V/50 Hz-240V/60 Hz – ultra-fast automatic transfer switch for sensitive loadsThe Victron Filax-2 is an ultra-fast automatic AC transfer switch. Normally, the loads are supplied from a priority source such as the grid, shore power or a generator; if the voltage or frequency falls outside the limits, the Filax-2 switches over to an alternative source – typically an inverter – within a maximum of 16 ms, so computers and other sensitive electronics can keep running without interruption. It is not intended for large household appliances such as washing machines or electric motors. This version is for 230 V/50 Hz and 240 V/60 Hz installations.Benefits Ultra-fast switching: Switches between the sources within a maximum of 16 ms. Monitors voltage and frequency: Switches to the alternative source if the voltage on the priority source is too low or its frequency is too low/high. Automatic switch-back: Switches back to the priority source once it has been within the limits for 30 seconds. Robust enclosure: IP65 ABS enclosure for operation from -20 to +50 °C. Applications Computers, network equipment and industrial controls that must not restart during a power failure. Entertainment electronics in boats or motorhomes when switching between shore power/generator and inverter. Fixed installations where an inverter provides backup for sensitive loads. Specifications Specification Details Nominal voltage and frequency 230 V/50 Hz and 240 V/60 Hz Max. current 16 A Max. switching time (both directions) 16 ms Priority source: switch at low voltage 180 V AC Priority source: switch back at voltage above 188 V AC Priority source: switch at low frequency 45 Hz (50 Hz grid) / 46 Hz (60 Hz grid) Max. continuous input voltage (both sources) 260 V AC Switch-back delay 30 s Operating temperature range -20 to +50 °C Humidity Max. 95% (non-condensing) Enclosure ABS, RAL 7035 (light grey) Enclosure rating IP65 Dimensions (h × w × d) 120 × 255 × 75 mm Weight 0.8 kg Item number SDFI0000000 Download datasheet (PDF)

Read more less

Victron Anti-islanding box 63A 3-phase – original Victron accessoryThe Victron Anti-islanding box 63A 3-phase is an original accessory from Victron Energy. It integrates directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages Original Victron accessory: Fits the Victron system directly without modification. Reliable quality: Materials and workmanship designed to withstand marine and vehicle environments. Application Original accessory that fits directly into the Victron system. Motorhomes, boats, summer cottages, and off-grid systems. Safe and reliable installation. Specifications Specification Details Weight 3.185 kg Dimensions (h × w × d) 100 × 380 × 230 mm Part number RCD000300200

Read more less