Battery monitoring & shunts

Victron Enclosure for BMV 700 – battery monitoring with precise consumption measurementThe Victron Enclosure for BMV 700 is a battery monitor from Victron Energy that measures the actual current into and out of the battery bank. You get the state of charge in percent, consumption, and expected time remaining — far more accurate than a simple voltage meter.Advantages Precise state of charge in percent: Measures the actual current into and out of the battery — not just the voltage. Time remaining and consumption: Shows how much power is left at the current consumption level. VE.Direct port: Can be connected to a GX device so that battery data is included on the VRM Portal. History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting. Application Precise display of the battery's state of charge in campers and boats. Monitoring of consumption and residual capacity in solar power systems. Troubleshooting and documentation of battery health over time. Specifications Specification Details Supply voltage range 6.5 - 95 Vdc Current draw (backlight off) < 4 mA Battery capacity (Ah) 1 - 9999 Ah Operating temperature range -40 +50 °C (-40 - 120°F) VE.Direct port Yes Relay 60 V / 1 A normally open (function can be inverted) Current ± 0.01 A Voltage ± 0.01 V Amp hours ± 0.1 Ah State of charge (0 - 100%) ± 0.1 % Time-to-go ± 1 min. Accuracy current measurement ± 0.4 % Accuracy voltage measurement ± 0.3 % Installation Flush mount Head unit front diameter 63 mm (2.5 inch) Head unit front bezel 69 × 69 mm (2.7 × 2.7 inch) Head unit body diameter and depth 52 mm (2.0 inch) and 31 mm (1.2 inch) Shunt connection bolts M10 (0.3937 inch) Head unit protection category IP55 (not intended for outdoor use) Safety EN 60335-1 Emission / immunity EN 55014-1 / EN 55014-2 Automotive directive ECE R10-4 / EN 50498 Shunt (included) 500 A / 50 mV Cables (included) 10 meter 6 core UTP with RJ12 connectors. / 1 cable with 1 A slow blow fuse for battery positive connection. Temperature sensor optional (ASS000100000) Weight 0.57 kg Dimensions (h × w × d) 45 × 85 × 130 mm Item number ASS050500000 Download datasheet (PDF)

Read more less

Victron Temperature Sensor for BMV – original Victron accessoryThe Victron Temperature Sensor for BMV is an original accessory from Victron Energy. It integrates directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages Original Victron accessory: Fits directly into the Victron system without any modifications. Reliable quality: Materials and workmanship that endure in marine and vehicle environments. Application Original accessory that fits directly into the Victron system. Motorhomes, boats, summer houses, and off-grid systems. Safe and stable installation. Specifications Specification Details Weight 0.075 kg Part number ASS000100000 Download datasheet (PDF)

Read more less

Victron SmartShunt 300A/50 mV IP65 – waterproof battery monitor with BluetoothThe Victron SmartShunt 300A/50 mV IP65 is a complete battery monitor without a display – your phone is the screen. It measures voltage and current and calculates the state of charge (SoC), consumed amp hours and remaining runtime, which you can follow via Bluetooth in the VictronConnect app. The IP65 version is waterproof, and via VE.Direct it can be connected to a GX device such as the Cerbo GX.Benefits Waterproof IP65: Can be mounted in damp environments, e.g. in boats and vehicles. Built-in Bluetooth: View the battery's status, history and trends in the VictronConnect app. Precise measurement: Current measurement with ± 0.4 % accuracy and a resolution of 0.01 A. Auxiliary input: Measure the voltage of a starter battery, the midpoint of a battery bank or the temperature (with an optional sensor). GX integration: VE.Direct connection to a GX device, so the data can also be viewed in the VRM portal. Applications Monitoring the leisure battery in motorhomes, caravans and boats. Solar and off-grid systems where you want to know the real state of charge. Systems with currents up to 300 A where there is no room for a fixed display. Specifications Specification Details Shunt 300 A / 50 mV Supply voltage 6.5–70 V DC Own consumption < 1 mA Auxiliary input, voltage range 6.5–70 V DC Auxiliary input, function Voltage of 2nd battery (starter battery), midpoint or temperature Battery capacity 1–9999 Ah Operating temperature -40 to +50 °C Temperature measuring range -20 to +50 °C (with optional temperature sensor) Resolution Current ± 0.01 A / voltage ± 0.01 V / ± 0.1 Ah / SoC ± 0.1 % / remaining runtime ± 1 min. Current measurement accuracy ± 0,4 % Offset < 10 mA Voltage measurement accuracy ± 0,3 % Communication Bluetooth (VictronConnect) and VE.Direct Alarms Shown in VictronConnect or on a GX device (no buzzer or relay) Included cables 2 × 1.5 m cable with 1 A fuse (+ and starter battery/midpoint) plus 1.5 m cable with VE.Direct connector Temperature sensor Optional (ASS000100000) Connection bolts M8 Enclosure rating IP65 Dimensions (h × w × d) 44 × 120 × 38 mm Safety EN 60335-1 Emission / immunity EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3 Automotive EN 50498 Item number SHU065130050 Download datasheet (PDF)

Read more less

Victron Shunt 6000A/50 mV – battery monitoring with precise consumption measurementThe Victron Shunt 6000A/50 mV is a battery monitor from Victron Energy that measures the actual current flowing in and out of the battery bank. You get state-of-charge in percentage, consumption, and expected remaining time — far more accurate than a simple voltage meter.Advantages Precise state-of-charge in percentage: Measures the actual current flowing in and out of the battery — not just the voltage. Remaining time and consumption: Shows how much power is left at the current consumption rate. History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting. Application Precise display of battery state-of-charge in motorhomes and boats. Monitoring of consumption and remaining capacity in solar power systems. Troubleshooting and documentation of battery status over time. Specifications Specification Details Weight 5.1 kg Dimensions (h × w × d) 168 × 60 × 135 mm Part number SHU602050200

Read more less

Victron Shunt 2000A/50 mV – battery monitoring with precise consumption measurementThe Victron Shunt 2000A/50 mV is a battery monitor from Victron Energy that measures the actual current flowing in and out of the battery bank. You get the state of charge in percent, consumption, and expected time remaining — far more accurate than a simple voltage meter.Advantages Precise state of charge in percent: Measures the actual current into and out of the battery — not just the voltage. Time remaining and consumption: Shows how much power is left at the current rate of consumption. History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting. Application Precise display of the battery's state of charge in motorhomes and boats. Monitoring of consumption and remaining capacity in solar power systems. Troubleshooting and documentation of the battery's condition over time. Specifications Specification Details Weight 2.25 kg Dimensions (h × w × d) 168 × 50 × 80 mm Part number SHU202050200

Read more less

Victron Battery Monitor BMV-710H Smart – battery monitoring with precise consumption measurementThe Victron Battery Monitor BMV-710H Smart is a battery monitor from Victron Energy that measures the actual current flowing in and out of the battery bank. You get the state of charge in percent, consumption, and expected time remaining — far more accurate than a simple voltage meter, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages Precise state of charge in percent: Measures the actual current into and out of the battery — not just the voltage. Time remaining and consumption: Shows how much power is left at the current consumption rate. Bluetooth built-in: All data directly on your phone in the VictronConnect app. VE.Direct port: Can be connected to a GX device so that battery data is included on the VRM Portal. History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting. Application Precise display of battery state of charge in motorhomes and boats. Monitoring of consumption and remaining capacity in solar power systems. Troubleshooting and documentation of battery condition over time. Specifications Specification Details Supply voltage range 60 - 385Vdc Current draw (backlight off) < 1 mA Battery capacity (Ah) 1 - 9999 Ah Operating temperature range -40 +50 °C (-40 - 120°F) VE.Direct port Yes Bistable relay 60 V / 1 A normally open (function can be inverted) Current ± 0,01 A Voltage ± 0,01 V Amp hours ± 0,1 Ah State of charge (0 - 100%) ± 0,1 % Time-to-go ± 1 min. Accuracy current measurement ± 0,4 % Accuracy voltage measurement ± 0,3 % Installation Flush mount Head unit front diameter 63 mm (2,5 inch) Head unit front bezel 69 × 69 mm (2,7 × 2,7 inch) Shunt connection bolts M10 (0,3937 inch) Head unit body diameter and depth 52 mm (2,0 inch) and 31 mm (1,2 inch) Head unit protection category IP55 (not intended for outdoor use) Safety EN 60335-1 Emission / immunity EN 55014-1 / EN 55014-2 Automotive directive ECE R10-4 / EN 50498 Shunt (included) 500 A / 50 mV Cables (included) 10 meter 6 core UTP with RJ12 connectors, / with 1 A slow blow fuse for battery positive connection Weight 1,07 kg Dimensions (h × w × d) 21 × 21 × 7 mm Item number BAM030710100 Download datasheet (PDF)

Read more less

Victron Shunt 500A/50 mV – battery monitoring with precise consumption measurementThe Victron Shunt 500A/50 mV is a battery monitor from Victron Energy that measures the actual current flowing in and out of the battery bank. You get the state of charge in percent, consumption, and expected remaining time — far more accurate than a simple voltage meter.Advantages Precise state of charge in percent: Measures the actual current into and out of the battery — not just the voltage. Remaining time and consumption: Shows how long power is left at current consumption levels. History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting. Application Precise display of the battery's state of charge in motorhomes and boats. Monitoring of consumption and remaining capacity in solar power systems. Troubleshooting and documentation of battery health over time. Specifications Specification Details Weight 0.35 kg Dimensions (H × W × D) 120 × 28 × 45 mm Item number SHU500050100

Read more less

Victron Shunt 1000A/50 mV – battery monitoring with precise consumption measurementThe Victron Shunt 1000A/50 mV is a battery monitor from Victron Energy that measures the actual current flowing in and out of the battery bank. You get the state of charge in percent, consumption, and expected remaining time — far more accurate than a simple voltage meter.Benefits Precise state of charge in percent: Measures the actual current flowing in and out of the battery — not just the voltage. Remaining time and consumption: Shows how long power will last at the current consumption rate. History: Stores data on depth of discharge, cycles, and voltage levels for troubleshooting. Applications Precise display of battery state of charge in motorhomes and boats. Monitoring of consumption and remaining capacity in solar power systems. Troubleshooting and documentation of battery condition over time. Specifications Specification Details Weight 1.1 kg Dimensions (h × w × d) 168 × 30 × 80 mm Part number SHU102050200

Read more less

Victron Monitor BMV-712 Smart – battery monitor with precise consumption measurementThe Victron Monitor BMV-712 Smart is a battery monitor from Victron Energy that measures the actual current flowing in and out of the battery bank. You get the state of charge in percent, consumption, and expected time remaining — far more accurate than a simple voltage meter, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages Precise state of charge in percent: Measures the actual current flowing in and out of the battery — not just the voltage. Time remaining and consumption: Shows how much power is left at current consumption levels. Built-in Bluetooth: All data directly on your phone in the VictronConnect app. VE.Direct port: Can be connected to a GX device so battery data is included on the VRM Portal. History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting. Application Precise display of battery state of charge in motorhomes and boats. Monitoring of consumption and remaining capacity in solar power systems. Troubleshooting and documentation of battery condition over time. Specifications Specification Details Supply voltage range 6.5 - 70 Vdc Current draw (backlight off) < 1 mA Input voltage range 6.5 - 70Vdc Battery capacity (Ah) 1 - 9999 Ah Operating temperature range -40 +50 °C (-40 - 120°F) Measures voltage of second battery, temperature or midpoint Yes Temperature measurement range -20 +50 °C (-4 - 120°F) VE.Direct port Yes Bistable relay 60 V / 1 A normally open (function can be inverted) Current ± 0.01 A Voltage ± 0.01 V Amp hours ± 0.1 Ah State of charge (0 - 100%) ± 0.1 % Time-to-go ± 1 min. Temperature range ± 1 °C/°F Accuracy current measurement ± 0.4 % Accuracy voltage measurement ± 0.3 % Installation Flush mount Head unit front diameter 63 mm (2.5 inch) Head unit front bezel 69 × 69 mm (2.7 × 2.7 inch) Shunt connection bolts M10 (0.3937 inch) Head unit body diameter and depth 52 mm (2.0 inch) and 31 mm (1.2 inch) Head unit protection category IP55 (not intended for outdoor use) Safety EN 60335-1 Emission / immunity EN 55014-1 / EN 55014-2 Automotive directive ECE R10-4 / EN 50498 Shunt (included) 500 A / 50 mV Cables (included) 10 meter 6 core UTP with RJ12 connectors, / 1 cable 2 cables with 1 A slow blow fuse for battery positive connection Temperature sensor optional (ASS000100000) Weight 1.33 kg Item number BAM030712000R Download datasheet (PDF)

Read more less

Victron Battery Monitor BMV-702 black – battery monitoring with precise consumption measurementThe Victron Battery Monitor BMV-702 black is a battery monitor from Victron Energy that measures the actual current flowing in and out of the battery bank. You get state of charge in percent, consumption, and expected time remaining — far more accurate than a simple voltage meter.Advantages Precise state of charge in percent: Measures the actual current in and out of the battery — not just the voltage. Time remaining and consumption: Shows how much power is left at the current rate of consumption. VE.Direct port: Can be connected to a GX device, allowing battery data to be included on the VRM Portal. History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting. Application Precise display of the battery's state of charge in camper vans and boats. Monitoring of consumption and remaining capacity in solar power systems. Troubleshooting and documentation of the battery's condition over time. Specifications Specification Details Supply voltage range 6.5 - 95 Vdc Current draw (backlight off) < 4 mA Input voltage range 6.5 - 95Vdc Battery capacity (Ah) 1 - 9999 Ah Operating temperature range -40 +50 °C (-40 - 120°F) Temperature measurement range -20 +50 °C (-4 - 120°F) VE.Direct port Yes Relay 60 V / 1 A normally open (function can be inverted) Current ± 0.01 A Voltage ± 0.01 V Amp hours ± 0.1 Ah State of charge (0 - 100%) ± 0.1 % Time-to-go ± 1 min. Temperature range ± 1 °C/°F Accuracy current measurement ± 0.4 % Accuracy voltage measurement ± 0.3 % Installation Flush mount Head unit front diameter 63 mm (2.5 inch) Head unit front bezel 69 × 69 mm (2.7 × 2.7 inch) Head unit body diameter and depth 52 mm (2.0 inch) and 31 mm (1.2 inch) Shunt connection bolts M10 (0.3937 inch) Head unit protection category IP55 (not intended for outdoor use) Safety EN 60335-1 Emission / immunity EN 55014-1 / EN 55014-2 Automotive directive ECE R10-4 / EN 50498 Shunt (included) 500 A / 50 mV Cables (included) 10 meter 6 core UTP with RJ12 connectors. / 2 cables with 1 A slow blow fuse for battery positive connection. Temperature sensor optional (ASS000100000) Weight 3 kg Dimensions (h × w × d) 30 × 65 × 65 mm Item number BAM010702200R Download datasheet (PDF)

Read more less

Victron Battery Monitor BMV-700H VDC – battery monitoring with precise consumption measurementThe Victron Battery Monitor BMV-700H VDC is a battery monitor from Victron Energy that measures the actual current flowing in and out of the battery bank. You get state of charge in percent, consumption, and expected time remaining — far more accurate than a simple voltage meter.Advantages Precise state of charge in percent: Measures the actual current flowing in and out of the battery — not just the voltage. Time remaining and consumption: Shows how long power is left at the current rate of consumption. VE.Direct port: Can be connected to a GX device, so battery data is included on the VRM Portal. History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting. Application Precise display of battery state of charge in motorhomes and boats. Monitoring of consumption and residual capacity in solar power systems. Troubleshooting and documentation of battery condition over time. Specifications Specification Details Supply voltage range 60 - 385 Vdc Current draw (backlight off) < 4 mA Battery capacity (Ah) 1 - 9999 Ah Operating temperature range -40 +50 °C (-40 - 120°F) VE.Direct port Yes Relay 60 V / 1 A normally open (function can be inverted) Current ± 0,01 A Voltage ± 0,01 V Amp hours ± 0,1 Ah State of charge (0 - 100%) ± 0,1 % Time-to-go ± 1 min. Current measurement accuracy ± 0,4 % Voltage measurement accuracy ± 0,3 % Installation Flush mount Head unit front diameter 63 mm (2,5 inch) Head unit front bezel 69 × 69 mm (2,7 × 2,7 inch) Head unit body diameter and depth 52 mm (2,0 inch) and 31 mm (1,2 inch) Shunt connection bolts M10 (0,3937 inch) Head unit protection category IP55 (not intended for outdoor use) Safety EN 60335-1 Emission / immunity EN 55014-1 / EN 55014-2 Automotive directive ECE R10-4 / EN 50498 Shunt (included) 500 A / 50 mV Cables (included) 10 meter 6 core UTP with RJ12 connectors. / 1 cable with 1 A slow blow fuse for battery positive connection. Temperature sensor optional (ASS000100000) Weight 1,067 kg Dimensions (h × w × d) 21 × 21 × 7 mm Item number BAM010700100 Download datasheet (PDF)

Read more less

Victron Battery Monitor BMV-702 – battery monitoring with precise consumption measurementThe Victron Battery Monitor BMV-702 is a battery monitor from Victron Energy that measures the actual current into and out of the battery bank. You get state of charge in percent, consumption, and expected time remaining — far more accurate than a simple voltage meter.Benefits Precise state of charge in percent: Measures the actual current into and out of the battery — not just the voltage. Time remaining and consumption: Shows how much power is left at the current consumption rate. VE.Direct port: Can be connected to a GX device so that battery data is included on the VRM Portal. History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting. Application Precise display of battery state of charge in motorhomes and boats. Monitoring of consumption and remaining capacity in solar energy systems. Troubleshooting and documentation of battery condition over time. Specifications Specification Details Supply voltage range 6.5 - 95 Vdc Current draw (backlight off) < 4 mA Input voltage range 6.5 - 95Vdc Battery capacity (Ah) 1 - 9999 Ah Operating temperature range -40 +50 °C (-40 - 120°F) Temperature measurement range -20 +50 °C (-4 - 120°F) VE.Direct port Yes Relay 60 V / 1 A normally open (function can be inverted) Current ± 0.01 A Voltage ± 0.01 V Amp hours ± 0.1 Ah State of charge (0 - 100%) ± 0.1 % Time-to-go ± 1 min. Temperature range ± 1 °C/°F Accuracy current measurement ± 0.4 % Accuracy voltage measurement ± 0.3 % Installation Flush mount Head unit front diameter 63 mm (2.5 inch) Head unit front bezel 69 × 69 mm (2.7 × 2.7 inch) Head unit body diameter and depth 52 mm (2.0 inch) and 31 mm (1.2 inch) Shunt connection bolts M10 (0.3937 inch) Head unit protection category IP55 (not intended for outdoor use) Safety EN 60335-1 Emission / immunity EN 55014-1 / EN 55014-2 Automotive directive ECE R10-4 / EN 50498 Shunt (included) 500 A / 50 mV Cables (included) 10 meter 6 core UTP with RJ12 connectors. / 2 cables with 1 A slow blow fuse for battery positive connection. Temperature sensor optional (ASS000100000) Weight 0.3 kg Dimensions (h × w × d) 30 × 65 × 65 mm Item number BAM010702000R Download datasheet (PDF)

Read more less

Victron Battery Monitor BMV-700 – battery monitoring with precise consumption measurementThe Victron Battery Monitor BMV-700 is a battery monitor from Victron Energy that measures the actual current flowing in and out of the battery bank. You get state-of-charge in percent, power consumption, and expected remaining time — far more accurate than a simple voltage meter.Advantages Precise state-of-charge in percent: Measures the actual current flowing in and out of the battery — not just the voltage. Remaining time and consumption: Shows how long power remains at the current consumption level. VE.Direct port: Can be connected to a GX device so battery data is included on the VRM Portal. History: Stores data on depth of discharge, cycles, and voltage levels for troubleshooting. Application Precise display of battery state-of-charge in campers and boats. Monitoring of consumption and remaining capacity in solar power systems. Troubleshooting and documentation of battery status over time. Specifications Specification Details Supply voltage range 6.5 - 95 Vdc Current draw (backlight off) < 4 mA Battery capacity (Ah) 1 - 9999 Ah Operating temperature range -40 +50 °C (-40 - 120°F) VE.Direct port Yes Relay 60 V / 1 A normally open (function can be inverted) Current ± 0.01 A Voltage ± 0.01 V Amp hours ± 0.1 Ah State of charge (0 - 100%) ± 0.1 % Time-to-go ± 1 min. Accuracy current measurement ± 0.4 % Accuracy voltage measurement ± 0.3 % Installation Flush mount Head unit front diameter 63 mm (2.5 inch) Head unit front bezel 69 × 69 mm (2.7 × 2.7 inch) Head unit body diameter and depth 52 mm (2.0 inch) and 31 mm (1.2 inch) Shunt connection bolts M10 (0.3937 inch) Head unit protection category IP55 (not intended for outdoor use) Safety EN 60335-1 Emission / immunity EN 55014-1 / EN 55014-2 Automotive directive ECE R10-4 / EN 50498 Shunt (included) 500 A / 50 mV Cables (included) 10 meter 6 core UTP with RJ12 connectors. / 1 cable with 1 A slow blow fuse for battery positive connection. Temperature sensor optional (ASS000100000) Weight 0.3 kg Dimensions (h × w × d) 30 × 65 × 65 mm Item number BAM010700000R Download datasheet (PDF)

Read more less

Victron Battery Monitor BMV- 712 Smart Black – battery monitoring with precise consumption measurementThe Victron Battery Monitor BMV-712 Smart Black is a battery monitor from Victron Energy that measures the actual current flowing into and out of the battery bank. You get state of charge in percentage, consumption, and expected time remaining — far more accurate than a simple voltage meter, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages Precise state of charge in percentage: Measures the actual current into and out of the battery — not just the voltage. Time remaining and consumption: Shows how much power is left at the current consumption level. Built-in Bluetooth: All data directly on your phone in the VictronConnect app. VE.Direct port: Can be connected to a GX device so that battery data is included on the VRM Portal. History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting. Application Precise display of the battery's state of charge in motorhomes and boats. Monitoring of consumption and remaining capacity in solar energy systems. Troubleshooting and documentation of battery status over time. Specifications Specification Details Supply voltage range 6.5 - 70 Vdc Current draw (backlight off) < 1 mA Input voltage range 6.5 - 70 Vdc Battery capacity (Ah) 1 - 9999 Ah Operating temperature range -40 +50 °C (-40 - 120°F) Measures voltage of second battery, temperature or midpoint Yes Temperature measurement range -20 +50 °C (-4 - 120°F) VE.Direct port Yes Bistable relay 60 V / 1 A normally open (function can be inverted) Current ± 0.01 A Voltage ± 0.01 V Amp hours ± 0.1 Ah State of charge (0 - 100%) ± 0.1 % Time-to-go ± 1 min. Temperature range ± 1 °C/°F Accuracy current measurement ± 0.4 % Accuracy voltage measurement ± 0.3 % Installation Flush mount Head unit front diameter 63 mm (2.5 inch) Head unit front bezel 69 × 69 mm (2.7 × 2.7 inch) Shunt connection bolts M10 (0.3937 inch) Head unit body diameter and depth 52 mm (2.0 inch) and 31 mm (1.2 inch) Head unit protection category IP55 (not intended for outdoor use) Safety EN 60335-1 Emission / immunity EN 55014-1 / EN 55014-2 Automotive directive ECE R10-4 / EN 50498 Shunt (included) 500 A / 50 mV Cables (included) 10 meter 6 core UTP with RJ12 connectors, 1 cable with 2 cables with 1 A slow blow fuse for battery positive connection Temperature sensor optional (ASS000100000) Weight 1.05 kg Part number BAM030712200R Download datasheet (PDF)

Read more less

Lithium Battery Capacity Tester / Voltmeter – 8–63V LCD DisplayA compact and user-friendly battery capacity tester designed for monitoring lithium batteries, including LiFePO4, Li-ion, and other 3.2V–3.7V cell types. By measuring both voltage and battery level as a percentage, the device provides a quick and reliable overview of the battery's condition – suitable for e-bikes, solar panels, power banks, small battery banks, and DIY projects.Advantages Voltage measurement from 8V to 63V: Supports most lithium battery packs from 3S up to 16S (e.g., 12V, 24V, 36V, 48V, 60V) Capacity indicator: Shows battery level both numerically (%) and graphically via a battery icon Automatic detection: Automatically identifies battery voltage and adjusts the display Easy-to-read LCD display: Backlit screen that clearly shows voltage and capacity even in low light Compact and easy to install: Simple integration into housings, battery boxes, and front panels Specifications Specification Details Voltage range 8–63V DC Compatible battery types LiFePO4, Li-ion (3S–16S) Display type LCD with backlight Measurement data Voltage (V), capacity (%) Operating temperature -10°C to +60°C Installation Flush mount (panel cutout) Color Black Cable connection 2-pin connector

Read more less

Victron Lynx Shunt VE.Can (M8) – battery monitor with precise consumption measurementThe Victron Lynx Shunt VE.Can (M8) is a battery monitor from Victron Energy that measures the actual current flowing in and out of the battery bank. You get the state of charge in percent, consumption, and estimated time remaining — far more accurate than a simple voltage meter.Advantages Precise state of charge in percent: Measures the actual current flowing in and out of the battery — not just the voltage. Time remaining and consumption: Shows how much power is left at the current consumption rate. History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting. Applications Precise display of battery state of charge in motorhomes and boats. Monitoring of consumption and remaining capacity in solar power systems. Troubleshooting and documentation of battery health over time. Specifications Specification Details Supported system voltages 12, 24 or 48V Reverse polarity protection No Current rating 1000 Adc continuous Power consumption 60 mA @ 12V / 33 mA @ 24V / 20 mA @ 48V Potential free alarm contact 3 A, 30 Vdc, 250 Vac Supply voltage range 9 - 70 Vdc Busbar M8 Fuse M8 (a Mega fuse can be installed on M6 bolts) VE.Can RJ45 and RJ45 terminator Power supply connection to Lynx Distributor RJ10 (a RJ10 cable ships with each Lynx Distributor) Temperature sensor terminal connector (Sensor included) Relay screw terminal Enclosure material ABS Enclosure dimensions (hxwxd) 190 × 180 × 80 mm Unit weight 1.4 kg Busbar material Tinned copper Busbar dimensions (hxw) 8 × 30 mm Operating temperature range -40 °C to +60 °C Storage temperature -40 °C to +60 °C Humidity max. 95 % (non-condensing) Protection class IP22 Item number victron-lynx-shunt-ve-can-d8d665

Read more less

Vic tron SmartShunt 2000A/50 mV IP65 Bluetooth monitor – battery monitoring with precise consumption measurementThe Victron SmartShunt 2000A/50 mV IP65 Bluetooth monitor is a battery monitor from Victron Energy that measures the actual current flowing into and out of the battery bank. You get the state of charge in percentage, consumption, and expected time remaining — far more accurate than a simple voltage meter, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Benefits Precise state of charge in percentage: Measures the actual current into and out of the battery — not just the voltage. Time remaining and consumption: Shows how much power is left at the current consumption rate. Bluetooth built-in: All data directly on your phone in the VictronConnect app. VE.Direct port: Can be connected to a GX device, so battery data is included on the VRM Portal. History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting. Applications Precise display of the battery's state of charge in motorhomes and boats. Monitoring of consumption and remaining capacity in solar power systems. Troubleshooting and documentation of the battery's condition over time. Specifications Specification Details Supply voltage range 6.5 - 70 Vdc Current draw < 1 mA Input voltage range 6.5 - 70 Vdc Battery capacity (Ah) 1 - 9999 Ah Operating temperature range -40 +50 °C (-40 - 120°F) Auxiliary input Measures voltage of second battery, temperature* or midpoint Temperature measurement range -20 +50 °C VE.Direct port Yes Current ± 0.01 A Voltage ± 0.01 V Amp hours ± 0.1 Ah State of charge (0 - 100%) ± 0.1 % Time-to-go ± 1 min. Temperature range ± 1 °C/°F Accuracy current measurement ± 0.4 % Offset Less than 10 / 10 / 20 / 40 mA Accuracy voltage measurement ± 0.3 % Dimensions (h × w × d) 300 A: 44 × 120 × 38 mm / 500 A: 46 × 120 × 54 mm / 1000 A: 68 × 168 × 75 mm / 2000 A: 68 × 168 × 100 mm Shunt connection bolts 300 A: M8 / 500 A, 1000 A, 2000 A: M10 (0.3937 inch) Protection class IP65 (encapsulated) Safety EN 60335-1, IEC 61010-1 Emission / immunity EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3 Automotive directive EN 50498 Vbatt cable 1.5 m red cable, with 1 A slow blow fuse and M10 eye terminals Aux cable 1.5 m red cable, with 1 A slow blow fuse and M10 eye terminals Temperature sensor optional (ASS000100000) SmartShunt IP 300 A / 500 A / 1000 A / 2000 A Item number victron-smartshunt-2000a-ip65-c1fbab

Read more less

Victron SmartShunt 500A/50 mV IP65 Bluetooth monitor – battery monitor with precise consumption measurementThe Victron SmartShunt 500A/50 mV IP65 Bluetooth monitor is a battery monitor from Victron Energy that measures the actual current into and out of the battery bank. You get state of charge in percent, consumption, and expected remaining time — far more accurate than a simple voltage meter, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages Precise state of charge in percent: Measures the actual current into and out of the battery — not just the voltage. Remaining time and consumption: Shows how much power is left at current consumption levels. Built-in Bluetooth: All data directly on your phone in the VictronConnect app. History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting. Application Precise display of battery state of charge in motorhomes and boats. Monitoring of consumption and remaining capacity in solar energy systems. Troubleshooting and documentation of battery health over time. Specifications Specification Details Item number victron-smartshunt-500a-ip65-c1faa3

Read more less

Victron SmartShunt 1000A/50 mV IP65 Bluetooth Monitor – battery monitor with precise consumption measurementThe Victron SmartShunt 1000A/50 mV IP65 Bluetooth monitor is a battery monitor from Victron Energy that measures the actual current into and out of the battery bank. You get state of charge in percentage, consumption, and expected time remaining — far more accurate than a simple voltage meter, and built-in Bluetooth makes it possible to track operation and change settings directly from the VictronConnect app.Advantages Precise state of charge in percentage: Measures the actual current into and out of the battery — not just the voltage. Time remaining and consumption: Shows how much power is left at the current rate of consumption. Bluetooth built-in: All data directly on your phone in the VictronConnect app. VE.Direct port: Can be connected to a GX device, so battery data is included on the VRM Portal. History: Saves data on deepest discharge, cycles, and voltage levels for troubleshooting. Application Precise display of the battery's state of charge in motorhomes and boats. Monitoring of consumption and remaining capacity in solar power systems. Troubleshooting and documentation of the battery's condition over time. Specifications Specification Details Supply voltage range 6.5 - 70 Vdc Current draw < 1 mA Input voltage range 6.5 - 70 Vdc Battery capacity (Ah) 1 - 9999 Ah Operating temperature range -40 +50 °C (-40 - 120°F) Auxiliary input Measures voltage of second battery, temperature* or midpoint Temperature measurement range -20 +50 °C VE.Direct port Yes Current ± 0.01 A Voltage ± 0.01 V Amp hours ± 0.1 Ah State of charge (0 - 100%) ± 0.1 % Time-to-go ± 1 min. Temperature range ± 1 °C/°F Accuracy current measurement ± 0.4 % Offset Less than 10 / 10 / 20 / 40 mA Accuracy voltage measurement ± 0.3 % Dimensions (h × w × d) 300 A: 44 × 120 × 38 mm / 500 A: 46 × 120 × 54 mm / 1000 A: 68 × 168 × 75 mm / 2000 A: 68 × 168 × 100 mm Shunt connection bolts 300 A: M8 / 500 A, 1000 A, 2000 A: M10 (0.3937 inch) Protection class IP65 (encapsulated) Safety EN 60335-1, IEC 61010-1 Emission / immunity EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3 Automotive directive EN 50498 Vbatt cable 1.5 m red cable, with 1 A slow blow fuse and M10 eye terminals Aux cable 1.5 m red cable, with 1 A slow blow fuse and M10 eye terminals Temperature sensor optional accessory (ASS000100000) SmartShunt IP 300 A / 500 A / 1000 A / 2000 A Item number victron-smartshunt-1000a-ip65-c1fa1e

Read more less

Victron SmartShunt 300A/50 mV Bluetooth monitor – battery monitoring with precise consumption measurementThe Victron SmartShunt 300A/50 mV Bluetooth monitor is a battery monitor from Victron Energy that measures the actual current flowing in and out of the battery bank. You get the state of charge in percentage, consumption, and expected time remaining — far more accurate than a simple voltage gauge, and built-in Bluetooth makes it possible to track operation and change settings directly from the VictronConnect app.Advantages Precise state of charge in percentage: Measures the actual current into and out of the battery — not just the voltage. Time remaining and consumption: Shows how much power is left at the current consumption level. Built-in Bluetooth: All data directly on your phone in the VictronConnect app. History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting. Application Precise display of the battery's state of charge in motorhomes and boats. Monitoring of consumption and remaining capacity in solar power systems. Troubleshooting and documentation of the battery's condition over time. Specifications Specification Details Item number victron-smartshunt-300a-24aa3e

Read more less

Battery Monitor Hall Coulomb Meter DC 8–100V 200AAn advanced battery monitor for precise monitoring of battery systems, compatible with LiFePO4, Li-ion, and lead-acid batteries. Suitable for solar power systems, electric vehicles, marine applications, and off-grid systems.Advantages Universal compatibility: Supports LiFePO4, Li-ion, and lead-acid batteries Precise measurement: Real-time data for voltage, current, capacity, and charge/discharge time Hall effect sensor: Ensures accurate and contactless current measurement User-friendly display: LCD screen with green backlight Compact design: Easy installation in various applications Energy-saving: Low power consumption, with the option to turn off the backlight Specifications Specification Details Voltage range 8–100V DC Current measurement Up to 200A via Hall sensor Capacity range 0–99,999 Ah Measurement accuracy ±1% for voltage, current, and capacity Working current 7.5 mA (3.5 mA with backlight off) Display 49 × 24 mm LCD with green backlight Unit dimensions 79 × 43 × 27 mm Panel cutout 76.5 × 39.5 mm Operating temperature -10°C to +65°C Material Black ABS plastic Wire length 15 cm

Read more less

100W Foldable Portable Solar PanelA portable and efficient solar panel for camping, boats, and off-grid use. The foldable design makes it easy to transport and set up wherever you are – perfect as backup power or a mobile energy source for power stations, 12V batteries, laptops, and smartphones.Benefits High energy efficiency: Up to 23% conversion efficiency Compact and portable: Lightweight construction in a foldable format Robust and weather-resistant: Water and dust resistant (IP65) Smart charging: Built-in intelligent charging technology for safe operation Wide compatibility: Suitable for power stations, 12V batteries, and other electronic equipment Specifications Specification Details Power 100W Efficiency Up to 23% Voltage at max. power (Vmp) 18V Current at max. power (Imp) 5.56A Open circuit voltage (Voc) 21.6V Short circuit current (Isc) 6.1A Connector type MC4 connectors Material EVA + PET surface Protection class IP65 (panel) Operating temperature -20°C to +65°C Dimensions folded (H×W×L) 56 × 44 × 20 cm Dimensions unfolded Approx. 124 × 56 cm Weight 4.1 kg Warranty 2 years Package includes 1 x 100W foldable solar panel 1 x MC4 cable Adapters for specific devices can be purchased separately.

Read more less