Victron inverter/chargers combine an inverter, battery charger, and automatic transfer switch in one unit. The system switches automatically between shore power and battery, ensuring you have 230V wherever you are.
Victron EasySolar-II 48/5000/70-50 GX – inverter and battery charger in one unitThe Victron EasySolar-II 48/5000/70-50 GX is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the campsite fuse from blowing.
Automatic switch: Switches automatically between shore power and battery operation without interruption (50 A).
Pure sine wave: Same power quality as the electrical grid — even for sensitive electronics.
Built-in GX device: Full monitoring and remote control via the VRM Portal without additional hardware.
Application
Motorhomes and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
PowerControl and PowerAssist
Yes
Automatic switch
50 A
Max. AC input current
50 A
Auxiliary output
50 A
Input voltage range
38 – 66 V
Output in inverter mode
output voltage: 230 VAC ± 2 % Frequency: 50 Hz ± 0.1 %
Cont. output power at 25°C
5000 VA
Cont. output power at
3700 W
Cont. output power at 65°C
3000 W
Max. feed-in power
5000 VA
Peak power
9000 W
Max. efficiency
96 %
Zero-load consumption
18 W
AC input
input voltage range: 187-265 VAC input frequency: 45 – 65 Hz
Charge voltage absorption
57.6 V
Charge voltage float
55.2 V
Storage mode
52.8 V
Max. battery charge current
70 A
Battery temperature sensor
optional. Order number: ASS000001000
Programmable (AUX) relay
Yes
Auxiliary power supply
12V / 100 mA
Programmable open collector output
70 V / 100 mA
Temperature sensor
Yes
Analog-digital aux inputs
Yes, 2x
Voltage sense contacts
Yes
Protection
a - g
VE.Bus communication port
for parallel and three-phase operation, remote monitoring and system integration
General purpose communication port
Yes, 2x
Model
MPPT 250/100-Tr
Max. output current
100 A
Max. PV power
5800 W
Max. PV open circuit voltage
250 V
Self-consumption
20 mA
Interfaces
VE.Can, USB, Ethernet, VE.Direct, Wi-Fi
External AC current sensor (optional)
100 A
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan-assisted cooling). Maximum Altitude 2000 m
Humidity (non-condensing)
max. 95 %
Material and color
steel, blue RAL 5012
Protection class
IP22
Battery connection
M8 bolts
230VAC connection
screw terminals 13 mm² (6 AWG)
Weight
31 kg
Dimensions (h × w × d)
565 × 323 × 148 mm
Safety
EN-IEC 62019-1, EN-IEC 6201-2, EN-IEC 60335-1, EN-IEC 60335-2-29
Emission / immunity
IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Uninterruptible power supply (UPS)
IEC 62040-1
Nominal voltage
48 V
Item number
PMP482507010
Download datasheet (PDF)
Victron EasySolar-II GX 24V/3000W/70A-32 MPPT 250/70 – inverter and battery charger in one unitThe Victron EasySolar-II GX 24V/3000W/70A-32 MPPT 250/70 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies your installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the fuse at the campsite or marina from blowing.
Automatic transfer switch: Switches automatically between shore power and battery operation without interruption (32 A).
Pure sine wave: The same power quality as the mains grid — also for sensitive electronics.
Built-in GX device: Full monitoring and remote control via the VRM Portal without extra hardware.
Applications
Motorhomes and boats where both shore power and battery operation need to be handled automatically.
Off-grid and hybrid systems with solar panels and a generator.
Backup power systems and energy storage in homes and businesses.
Specifications
Specification
Details
PowerControl and PowerAssist
Yes
Transfer switch
32 A
Max. AC input current
32 A
Auxiliary output
32 A
Input voltage range
19 - 33 V
Output in inverter mode
Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0.1%
Cont. output power at 25°C
3000 VA
Cont. output power at
2200 W
Cont. output power at 65°C
1700 W
Max. feed-back power
3000 VA
Peak power
5500 W
Max. efficiency
94 %
Zero-load power consumption
13 W
AC input
Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz
Charge voltage, absorption
28.8 V
Charge voltage, float
27.6 V
Storage mode
26.4 V
Max. battery charge current
70 A
Battery temperature sensor
Yes
Programmable (AUX) relay
Yes
Auxiliary power supply
12V / 100 mA
Programmable open collector output
70 V / 100 mA
Temperature sensor
Yes
Analogue/digital aux inputs
Yes, 2x
Voltage sense contacts
Yes
Protection
a - g
VE.Bus communication port
for parallel and three-phase operation, remote monitoring and system integration
General-purpose communication port
Yes, 2x
Model
MPPT 250/70-Tr
Max. output current
70 A
Max. PV power
2000 W
Max. PV open-circuit voltage
250 V
Own consumption
20 mA
Interfaces
VE.Can, USB, Ethernet, VE.Direct, Wi-Fi
External AC current sensor (optional)
100 A
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan-assisted cooling). Maximum altitude 2000 m
Humidity (non-condensing)
max. 95%
Material and colour
steel, blue RAL 5012
Enclosure rating
IP22
Battery connection
M8 bolts / M8 bolts
230VAC connection
screw terminals 13 mm² (6 AWG)
Weight
20 kg
Dimensions (h × w × d)
506 × 275 × 147 mm
Safety
EN-IEC 62019-1, EN-IEC 6201-2, EN-IEC 60335-1, EN-IEC 60335-2-29
Emission / immunity
EN55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Uninterruptible power supply (UPS)
IEC 62040-1
Nominal voltage
24 V
Item number
PMP242307010
Download datasheet (PDF)
Victron EasySolar 12/1600/70-16 230V MPPT 100/50 – inverter and battery charger in one unitThe Victron EasySolar 12/1600/70-16 230V MPPT 100/50 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the campsite fuse from blowing.
Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics.
Applications
Camper vans and boats where both shore power and battery operation must be managed automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
Nominal voltage
12 V
Weight
11 kg
Dimensions (h × w × d)
110 × 214 × 510 mm
Item number
CEP122161000
Download datasheet (PDF)
Victron EasySolar-II 48/4k5/55-32 MPPT 250/70 GX – inverter and battery charger in one unitThe Victron EasySolar-II 48/4k5/55-32 MPPT 250/70 GX is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power, preventing the site's fuse from tripping.
Automatic transfer switch: Switches automatically between shore power and battery operation without interruption (32 A).
Pure sine wave: The same power quality as the mains — also for sensitive electronics.
Built-in GX device: Full monitoring and remote control via the VRM Portal without additional hardware.
Application
Motorhomes and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
PowerControl and PowerAssist
Yes
Automatic transfer switch
32 A
Max. AC input current
32 A
Input voltage range
38 – 60 V
Output in inverter mode
output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0.1%
Cont. output power at 25°C
4 kW
Cont. output power at 40°C
3.7 kW
Cont. output power at 65°C
3 kW
Time-limited power 1 (cold start)
4.5 kW/2h
Time-limited power 2 (cold start)
6 kW/25min
Max. feed-in power
4 kW
Peak power
7 kW/1min
Max. efficiency
95%
Zero-load consumption
20 W
AC input
input voltage range: 187-265 VAC input frequency: 45–65 Hz
Charge voltage absorption
57.6 V
Charge voltage float
55.2 V
Storage mode
52.8 V
Max. battery charge current at 25°C
55 A
Max. battery charge current at 40°C
50 A
Battery temperature sensor
optional. Order number: ASS000001000
Compatible battery chemistries
Lithium, Lead-acid, Zinc-Bromine and more(3)
Auxiliary output
Yes (32 A)
External AC current sensor (optional)
100 A
Programmable relay
Yes
Protection
a - g
VE.Bus communication port
for parallel and three-phase operation, remote monitoring and system integration
General purpose communication port
Yes, 2x
Remote on/off
Yes
GX device interfaces
VE.Can, USB, Ethernet, VE.Direct, Wi-Fi
Operating temperature range
-40 to +65 °C (fan-assisted cooling).
Humidity
Maximum 95%
Max. altitude
2000 m
Model
MPPT 250/70-Tr
Max. output current
70 A
Max. PV power
4000 W
Max. PV open-circuit voltage
250 V
Self-consumption
20 mA
Material and color
steel, blue RAL 5012
Protection class
IP21
Battery connection
M8 bolts
230VAC connection
screw terminals 13 mm² (6 AWG)
Weight
28.8 kg
Dimensions (h × w × d)
591 × 275 × 254 mm
Safety
EN-IEC 62019-1, EN-IEC 6201-2, EN-IEC 60335-1, EN-IEC 60335-2-29
Emission / immunity
EN55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Uninterruptible Power Supply (UPS)
IEC 62040-1
Nominal voltage
48 V
Item number
PMP482457010
Download datasheet (PDF)
Victron EasySolar 24/1600/40 MPPT 100/50 – inverter and battery charger in one unitThe Victron EasySolar 24/1600/40 MPPT 100/50 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power, preventing the site fuse from blowing.
Pure sine wave: Power quality identical to the electrical grid — even for sensitive electronics.
Application
Camper vans and boats, where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
Nominal voltage
24 V
Weight
12 kg
Dimensions (h × w × d)
110 × 214 × 745 mm
Item number
CEP242161010
Download datasheet (PDF)
Victron EasySolar-II GX 48V/3000W/35A-32 MPPT 250/70 – inverter and battery charger in one unitThe Victron EasySolar-II GX 48V/3000W/35A-32 MPPT 250/70 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies your installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the fuse at the campsite or marina from blowing.
Pure sine wave: The same power quality as the mains grid — also for sensitive electronics.
Built-in GX device: Full monitoring and remote control via the VRM Portal without extra hardware.
Applications
Motorhomes and boats where both shore power and battery operation need to be handled automatically.
Off-grid and hybrid systems with solar panels and a generator.
Backup power systems and energy storage in homes and businesses.
Specifications
Specification
Details
Nominal voltage
48 V
Weight
26 kg
Dimensions (h × w × d)
237 × 268 × 499 mm
Item number
PMP482307010
Download datasheet (PDF)
Victron Quattro inverter/charger 48V/8000W/110A – inverter and battery charger in one unitThe Victron Quattro inverter/charger 48V/8000W/110A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the campsite fuse from blowing.
Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics.
Application
Motorhomes and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
Nominal voltage
48 V
Weight
44 kg
Dimensions (h × w × d)
280 × 350 × 470 mm
Item number
QUA488024000
Download datasheet (PDF)
Victron Quattro-II 48V/5000W/70A-50/50 – inverter and battery charger in one unitThe Victron Quattro-II 48V/5000W/70A-50/50 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power, preventing the site's circuit breaker from tripping.
Pure sine wave: Same power quality as the electrical grid — also for sensitive electronics.
Application
Camper vans and boats, where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
PowerControl / PowerAssist
Yes
AC input
Input frequency: 45 - 65 Hz
Max. feed-through current
50 A
Input voltage range
38 – 66 V
Output in inverter mode
Frequency: 50 Hz ± 0.1 %
Cont. output power at 25°C / 77°F
5000 VA
Cont. output power at 40°C / 104°F
3700 W
Cont. output power at 65°C / 150°F
3000 W
Max. feed-in power
5000 VA
Peak power
9000 W
Max. efficiency
96 %
Zero-load consumption
18 W
Absorption charge voltage
57.6 V
Float charge voltage
55.2 V
Storage mode
52.8 V
House battery charge current
70 A
Auxiliary output
Yes (32 A)
Programmable relay
Yes
Protection
a - g
VE.Bus communication port
for parallel and three-phase operation, remote monitoring, and system integration
General purpose com. port
Yes, 2x
Common Characteristics
Operating temp.: -40 to +65 °C (-40 – 150°F) / (fan-assisted cooling) / Humidity (non-condensing): max. 95 % / Maximum Altitude 2000 m
Material and color
steel, blue RAL 5012 / Protection category: IP21 / Pollution degree 2, OVC3
Battery connections
M8 bolts
230 VAC connections
screw terminals 13 mm² (6 AWG)
Weight
29 kg
Dimensions (h × w × d)
565 × 320 × 148 mm
Safety
EN 60335-1, EN 60335-2-29, IEC62109-1, IEC62109-2
Emission / immunity
EN 55014-1, EN 55014-2, / EN-IEC 61000-3-2, EN-IEC 61000-3-3 / IEC 61000-6-1, EN 61000-6-2, / EN 61000-6-3
Emergency power supply (UPS)
Please consult certificates on our website.
Anti-islanding
Please consult certificates on our website.
Nominal voltage
48 V
Item number
QUA482504010
Download datasheet (PDF)
Victron Quattro inverter/charger 48V/15000W/200A – inverter and battery charger in one unitThe Victron Quattro inverter/charger 48V/15000W/200A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the site fuse from blowing.
Pure sine wave: The same power quality as the grid — also for sensitive electronics.
Application
Motorhomes and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
Nominal voltage
48 V
Weight
94.5 kg
Dimensions (h × w × d)
344 × 488 × 572 mm
Item number
QUA483150000
Download datasheet (PDF)
Victron Quattro inverter/charger 24V/5000W/120A – inverter and battery charger in one unitThe Victron Quattro inverter/charger 24V/5000W/120A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the campsite fuse from blowing.
Pure sine wave: Same power quality as the grid — even for sensitive electronics.
Application
Motorhomes and boats, where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Backup power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
Nominal voltage
24 V
Weight
33 kg
Dimensions (h × w × d)
340 × 328 × 444 mm
Item number
QUA245021010
Download datasheet (PDF)
Victron Quattro inverter/charger 12V/3000W/120A – inverter and battery charger in one unitThe Victron Quattro inverter/charger 12V/3000W/120A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the site's circuit breaker from tripping.
Pure sine wave: Same power quality as the mains — even for sensitive electronics.
Applications
Motorhomes and boats where both shore power and battery operation must be managed automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
Nominal voltage
12 V
Weight
22 kg
Dimensions (h × w × d)
218 × 258 × 362 mm
Item number
QUA123020010
Download datasheet (PDF )
Victron Quattro inverter/charger 48V/10000W/140A – inverter and battery charger in one unitThe Victron Quattro inverter/charger 48V/10000W/140A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the site fuse from tripping.
Pure sine wave: Same power quality as the grid — also for sensitive electronics.
Applications
Motorhome and boat, where both shore power and battery operation must be managed automatically.
Off-grid and hybrid systems with solar panels and generator.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
Nominal voltage
48 V
Weight
45 kg
Dimensions (h × w × d)
280 × 350 × 470 mm
Item number
QUA481030010
Download datasheet (PDF)
Victron Quattro inverter/charger 24V/8000W/200A – inverter and battery charger in one unitThe Victron Quattro inverter/charger 24V/8000W/200A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the campsite fuse from blowing.
Pure sine wave: The same power quality as the electrical grid — also for sensitive electronics.
Application
Motorhomes and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
Nominal voltage
24 V
Weight
44 kg
Dimensions (h × w × d)
280 × 350 × 470 mm
Item number
QUA248020010
Download datasheet (PDF)
Victron Quattro inverter/charger 24V/3000W/70A – inverter and battery charger in one unitThe Victron Quattro inverter/charger 24V/3000W/70A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power, preventing the site fuse from blowing.
Pure sine wave: The same power quality as the electrical grid — also for sensitive electronics.
Application
Campervans and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
Nominal voltage
24 V
Weight
22 kg
Dimensions (h × w × d)
218 × 258 × 362 mm
Item number
QUA243020010
Download datasheet (PDF)
Victron Quattro inverter/charger 12V/5000W/220A – inverter and battery charger in one unitThe Victron Quattro inverter/charger 12V/5000W/220A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power, preventing the site fuse from blowing.
Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics.
Application
Campervans and boats where both shore power and battery operation need to be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
Nominal voltage
12 V
Weight
31.9 kg
Dimensions (h × w × d)
280 × 350 × 470 mm
Part number
QUA125020000
Download datasheet (PDF)
Victron Quattro 48V/5000W/70A-100/100 – inverter and battery charger in one unitThe Victron Quattro 48V/5000W/70A-100/100 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the campsite fuse from blowing.
Pure sine wave: Same power quality as the grid — also for sensitive electronics.
Application
Campervans and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
Nominal voltage
48 V
Weight
35 kg
Dimensions (h × w × d)
240 × 328 × 444 mm
Item number
QUA485021010
Download datasheet (PDF)
Victron MultiPlus-II 48V/8000W/110/100 – inverter and battery charger in one unitThe Victron MultiPlus-II 48V/8000W/110/100 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It delivers 8000 VA of pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
8000 VA output power: Peak power of 15000 W for motor starting and short-term loads.
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power, preventing the site's fuse from tripping.
Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics.
Application
Motorhomes and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for homes and businesses.
Specifications
Specification
Details
PowerControl / PowerAssist
Yes
AC input
Input voltage range: 187 - 265VAC, / Input frequency: 45 - 65 Hz
Max. feed-through current
100 A
Input voltage range
38 - 66 V
Output
Output voltage: 230VAC ± 2 % / Frequency: 50 Hz ± 0.1 %
Continuous output power at 25 °C
8000 VA
Continuous output power at 40 °C
5500 W
Continuous output power at 65 °C
4000 W
Max. feed-in power
8000 VA
Peak power
15000 W
Max. efficiency
95 %
Zero-load consumption
29 W
Charge voltage absorption
57.6 V
Charge voltage float
55.2 V
Storage mode
52.8 V
Charge current house battery
110 A
Auxiliary output
Yes (50 A)
External AC current sensor (optional)
100 A
Programmable relay
Yes
Protection
a - g
VE.Bus communication port
Three-phase and parallel(6) operation, remote monitoring and system integration
General purpose com. port
Yes, 2x
Common characteristics
Operating temp.: -40 to +65 °C (-40 – 150°F) / (fan-assisted cooling) / Humidity (non-condensing): max. 95 % / Maximum altitude: 2000 m
Material and color
Steel, blue RAL 5012 / Pollution degree 2, OVC3
Pollution degree
OVC3
Protection class
IP 22
Battery connections
Four M8 bolts (2 positive and 2 negative connections)
AC connections
Bolts M6
Weight
41.2 kg
Dimensions (h × w × d)
642 × 363 × 206 mm
Safety
EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2
Emission / immunity
EN 55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Uninterruptible power supply (UPS)
Please consult certificates on our website.
Anti-islanding
Please consult certificates on our website.
Nominal voltage
48 V
Item number
PMP482805000
Download datasheet (PDF)
Victron Quattro-II inverter/charger 24V/5000W/120A – inverter and battery charger in one unitThe Victron Quattro-II inverter/charger 24V/5000W/120A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the circuit breaker at the site from tripping.
Pure sine wave: Same power quality as the grid — even for sensitive electronics.
Application
Camper vans and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in homes and businesses.
Specifications
Specification
Details
PowerControl / PowerAssist
Yes
AC input
input voltage range: 187 - 265VAC
Max. feed-through current
50 A
Input voltage range
19 – 33 V
Output in inverter mode
output voltage: 230VAC ± 2 %
Cont. output power at 25°C / 77°F
5000 VA
Cont. output power at 40°C / 104°F
3700 W
Cont. output power at 65°C / 150°F
3000 W
Max. feed-in power
5000 VA
Peak power
9000 W
Max. efficiency
96 %
Zero-load consumption
18 W
Charge voltage absorption
28.8 V
Charge voltage float
27.6 V
Storage mode
26.4 V
Charge current house battery
120 A
Auxiliary output
Yes (32 A)
Programmable relay
Yes
Protection
a - g
VE.Bus communication port
for parallel and three-phase operation, remote monitoring and system integration
General purpose com. port
Yes, 2x
Common Characteristics
Operating temp.: -40 to +65 °C (-40 – 150°F) / (fan-assisted cooling) / Humidity (non-condensing): max. 95 % / Maximum Altitude 2000 m
Material and color
steel, blue RAL 5012 / Protection category: IP21 / Pollution degree 2, OVC3
Battery connections
M8 bolts
230 VAC connections
screw terminals 13 mm² (6 AWG)
Weight
31 kg
Dimensions (h × w × d)
607 × 329 × 149 mm
Safety
EN 60335-1, EN 60335-2-29, IEC62109-1, IEC62109-2
Emission / immunity
EN 55014-1, EN 55014-2, / EN-IEC 61000-3-2, EN-IEC 61000-3-3 / IEC 61000-6-1, EN 61000-6-2, / EN 61000-6-3
Emergency power supply (UPS)
Please consult certificates on our website.
Anti-islanding
Please consult certificates on our website.
Nominal voltage
24 V
Item number
QUA242505010
Download datasheet (PDF)
Victron MultiPlus-II 48/6k5/100-50 – inverter and battery charger in one unitThe Victron MultiPlus-II 48/6k5/100-50 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It delivers 6 kW of pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
6 kW output power: Peak power of 11 kW/1min for motor starting and short-term loads.
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the campsite fuse from blowing.
Pure sine wave: Same power quality as the grid — also for sensitive electronics.
Applications
Camper vans and boats, where both shore power and battery operation must be managed automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
PowerControl / PowerAssist
Yes
AC input
input voltage range: 187 - 265VAC
Max. feed-through current
50 A
Max. AC input current
50 A
DC input voltage range
38 - 60 V
AC output
output voltage: 230VAC ± 2 %
Continuous output power at 25 °C
6 kW
Continuous output power at 40 °C
5.7 kW
Continuous output power at 65 °C
4.6 kW
Time-limited power 1 (cold start)
6.5 kW/4h
Time-limited power 2 (cold start)
8 kW/1h
Max. feed-in power
6 kW
Peak power
11 kW/1min
Max. efficiency
96 %
Zero-load consumption
28 W
Charge voltage absorption
57.6 V
Charge voltage float
55.2 V
Storage mode
52.8 V
Max. battery charge current at 25 °C
100 A
Max. battery charge current at 40 °C
95 A
Battery temperature sensor
optional. Order number: ASS000001000
Compatible battery chemistries
Lithium, Lead-acid and more (3)
Auxiliary output
Yes (32 A)
External AC current sensor (optional)
100 A
Programmable relay
Yes
Protection
a - g
VE.Bus communication port
Three-phase and parallel operation, remote monitoring and system integration
General-purpose communication port
Yes, 2x
Operating temperature range
-40 to +65 °C (-40 – 150°F), fan-assisted cooling
Max. humidity
95 % (non-condensing)
Max. altitude
4000 m with 1 %/100 m power derating above 2000 m
Material and color
steel, blue RAL 5012
Protection class
IP 21
Battery connections
One positive M8 bolt and one negative M8 bolt
AC connections
screw terminals 13 mm² (6 AWG)
Weight
29 kg
Dimensions (h × w × d)
644 × 320 × 150 mm
Safety
EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2
Emission / immunity
EN 55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Uninterruptible Power Supply (UPS)
IEC 62040
Anti-islanding
IEC 62116
Nominal voltage
48 V
Quantity per pallet
15 PCS
Item number
PMP482605012
Download datasheet (PDF)
Victron MultiPlus-II 12/4K/160-32 230V – inverter and battery charger in one unitThe Victron MultiPlus-II 12/4K/160-32 230V is a combined inverter and battery charger from Victron Energy — two functions in one unit. It delivers 3.4 kW of pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
3.4 kW output power: Peak power of 6 kW/30s for motor starting and short-term loads.
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the circuit breaker at the site from tripping.
Pure sine wave: The same power quality as the electrical grid — also for sensitive electronics.
Application
Camper vans and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
PowerControl / PowerAssist
Yes
AC input
Input voltage range: 187 - 265VAC
Max. feed-through current
32 A
Max. AC input current
32 A
DC input voltage range
9.5-17 V
AC output
Output voltage: 230VAC ± 2%
Continuous output power at 25 °C
3.4 kW
Continuous output power at 40 °C
3.1 kW
Continuous output power at 65 °C
2.6 kW
Time-limited power 1 (cold start)
4 kW/1h
Time-limited power 2 (cold start)
4.5 kW/2s
Max. feed-in power
3.4 kW
Peak power
6 kW/30s
Max. efficiency
93 %
Zero-load consumption
18 W
Charge voltage absorption
14.4 V
Charge voltage float
13.8 V
Storage mode
13.2 V
Max. battery charge current at 25 °C
160 A
Max. battery charge current at 40 °C
150 A
Battery temperature sensor
Yes
Compatible battery chemistries
Lithium, Lead-acid and more (3)
Auxiliary output
Yes (32 A)
External AC current sensor (optional)
100 A
Programmable relay
Yes
Protection
a - g
VE.Bus communication port
Three-phase and parallel operation, remote monitoring and system integration
General-purpose communication port
Yes, 2x
Operating temperature range
-40 to +65 °C (-40 – 150°F), fan-assisted cooling
Max. humidity
95 % (non-condensing)
Max. altitude
4000 m with 1 %/100 m power derating above 2000 m
Material and color
steel, blue RAL 5012
Enclosure class
IP 21
Battery connections
Two positive M8 bolts and two negative M8 bolts
AC connections
screw terminals 13 mm² (6 AWG)
Weight
22 kg
Dimensions (h × w × d)
576 × 276 × 164 mm
Safety
EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2
Emission / immunity
EN 55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Uninterruptible power supply (UPS)
IEC 62040
Anti-islanding
IEC 62116
Item number
PMP122405010
Download datasheet (PDF)
Victron MultiPlus-II 48/4K5/55-32 GX – inverter and battery charger in one unitThe Victron MultiPlus-II 48/4K5/55-32 GX is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the circuit breaker at the site from tripping.
Automatic switch: Switches automatically between shore power and battery operation without interruption (32 A).
Pure sine wave: Same power quality as the electrical grid — even for sensitive electronics.
Built-in GX device: Full monitoring and remote control via the VRM Portal without extra hardware.
Application
Motorhomes and boats where both shore power and battery operation must be managed automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
PowerControl and PowerAssist
Yes
Automatic switch
32 A
Max. AC input current
32 A
Auxiliary output
Yes (32 A)
Input voltage range
38 – 60 V
Output in inverter mode
Output voltage: 230 VAC ± 2 % Frequency: 50 Hz ± 0.1 %
Cont. output power at 25°C
4 kW
Cont. output power at
3.7 kW
Cont. output power at 65°C
3 kW
Time-limited power 1 (cold start)
4.5 kW/2h
Time-limited power 2 (cold start)
6 kW/25min
Max. fed-back power
4 kW
Peak power
7 kW / 1min
Max. efficiency
95 %
Zero-load consumption
20 W
AC input
Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz
Charge voltage absorption
57.6 V
Charge voltage float
55.2 V
Storage mode
52.8 V
Max. battery charge current
55 A
Battery temperature sensor
Yes
Compatible battery chemistries
Lithium, Lead-acid, Zinc-Bromine and more (3)
Programmable (AUX) relay
Yes
Auxiliary power supply
12V / 100 mA
Programmable open collector output
70 V / 100 mA
Analog-digital aux inputs
Yes, 2x
Temperature sensor
Optional. Order number: ASS000001000
Voltage sense contacts
Yes
Protection
a - g
VE.Bus communication port
for parallel and three-phase operation, remote monitoring and system integration
General purpose communication port
Yes, 2x
Interfaces
VE.Can, USB, Ethernet, VE.Direct, Wi-Fi
External AC current sensor (optional)
100 A
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan-assisted cooling). Maximum Altitude 2000 m
Humidity (non-condensing)
max. 95 %
Material and color
steel, blue RAL 5012
Enclosure class
IP21
Battery connection
M8 bolts
230VAC connection
screw terminals 13 mm² (6 AWG)
Weight
21.4 kg
Dimensions (h × w × d)
590 × 275 × 149 mm
Safety
EN-IEC 62019-1, EN-IEC 6201-2, EN-IEC 60335-1, EN-IEC 60335-2-29
Emission / immunity
EN55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Emergency power supply (UPS)
Certification pending
Anti-islanding
Certification pending
Item number
PMP482406000
Download datasheet (PDF)
Victron MultiPlus-II 48/6K5/100-50 GX – inverter and battery charger in one unitThe Victron MultiPlus-II 48/6K5/100-50 GX is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the site fuse from tripping.
Automatic transfer switch: Switches between shore power and battery operation automatically without interruption (50 A).
Pure sine wave: Same power quality as the electrical grid — also suitable for sensitive electronics.
Built-in GX unit: Full monitoring and remote control via the VRM Portal without extra hardware.
Application
Motorhomes and boats where both shore power and battery operation must be managed automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
PowerControl and PowerAssist
Yes
Automatic transfer switch
50 A
Max. AC input current
50 A
Auxiliary output
Yes (32 A)
Input voltage range
38 – 60 V
Output in inverter mode
output voltage: 230 VAC ± 2 % Frequency: 50 Hz ± 0.1 %
Cont. output power at 25°C
6 kW
Cont. output power at 40°C
5.7 kW
Cont. output power at 65°C
4.6 kW
Time-limited power 1 (cold start)
4.5 kW/2h
Time-limited power 2 (cold start)
8 kW/1h
Max. feed-in power
6 kW
Peak power
11 kW / 1min
Max. efficiency
96 %
Zero-load consumption
28 W
AC input
input voltage range: 187-265 VAC input frequency: 45 – 65 Hz
Absorption charge voltage
57.6 V
Float charge voltage
55.2 V
Storage mode
52.8 V
Max. battery charge current
100 A
Battery temperature sensor
Yes
Compatible battery chemistries
Lithium, Lead-acid, Zinc-Bromine and more (3)
Programmable (AUX) relay
Yes
Auxiliary power supply
12V / 100 mA
Programmable open collector output
70 V / 100 mA
Analog-digital aux inputs
Yes, 2x
Temperature sensor
optional. Order number: ASS000001000
Voltage sense contacts
Yes
Protection
a - g
VE.Bus communication port
for parallel and three-phase operation, remote monitoring and system integration
General purpose communication port
Yes, 2x
Interfaces
VE.Can, USB, Ethernet, VE.Direct, Wi-Fi
External AC current sensor (optional)
100 A
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan-assisted cooling). Maximum Altitude 2000 m
Humidity (non-condensing)
max. 95 %
Material and color
steel, blue RAL 5012
Protection class
IP21
Battery connection
M8 bolts
230VAC connection
screw terminals 13 mm² (6 AWG)
Weight
29.0 kg
Dimensions (h × w × d)
644 × 320 × 150 mm
Safety
EN-IEC 62019-1, EN-IEC 6201-2, EN-IEC 60335-1, EN-IEC 60335-2-29
Emission / immunity
EN55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Emergency power supply (UPS)
Certification pending
Anti-islanding
Certification pending
Item number
PMP482606000
Download datasheet (PDF)
Victron MultiPlus-II 48V/10000W/140-100 – inverter and battery charger in one unitThe Victron MultiPlus-II 48V/10000W/140-100 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It delivers 10000 VA pure sine 230V and automatically switches between shore power and battery operation.Advantages
10000 VA output power: Peak power of 18000 W for motor starting and short-term loads.
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power, preventing the site's fuse from tripping.
Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics.
Application
Motorhomes and boats, where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
PowerControl / PowerAssist
Yes
AC input
Input voltage range: 187 - 265VAC, / input frequency: 45 - 65 Hz
Max. feed-through current
100 A
Input voltage range
38 - 66 V
Output
Output voltage: 230VAC ± 2 % / frequency: 50 Hz ± 0.1 %
Continuous output power at 25 °C
10000 VA
Continuous output power at 40 °C
7000 W
Continuous output power at 65 °C
6000 W
Max. feed-in power
10000 VA
Peak power
18000 W
Max. efficiency
95 %
Zero-load consumption
38 W
Charge voltage absorption
57.6 V
Charge voltage float
55.2 V
Storage mode
52.8 V
Charge current house battery
140 A
Auxiliary output
Yes (50 A)
External AC current sensor (optional)
100 A
Programmable relay
Yes
Protection
a - g
VE.Bus communication port
Three-phase and parallel (6) operation, remote monitoring and system integration
General purpose com. port
Yes, 2x
Common characteristics
Operating temp.: -40 to +65 °C (-40 – 150°F) / (fan-assisted cooling) / Humidity (non-condensing): max. 95 % / Maximum altitude: 2000 m
Material and color
steel, blue RAL 5012 / Pollution degree 2, OVC3
Pollution degree
OVC3
Protection class
IP 22
Battery connections
Four M8 bolts (2 positive and 2 negative connections)
AC connections
Bolts M6
Weight
48.8 kg
Dimensions (h × w × d)
677 × 363 × 206 mm
Safety
EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2
Emission / immunity
EN 55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Uninterruptible power supply (UPS)
Please consult certificates on our website.
Anti-islanding
Please consult certificates on our website.
Nominal voltage
48 V
Part number
PMP483105000
Download datasheet (PDF)
Victron MultiPlus inverter/charger 48V/5000W/70A – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 48V/5000W/70A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power, preventing the site's fuse from blowing.
Pure sine wave: Power quality identical to the grid — even for sensitive electronics.
Application
Motorhomes and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
Nominal voltage
48 V
Weight
35 kg
Dimensions (h × w × d)
240 × 328 × 444 mm
Item number
PMP485021010
Download datasheet (PDF)
Victron MultiPlus inverter/charger 48V/500W/6A – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 48V/500W/6A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power, preventing the site's fuse from blowing.
Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics.
Application
Camper vans and boats where both shore power and battery operation need to be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
Nominal voltage
48 V
Weight
4.4 kg
Dimensions (h × w × d)
100 × 181 × 311 mm
Item number
PMP481500000
Download datasheet (PDF)
Victron MultiPlus inverter/charger 48V/800W/9A – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 48V/800W/9A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the site fuse from blowing.
Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics.
Application
Motorhome and boat, where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar cells and generator.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
Rated voltage
48 V
Weight
7.5 kg
Dimensions (h × w × d)
100 × 240 × 360 mm
Item number
PMP481800000
Download datasheet (PDF)
Victron MultiPlus inverter/charger 48V/1600W/13A – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 48V/1600W/13A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the site fuse from blowing.
Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics.
Application
Motorhomes and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
Nominal voltage
48 V
Weight
11.5 kg
Dimensions (h × w × d)
120 × 270 × 465 mm
Part number
PMP482160000
Download datasheet (PDF)
Victron MultiPlus 48V/3000W/35A-50 – inverter and battery charger in one unitThe Victron MultiPlus 48V/3000W/35A-50 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies your installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the fuse at the campsite or marina from blowing.
Pure sine wave: The same power quality as the mains grid — also for sensitive electronics.
Applications
Motorhomes and boats where both shore power and battery operation need to be handled automatically.
Off-grid and hybrid systems with solar panels and a generator.
Backup power systems and energy storage in homes and businesses.
Specifications
Specification
Details
Nominal voltage
48 V
Weight
20 kg
Dimensions (h × w × d)
218 × 258 × 362 mm
Item number
PMP483021010
Download datasheet (PDF)
Victron MultiPlus 48V/3000W/35A-16 – inverter and battery charger in one unitThe Victron MultiPlus 48V/3000W/35A-16 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies your installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the fuse at the campsite or marina from blowing.
Pure sine wave: The same power quality as the mains grid — also for sensitive electronics.
Applications
Motorhomes and boats where both shore power and battery operation need to be handled automatically.
Off-grid and hybrid systems with solar panels and a generator.
Backup power systems and energy storage in homes and businesses.
Specifications
Specification
Details
Nominal voltage
48 V
Weight
20 kg
Dimensions (h × w × d)
218 × 258 × 362 mm
Item number
PMP483020001
Download datasheet (PDF)
Victron MultiPlus inverter/charger 48V/1200W/13A – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 48V/1200W/13A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power, preventing the site's fuse from blowing.
Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics.
Application
Motorhomes and boats, where both shore power and battery operation must be managed automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
Nominal voltage
48 V
Weight
9.9 kg
Dimensions (h × w × d)
100 × 250 × 406 mm
Item number
PMP482120000
Download datasheet (PDF)
Victron MultiPlus inverter/charger 24V/500W – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 24V/500W is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the site fuse from blowing.
Pure sine wave: The same power quality as the mains — also for sensitive electronics.
Application
Camper van and boat where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generator.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
Nominal voltage
24 V
Weight
6 kg
Dimensions (h × w × d)
100 × 182 × 311 mm
Item number
PMP241500000
Download datasheet (PDF)
Victron MultiPlus inverter/charger 24V/800W/16A – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 24V/800W/16A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the site fuse from blowing.
Pure sine wave: Same power quality as the electrical grid — also for sensitive electronics.
Application
Camper vans and boats, where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar cells and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
Nominal voltage
24 V
Weight
7.5 kg
Dimensions (h × w × d)
100 × 240 × 360 mm
Item number
PMP241800000
Download datasheet (PDF)
Victron MultiPlus 24V/5000W/120A-100 – inverter and battery charger in one unitThe Victron MultiPlus 24V/5000W/120A-100 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies your installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the fuse at the campsite or marina from blowing.
Pure sine wave: The same power quality as the mains grid — also for sensitive electronics.
Applications
Motorhomes and boats where both shore power and battery operation need to be handled automatically.
Off-grid and hybrid systems with solar panels and a generator.
Backup power systems and energy storage in homes and businesses.
Specifications
Specification
Details
Nominal voltage
24 V
Weight
35 kg
Dimensions (h × w × d)
240 × 328 × 444 mm
Item number
PMP245021010
Download datasheet (PDF)
Victron MultiPlus-II 24V/5000W/120A-50 – inverter and battery charger in one unitThe Victron MultiPlus-II 24V/5000W/120A-50 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies your installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the fuse at the campsite or marina from blowing.
Pure sine wave: The same power quality as the mains grid — also for sensitive electronics.
Applications
Motorhomes and boats where both shore power and battery operation need to be handled automatically.
Off-grid and hybrid systems with solar panels and a generator.
Backup power systems and energy storage in homes and businesses.
Specifications
Specification
Details
Nominal voltage
24 V
Weight
30 kg
Dimensions (h × w × d)
149 × 330 × 607 mm
Item number
PMP242505010
Download datasheet (PDF)
Victron MultiPlus-II 24V/3000W/70A-32 – inverter and battery charger in one unitThe Victron MultiPlus-II 24V/3000W/70A-32 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies your installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the fuse at the campsite or marina from blowing.
Pure sine wave: The same power quality as the mains grid — also for sensitive electronics.
Applications
Motorhomes and boats where both shore power and battery operation need to be handled automatically.
Off-grid and hybrid systems with solar panels and a generator.
Backup power systems and energy storage in homes and businesses.
Specifications
Specification
Details
Nominal voltage
24 V
Weight
21 kg
Dimensions (h × w × d)
141 × 268 × 499 mm
Item number
PMP242305010
Download datasheet (PDF)
Victron MultiPlus 24V/3000W/70A-16 – inverter and battery charger in one unitThe Victron MultiPlus 24V/3000W/70A-16 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies your installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the fuse at the campsite or marina from blowing.
Pure sine wave: The same power quality as the mains grid — also for sensitive electronics.
Applications
Motorhomes and boats where both shore power and battery operation need to be handled automatically.
Off-grid and hybrid systems with solar panels and a generator.
Backup power systems and energy storage in homes and businesses.
Specifications
Specification
Details
Nominal voltage
24 V
Weight
18 kg
Dimensions (h × w × d)
218 × 258 × 362 mm
Item number
PMP242300001
Download datasheet (PDF)
Victron MultiPlus inverter/charger 12V/800W/35A – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 12V/800W/35A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the site fuse from tripping.
Pure sine wave: Same power quality as the mains — even for sensitive electronics.
Application
Camper vans and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
Nominal voltage
12 V
Weight
7.5 kg
Dimensions (h × w × d)
100 × 240 × 360 mm
Item number
PMP121800000
Download datasheet (PDF)
Victron MultiPlus inverter/charger 24V/1600W/40A – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 24V/1600W/40A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the site's fuse from blowing.
Pure sine wave: Same power quality as the mains grid — also for sensitive electronics.
Application
Motorhomes and boats where both shore power and battery operation need to be managed automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
Nominal voltage
24 V
Weight
11.5 kg
Dimensions (h × w × d)
110 × 214 × 375 mm
Item number
PMP242160000
Download datasheet (PDF)
Victron MultiPlus inverter/charger 12V/1200W/50A – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 12V/1200W/50A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power, preventing the site fuse from tripping.
Pure sine wave: Power quality identical to the grid — even for sensitive electronics.
Application
Motorhomes and boats where both shore power and battery operation must be managed automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
Nominal voltage
12 V
Weight
9.8 kg
Dimensions (h × w × d)
100 × 250 × 406 mm
Item number
PMP122120000
Download datasheet (PDF)
Victron MultiPlus inverter/charger 24V/1200W/25A – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 24V/1200W/25A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V, and switches automatically between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the site fuse from blowing.
Pure sine wave: The same power quality as the electrical grid — also for sensitive electronics.
Application
Motorhome and boat, where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generator.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
Nominal voltage
24 V
Weight
9.7 kg
Dimensions (h × w × d)
100 × 250 × 406 mm
Item number
PMP242120000
Download datasheet (PDF)
Victron MultiPlus inverter/charger 12V/1600W/70A – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 12V/1600W/70A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the site fuse from blowing.
Pure sine wave: The same power quality as the mains grid — even for sensitive electronics.
Application
Motorhomes and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
Rated voltage
12 V
Weight
11.5 kg
Dimensions (h × w × d)
29 × 510 × 190 mm
Item number
PMP122160000
Download datasheet (PDF)
Victron MultiPlus inverter/charger 12V/500/20A – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 12V/500/20A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the site fuse from tripping.
Pure sine wave: The same power quality as the electrical grid — also for sensitive electronics.
Application
Camper vans and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
Rated voltage
12 V
Weight
6 kg
Dimensions (h × w × d)
100 × 182 × 311 mm
Item number
PMP121500000
Download datasheet (PDF)
Victron MultiPlus C inverter/charger 12V/2000W/80 – inverter and battery charger in one unitThe Victron MultiPlus C inverter/charger 12V/2000W/80 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the site fuse from tripping.
Automatic transfer switch: Automatically switches between shore power and battery operation without interruption (32 A).
Pure sine wave: Same power quality as the electrical grid — even for sensitive electronics.
Applications
Camper vans and boats where both shore power and battery operation need to be managed automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
PowerControl / PowerAssist
Yes
Automatic transfer switch
32 A
Input voltage range
9.5 - 17Vdc
Output voltage
230Vac ± 2 %
Output frequency
50 Hz ± 0.1 %
Cont. output power at 25°C (77°F)
2000 VA
Cont. output power at 40°C (104°F)
1400 W
Cont. output power at 65°C (149°F)
1000 W
Peak power
3500 W
Max. efficiency
93 %
Zero-load consumption
10 W
AC input
187 - 265Vac
Charge voltage absorption
14.4 V
Charge voltage float
13.8 V
Storage mode
13.2 V
Charge current house battery
80 A
Charge current starter battery
1 A
Battery temperature sensor
Yes
Programmable relay
Yes
Protection
a – g
Operating temperature
-40 to +65 °C (-40 to +140°F), fan-cooled
Humidity
Maximum 95 %, non-condensing
Max. altitude above sea level
2000 m
Material and color
steel/ABS, blue RAL 5012
Protection class
IP 21
Battery connection
M8 bolts
230V AC connection
screw terminals 13 mm² (6 AWG)
Weight
15.5 kg (34.2lb)
Dimensions (h × w × d)
506 × 236 × 147 mm (19.92 × 9.29 × 5.79 inch)
Safety
EN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1
Emission / immunity
EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Road vehicles
ECE R10-4
Nominal voltage
12 V
Item number
CMP122200000
Download datasheet (PDF)
Victron MultiPlus C inverter/charger 12V/800W/35A – inverter and battery charger in one unitThe Victron MultiPlus C inverter/charger 12V/800W/35A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the site fuse from blowing.
Pure sine wave: The same power quality as the electrical grid — also for sensitive electronics.
Application
Motorhomes and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
Nominal voltage
12 V
Weight
10 kg
Dimensions (h × w × d)
110 × 214 × 345 mm
Item number
CMP121800000
Download datasheet (PDF)
Victron MultiPlus C inverter/charger 24V/2000W/50 – inverter and battery charger in one unitThe Victron MultiPlus C inverter/charger 24V/2000W/50 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the shore power fuse from blowing.
Automatic transfer switch: Switches automatically between shore power and battery operation without interruption (32 A).
Pure sine wave: Same power quality as the electrical grid — also suitable for sensitive electronics.
Application
Camper vans and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
PowerControl / PowerAssist
Yes
Automatic transfer switch
32 A
Input voltage range
19 - 33Vdc
Output voltage
230Vac ± 2 %
Output frequency
50 Hz ± 0.1 %
Cont. output power at 25°C (77°F)
2000 VA
Cont. output power at 40°C (104°F)
1400 W
Cont. output power at 65°C (149°F)
1000 W
Peak power
3500 W
Max. efficiency
94 %
Zero-load consumption
11 W
AC input
187 - 265Vac
Charge voltage absorption
28.8 V
Charge voltage float
27.6 V
Storage mode
26.4 V
Charge current house battery
50 A
Charge current starter battery
1 A
Battery temperature sensor
Yes
Programmable relay
Yes
Protection
a – g
Operating temperature
-40 to +65 °C (-40 to + 140°F), fan-cooled
Humidity
Maximum 95 %, non-condensing
Max. altitude above sea level
2000 m
Material and color
steel/ABS, blue RAL 5012
Protection class
IP 21
Battery connection
M8 bolts
230V AC connection
screw terminals 13 mm² (6 AWG)
Weight
15.5 kg (34.2 lb)
Dimensions (h × w × d)
506 × 236 × 147 mm (19.92 × 9.29 × 5.79 inch)
Safety
EN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1
Emission / immunity
EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Road vehicles
ECE R10-4
Nominal voltage
24 V
Item number
CMP242200000
Download datasheet (PDF)
Victron MultiPlus C inverter/charger 12V/1600W/70 – inverter and battery charger in one unitThe Victron MultiPlus C inverter/charger 12V/1600W/70 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the site fuse from blowing.
Pure sine wave: The same power quality as the grid — also for sensitive electronics.
Application
Motorhome and boat, where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generator.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
Nominal voltage
12 V
Weight
10 kg
Dimensions (h × w × d)
110 × 214 × 375 mm
Item number
CMP122160000
Download datasheet (PDF)
Victron MultiPlus C inverter/charger 12V/1200W/50 – inverter and battery charger in one unitThe Victron MultiPlus C inverter/charger 12V/1200W/50 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the shore-side fuse from blowing.
Pure sine wave: The same power quality as the grid — also for sensitive electronics.
Application
Motorhomes and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
Nominal voltage
12 V
Weight
10 kg
Dimensions (h × w × d)
110 × 214 × 375 mm
Item number
CMP122120000
Download datasheet (PDF)
Victron MultiPlus-II 48V/5000W/70A-50 – inverter and battery charger in one unitThe Victron MultiPlus-II 48V/5000W/70A-50 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies your installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the fuse at the campsite or marina from blowing.
Pure sine wave: The same power quality as the mains grid — also for sensitive electronics.
Applications
Motorhomes and boats where both shore power and battery operation need to be handled automatically.
Off-grid and hybrid systems with solar panels and a generator.
Backup power systems and energy storage in homes and businesses.
Specifications
Specification
Details
Nominal voltage
48 V
Weight
30 kg
Dimensions (h × w × d)
149 × 320 × 565 mm
Item number
PMP482505012
Download datasheet (PDF)
Victron MultiPlus C 24/1600/40-16 – inverter and battery charger in one unitThe Victron MultiPlus C 24/1600/40-16 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the campsite fuse from blowing.
Pure sine wave: The same power quality as the electrical grid — also for sensitive electronics.
Application
Camper vans and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
Weight
10 kg
Dimensions (h × w × d)
375 × 214 × 110 mm
Item number
CMP242160000
Download datasheet (PDF)
Victron MultiPlus 48V/20K/250-100 – inverter and battery charger in one unitThe Victron MultiPlus 48V/20K/250-100 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power, preventing the site fuse from blowing.
Pure sine wave: Same power quality as the electrical grid — even for sensitive electronics.
Application
Motorhomes and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
Nominal voltage
48 V
Weight
70 kg
Dimensions (h × w × d)
572 × 344 × 488 mm
Item number
PMC483200400
Download datasheet (PDF)
Victron MultiPlus inverter/charger 24V/2000W/50-32 – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 24V/2000W/50-32 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the circuit breaker at the site from tripping.
Automatic transfer switch: Switches automatically between shore power and battery operation without interruption (32 A).
Pure sine wave: Same power quality as the grid — even for sensitive electronics.
Application
Camper vans and boats where both shore power and battery operation must be managed automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
PowerControl / PowerAssist
Yes
Automatic transfer switch
32 A
Input voltage range
19 - 33Vdc
Output voltage
230Vac ± 2 %
Output frequency
50 Hz ± 0.1 %
Cont. output power at 25°C (77°F)
2000 VA
Cont. output power at 40°C (104°F)
1400 W
Cont. output power at 65°C (149°F)
1000 W
Peak power
3500 W
Max. efficiency
94 %
Zero-load consumption
11 W
AC input
187 - 265Vac
Charging voltage absorption
28.8 V
Charging voltage float
27.6 V
Storage mode
26.4 V
Charging current house battery
50 A
Charging current starter battery
1 A
Battery temperature sensor
Yes
Programmable relay
Yes
Protection
a – g
Operating temperature
-40 to +65 °C (-40 to +140°F), fan cooled
Humidity
Maximum 95 %, non-condensing
Max. altitude
2000 m
Material and color
steel/ABS, blue RAL 5012
Protection class
IP 21
Battery connection
M8 bolts
230V AC connection
screw terminals 13 mm² (6 AWG)
Weight
15.5 kg (34.2lb)
Dimensions (h × w × d)
506 × 236 × 147 mm (19.92 × 9.29 × 5.79 inch)
Safety
EN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1
Emission / immunity
EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Road vehicles
ECE R10-4
Nominal voltage
24 V
Item number
PMP242200000
Download datasheet (PDF)
Victron MultiPlus inverter/charger 24V/3000W/70A GX – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 24V/3000W/70A GX is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the fuse at the site from blowing.
Pure sine wave: Same power quality as the electrical grid — even for sensitive electronics.
Built-in GX device: Full monitoring and remote control via the VRM Portal without extra hardware.
Application
Motorhome and boat, where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generator.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
Nominal voltage
24 V
Weight
19 kg
Dimensions (h × w × d)
141 × 268 × 499 mm
Item number
PMP242306000
Download datasheet (PDF)
Victron MultiPlus inverter/charger 48V/2000/25-32A – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 48V/2000/25-32A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the site fuse from tripping.
Pure sine wave: The same power quality as the grid — also for sensitive electronics.
Applications
Motorhomes and boats where both shore power and battery operation need to be managed automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
Nominal voltage
48 V
Weight
15 kg
Dimensions (h × w × d)
146 × 234 × 506 mm
Part number
PMP482200000
Download datasheet (PDF)
Victron Multi RS 19 Solar 48/6000/100-450/100 – inverter and battery charger in one unitThe Victron Multi RS 19 Solar 48/6000/100-450/100 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It delivers 4600 W at 46 VDC to 5200 W at 52 VDC of pure sine wave 230V, and automatically switches between shore power and battery operation.Advantages
Output power: Peak power of 9 kW for 3 seconds / 7 kW for 4 minutes for motor starts and short-term loads.
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and avoids tripping the site's circuit breaker.
Automatic switch: Switches automatically between shore power and battery operation without interruption (50 A).
Pure sine wave: Same power quality as the electrical grid — even for sensitive electronics.
Application
Camper vans and boats, where both shore power and battery operation must be managed automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
PowerControl and PowerAssist
Yes
Automatic switch
50 A
Max. AC input and pass-through current
50 A
DC input voltage range
38 – 62 V
AC output
output voltage: 230 Vac ± 2 % / Frequency: 50 Hz ± 0.1 % (1) / Maximum continuous inverter current : 25 Aac
Continuous output power at 25 °C
Increases linearly from 4600 W at 46 VDC to 5200 W at 52 VDC
Continuous output power at 40 °C
4500 W
Continuous output power at 65 °C
3000 W
Peak power
9 kW for 3 seconds / 7 kW for 4 minutes
Short-circuit current on output
45 A
Max. AC output overcurrent protection
30 A
Max. efficiency
96.5 % at 1 kW consumption / 94 % at 5 kW consumption
Zero-load consumption
20 W
Low battery voltage disconnect
37.2 V (adjustable)
Low battery restart
43.6 V (adjustable)
Max. DC voltage
450 V
Start-up voltage
120 V
MPPT voltage range
65 – 450 V
Max. operational PV input current limit
12 A
Max. PV short-circuit current
16 A
Max. DC solar charging power
6000 W total - 3000 W per tracker
Earth leakage trip level
30 mA
Isolation fail level (detection before start-up)
100 kΩ
AC input
input voltage range: 187-265 VAC / input frequency: 45-65 Hz / Nominal voltage 230 Vac / Nominal frequency: 50 Hz / AC inrush current: NA
Icw and Ipk requirements
Icw: 500 A @ 0.1s and Ipk: 2kA
Programmable charger voltage range
36 - 60 V
Absorption charge voltage
default: 57.6 V (adjustable)
Float charge voltage
default: 55.2 V (adjustable)
Max. charge current from AC
88 A @ 57.6 V
Total max. combined charger current (AC + PV)
100 A
Battery temperature sensor
included
Battery voltage measurement
Yes
Parallel and 3-phase operation
3 Phase supports 1 unit per phase. Parallel is not supported.
Auxiliary output
Yes
Programmable relay
Yes
Protection
a - g
Data Communications
VE.Direct port, VE.Can port & Bluetooth
Bluetooth frequency
2402 - 248 0 MHz
Bluetooth power
4 dBm
General purpose analog/digital in port
Yes, 2x
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Max. altitude above sea level
2000 m
Humidity (non-condensing)
max. 95 %
Earthing system
TN, TT only
Material
steel, blue RAL 5012
Enclosure class
IP21 / Protective Class: I
Battery connection
M8 Bolts
PV connection
2 strings, each with positive and negative MC4
230 V AC connection
screw terminals 10 mm² (6 AWG)
Weight
12.3 kg
Dimensions (h × w × d)
462 × 425 × 127 mm
Safety
EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2 / IEC 62040, IEC 62477
Emission / immunity
EN 55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 / Pollution Degree
Overvoltage category
battery: OVC I / PV port: OVC II / AC in / AC out: OVC III
UPS Specification
input: 230VAC, 46 A, 50 Hz / output: 230VAC, 26 A, 50 Hz, 6 kVA / 5 kW / Protective device (input and output): max. 50 A circuit breaker
Nominal voltage
48 V
EAN
8719076058403
Part number
PMR482602030
Download datasheet (PDF)
Victron MultiPlus inverter/charger 48V 4500W/55-32 – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 48V 4500W/55-32 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the site fuse from blowing.
Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics.
Application
Camper van and boat, where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generator.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
Nominal voltage
48 V
Weight
21.4 kg
Dimensions (h × w × d)
149 × 275 × 590 mm
Item number
PMP482405012
Download datasheet (PDF)
Victron MultiPlus 12V/3000W/120A-16 – inverter and battery charger in one unitThe Victron MultiPlus 12V/3000W/120A-16 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies your installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the fuse at the campsite or marina from blowing.
Pure sine wave: The same power quality as the mains grid — also for sensitive electronics.
Applications
Motorhomes and boats where both shore power and battery operation need to be handled automatically.
Off-grid and hybrid systems with solar panels and a generator.
Backup power systems and energy storage in homes and businesses.
Specifications
Specification
Details
Nominal voltage
12 V
Weight
20.9 kg
Item number
PMP122300001
Download datasheet (PDF)
Victron Multi RS Solar 48/6000/100-450/100 – inverter and battery charger in one unitThe Victron Multi RS Solar 48/6000/100-450/100 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It delivers Increases linearly from 4600 W at 4 6 VDC to 5200 W at 52 VDC of pure sine wave 230V, and switches automatically between shore power and battery operation.Advantages
Increases linearly from 4600 W at 46 VDC to 5200 W at 52 VDC output power: Peak power of 9 kW for 3 seconds / 7 kW for 4 minutes for motor starting and short-term loads.
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power, preventing the site's fuse from blowing.
Automatic transfer switch: Switches automatically between shore power and battery operation without interruption (50 A).
Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics.
Application
Campervans and boats, where both shore power and battery operation must be managed automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
PowerControl and PowerAssist
Yes
Automatic transfer switch
50 A
Max. AC input and pass-through current
50 A
DC input voltage range
38 – 62 V
AC output
output voltage: 230 Vac ± 2 % / Frequency: 50 Hz ± 0.1 % (1) / Maximum continuous inverter current: 25 Aac
Continuous output power at 25 °C
Increases linearly from 4600 W at 46 VDC to 5200 W at 52 VDC
Continuous output power at 40 °C
4500 W
Continuous output power at 65 °C
3000 W
Peak power
9 kW for 3 seconds / 7 kW for 4 minutes
Short-circuit current on output
45 A
Max. AC output overcurrent protection
30 A
Max. efficiency
96.5 % at 1 kW consumption / 94 % at 5 kW consumption
Zero-load consumption
20 W
Low battery voltage disconnect
37.2 V (adjustable)
Low battery restart
43.6 V (adjustable)
Max. DC voltage
450 V
Start-up voltage
120 V
MPPT voltage range
65 – 450 V
Max. operational PV input current limit
12 A
Max. PV short-circuit current
16 A
Max. DC solar charging power
6000 W total - 3000 W per tracker
Earth leakage trip level
30 mA
Isolation fail level (detection before start-up)
100 kΩ
AC input
input voltage range: 187-265 VAC / input frequency: 45-65 Hz / Nominal voltage 230 Vac / Nominal frequency: 50 Hz / AC inrush current: NA
Icw and Ipk requirements
Icw: 500 A @ 0.1s and Ipk: 2kA
Programmable charger voltage range
36 - 60 V
Absorption charge voltage
default: 57.6 V (adjustable)
Float charge voltage
default: 55.2 V (adjustable)
Max. charge current from AC
88 A @ 57.6 V
Total max. combined charger current (AC + PV)
100 A
Battery temperature sensor
included
Battery voltage sensing
Yes
Parallel and 3-phase operation
3 Phase supports 1 unit per phase. Parallel is not supported.
Auxiliary output
Yes
Programmable relay
Yes
Protection
a - g
Data Communications
VE.Direct port, VE.Can port & Bluetooth
Bluetooth frequency
2402 - 2480 MHz
Bluetooth power
4 dBm
General purpose analog/digital in port
Yes, 2x
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Max. altitude
2000 m
Humidity (non-condensing)
max. 95 %
Earthing system
TN, TT only
Material
steel, blue RAL 5012
Enclosure class
IP21 / Protective Class: I
Battery connection
M8 Bolts
PV connection
2 strings, each with positive and negative MC4
230 V AC connection
screw terminals 10 mm² (6 AWG)
Weight
12.3 kg
Dimensions (h × w × d)
462 × 425 × 127 mm
Safety
EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2 / IEC 62040, IEC 62477
Emission / immunity
EN 55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 / Pollution Degree
Overvoltage category
battery: OVC I / PV port: OVC II / AC in / AC out: OVC III
UPS Specification
input: 230VAC, 46 A, 50 Hz / output: 230VAC, 26 A, 50 Hz, 6 kVA / 5 kW / Protective device (input and output): max. 50 A circuit breaker
Nominal voltage
48 V
Item number
PMR482602020
Download datasheet (PDF)
Victron MultiPlus 12V/2000W/80A-32 – inverter and battery charger in one unitThe Victron MultiPlus 12V/2000W/80A-32 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies your installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the fuse at the campsite or marina from blowing.
Pure sine wave: The same power quality as the mains grid — also for sensitive electronics.
Applications
Motorhomes and boats where both shore power and battery operation need to be handled automatically.
Off-grid and hybrid systems with solar panels and a generator.
Backup power systems and energy storage in homes and businesses.
Specifications
Specification
Details
Nominal voltage
12 V
Weight
16 kg
Dimensions (h × w × d)
147 × 236 × 506 mm
Item number
PMP122200000
Download datasheet (PDF)
Victron MultiPlus 12V/3000W/120A-50 – inverter and battery charger in one unitThe Victron MultiPlus 12V/3000W/120A-50 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies your installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the fuse at the campsite or marina from blowing.
Pure sine wave: The same power quality as the mains grid — also for sensitive electronics.
Applications
Motorhomes and boats where both shore power and battery operation need to be handled automatically.
Off-grid and hybrid systems with solar panels and a generator.
Backup power systems and energy storage in homes and businesses.
Specifications
Specification
Details
Nominal voltage
12 V
Weight
21.7 kg
Dimensions (h × w × d)
218 × 258 × 362 mm
Item number
PMP123021010
Download datasheet (PDF)
Victron Multi HS 19 Solar 15 kW – inverter and battery charger in one unitThe Victron Multi HS 19 Solar 15 kW is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the site fuse from blowing.
Pure sine wave: The same power quality as the grid — also for sensitive electronics.
Application
Motorhomes and boats where both shore power and battery operation must be managed automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
Weight
26 kg
EAN
8719076058410
Dimensions (h × w × d)
310 × 590 × 760 mm
Item number
PMR803150300
Download datasheet (PDF)
Victron inverter/chargers combine an inverter, battery charger, and automatic transfer switch in one unit. The system switches automatically between shore power and battery, ensuring you have 230V wherever you are. Choose based on battery voltage, power in VA, and charging current.
