Victron inverters and inverter/chargers for 12V, 24V, and 48V systems. Choose a model based on battery voltage, power in VA, and whether you also need a built-in battery charger.
Victron Inverter RS Smart 48V/6000VA 230V – pure sine wave inverter for 48 V batteries (without solar input)This item (PIN482600000) is the Victron Inverter RS Smart 48/6000 230V – a powerful pure sine wave inverter that converts power from a 48 V battery into 230 V AC. It has no built-in solar charge controller: solar panels are connected via a separate MPPT controller on the DC side or via a solar inverter on the AC output (AC coupling). Battery and inverter data can be viewed on the built-in display and via Bluetooth in the VictronConnect app.Benefits
Powerful pure sine wave: 6000 VA, 4500 W continuous at 40 °C and 9 kW peak power for 3 seconds to start heavy loads.
Light and efficient: High-frequency design weighing 11 kg, with up to 96.5 % efficiency and a no-load consumption of 20 W.
AC coupling of solar panels: An external solar inverter on the AC output can charge the battery with up to 5000 W (max. 88 A charging current).
Bluetooth and GX connection: Monitor and configure the inverter in VictronConnect, and connect a GX device via VE.Can for remote monitoring in VRM.
Expandable: Up to 12 units can be connected in parallel, and 3-phase systems can be built with up to 4 units per phase.
Applications
Off-grid systems with a 48 V battery bank, where the solar panels charge the battery via separate MPPT controllers.
Systems where a solar inverter is AC-coupled to the inverter's output.
Summer houses, workshops and larger mobile systems that need 230 V from a 48 V battery.
Specifications
Specification
Details
Nominal battery voltage
48 V
DC input range
38–62 V
Rated power
6000 VA
Continuous power at 40 °C
4500 W
Continuous power at 65 °C
3000 W
Peak power
9 kW for 3 sec. / 7 kW for 4 min.
Output voltage
230 V AC ±2 %, 50 Hz (can be set to 60 Hz)
Max. continuous AC current
25 A
Max. efficiency
96.5 % (at 1 kW load)
No-load consumption
20 W
Solar input (MPPT)
No – solar panels are connected via a separate MPPT or AC coupling
Max. AC-coupled solar power
5000 W (external solar inverter on the AC output)
Max. charging current
88 A at 57.6 V
Charging voltage
Programmable 36–60 V (absorption 57.6 V / float 55.2 V by default)
Communication
Bluetooth, VE.Can (GX device) and VE.Direct
Inputs and outputs
Programmable relay, 2 analogue/digital inputs, remote on/off
Parallel and 3-phase operation
Up to 12 units in parallel / 4 units per phase
Enclosure rating
IP21
Operating temperature range
-40 to +65 °C (fan-cooled)
Battery connection
M8 bolts
Dimensions (h × w × d)
425 × 440 × 125 mm
Weight
11 kg
Item number
PIN482600000
Download datasheet (PDF)
Victron Inverter RS Smart Solar 48V/6000W – 48 V inverter with built-in MPPT solar chargerThe Victron Inverter RS Smart Solar 48/6000 is a 6000 VA pure sine wave inverter and an MPPT solar charge controller combined in one enclosure. It converts power from a 48 V battery into 230 V AC and at the same time charges the battery directly from solar panels at up to 450 V. Setup and monitoring are done via Bluetooth in the VictronConnect app or on the built-in display.Benefits
Inverter and solar charger in one: You save a separate MPPT controller, and the installation becomes simpler and more compact.
High PV voltage: The solar input handles up to 450 V DC, so the panels can be connected in series in long strings.
Powerful pure sine wave: 4500 W continuous at 40 °C and 9 kW peak power for 3 seconds to start heavy loads.
Bluetooth and GX connection: Monitor and configure the system in VictronConnect, and connect a GX device via VE.Can for remote monitoring in VRM.
Expandable: Up to 12 units can be connected in parallel, and 3-phase systems can be built with up to 4 units per phase.
Applications
Off-grid systems in summer houses, allotment gardens or workshops with a 48 V battery bank and solar panels.
Larger mobile systems and boats with a 48 V battery system.
Remote installations without a grid connection, where solar panels charge the battery and the inverter supplies 230 V.
Specifications
Specification
Details
Nominal battery voltage
48 V
DC input range
38–62 V
Rated power
6000 VA
Continuous power at 40 °C
4500 W
Continuous power at 65 °C
3000 W
Peak power
9 kW for 3 sec. / 7 kW for 4 min.
Output voltage
230 V AC ±2 %, 50 Hz (can be set to 60 Hz)
Max. continuous AC current
25 A
Max. efficiency
96.5 % (at 1 kW load)
No-load consumption
20 W
Max. PV voltage
450 V DC
PV start-up voltage
120 V DC
Max. total charging current
100 A
Charging voltage
Programmable 36–60 V (absorption 57.6 V / float 55.2 V by default)
Communication
Bluetooth, VE.Can (GX device) and VE.Direct
Inputs and outputs
Programmable relay, 2 analogue/digital inputs, remote on/off
Parallel and 3-phase operation
Up to 12 units in parallel / 4 units per phase
Enclosure rating
IP21
Operating temperature range
-40 to +65 °C (fan-cooled)
Battery connection
M8 bolts
Dimensions (h × w × d)
425 × 440 × 125 mm
Weight
11 kg
Item number
PIN482601000
Download datasheet (PDF)
Victron Phoenix Inverter C 24V/2000W/220 – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter C 24V/2000W/220 is a pure sine wave inverter from Victron Energy that converts battery DC power into 230V AC power. It provides stable 230V power with the same power quality as the mains grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains grid, ensuring that sensitive electronics, motors, and pumps run without issues.Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats that require mains power without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Nominal voltage
24 V
Weight
14 kg
Dimensions (h × w × d)
125 × 255 × 520 mm
Item number
CIN242200000
Download datasheet (PDF)
Victron Phoenix Inverter C 12V/2000W/220 – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter C 12V/2000W/220 is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run without issues.Applications
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats that need mains power without a shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Nominal voltage
12 V
Weight
14 kg
Dimensions (h × w × d)
125 × 255 × 520 mm
Item number
CIN122200000
Download datasheet (PDF)
Victron Phoenix Inverter C 24V/1600W/220 – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter C 24V/1600W/220 is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the mains grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains grid, ensuring sensitive electronics, motors, and pumps run without issues.
Low no-load consumption (14 W): Can be left on without unnecessarily draining the battery.
Input voltage 18.4 - 34 V: Operates stably across the entire battery voltage range.
Application
230V power for refrigerators, coffee machines, and power tools in campers and vans.
Boats, where mains power is needed without a shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 2161X00
Continuous power at 25 °C
1450 W
Continuous power at 40 °C
1300 W
Time-limited power (cold start)
1600 W/1h
Peak power
2100 W/15s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
18.4 - 34 V
Low battery voltage shutdown
18.6 V
Dynamic low voltage shutdown (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
21.8 V
Charged battery detection
28 V
Max. efficiency
91 %
No-load consumption
14 W
ECO mode power threshold
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
25 mm²
AC sockets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
8.9 kg
Dimensions (h × w × d)
117 × 231 × 365
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
24 V
Part number
CIN242160000
Download datasheet (PDF)
Victron Phoenix Inverter C 12V/1600W/220 – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter C 12V/1600W/220 is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the mains grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Benefits
Pure sine wave: Provides the same power quality as the grid, allowing sensitive electronics, motors, and pumps to run without issues.
Low standby consumption (14 W): Can be left on without unnecessarily draining the battery.
Input voltage 9.2 - 17 V: Operates stably throughout the battery's entire voltage range.
Applications
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats that need mains power without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 2161X00
Continuous power at 25 °C
1450 W
Continuous power at 40 °C
1300 W
Time-limited power (cold start)
1600 W/1h
Peak power
2100 W/15s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
9.2 - 17 V
Low battery voltage disconnection
9.3 V
Dynamic low voltage disconnection (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
10.9 V
Charged battery detection
14.0 V
Max. efficiency
91 %
Zero-load consumption
14 W
Power limit for ECO mode
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
50 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
8.9 kg
Dimensions (h × w × d)
117 × 231 × 395
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax × 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
12 V
Part number
CIN122160000
Download datasheet (PDF)
Victron Phoenix Inverter C 12V/1200W/220 – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter C 12V/1200W/220 is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the electrical grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the electrical grid, ensuring that sensitive electronics, motors, and pumps run without issues.
Low no-load consumption (11 W): Can be left on without draining the battery unnecessarily.
Input voltage 9.2 - 17 V: Works stably throughout the battery's entire voltage range.
Application
230V power for refrigerators, coffee machines, and tools in campers and vans.
Boats that require mains power without a shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 2121X10
Continuous power at 25 °C
1150 W
Continuous power at 40 °C
1000 W
Time-limited power (cold start)
1200 W/1h
Peak power
1600 W/15s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
9.2 - 17 V
Low battery voltage disconnection
9.3 V
Dynamic low voltage disconnection (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
10.9 V
Battery charged detection
14.0 V
Max. efficiency
91 %
No-load consumption
11 W
ECO mode power limit
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
35 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
7.2 kg
Dimensions (h × w × d)
117 × 231 × 374
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax × 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
12 V
Part number
CIN122120000
Download datasheet (PDF)
Victron Phoenix Inverter 48V/5000W 220V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 48V/5000W 220V is a pure sine wave inverter from Victron Energy that converts your battery's DC power into 230V AC power. It delivers 5000 VA continuously with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
5000 VA continuous output power: With a peak power of 10000 W, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run without issues.
Up to 95 / 96% efficiency: More of the battery's energy ends up as usable 230V power.
Low idle consumption (18 / 20 W): Can be left on without draining the battery unnecessarily.
Input voltage 37.2 - 68 V: Works stably across the entire battery voltage range.
Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats, where mains power is needed without a shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
37.2 - 68 V
AC output
230Vac ±2%, 50 Hz or 60 Hz ± 0.1% (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
5000 VA
Continuous output power at 40 °C
3700 W
Continuous output power at 65 °C
2800 W
Peak power
10000 W
Output short-circuit current
43.5 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
95 / 96%
Zero-load consumption
18 / 20 W
Zero-load consumption in ECO mode
2.2 / 3.2 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
ECO mode power limit
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan-cooled)
Humidity (non-condensing)
max. 95%.
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Enclosure class
IP21
Battery connection terminals
24V: 2+2 M8 bolts 48V: M8 bolts
Weight
29 kg / 28 kg
Dimensions (h × w × d)
555 × 295 × 160 mm (48V)
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
48 V
Item number
PIN485020000
Download datasheet (PDF)
Victron Phoenix Inverter 2 4V/3000W/220V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 24V/3000W/220V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It delivers 3000 VA continuously with the same power quality as the mains grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
3000 VA continuous output power: With a peak power of 6000 VA, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains grid, so sensitive electronics, motors, and pumps run without issues.
Up to 93 / 94 / 95 % efficiency: More of the battery's energy is converted into usable 230V power.
Low no-load consumption (12 / 13 / 15 W): Can be left on without unnecessarily draining the battery.
Input voltage 8.6 - 34 V: Operates stably across the entire voltage range of the battery.
Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats that require mains power without shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
8.6 - 34 V
AC output
230Vac ±2 %, 50 Hz or 60 Hz ± 0.1 % (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
3000 VA
Continuous output power at 40 °C
2200 W
Continuous output power at 65 °C
1700 W
Peak power
6000 VA
Output short-circuit current
26.0 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
93 / 94 / 95 %
No-load consumption
12 / 13 / 15 W
No-load consumption in ECO mode
1.5 / 1.9 / 2.8 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
ECO mode power limit
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan-cooled)
Humidity (non-condensing)
max. 95 %.
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
12V/24V: 2+2 M8 bolts 48V: M8 bolts
Weight
19 kg
Dimensions (h × w × d)
533 × 285 × 150 mm (12V) / 485 × 285 × 150 mm (24/28 V)
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
24 V
Item number
PIN243020000
Download datasheet (PDF)
Victron Phoenix Inverter 24V/5000W/220V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 24V/5000W/220V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It delivers 5000 VA continuously with the same power quality as the mains grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
5000 VA continuous output power: With a peak power of 10000 W, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains grid, so sensitive electronics, motors, and pumps run without issues.
Up to 95 / 96% efficiency: More of the battery's energy ends up as usable 230V power.
Low standby consumption (18 / 20 W): Can be left on without unnecessarily draining the battery.
Input voltage 8.6 - 34 V: Works stably across the battery's entire voltage range.
Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
8.6 - 34 V
AC output
230Vac ±2 %, 50 Hz or 60 Hz ± 0.1 % (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
5000 VA
Continuous output power at 40 °C
3700 W
Continuous output power at 65 °C
2800 W
Peak power
10000 W
Output short-circuit current
43.5 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
95 / 96 %
Zero-load consumption
18 / 20 W
Zero-load consumption in ECO mode
2.2 / 3.2 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
Power threshold for ECO mode
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95 %.
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Enclosure class
IP21
Battery connection terminals
24V: 2+2 M8 bolts 48V: M8 bolts
Weight
29 kg / 28 kg
Dimensions (h × w × d)
595 × 295 × 160 mm (24V)
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive Directive
ECE R10-5
Nominal voltage
24 V
Item number
PIN245020000
Download datasheet (PDF)
Victron Phoenix Inverter 24V/1600W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 24V/1600W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run without issues.
Low idle consumption (14 W): Can remain switched on without draining the battery unnecessarily.
Input voltage 18.4 - 34 V: Operates stably throughout the battery's entire voltage range.
Applications
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore power connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Item number
PINx × 2161X00
Continuous power at 25 °C
1450 W
Continuous power at 40 °C
1300 W
Time-limited power (cold start)
1600 W/1h
Peak power
2100 W/15s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
18.4 - 34 V
Low battery voltage disconnect
18.6 V
Dynamic low voltage disconnect (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
21.8 V
Charged battery detection
28 V
Max. efficiency
91 %
Zero-load consumption
14 W
ECO mode power threshold
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
25 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
8.9 kg
Dimensions (h × w × d)
117 × 231 × 365
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax × 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
24 V
Item number
PIN242161000
Download datasheet (PDF)
Victron Phoenix Inverter 48V/3000W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 48V/3000W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It delivers 3000 VA continuously with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Benefits
3000 VA continuous output power: With a peak power of 6000 VA, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run without issues.
Up to 93 / 94 / 95 % efficiency: More of the battery's energy ends up as usable 230V power.
Low idle consumption (12 / 13 / 15 W): Can be left on without unnecessarily draining the battery.
Input voltage 37.2 - 68 V: Operates stably throughout the entire battery voltage range.
Application
230V power for refrigerators, coffee machines, and tools in campers and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
37.2 - 68 V
AC output
230Vac ±2 %, 50 Hz or 60 Hz ± 0.1 % (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
3000 VA
Continuous output power at 40 °C
2200 W
Continuous output power at 65 °C
1700 W
Peak power
6000 VA
Short-circuit current at output
26.0 A
Dynamic DC low shut down
load dependant, configurable, see Dynamic cut off chapter
Max. efficiency
93 / 94 / 95 %
Zero-load consumption
12 / 13 / 15 W
Zero-load consumption in ECO mode
1.5 / 1.9 / 2.8 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
Power limit for ECO mode
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95 %.
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
12V/24V: 2+2 M8 bolts 48V: M8 bolts
Weight
19 kg
Dimensions (h × w × d)
533 × 285 × 150 mm (12V) / 485 × 285 × 150 mm (24/28 V)
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
48 V
Item number
PIN483020000
Download datasheet (PDF)
Victron Phoenix Inverter 24V/5000W Smart – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 24V/5000W Smart is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It delivers 5000 VA continuously with the same power quality as the mains, ensuring sensitive electronics, motors, and pumps run smoothly, and built-in Bluetooth allows you to monitor operation and change settings directly from the VictronConnect app.Benefits
5000 VA continuous output power: With a peak power of 10000 W, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Up to 95 / 96% efficiency: More of the battery's energy ends up as usable 230V power.
Low standby consumption (18 / 20 W): Can be left on without unnecessarily draining the battery.
Input voltage 8.6 - 34 V: Works stably throughout the battery's entire voltage range.
Bluetooth built-in: Monitor and configure the inverter from the VictronConnect app.
Application
230V power for refrigerators, coffee makers, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
8.6 - 34 V
AC output
230Vac ±2%, 50 Hz or 60 Hz ± 0.1% (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
5000 VA
Continuous output power at 40 °C
3700 W
Continuous output power at 65 °C
2800 W
Peak power
10000 W
Output short-circuit current
43.5 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
95 / 96%
Zero-load consumption
18 / 20 W
Zero-load consumption in ECO mode
2.2 / 3.2 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
ECO mode power threshold
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95%
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
24V: 2+2 M8 bolts 48V: M8 bolts
Weight
29 kg / 28 kg
Dimensions (h × w × d)
595 × 295 × 160 mm (24V)
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
24 V
Item number
PIN242501000
Download datasheet (PDF)
Victron Phoenix Inverter 12V/3000W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 12V/3000W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It delivers 3000 VA continuously with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
3000 VA continuous output power: With a peak power of 6000 VA, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Up to 93 / 94 / 95 % efficiency: More of the battery's energy ends up as usable 230V power.
Low idle consumption (12 / 13 / 15 W): Can be left on without unnecessarily draining the battery.
Input voltage 9.3 - 17 V: Operates stably throughout the battery's voltage range.
Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
9.3 - 17 V
AC output
230Vac ±2 %, 50 Hz or 60 Hz ± 0.1 % (nonlinear load, crest factor 3:1)
Continuous output power at 25 °C
3000 VA
Continuous output power at 40 °C
2200 W
Continuous output power at 65 °C
1700 W
Peak power
6000 VA
Short-circuit current on output
26.0 A
Dynamic DC low shutdown
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
93 / 94 / 95 %
Zero-load consumption
12 / 13 / 15 W
Zero-load consumption in ECO mode
1.5 / 1.9 / 2.8 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
Power limit for ECO mode
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95 %.
Max. altitude above sea level
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
12V/24V: 2+2 M8 bolts 48V: M8 bolts
Weight
19 kg
Dimensions (h × w × d)
533 × 285 × 150 mm (12V) / 485 × 285 × 150 mm (24/48 V)
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive Directive
ECE R10-5
Nominal voltage
12 V
Item number
PIN123020000
Download datasheet (PDF)
Victron Phoenix Inverter 12V/2000W Smart – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 12V/2000W Smart is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It delivers 2000 VA continuously with the same power quality as the electrical grid, ensuring that sensitive electronics, motors, and pumps run smoothly, while built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
2000 VA continuous output power: With a peak power of 4000 VA, it also handles short-term start-up currents.
Pure sine wave: Provides the same power quality as the electrical grid, ensuring that sensitive electronics, motors, and pumps run without issues.
Up to 92 / 94 / 94% efficiency: More of the battery's energy ends up as usable 230V power.
Low standby consumption (8 / 9 / 11 W): Can be left on without draining the battery unnecessarily.
Input voltage 9.3 - 17 V: Operates stably across the entire battery voltage range.
Built-in Bluetooth: Monitor and configure the inverter from the VictronConnect app.
Applications
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in holiday homes and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
9.3 - 17 V
AC output
230Vac ±2%, 50 Hz or 60 Hz ± 0.1% (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
2000 VA
Continuous output power at 40 °C
1450 W
Continuous output power at 65 °C
1000 W
Peak power
4000 VA
Short-circuit current on output
17.4 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
92 / 94 / 94%
Zero-load consumption
8 / 9 / 11 W
Zero-load consumption in ECO mode
0.6 / 1.3 / 2.1 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
Power limit for ECO mode
adjustable via VictronConnect app
Protection
short circuit on output, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95%
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
M8 bolts
Weight
13 kg
Dimensions (h × w × d)
485 × 219 × 125 mm
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
12 V
Item number
PIN122201000
Download datasheet (PDF)
Victron Phoenix Inverter 12V/3000W Smart – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 12V/3000W Smart is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC. It delivers 3000 VA continuously with the same power quality as the mains, ensuring sensitive electronics, motors, and pumps run smoothly, while built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
3000 VA continuous output power: With a peak power of 6000 VA, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Up to 93 / 94 / 95 % efficiency: More of the battery's energy ends up as usable 230V power.
Low idle consumption (12 / 13 / 15 W): Can be left on without draining the battery unnecessarily.
Input voltage 9.3 - 17 V: Works stably across the entire battery voltage range.
Bluetooth built-in: Monitor and configure the inverter from the VictronConnect app.
Application
230V power for refrigerator, coffee machine, and tools in motorhomes and vans.
Boats that need mains power without shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
9.3 - 17 V
AC output
230Vac ±2 %, 50 Hz or 60 Hz ± 0.1 % (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
3000 VA
Continuous output power at 40 °C
2200 W
Continuous output power at 65 °C
1700 W
Peak power
6000 VA
Output short-circuit current
26.0 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
93 / 94 / 95 %
Zero-load consumption
12 / 13 / 15 W
Zero-load consumption in ECO mode
1.5 / 1.9 / 2.8 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
Power threshold for ECO mode
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95 %
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
12V/24V: 2+2 M8 bolts 48V: M8 bolts
Weight
19 kg
Dimensions (h × w × d)
533 × 285 × 150 mm (12V) / 485 × 285 × 150 mm (24/28 V)
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
12 V
Item number
PIN122300000
Download datasheet (PDF)
Victron Phoenix Inverter.smart 48V/2000 Smart – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter.smart 48V/2000 Smart is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It delivers 2000 VA continuously with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
2000 VA continuous output power: With a peak power of 4000 VA, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Up to 92 / 94 / 94% efficiency: More of the battery's energy ends up as usable 230V power.
Low idle consumption (8 / 9 / 11 W): Can be left on without draining the battery unnecessarily.
Input voltage 37.2 - 68 V: Works stably throughout the battery's entire voltage range.
Built-in Bluetooth: Monitor and configure the inverter from the VictronConnect app.
Application
230V power for refrigerator, coffee machine, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
37.2 - 68 V
AC output
230Vac ±2%, 50 Hz or 60 Hz ± 0.1% (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
2000 VA
Continuous output power at 40 °C
1450 W
Continuous output power at 65 °C
1000 W
Peak power
4000 VA
Output short-circuit current
17.4 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
92 / 94 / 94%
Zero-load consumption
8 / 9 / 11 W
Zero-load consumption in ECO mode
0.6 / 1.3 / 2.1 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
Power limit for ECO mode
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95%
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
M8 bolts
Weight
13 kg
Dimensions (h × w × d)
485 × 219 × 125 mm
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
48 V
Item number
PIN482201000
Download datasheet (PDF)
Victron Phoenix Inverter 12V/1600W Smart – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 12V/1600W Smart is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It delivers 1600 VA continuously with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
1600 VA continuous output power: With a peak power of 3000 VA, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run without issues.
Up to 92 / 94 / 94% efficiency: More of the battery's energy ends up as usable 230V power.
Low idle consumption (8 / 9 / 11 W): Can be left on without draining the battery unnecessarily.
Input voltage 9.3 - 17 V: Operates stably throughout the battery's entire voltage range.
Built-in Bluetooth: Monitor and configure the inverter from the VictronConnect app.
Application
230V power for refrigerator, coffee machine, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
9.3 - 17 V
AC output
230Vac ±2%, 50 Hz or 60 Hz ± 0.1% (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
1600 VA
Continuous output power at 40 °C
1200 W
Continuous output power at 65 °C
800 W
Peak power
3000 VA
Output short-circuit current
13.9 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
92 / 94 / 94%
Zero-load consumption
8 / 9 / 11 W
Zero-load consumption in ECO mode
0.6 / 1.3 / 2.1 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
Power threshold for ECO mode
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95%.
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
M8 bolts
Weight
12 kg
Dimensions (h × w × d)
485 × 219 × 125 mm
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
12 V
Item number
PIN122161000
Download datasheet (PDF)
Victron Phoenix Inverter Smart 24V/2000W – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter Smart 24V/2000W is a pure sine wave inverter from Victron Energy that converts your battery's DC power into 230V AC power. It delivers 2000 VA continuously with the same power quality as the grid, ensuring that sensitive electronics, motors, and pumps run smoothly, while built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
2000 VA continuous output power: With a peak power of 4000 VA, it also handles short-term inrush currents.
Pure sine wave: Provides the same power quality as the grid, so sensitive electronics, motors, and pumps run without issues.
Up to 92 / 94 / 94% efficiency: More of the battery's energy ends up as usable 230V power.
Low standby consumption (8 / 9 / 11 W): Can be left on without unnecessarily draining the battery.
Input voltage 8.6 - 34 V: Works stably across the entire battery voltage range.
Built-in Bluetooth: Monitor and configure the inverter from the VictronConnect app.
Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore power connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
8.6 - 34 V
AC output
230Vac ±2%, 50 Hz or 60 Hz ± 0.1% (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
2000 VA
Continuous output power at 40 °C
1450 W
Continuous output power at 65 °C
1000 W
Peak power
4000 VA
Output short-circuit current
17.4 A
Dynamic DC low shut down
load dependant, configurable, see Dynamic cut off chapter
Max. efficiency
92 / 94 / 94%
Zero-load consumption
8 / 9 / 11 W
Zero-load consumption in ECO mode
0.6 / 1.3 / 2.1 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
ECO mode power limit
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95%.
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
M8 bolts
Weight
13 kg
Dimensions (h × w × d)
485 × 219 × 125 mm
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
24 V
Item number
PIN242201000
Download datasheet (PDF)
Victron Phoenix Inverter, Smart 24V/3000W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter, Smart 24V/3000W/230V is a pure sine wave inverter from Victron Energy that converts your battery's DC power into 230V AC power. It delivers 3000 VA continuously with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly, while built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
3000 VA continuous output power: With a peak power of 6000 VA, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Up to 93 / 94 / 95% efficiency: More of the battery's energy ends up as usable 230V power.
Low idle consumption (12 / 13 / 15 W): Can be left on without draining the battery unnecessarily.
Input voltage 18.4 - 34 V: Operates stably throughout the battery's entire voltage range.
Bluetooth built-in: Monitor and configure the inverter from the VictronConnect app.
Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
18.4 - 34 V
AC output
230Vac ±2 %, 50 Hz or 60 Hz ± 0.1 % (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
3000 VA
Continuous output power at 40 °C
2200 W
Continuous output power at 65 °C
1700 W
Peak power
6000 VA
Output short-circuit current
26.0 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
93 / 94 / 95 %
Zero-load consumption
12 / 13 / 15 W
Zero-load consumption in ECO mode
1.5 / 1.9 / 2.8 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
Power limit for ECO mode
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95 %.
Max. altitude above sea level
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
12V/24V: 2+2 M8 bolts 48V: M8 bolts
Weight
19 kg
Dimensions (h × w × d)
533 × 285 × 150 mm (12V) / 485 × 285 × 150 mm (24/28 V)
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
24 V
Item number
PIN242300000
Download datasheet (PDF)
Victron Phoenix Inverter 48V/5000W/220V Smart – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 48V/5000W/220V Smart is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It delivers 5000 VA continuously with the same power quality as the grid, ensuring sensitive electronics, motors, and pumps run smoothly, and built-in Bluetooth allows you to monitor operation and change settings directly from the VictronConnect app.Advantages
5000 VA continuous output power: With a peak power of 10000 W, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the electrical grid, so sensitive electronics, motors, and pumps run without issues.
Up to 95 / 96% efficiency: More of the battery's energy ends up as usable 230V power.
Low standby consumption (18 / 20 W): Can be left on without draining the battery unnecessarily.
Input voltage 37.2 - 68 V: Operates stably throughout the battery's entire voltage range.
Built-in Bluetooth: Monitor and configure the inverter from the VictronConnect app.
Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
37.2 - 68 V
AC output
230Vac ±2 %, 50 Hz or 60 Hz ± 0.1 % (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
5000 VA
Continuous output power at 40 °C
3700 W
Continuous output power at 65 °C
2800 W
Peak power
10000 W
Output short-circuit current
43.5 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
95 / 96 %
Zero-load consumption
18 / 20 W
Zero-load consumption in ECO mode
2.2 / 3.2 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
Power threshold for ECO mode
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95 %
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
24V: 2+2 M8 bolts 48V: M8 bolts
Weight
29 kg / 28 kg
Dimensions (h × w × d)
555 × 295 × 160 mm (48V)
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive Directive
ECE R10-5
Nominal voltage
48 V
Item number
PIN482500000
Download datasheet (PDF)
Victron Phoenix Inverter.smart 48V/3000W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter.smart 48V/3000W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It delivers 3000 VA continuously with the same power quality as the mains, ensuring sensitive electronics, motors, and pumps run smoothly, while built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
3000 VA continuous output power: With a peak power of 6000 VA, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Up to 93 / 94 / 95 % efficiency: More of the battery's energy ends up as usable 230V power.
Low idle consumption (12 / 13 / 15 W): Can be left on without draining the battery unnecessarily.
Input voltage 37.2 - 68 V: Works stably across the entire battery voltage range.
Built-in Bluetooth: Monitor and configure the inverter from the VictronConnect app.
Application
230V power for refrigerator, coffee machine, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
37.2 - 68 V
AC output
230Vac ±2 %, 50 Hz or 60 Hz ± 0.1 % (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
3000 VA
Continuous output power at 40 °C
2200 W
Continuous output power at 65 °C
1700 W
Peak power
6000 VA
Short-circuit current on output
26.0 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
93 / 94 / 95 %
Zero-load consumption
12 / 13 / 15 W
Zero-load consumption in ECO mode
1.5 / 1.9 / 2.8 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
Power threshold for ECO mode
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95 %.
Max. altitude above sea level
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
12V/24V: 2+2 M8 bolts 48V: M8 bolts
Weight
19 kg
Dimensions (h × w × d)
533 × 285 × 150 mm (12V) / 485 × 285 × 150 mm (24/48 V)
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
48 V
Item number
PIN482300000
Download datasheet (PDF)
Victron Sun Inverter 12/250-15 IEC – pure sine wave inverter for 230V mains powerThe Victron Sun Inverter 12/250-15 IEC is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Up to 87% efficiency: More of the battery's energy ends up as usable 230V power.
Low idle consumption (4.2 W): Can be left on without unnecessarily draining the battery.
Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Continuous power at 25 °C
250 VA
Continuous power at 40 °C
175 W
Peak power
400 W
AC output voltage
230 Vac +/- 3 %
AC output frequency
50 Hz or 60 Hz +/- 0.1 %
DC input voltage range
9.2 - 17 Vdc
Low battery voltage shutdown (adjustable)
9.3 Vdc
Low battery voltage restart & alarm (adjustable)
10.9 Vdc
Battery charged detection voltage (adjustable)
14.0 Vdc
Max. efficiency
87 %
Zero-load consumption
4.2 W
Zero-load consumption in ECO mode
0.8 W
Power limit for ECO mode
adjustable via VictronConnect app
Technology
Pulse Width Modulation (PWM)
Max. PV array voltage
25 Vdc
Max. PV array current
15 A
Max. PV array power
375 W
Solar panel type
36 cell solar panel
PV array voltage to initiate battery charging
voltage that is higher than battery voltage
Charging voltages
adjustable via VictronConnect app
Temperature-compensated charging
Yes, via an optional temperature sensor
Protection
a – f
Operating temperature range
-40 to +60 °C (fan-cooled)
Humidity
max. 95 %
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Material
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross section
10 mm² or AWG
PV connection terminals
screw terminals
Max. PV cable cross section
4 mm² or AWG 12
AC outlets
IEC-320 (male plug included)
Protection class
IP 21
Weight
2.4 kg / 5.3 lbs
Dimensions (h × w × d)
86 × 165 × 260 mm
Remote on/off
Yes, can be used for remotely turning unit on/off, or for battery temperature sensing.
Battery temperature sensor
Use Temperature sensor QUA PMP GX Device or a Smart battery Sense.
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1 / EN/IEC 62109-1
EMC
EN 55014-1 / EN 55014-2
Automotive directive
ECE R10-4 EN 50498
Nominal voltage
12 V
Item number
SIN121251100
Download datasheet (PDF)
Victron Phoenix Inverter 48V/250W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 48V/250W/230V is a pure sine wave inverter from Victron Energy that converts battery DC power into 230V AC power. It provides stable 230V power with the same quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Benefits
Pure sine wave: Provides the same power quality as the mains, allowing sensitive electronics, motors, and pumps to run without issues.
Low idle consumption (8 W): Can be left on without unnecessarily draining the battery.
Input voltage 36.8 - 62 V: Operates stably across the entire battery voltage range.
Applications
230V power for refrigerators, coffee machines, and tools in campers and vans.
Boats that need mains power without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Item number
PINx × 1251X10
Continuous power at 25 °C
250 W
Continuous power at 40 °C
200 W
Time-limited power (cold start)
300 W/15s
Peak power
400 W/2s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
36.8 - 62 V
Low battery voltage shutdown
37.2 V
Dynamic low voltage shutdown (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
43.6 V
Charged battery detection
56 V
Max. efficiency
86 %
Zero-load consumption
8 W
ECO mode power limit
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
10 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
2.7 kg
Dimensions (h × w × d)
86 × 165 × 260 mm
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
48 V
Item number
PIN481251200
Download datasheet (PDF)
Victron Sun Inverter 24/250-10 IEC – pure sine wave inverter for 230V mains powerThe Victron Sun Inverter 24/250-10 IEC is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the electrical grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Benefits
Pure sine wave: Provides the same power quality as the electrical grid, so sensitive electronics, motors, and pumps run without issues.
Up to 88% efficiency: More of the battery's energy ends up as usable 230V power.
Low idle consumption (5.2 W): Can remain on without draining the battery unnecessarily.
Applications
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Continuous power at 25 °C
250 VA
Continuous power at 40 °C
175 W
Peak power
400 W
AC output voltage
230 Vac +/- 3 %
AC output frequency
50 Hz or 60 Hz +/- 0.1 %
DC input voltage range
18.4 - 34.0 Vdc
Low battery voltage shut down (adjustable)
18.6 Vdc
Low battery voltage restart & alarm (adjustable)
21.8 Vdc
Battery charged detection voltage (adjustable)
28.0 Vdc
Max. efficiency
88 %
Zero-load consumption
5.2 W
Zero-load consumption in ECO mode
1.3 W
Power limit for ECO mode
adjustable via VictronConnect app
Technology
Pulse Width Modulation (PWM)
Max. PV array voltage
50 Vdc
Max. PV array current
10 A
Max. PV array power
500 W
Solar panel type
72 cell solar panel or two 36 cell solar panels in series
PV array voltage to initiate battery charging
voltage that is higher than battery voltage
Charging voltages
adjustable via VictronConnect app
Temperature-compensated charging
Yes, via an optional temperature sensor
Protection
a – f
Operating temperature range
(derate 1.25 % per °C above 40 °C)
Humidity
max. 95 %
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Material
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross section
10 mm² or AWG
PV connection terminals
screw terminals
Max. PV cable cross section
4 mm² or AWG 12
AC output sockets
IEC-320 (male plug included)
Protection class
IP 21
Weight
2.4 kg / 5.3 lbs
Dimensions (h × w × d)
3.4 × 6.5 × 10.2 inch
Remote on/off
Yes, can be used for remotely turning unit on/off, or for battery temperature sensing.
Battery temperature sensor
Use Temperature sensor QUA PMP GX Device or a Smart Battery Sense.
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1 / EN/IEC 62109-1
EMC
IEC 61000-6-1 / IEC 61000-6-3
Automotive directive
ECE R10-4 EN 50498
Nominal voltage
24 V
Item number
SIN241251100
Download datasheet (PDF)
Victron Phoenix Inverter 48V/500W/220V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 48V/500W/220V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Low idle consumption (10 W): Can remain switched on without draining the battery unnecessarily.
Input voltage 36.8 - 62 V: Operates stably across the entire voltage range of the battery.
Application
230V power for refrigerators, coffee machines, and tools in campers and vans.
Boats that require mains power without shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 1501X10
Continuous power at 25 °C
450 W
Continuous power at 40 °C
380 W
Time-limited power (cold start)
500 W/1h
Peak power
750 W/3s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
36.8 - 62 V
Low battery voltage disconnect
37.2 V
Dynamic low voltage disconnect (load-dependent)
Yes, see Dynamic cut off chapter.
Restart and alarm for low battery voltage
43.6 V
Charged battery detection
56 V
Max. efficiency
88 %
Zero-load consumption
10 W
Power limit for ECO mode
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power reduction
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
10 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
3.5 kg
Dimensions (h × w × d)
86 × 172 × 275
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
48 V
Part number
PIN481501200
Download datasheet (PDF)
Victron Phoenix Inverter 24V/800W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 24V/800W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run without issues.
Low idle consumption (8 W): Can be left on without unnecessarily draining the battery.
Input voltage 18.4 - 34 V: Operates stably across the entire battery voltage range.
Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats that require mains power without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 1801X10
Continuous power at 25 °C
800 W
Continuous power at 40 °C
650 W
Time-limited power (cold start)
900 W/1h
Peak power
1200 W/15s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
18.4 - 34 V
Low battery voltage disconnect
18.6 V
Dynamic low voltage disconnect (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
21.8 V
Charged battery detection
28 V
Max. efficiency
90 %
Zero-load consumption
8 W
Power threshold for ECO mode
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
16 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
5.5 kg
Dimensions (h × w × d)
105 × 216 × 310
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax × 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
24 V
Part number
PIN241801200
Download datasheet (PDF)
Victron Phoenix Inverter 48V/375W/220V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 48V/375W/220V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Low no-load consumption (9 W): Can be left on without unnecessarily draining the battery.
Input voltage 36.8 - 62 V: Operates stably throughout the battery's entire voltage range.
Application
230V power for refrigerators, coffee makers, and power tools in campers and vans.
Boats that need mains power without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 1371X10
Continuous power at 25 °C
375 W
Continuous power at 40 °C
300 W
Time-limited power (cold start)
450 W/10s
Peak power
600 W/2s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
36.8 - 62 V
Low battery voltage shutdown
37.2 V
Dynamic low voltage shutdown (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage alarm and restart
43.6 V
Charged battery detection
56 V
Max. efficiency
88 %
No-load consumption
9 W
Power limit for ECO mode
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
10 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
3 kg
Dimensions (h × w × d)
86 × 165 × 260
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
48 V
Part number
PIN481371200
Download datasheet (PDF)
Victron Phoenix Inverter 24V/500W/220V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 24V/500W/220V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same quality as the mains grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains grid, ensuring that sensitive electronics, motors, and pumps run without issues.
Low standby consumption (8 W): Can be left on without draining the battery unnecessarily.
Input voltage 18.4 - 34 V: Operates stably across the entire battery voltage range.
Applications
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats, where mains power is needed without a shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Item number
PINx × 1501X10
Continuous power at 25 °C
450 W
Continuous power at 40 °C
380 W
Peak power (cold start)
500 W/1h
Surge power
750 W/3s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
18.4 - 34 V
Low battery voltage disconnect
18.6 V
Dynamic low voltage disconnect (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
21.8 V
Battery charged detection
28 V
Max. efficiency
88 %
Zero-load consumption
8 W
ECO mode power limit
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
10 mm²
AC output sockets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
3.5 kg
Dimensions (h × w × d)
86 × 172 × 275
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
24 V
Item number
PIN241501200
Download datasheet (PDF)
Victron Phoenix Inverter 24V/250W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 24V/250W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains, ensuring sensitive electronics, motors, and pumps run without issues.
Low standby consumption (6 W): Can be left on without unnecessarily draining the battery.
Input voltage 18.4 - 34 V: Operates stably throughout the battery's voltage range.
Applications
230V power for refrigerators, coffee machines, and tools in campers and vans.
Boats, where mains power is needed without shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 1251X10
Continuous power at 25 °C
250 W
Continuous power at 40 °C
200 W
Time-limited power (cold start)
300 W/15s
Peak power
400 W/2s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
18.4 - 34 V
Low battery voltage disconnect
18.6 V
Dynamic low voltage disconnect (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
21.8 V
Charged battery detection
28 V
Max. efficiency
86 %
Zero-load consumption
6 W
Power limit for ECO mode
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
10 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
2.7 kg
Dimensions (h × w × d)
86 × 165 × 260
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
24 V
Part number
PIN241251200
Download datasheet (PDF)
Victron Phoenix Inverter 24V/375W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 24V/375W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same quality as the mains grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains grid, ensuring that sensitive electronics, motors, and pumps run without issues.
Low idle consumption (7 W): Can remain switched on without unnecessarily draining the battery.
Input voltage 18.4 - 34 V: Operates stably across the entire battery voltage range.
Applications
230V power for refrigerators, coffee machines, and tools in campers and vans.
Boats requiring mains power without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 1371X10
Continuous power at 25 °C
375 W
Continuous power at 40 °C
300 W
Timed power (cold start)
450 W/10s
Peak power
600 W/2s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
18.4 - 34 V
Low battery voltage disconnection
18.6 V
Dynamic low voltage disconnection (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
21.8 V
Charged battery detection
28 V
Max. efficiency
88 %
No-load consumption
7 W
ECO mode power limit
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
10 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
3 kg
Dimensions (h × w × d)
86 × 165 × 260
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
24 V
Part number
PIN241371200
Download datasheet (PDF)
Victron Phoenix Inverter 12V/500W Schuko – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 12V/500W Schuko is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the electrical grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Benefits
Pure sine wave: Provides the same power quality as the electrical grid, ensuring that sensitive electronics, motors, and pumps run without issues.
Low idle consumption (7 W): Can be left on without unnecessarily draining the battery.
Input voltage 9.2 - 17 V: Works stably throughout the entire battery voltage range.
Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 1501X10
Continuous power at 25 °C
450 W
Continuous power at 40 °C
380 W
Time-limited power (cold start)
500 W/1h
Peak power
750 W/3s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
9.2 - 17 V
Low battery voltage disconnect
9.3 V
Dynamic low voltage disconnect (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
10.9 V
Charged battery detection
14.0 V
Max. efficiency
86 %
Zero-load consumption
7 W
ECO mode power limit
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max . battery cable cross-section
10 mm²
AC output sockets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
3.5 kg
Dimensions (h × w × d)
86 × 172 × 275
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
12 V
Part number
PIN121501200
Download datasheet (PDF)
Victron Phoenix Inverter 12V/375W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 12V/375W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same quality as the mains grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains grid, ensuring sensitive electronics, motors, and pumps run without issues.
Low no-load consumption (6 W): Can be left on without unnecessarily draining the battery.
Input voltage 9.2 - 17 V: Operates stably across the entire battery voltage range.
Applications
230V power for refrigerators, coffee makers, and power tools in campers and vans.
Boats requiring mains power without a shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 1371X10
Continuous power at 25 °C
375 W
Continuous power at 40 °C
300 W
Peak power (cold start)
450 W/10s
Surge power
600 W/2s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
9.2 - 17 V
Low battery voltage cut-off
9.3 V
Dynamic low voltage cut-off (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
10.9 V
Battery charged detection
14.0 V
Max. efficiency
86 %
Zero-load consumption
6 W
ECO mode power threshold
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
10 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
3 kg
Dimensions (h × w × d)
86 × 165 × 260
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000- 6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
12 V
Part number
PIN121371200
Download datasheet (PDF)
Victron Phoenix Inverter 12V/800W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 12V/800W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the electrical grid, so sensitive electronics, motors, and pumps run without issues.
Low standby consumption (8 W): Can be left on without unnecessary battery drainage.
Input voltage 9.2 - 17 V: Operates stably throughout the battery's entire voltage range.
Applications
230V power for refrigerators, coffee machines, and power tools in campers and vans.
Boats that need mains power without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Item number
PINx × 1801X10
Continuous power at 25 °C
800 W
Continuous power at 40 °C
650 W
Peak power (cold start)
900 W/1h
Surge power
1200 W/15s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
9.2 - 17 V
Low battery voltage disconnect
9.3 V
Dynamic low voltage disconnect (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
10.9 V
Battery charged detection
14.0 V
Max. efficiency
90 %
Zero-load consumption
8 W
ECO mode power limit
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
25 mm²
AC sockets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
5.5 kg
Dimensions (h × w × d)
95 × 231 × 334
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
12 V
Item number
PIN121801200
Download datasheet (PDF)
Victron Phoenix Inverter 12V/250W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 12V/250W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the mains grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains grid, so sensitive electronics, motors, and pumps run without issues.
Low no-load consumption (5 W): Can be left on without unnecessarily draining the battery.
Input voltage 9.2 - 17 V: Operates stably across the entire battery voltage range.
Applications
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 1251X10
Continuous power at 25 °C
250 W
Continuous power at 40 °C
200 W
Timed power (cold start)
300 W/15s
Peak power
400 W/2s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
9.2 - 17 V
Low battery voltage disconnect
9.3 V
Dynamic low voltage disconnect (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
10.9 V
Battery charged detection
14.0 V
Max. efficiency
84 %
Zero-load consumption
5 W
ECO mode power threshold
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
10 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
2.7 kg
Dimensions (h × w × d)
86 × 165 × 260
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
12 V
Part number
PIN121251200
Download datasheet (PDF)
Victron Phoenix Inverter 12V/1600W/230V VE.Direct Schuko – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 12V/1600W/230V VE.Direct Schuko is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Low no-load consumption (14 W): Can remain switched on without unnecessarily draining the battery.
Input voltage 9.2 - 17 V: Works stably throughout the entire voltage range of the battery.
Applications
230V power for refrigerators, coffee makers, and power tools in motorhomes and vans.
Boats where mains power is needed without a shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 2161X00
Continuous power at 25 °C
1450 W
Continuous power at 40 °C
1300 W
Peak power (cold start)
1600 W/1h
Surge power
2100 W/15s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
9.2 - 17 V
Low battery voltage shutdown
9.3 V
Dynamic low voltage shutdown (load dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
10.9 V
Charged battery detection
14.0 V
Max. efficiency
91 %
Zero-load consumption
14 W
Power threshold for ECO mode
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
50 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
8.9 kg
Dimensions (h × w × d)
117 × 231 × 395
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
12 V
Part number
PIN122161200
Download datasheet (PDF)
Victron Inverter 48/800 VE.Direct Schuko – pure sine wave inverter for 230V mains powerThe Victron Inverter 48/800 VE.Direct Schuko is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same quality as the electrical grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Benefits
Pure sine wave: Provides the same power quality as the electrical grid, ensuring that sensitive electronics, motors, and pumps run without issues.
Low standby consumption (9 W): Can remain on without unnecessarily draining the battery.
Input voltage 36.8 - 62 V: Operates stably throughout the battery's entire voltage range.
Applications
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats that need mains power without shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 1801X10
Continuous power at 25 °C
800 W
Continuous power at 40 °C
650 W
Timed power (cold start)
900 W/1h
Peak power
1200 W/15s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
36.8 - 62 V
Low battery voltage shutdown
37.2 V
Dynamic low voltage shutdown (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
43.6 V
Charged battery detection
56 V
Max. efficiency
91 %
Zero-load consumption
9 W
Power limit for ECO mode
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
16 mm²
AC output sockets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
5.5 kg
Dimensions (h × w × d)
105 × 216 × 310
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax × 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Part number
PIN481801200
Victron Phoenix Inverter 48V/1200W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 48V/1200W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run without problems.
Low standby consumption (12 W): Can be left on without unnecessary battery drain.
Input voltage 36.8 - 62 V: Operates stably across the entire battery voltage range.
Application
230V power for refrigerators, coffee makers, and power tools in campers and vans.
Boats, where mains power is needed without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Item number
PINx × 2121X10
Continuous power at 25 °C
1150 W
Continuous power at 40 °C
1000 W
Time-limited power (cold start)
1200 W/1h
Peak power
1600 W/15s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
36.8 - 62 V
Low battery voltage disconnection
37.2 V
Dynamic low voltage disconnection (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
43.6 V
Charged battery detection
56 V
Max. efficiency
92 %
Zero-load consumption
12 W
ECO mode power limit
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue RAL 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
25 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
7.2 kg
Dimensions (h × w × d)
117 × 231 × 333
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Item number
victron-phoenix-inverter-48v-1200w-c91523
Victron Phoenix Inverter 24V/1200W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 24V/1200W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Low no-load consumption (11 W): Can be left on without unnecessarily draining the battery.
Input voltage 18.4 - 34 V: Operates stably across the entire battery voltage range.
Application
230V power for refrigerators, coffee machines, and power tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in holiday homes and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 2121X10
Continuous power at 25 °C
1150 W
Continuous power at 40 °C
1000 W
Time-limited power (cold start)
1200 W/1h
Peak power
1600 W/15s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
18.4 - 34 V
Low battery voltage disconnect
18.6 V
Dynamic low voltage disconnect (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
21.8 V
Charged battery detection
28 V
Max. efficiency
91 %
Zero-load consumption
11 W
Power threshold for ECO mode
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue RAL 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
25 mm²
AC output sockets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
7.2 kg
Dimensions (h × w × d)
117 × 231 × 333
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Part number
victron-phoenix-inverter-24v-1200w-604bd7
Victron Phoenix Inverter 12V/1200W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 12V/1200W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same quality as the utility grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the utility grid, so sensitive electronics, motors, and pumps run without issues.
Low idle consumption (11 W): Can remain switched on without draining the battery unnecessarily.
Input voltage 9.2 - 17 V: Works stably throughout the battery's entire voltage range.
Applications
230V power for refrigerators, coffee machines, and power tools in camper vans and delivery vans.
Boats, where mains power is needed without shore power connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Item number
PINx × 2121X10
Continuous power at 25 °C
1150 W
Continuous power at 40 °C
1000 W
Peak power (cold start)
1200 W/1h
Surge power
1600 W/15s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
9.2 - 17 V
Low battery voltage disconnect
9.3 V
Dynamic low voltage disconnect (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
10.9 V
Charged battery detection
14.0 V
Max. efficiency
91 %
Zero-load consumption
11 W
ECO mode power limit
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue RAL 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
35 mm²
AC sockets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
7.2 kg
Dimensions (h × w × d)
117 × 231 × 374
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Item number
victron-phoenix-inverter-12v-1200w-220v-febc9f
Victron inverters and inverter/chargers for 12V, 24V, and 48V systems. Choose a model based on battery voltage, power in VA, and whether you also need a built-in battery charger.
