Victron Phoenix Inverter 48V/5000W 220V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 48V/5000W 220V is a pure sine wave inverter from Victron Energy that converts your battery's DC power into 230V AC power. It delivers 5000 VA continuously with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
5000 VA continuous output power: With a peak power of 10000 W, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run without issues.
Up to 95 / 96% efficiency: More of the battery's energy ends up as usable 230V power.
Low idle consumption (18 / 20 W): Can be left on without draining the battery unnecessarily.
Input voltage 37.2 - 68 V: Works stably across the entire battery voltage range.
Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats, where mains power is needed without a shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
37.2 - 68 V
AC output
230Vac ±2%, 50 Hz or 60 Hz ± 0.1% (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
5000 VA
Continuous output power at 40 °C
3700 W
Continuous output power at 65 °C
2800 W
Peak power
10000 W
Output short-circuit current
43.5 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
95 / 96%
Zero-load consumption
18 / 20 W
Zero-load consumption in ECO mode
2.2 / 3.2 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
ECO mode power limit
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan-cooled)
Humidity (non-condensing)
max. 95%.
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Enclosure class
IP21
Battery connection terminals
24V: 2+2 M8 bolts 48V: M8 bolts
Weight
29 kg / 28 kg
Dimensions (h × w × d)
555 × 295 × 160 mm (48V)
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
48 V
Item number
PIN485020000
Download datasheet (PDF)
Victron Phoenix Inverter 2 4V/3000W/220V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 24V/3000W/220V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It delivers 3000 VA continuously with the same power quality as the mains grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
3000 VA continuous output power: With a peak power of 6000 VA, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains grid, so sensitive electronics, motors, and pumps run without issues.
Up to 93 / 94 / 95 % efficiency: More of the battery's energy is converted into usable 230V power.
Low no-load consumption (12 / 13 / 15 W): Can be left on without unnecessarily draining the battery.
Input voltage 8.6 - 34 V: Operates stably across the entire voltage range of the battery.
Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats that require mains power without shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
8.6 - 34 V
AC output
230Vac ±2 %, 50 Hz or 60 Hz ± 0.1 % (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
3000 VA
Continuous output power at 40 °C
2200 W
Continuous output power at 65 °C
1700 W
Peak power
6000 VA
Output short-circuit current
26.0 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
93 / 94 / 95 %
No-load consumption
12 / 13 / 15 W
No-load consumption in ECO mode
1.5 / 1.9 / 2.8 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
ECO mode power limit
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan-cooled)
Humidity (non-condensing)
max. 95 %.
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
12V/24V: 2+2 M8 bolts 48V: M8 bolts
Weight
19 kg
Dimensions (h × w × d)
533 × 285 × 150 mm (12V) / 485 × 285 × 150 mm (24/28 V)
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
24 V
Item number
PIN243020000
Download datasheet (PDF)
Victron Phoenix Inverter 24V/5000W/220V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 24V/5000W/220V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It delivers 5000 VA continuously with the same power quality as the mains grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
5000 VA continuous output power: With a peak power of 10000 W, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains grid, so sensitive electronics, motors, and pumps run without issues.
Up to 95 / 96% efficiency: More of the battery's energy ends up as usable 230V power.
Low standby consumption (18 / 20 W): Can be left on without unnecessarily draining the battery.
Input voltage 8.6 - 34 V: Works stably across the battery's entire voltage range.
Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
8.6 - 34 V
AC output
230Vac ±2 %, 50 Hz or 60 Hz ± 0.1 % (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
5000 VA
Continuous output power at 40 °C
3700 W
Continuous output power at 65 °C
2800 W
Peak power
10000 W
Output short-circuit current
43.5 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
95 / 96 %
Zero-load consumption
18 / 20 W
Zero-load consumption in ECO mode
2.2 / 3.2 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
Power threshold for ECO mode
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95 %.
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Enclosure class
IP21
Battery connection terminals
24V: 2+2 M8 bolts 48V: M8 bolts
Weight
29 kg / 28 kg
Dimensions (h × w × d)
595 × 295 × 160 mm (24V)
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive Directive
ECE R10-5
Nominal voltage
24 V
Item number
PIN245020000
Download datasheet (PDF)
Victron Phoenix Inverter 24V/1600W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 24V/1600W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run without issues.
Low idle consumption (14 W): Can remain switched on without draining the battery unnecessarily.
Input voltage 18.4 - 34 V: Operates stably throughout the battery's entire voltage range.
Applications
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore power connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Item number
PINx × 2161X00
Continuous power at 25 °C
1450 W
Continuous power at 40 °C
1300 W
Time-limited power (cold start)
1600 W/1h
Peak power
2100 W/15s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
18.4 - 34 V
Low battery voltage disconnect
18.6 V
Dynamic low voltage disconnect (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
21.8 V
Charged battery detection
28 V
Max. efficiency
91 %
Zero-load consumption
14 W
ECO mode power threshold
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
25 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
8.9 kg
Dimensions (h × w × d)
117 × 231 × 365
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax × 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
24 V
Item number
PIN242161000
Download datasheet (PDF)
Victron Phoenix Inverter 48V/3000W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 48V/3000W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It delivers 3000 VA continuously with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Benefits
3000 VA continuous output power: With a peak power of 6000 VA, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run without issues.
Up to 93 / 94 / 95 % efficiency: More of the battery's energy ends up as usable 230V power.
Low idle consumption (12 / 13 / 15 W): Can be left on without unnecessarily draining the battery.
Input voltage 37.2 - 68 V: Operates stably throughout the entire battery voltage range.
Application
230V power for refrigerators, coffee machines, and tools in campers and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
37.2 - 68 V
AC output
230Vac ±2 %, 50 Hz or 60 Hz ± 0.1 % (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
3000 VA
Continuous output power at 40 °C
2200 W
Continuous output power at 65 °C
1700 W
Peak power
6000 VA
Short-circuit current at output
26.0 A
Dynamic DC low shut down
load dependant, configurable, see Dynamic cut off chapter
Max. efficiency
93 / 94 / 95 %
Zero-load consumption
12 / 13 / 15 W
Zero-load consumption in ECO mode
1.5 / 1.9 / 2.8 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
Power limit for ECO mode
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95 %.
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
12V/24V: 2+2 M8 bolts 48V: M8 bolts
Weight
19 kg
Dimensions (h × w × d)
533 × 285 × 150 mm (12V) / 485 × 285 × 150 mm (24/28 V)
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
48 V
Item number
PIN483020000
Download datasheet (PDF)
Victron Phoenix Inverter 24V/5000W Smart – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 24V/5000W Smart is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It delivers 5000 VA continuously with the same power quality as the mains, ensuring sensitive electronics, motors, and pumps run smoothly, and built-in Bluetooth allows you to monitor operation and change settings directly from the VictronConnect app.Benefits
5000 VA continuous output power: With a peak power of 10000 W, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Up to 95 / 96% efficiency: More of the battery's energy ends up as usable 230V power.
Low standby consumption (18 / 20 W): Can be left on without unnecessarily draining the battery.
Input voltage 8.6 - 34 V: Works stably throughout the battery's entire voltage range.
Bluetooth built-in: Monitor and configure the inverter from the VictronConnect app.
Application
230V power for refrigerators, coffee makers, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
8.6 - 34 V
AC output
230Vac ±2%, 50 Hz or 60 Hz ± 0.1% (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
5000 VA
Continuous output power at 40 °C
3700 W
Continuous output power at 65 °C
2800 W
Peak power
10000 W
Output short-circuit current
43.5 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
95 / 96%
Zero-load consumption
18 / 20 W
Zero-load consumption in ECO mode
2.2 / 3.2 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
ECO mode power threshold
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95%
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
24V: 2+2 M8 bolts 48V: M8 bolts
Weight
29 kg / 28 kg
Dimensions (h × w × d)
595 × 295 × 160 mm (24V)
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
24 V
Item number
PIN242501000
Download datasheet (PDF)
Victron Phoenix Inverter 12V/3000W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 12V/3000W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It delivers 3000 VA continuously with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
3000 VA continuous output power: With a peak power of 6000 VA, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Up to 93 / 94 / 95 % efficiency: More of the battery's energy ends up as usable 230V power.
Low idle consumption (12 / 13 / 15 W): Can be left on without unnecessarily draining the battery.
Input voltage 9.3 - 17 V: Operates stably throughout the battery's voltage range.
Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
9.3 - 17 V
AC output
230Vac ±2 %, 50 Hz or 60 Hz ± 0.1 % (nonlinear load, crest factor 3:1)
Continuous output power at 25 °C
3000 VA
Continuous output power at 40 °C
2200 W
Continuous output power at 65 °C
1700 W
Peak power
6000 VA
Short-circuit current on output
26.0 A
Dynamic DC low shutdown
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
93 / 94 / 95 %
Zero-load consumption
12 / 13 / 15 W
Zero-load consumption in ECO mode
1.5 / 1.9 / 2.8 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
Power limit for ECO mode
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95 %.
Max. altitude above sea level
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
12V/24V: 2+2 M8 bolts 48V: M8 bolts
Weight
19 kg
Dimensions (h × w × d)
533 × 285 × 150 mm (12V) / 485 × 285 × 150 mm (24/48 V)
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive Directive
ECE R10-5
Nominal voltage
12 V
Item number
PIN123020000
Download datasheet (PDF)
Victron Phoenix Inverter 12V/2000W Smart – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 12V/2000W Smart is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It delivers 2000 VA continuously with the same power quality as the electrical grid, ensuring that sensitive electronics, motors, and pumps run smoothly, while built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
2000 VA continuous output power: With a peak power of 4000 VA, it also handles short-term start-up currents.
Pure sine wave: Provides the same power quality as the electrical grid, ensuring that sensitive electronics, motors, and pumps run without issues.
Up to 92 / 94 / 94% efficiency: More of the battery's energy ends up as usable 230V power.
Low standby consumption (8 / 9 / 11 W): Can be left on without draining the battery unnecessarily.
Input voltage 9.3 - 17 V: Operates stably across the entire battery voltage range.
Built-in Bluetooth: Monitor and configure the inverter from the VictronConnect app.
Applications
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in holiday homes and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
9.3 - 17 V
AC output
230Vac ±2%, 50 Hz or 60 Hz ± 0.1% (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
2000 VA
Continuous output power at 40 °C
1450 W
Continuous output power at 65 °C
1000 W
Peak power
4000 VA
Short-circuit current on output
17.4 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
92 / 94 / 94%
Zero-load consumption
8 / 9 / 11 W
Zero-load consumption in ECO mode
0.6 / 1.3 / 2.1 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
Power limit for ECO mode
adjustable via VictronConnect app
Protection
short circuit on output, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95%
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
M8 bolts
Weight
13 kg
Dimensions (h × w × d)
485 × 219 × 125 mm
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
12 V
Item number
PIN122201000
Download datasheet (PDF)
Victron Phoenix Inverter 12V/3000W Smart – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 12V/3000W Smart is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC. It delivers 3000 VA continuously with the same power quality as the mains, ensuring sensitive electronics, motors, and pumps run smoothly, while built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
3000 VA continuous output power: With a peak power of 6000 VA, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Up to 93 / 94 / 95 % efficiency: More of the battery's energy ends up as usable 230V power.
Low idle consumption (12 / 13 / 15 W): Can be left on without draining the battery unnecessarily.
Input voltage 9.3 - 17 V: Works stably across the entire battery voltage range.
Bluetooth built-in: Monitor and configure the inverter from the VictronConnect app.
Application
230V power for refrigerator, coffee machine, and tools in motorhomes and vans.
Boats that need mains power without shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
9.3 - 17 V
AC output
230Vac ±2 %, 50 Hz or 60 Hz ± 0.1 % (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
3000 VA
Continuous output power at 40 °C
2200 W
Continuous output power at 65 °C
1700 W
Peak power
6000 VA
Output short-circuit current
26.0 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
93 / 94 / 95 %
Zero-load consumption
12 / 13 / 15 W
Zero-load consumption in ECO mode
1.5 / 1.9 / 2.8 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
Power threshold for ECO mode
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95 %
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
12V/24V: 2+2 M8 bolts 48V: M8 bolts
Weight
19 kg
Dimensions (h × w × d)
533 × 285 × 150 mm (12V) / 485 × 285 × 150 mm (24/28 V)
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
12 V
Item number
PIN122300000
Download datasheet (PDF)
Victron Phoenix Inverter.smart 48V/2000 Smart – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter.smart 48V/2000 Smart is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It delivers 2000 VA continuously with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
2000 VA continuous output power: With a peak power of 4000 VA, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Up to 92 / 94 / 94% efficiency: More of the battery's energy ends up as usable 230V power.
Low idle consumption (8 / 9 / 11 W): Can be left on without draining the battery unnecessarily.
Input voltage 37.2 - 68 V: Works stably throughout the battery's entire voltage range.
Built-in Bluetooth: Monitor and configure the inverter from the VictronConnect app.
Application
230V power for refrigerator, coffee machine, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
37.2 - 68 V
AC output
230Vac ±2%, 50 Hz or 60 Hz ± 0.1% (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
2000 VA
Continuous output power at 40 °C
1450 W
Continuous output power at 65 °C
1000 W
Peak power
4000 VA
Output short-circuit current
17.4 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
92 / 94 / 94%
Zero-load consumption
8 / 9 / 11 W
Zero-load consumption in ECO mode
0.6 / 1.3 / 2.1 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
Power limit for ECO mode
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95%
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
M8 bolts
Weight
13 kg
Dimensions (h × w × d)
485 × 219 × 125 mm
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
48 V
Item number
PIN482201000
Download datasheet (PDF)
Victron Phoenix Inverter 12V/1600W Smart – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 12V/1600W Smart is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It delivers 1600 VA continuously with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
1600 VA continuous output power: With a peak power of 3000 VA, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run without issues.
Up to 92 / 94 / 94% efficiency: More of the battery's energy ends up as usable 230V power.
Low idle consumption (8 / 9 / 11 W): Can be left on without draining the battery unnecessarily.
Input voltage 9.3 - 17 V: Operates stably throughout the battery's entire voltage range.
Built-in Bluetooth: Monitor and configure the inverter from the VictronConnect app.
Application
230V power for refrigerator, coffee machine, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
9.3 - 17 V
AC output
230Vac ±2%, 50 Hz or 60 Hz ± 0.1% (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
1600 VA
Continuous output power at 40 °C
1200 W
Continuous output power at 65 °C
800 W
Peak power
3000 VA
Output short-circuit current
13.9 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
92 / 94 / 94%
Zero-load consumption
8 / 9 / 11 W
Zero-load consumption in ECO mode
0.6 / 1.3 / 2.1 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
Power threshold for ECO mode
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95%.
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
M8 bolts
Weight
12 kg
Dimensions (h × w × d)
485 × 219 × 125 mm
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
12 V
Item number
PIN122161000
Download datasheet (PDF)
Victron Phoenix Inverter Smart 24V/2000W – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter Smart 24V/2000W is a pure sine wave inverter from Victron Energy that converts your battery's DC power into 230V AC power. It delivers 2000 VA continuously with the same power quality as the grid, ensuring that sensitive electronics, motors, and pumps run smoothly, while built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
2000 VA continuous output power: With a peak power of 4000 VA, it also handles short-term inrush currents.
Pure sine wave: Provides the same power quality as the grid, so sensitive electronics, motors, and pumps run without issues.
Up to 92 / 94 / 94% efficiency: More of the battery's energy ends up as usable 230V power.
Low standby consumption (8 / 9 / 11 W): Can be left on without unnecessarily draining the battery.
Input voltage 8.6 - 34 V: Works stably across the entire battery voltage range.
Built-in Bluetooth: Monitor and configure the inverter from the VictronConnect app.
Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore power connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
8.6 - 34 V
AC output
230Vac ±2%, 50 Hz or 60 Hz ± 0.1% (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
2000 VA
Continuous output power at 40 °C
1450 W
Continuous output power at 65 °C
1000 W
Peak power
4000 VA
Output short-circuit current
17.4 A
Dynamic DC low shut down
load dependant, configurable, see Dynamic cut off chapter
Max. efficiency
92 / 94 / 94%
Zero-load consumption
8 / 9 / 11 W
Zero-load consumption in ECO mode
0.6 / 1.3 / 2.1 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
ECO mode power limit
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95%.
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
M8 bolts
Weight
13 kg
Dimensions (h × w × d)
485 × 219 × 125 mm
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
24 V
Item number
PIN242201000
Download datasheet (PDF)
Victron Phoenix Inverter, Smart 24V/3000W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter, Smart 24V/3000W/230V is a pure sine wave inverter from Victron Energy that converts your battery's DC power into 230V AC power. It delivers 3000 VA continuously with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly, while built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
3000 VA continuous output power: With a peak power of 6000 VA, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Up to 93 / 94 / 95% efficiency: More of the battery's energy ends up as usable 230V power.
Low idle consumption (12 / 13 / 15 W): Can be left on without draining the battery unnecessarily.
Input voltage 18.4 - 34 V: Operates stably throughout the battery's entire voltage range.
Bluetooth built-in: Monitor and configure the inverter from the VictronConnect app.
Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
18.4 - 34 V
AC output
230Vac ±2 %, 50 Hz or 60 Hz ± 0.1 % (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
3000 VA
Continuous output power at 40 °C
2200 W
Continuous output power at 65 °C
1700 W
Peak power
6000 VA
Output short-circuit current
26.0 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
93 / 94 / 95 %
Zero-load consumption
12 / 13 / 15 W
Zero-load consumption in ECO mode
1.5 / 1.9 / 2.8 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
Power limit for ECO mode
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95 %.
Max. altitude above sea level
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
12V/24V: 2+2 M8 bolts 48V: M8 bolts
Weight
19 kg
Dimensions (h × w × d)
533 × 285 × 150 mm (12V) / 485 × 285 × 150 mm (24/28 V)
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
24 V
Item number
PIN242300000
Download datasheet (PDF)
Victron Phoenix Inverter 48V/5000W/220V Smart – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 48V/5000W/220V Smart is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It delivers 5000 VA continuously with the same power quality as the grid, ensuring sensitive electronics, motors, and pumps run smoothly, and built-in Bluetooth allows you to monitor operation and change settings directly from the VictronConnect app.Advantages
5000 VA continuous output power: With a peak power of 10000 W, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the electrical grid, so sensitive electronics, motors, and pumps run without issues.
Up to 95 / 96% efficiency: More of the battery's energy ends up as usable 230V power.
Low standby consumption (18 / 20 W): Can be left on without draining the battery unnecessarily.
Input voltage 37.2 - 68 V: Operates stably throughout the battery's entire voltage range.
Built-in Bluetooth: Monitor and configure the inverter from the VictronConnect app.
Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
37.2 - 68 V
AC output
230Vac ±2 %, 50 Hz or 60 Hz ± 0.1 % (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
5000 VA
Continuous output power at 40 °C
3700 W
Continuous output power at 65 °C
2800 W
Peak power
10000 W
Output short-circuit current
43.5 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
95 / 96 %
Zero-load consumption
18 / 20 W
Zero-load consumption in ECO mode
2.2 / 3.2 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
Power threshold for ECO mode
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95 %
Max. altitude
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
24V: 2+2 M8 bolts 48V: M8 bolts
Weight
29 kg / 28 kg
Dimensions (h × w × d)
555 × 295 × 160 mm (48V)
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive Directive
ECE R10-5
Nominal voltage
48 V
Item number
PIN482500000
Download datasheet (PDF)
Victron Phoenix Inverter.smart 48V/3000W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter.smart 48V/3000W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It delivers 3000 VA continuously with the same power quality as the mains, ensuring sensitive electronics, motors, and pumps run smoothly, while built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
3000 VA continuous output power: With a peak power of 6000 VA, it also handles short-term starting currents.
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Up to 93 / 94 / 95 % efficiency: More of the battery's energy ends up as usable 230V power.
Low idle consumption (12 / 13 / 15 W): Can be left on without draining the battery unnecessarily.
Input voltage 37.2 - 68 V: Works stably across the entire battery voltage range.
Built-in Bluetooth: Monitor and configure the inverter from the VictronConnect app.
Application
230V power for refrigerator, coffee machine, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Parallel and 3-phase operation
No
Input voltage range
37.2 - 68 V
AC output
230Vac ±2 %, 50 Hz or 60 Hz ± 0.1 % (non-linear load, crest factor 3:1)
Continuous output power at 25 °C
3000 VA
Continuous output power at 40 °C
2200 W
Continuous output power at 65 °C
1700 W
Peak power
6000 VA
Short-circuit current on output
26.0 A
Dynamic DC low shut down
load dependent, configurable, see Dynamic cut off chapter
Max. efficiency
93 / 94 / 95 %
Zero-load consumption
12 / 13 / 15 W
Zero-load consumption in ECO mode
1.5 / 1.9 / 2.8 W
Programmable relay
DC rating 4 A@35 V or 1 A@60 V, AC rating: 3 A@230 V
Power threshold for ECO mode
adjustable via VictronConnect app
Protection
output short circuit, overload, low battery voltage, high battery voltage, overtemperature, AC voltage on AC output, high DC ripple.
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan cooled)
Humidity (non-condensing)
max. 95 %.
Max. altitude above sea level
2000 m
Pollution degree classification
PDII
Overvoltage category
Mains: OVII
Material and color
steel (blue RAL 5012; and black RAL 9017)
Protection class
IP21
Battery connection terminals
12V/24V: 2+2 M8 bolts 48V: M8 bolts
Weight
19 kg
Dimensions (h × w × d)
533 × 285 × 150 mm (12V) / 485 × 285 × 150 mm (24/48 V)
Safety
EN-IEC 60335-1
Emission Immunity
EN 55014-1 / EN 55014-2 / EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
ECE R10-5
Nominal voltage
48 V
Item number
PIN482300000
Download datasheet (PDF)
Victron Sun Inverter 12/250-15 IEC – pure sine wave inverter for 230V mains powerThe Victron Sun Inverter 12/250-15 IEC is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Up to 87% efficiency: More of the battery's energy ends up as usable 230V power.
Low idle consumption (4.2 W): Can be left on without unnecessarily draining the battery.
Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Continuous power at 25 °C
250 VA
Continuous power at 40 °C
175 W
Peak power
400 W
AC output voltage
230 Vac +/- 3 %
AC output frequency
50 Hz or 60 Hz +/- 0.1 %
DC input voltage range
9.2 - 17 Vdc
Low battery voltage shutdown (adjustable)
9.3 Vdc
Low battery voltage restart & alarm (adjustable)
10.9 Vdc
Battery charged detection voltage (adjustable)
14.0 Vdc
Max. efficiency
87 %
Zero-load consumption
4.2 W
Zero-load consumption in ECO mode
0.8 W
Power limit for ECO mode
adjustable via VictronConnect app
Technology
Pulse Width Modulation (PWM)
Max. PV array voltage
25 Vdc
Max. PV array current
15 A
Max. PV array power
375 W
Solar panel type
36 cell solar panel
PV array voltage to initiate battery charging
voltage that is higher than battery voltage
Charging voltages
adjustable via VictronConnect app
Temperature-compensated charging
Yes, via an optional temperature sensor
Protection
a – f
Operating temperature range
-40 to +60 °C (fan-cooled)
Humidity
max. 95 %
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Material
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross section
10 mm² or AWG
PV connection terminals
screw terminals
Max. PV cable cross section
4 mm² or AWG 12
AC outlets
IEC-320 (male plug included)
Protection class
IP 21
Weight
2.4 kg / 5.3 lbs
Dimensions (h × w × d)
86 × 165 × 260 mm
Remote on/off
Yes, can be used for remotely turning unit on/off, or for battery temperature sensing.
Battery temperature sensor
Use Temperature sensor QUA PMP GX Device or a Smart battery Sense.
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1 / EN/IEC 62109-1
EMC
EN 55014-1 / EN 55014-2
Automotive directive
ECE R10-4 EN 50498
Nominal voltage
12 V
Item number
SIN121251100
Download datasheet (PDF)
Victron Phoenix Inverter 48V/250W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 48V/250W/230V is a pure sine wave inverter from Victron Energy that converts battery DC power into 230V AC power. It provides stable 230V power with the same quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Benefits
Pure sine wave: Provides the same power quality as the mains, allowing sensitive electronics, motors, and pumps to run without issues.
Low idle consumption (8 W): Can be left on without unnecessarily draining the battery.
Input voltage 36.8 - 62 V: Operates stably across the entire battery voltage range.
Applications
230V power for refrigerators, coffee machines, and tools in campers and vans.
Boats that need mains power without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Item number
PINx × 1251X10
Continuous power at 25 °C
250 W
Continuous power at 40 °C
200 W
Time-limited power (cold start)
300 W/15s
Peak power
400 W/2s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
36.8 - 62 V
Low battery voltage shutdown
37.2 V
Dynamic low voltage shutdown (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
43.6 V
Charged battery detection
56 V
Max. efficiency
86 %
Zero-load consumption
8 W
ECO mode power limit
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
10 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
2.7 kg
Dimensions (h × w × d)
86 × 165 × 260 mm
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
48 V
Item number
PIN481251200
Download datasheet (PDF)
Victron Sun Inverter 24/250-10 IEC – pure sine wave inverter for 230V mains powerThe Victron Sun Inverter 24/250-10 IEC is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the electrical grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Benefits
Pure sine wave: Provides the same power quality as the electrical grid, so sensitive electronics, motors, and pumps run without issues.
Up to 88% efficiency: More of the battery's energy ends up as usable 230V power.
Low idle consumption (5.2 W): Can remain on without draining the battery unnecessarily.
Applications
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Continuous power at 25 °C
250 VA
Continuous power at 40 °C
175 W
Peak power
400 W
AC output voltage
230 Vac +/- 3 %
AC output frequency
50 Hz or 60 Hz +/- 0.1 %
DC input voltage range
18.4 - 34.0 Vdc
Low battery voltage shut down (adjustable)
18.6 Vdc
Low battery voltage restart & alarm (adjustable)
21.8 Vdc
Battery charged detection voltage (adjustable)
28.0 Vdc
Max. efficiency
88 %
Zero-load consumption
5.2 W
Zero-load consumption in ECO mode
1.3 W
Power limit for ECO mode
adjustable via VictronConnect app
Technology
Pulse Width Modulation (PWM)
Max. PV array voltage
50 Vdc
Max. PV array current
10 A
Max. PV array power
500 W
Solar panel type
72 cell solar panel or two 36 cell solar panels in series
PV array voltage to initiate battery charging
voltage that is higher than battery voltage
Charging voltages
adjustable via VictronConnect app
Temperature-compensated charging
Yes, via an optional temperature sensor
Protection
a – f
Operating temperature range
(derate 1.25 % per °C above 40 °C)
Humidity
max. 95 %
Bluetooth
for remote monitoring and system integration
VE.Direct port
for remote monitoring and system integration
Material
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross section
10 mm² or AWG
PV connection terminals
screw terminals
Max. PV cable cross section
4 mm² or AWG 12
AC output sockets
IEC-320 (male plug included)
Protection class
IP 21
Weight
2.4 kg / 5.3 lbs
Dimensions (h × w × d)
3.4 × 6.5 × 10.2 inch
Remote on/off
Yes, can be used for remotely turning unit on/off, or for battery temperature sensing.
Battery temperature sensor
Use Temperature sensor QUA PMP GX Device or a Smart Battery Sense.
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1 / EN/IEC 62109-1
EMC
IEC 61000-6-1 / IEC 61000-6-3
Automotive directive
ECE R10-4 EN 50498
Nominal voltage
24 V
Item number
SIN241251100
Download datasheet (PDF)
Victron Phoenix Inverter 48V/500W/220V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 48V/500W/220V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Low idle consumption (10 W): Can remain switched on without draining the battery unnecessarily.
Input voltage 36.8 - 62 V: Operates stably across the entire voltage range of the battery.
Application
230V power for refrigerators, coffee machines, and tools in campers and vans.
Boats that require mains power without shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 1501X10
Continuous power at 25 °C
450 W
Continuous power at 40 °C
380 W
Time-limited power (cold start)
500 W/1h
Peak power
750 W/3s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
36.8 - 62 V
Low battery voltage disconnect
37.2 V
Dynamic low voltage disconnect (load-dependent)
Yes, see Dynamic cut off chapter.
Restart and alarm for low battery voltage
43.6 V
Charged battery detection
56 V
Max. efficiency
88 %
Zero-load consumption
10 W
Power limit for ECO mode
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power reduction
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
10 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
3.5 kg
Dimensions (h × w × d)
86 × 172 × 275
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
48 V
Part number
PIN481501200
Download datasheet (PDF)
Victron Phoenix Inverter 24V/800W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 24V/800W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run without issues.
Low idle consumption (8 W): Can be left on without unnecessarily draining the battery.
Input voltage 18.4 - 34 V: Operates stably across the entire battery voltage range.
Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats that require mains power without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 1801X10
Continuous power at 25 °C
800 W
Continuous power at 40 °C
650 W
Time-limited power (cold start)
900 W/1h
Peak power
1200 W/15s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
18.4 - 34 V
Low battery voltage disconnect
18.6 V
Dynamic low voltage disconnect (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
21.8 V
Charged battery detection
28 V
Max. efficiency
90 %
Zero-load consumption
8 W
Power threshold for ECO mode
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
16 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
5.5 kg
Dimensions (h × w × d)
105 × 216 × 310
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax × 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
24 V
Part number
PIN241801200
Download datasheet (PDF)
Victron Phoenix Inverter 48V/375W/220V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 48V/375W/220V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Low no-load consumption (9 W): Can be left on without unnecessarily draining the battery.
Input voltage 36.8 - 62 V: Operates stably throughout the battery's entire voltage range.
Application
230V power for refrigerators, coffee makers, and power tools in campers and vans.
Boats that need mains power without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 1371X10
Continuous power at 25 °C
375 W
Continuous power at 40 °C
300 W
Time-limited power (cold start)
450 W/10s
Peak power
600 W/2s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
36.8 - 62 V
Low battery voltage shutdown
37.2 V
Dynamic low voltage shutdown (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage alarm and restart
43.6 V
Charged battery detection
56 V
Max. efficiency
88 %
No-load consumption
9 W
Power limit for ECO mode
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
10 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
3 kg
Dimensions (h × w × d)
86 × 165 × 260
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
48 V
Part number
PIN481371200
Download datasheet (PDF)
Victron Phoenix Inverter 24V/500W/220V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 24V/500W/220V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same quality as the mains grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains grid, ensuring that sensitive electronics, motors, and pumps run without issues.
Low standby consumption (8 W): Can be left on without draining the battery unnecessarily.
Input voltage 18.4 - 34 V: Operates stably across the entire battery voltage range.
Applications
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats, where mains power is needed without a shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Item number
PINx × 1501X10
Continuous power at 25 °C
450 W
Continuous power at 40 °C
380 W
Peak power (cold start)
500 W/1h
Surge power
750 W/3s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
18.4 - 34 V
Low battery voltage disconnect
18.6 V
Dynamic low voltage disconnect (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
21.8 V
Battery charged detection
28 V
Max. efficiency
88 %
Zero-load consumption
8 W
ECO mode power limit
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
10 mm²
AC output sockets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
3.5 kg
Dimensions (h × w × d)
86 × 172 × 275
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
24 V
Item number
PIN241501200
Download datasheet (PDF)
Victron Phoenix Inverter 24V/250W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 24V/250W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains, ensuring sensitive electronics, motors, and pumps run without issues.
Low standby consumption (6 W): Can be left on without unnecessarily draining the battery.
Input voltage 18.4 - 34 V: Operates stably throughout the battery's voltage range.
Applications
230V power for refrigerators, coffee machines, and tools in campers and vans.
Boats, where mains power is needed without shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 1251X10
Continuous power at 25 °C
250 W
Continuous power at 40 °C
200 W
Time-limited power (cold start)
300 W/15s
Peak power
400 W/2s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
18.4 - 34 V
Low battery voltage disconnect
18.6 V
Dynamic low voltage disconnect (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
21.8 V
Charged battery detection
28 V
Max. efficiency
86 %
Zero-load consumption
6 W
Power limit for ECO mode
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
10 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
2.7 kg
Dimensions (h × w × d)
86 × 165 × 260
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
24 V
Part number
PIN241251200
Download datasheet (PDF)
Victron Phoenix Inverter 24V/375W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 24V/375W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same quality as the mains grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains grid, ensuring that sensitive electronics, motors, and pumps run without issues.
Low idle consumption (7 W): Can remain switched on without unnecessarily draining the battery.
Input voltage 18.4 - 34 V: Operates stably across the entire battery voltage range.
Applications
230V power for refrigerators, coffee machines, and tools in campers and vans.
Boats requiring mains power without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 1371X10
Continuous power at 25 °C
375 W
Continuous power at 40 °C
300 W
Timed power (cold start)
450 W/10s
Peak power
600 W/2s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
18.4 - 34 V
Low battery voltage disconnection
18.6 V
Dynamic low voltage disconnection (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
21.8 V
Charged battery detection
28 V
Max. efficiency
88 %
No-load consumption
7 W
ECO mode power limit
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
10 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
3 kg
Dimensions (h × w × d)
86 × 165 × 260
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
24 V
Part number
PIN241371200
Download datasheet (PDF)
Victron Phoenix Inverter 12V/500W Schuko – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 12V/500W Schuko is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the electrical grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Benefits
Pure sine wave: Provides the same power quality as the electrical grid, ensuring that sensitive electronics, motors, and pumps run without issues.
Low idle consumption (7 W): Can be left on without unnecessarily draining the battery.
Input voltage 9.2 - 17 V: Works stably throughout the entire battery voltage range.
Application
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 1501X10
Continuous power at 25 °C
450 W
Continuous power at 40 °C
380 W
Time-limited power (cold start)
500 W/1h
Peak power
750 W/3s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
9.2 - 17 V
Low battery voltage disconnect
9.3 V
Dynamic low voltage disconnect (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
10.9 V
Charged battery detection
14.0 V
Max. efficiency
86 %
Zero-load consumption
7 W
ECO mode power limit
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max . battery cable cross-section
10 mm²
AC output sockets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
3.5 kg
Dimensions (h × w × d)
86 × 172 × 275
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
12 V
Part number
PIN121501200
Download datasheet (PDF)
Victron Phoenix Inverter 12V/375W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 12V/375W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same quality as the mains grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains grid, ensuring sensitive electronics, motors, and pumps run without issues.
Low no-load consumption (6 W): Can be left on without unnecessarily draining the battery.
Input voltage 9.2 - 17 V: Operates stably across the entire battery voltage range.
Applications
230V power for refrigerators, coffee makers, and power tools in campers and vans.
Boats requiring mains power without a shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 1371X10
Continuous power at 25 °C
375 W
Continuous power at 40 °C
300 W
Peak power (cold start)
450 W/10s
Surge power
600 W/2s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
9.2 - 17 V
Low battery voltage cut-off
9.3 V
Dynamic low voltage cut-off (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
10.9 V
Battery charged detection
14.0 V
Max. efficiency
86 %
Zero-load consumption
6 W
ECO mode power threshold
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
10 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
3 kg
Dimensions (h × w × d)
86 × 165 × 260
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000- 6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
12 V
Part number
PIN121371200
Download datasheet (PDF)
Victron Phoenix Inverter 12V/800W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 12V/800W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the electrical grid, so sensitive electronics, motors, and pumps run without issues.
Low standby consumption (8 W): Can be left on without unnecessary battery drainage.
Input voltage 9.2 - 17 V: Operates stably throughout the battery's entire voltage range.
Applications
230V power for refrigerators, coffee machines, and power tools in campers and vans.
Boats that need mains power without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Item number
PINx × 1801X10
Continuous power at 25 °C
800 W
Continuous power at 40 °C
650 W
Peak power (cold start)
900 W/1h
Surge power
1200 W/15s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
9.2 - 17 V
Low battery voltage disconnect
9.3 V
Dynamic low voltage disconnect (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
10.9 V
Battery charged detection
14.0 V
Max. efficiency
90 %
Zero-load consumption
8 W
ECO mode power limit
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
25 mm²
AC sockets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
5.5 kg
Dimensions (h × w × d)
95 × 231 × 334
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
12 V
Item number
PIN121801200
Download datasheet (PDF)
Victron Phoenix Inverter 12V/250W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 12V/250W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the mains grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains grid, so sensitive electronics, motors, and pumps run without issues.
Low no-load consumption (5 W): Can be left on without unnecessarily draining the battery.
Input voltage 9.2 - 17 V: Operates stably across the entire battery voltage range.
Applications
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 1251X10
Continuous power at 25 °C
250 W
Continuous power at 40 °C
200 W
Timed power (cold start)
300 W/15s
Peak power
400 W/2s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
9.2 - 17 V
Low battery voltage disconnect
9.3 V
Dynamic low voltage disconnect (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
10.9 V
Battery charged detection
14.0 V
Max. efficiency
84 %
Zero-load consumption
5 W
ECO mode power threshold
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
10 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
2.7 kg
Dimensions (h × w × d)
86 × 165 × 260
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
12 V
Part number
PIN121251200
Download datasheet (PDF)
Victron Phoenix Inverter 12V/1600W/230V VE.Direct Schuko – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 12V/1600W/230V VE.Direct Schuko is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Low no-load consumption (14 W): Can remain switched on without unnecessarily draining the battery.
Input voltage 9.2 - 17 V: Works stably throughout the entire voltage range of the battery.
Applications
230V power for refrigerators, coffee makers, and power tools in motorhomes and vans.
Boats where mains power is needed without a shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 2161X00
Continuous power at 25 °C
1450 W
Continuous power at 40 °C
1300 W
Peak power (cold start)
1600 W/1h
Surge power
2100 W/15s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
9.2 - 17 V
Low battery voltage shutdown
9.3 V
Dynamic low voltage shutdown (load dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
10.9 V
Charged battery detection
14.0 V
Max. efficiency
91 %
Zero-load consumption
14 W
Power threshold for ECO mode
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
50 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
8.9 kg
Dimensions (h × w × d)
117 × 231 × 395
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Nominal voltage
12 V
Part number
PIN122161200
Download datasheet (PDF)
Victron Inverter 48/800 VE.Direct Schuko – pure sine wave inverter for 230V mains powerThe Victron Inverter 48/800 VE.Direct Schuko is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same quality as the electrical grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Benefits
Pure sine wave: Provides the same power quality as the electrical grid, ensuring that sensitive electronics, motors, and pumps run without issues.
Low standby consumption (9 W): Can remain on without unnecessarily draining the battery.
Input voltage 36.8 - 62 V: Operates stably throughout the battery's entire voltage range.
Applications
230V power for refrigerators, coffee machines, and tools in motorhomes and vans.
Boats that need mains power without shore connection.
Emergency power in summer cottages and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 1801X10
Continuous power at 25 °C
800 W
Continuous power at 40 °C
650 W
Timed power (cold start)
900 W/1h
Peak power
1200 W/15s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
36.8 - 62 V
Low battery voltage shutdown
37.2 V
Dynamic low voltage shutdown (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
43.6 V
Charged battery detection
56 V
Max. efficiency
91 %
Zero-load consumption
9 W
Power limit for ECO mode
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue Ral 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
16 mm²
AC output sockets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
5.5 kg
Dimensions (h × w × d)
105 × 216 × 310
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax × 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Part number
PIN481801200
Victron VE.Direct to RS232 Interface – original Victron accessoryThe Victron VE.Direct to RS232 Interface is an original accessory from Victron Energy. It integrates directly into the Victron system and is built to last in demanding marine and vehicle environments.Benefits
Original Victron accessory: Fits directly into the Victron system without any adjustments.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Motorhomes, boats, summer houses, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Weight
0.058 kg
Dimensions (h × w × d)
10 × 20 × 2 mm
Item number
ASS030520500
Victron VE.Direct TX Digital output cable – original Victron accessoryThe Victron VE.Direct TX Digital output cable is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits the Victron system directly without any modifications.
Reliable quality: Materials and workmanship that endure marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Motorhomes, boats, summer houses, and off-grid systems.
Safe and stable installation.
Specifications
Specification
Details
Weight
0.055 kg
Item number
ASS030550500
Victron VE.Can RJ45 Terminator (2 Pcs.) – original Victron accessoryThe Victron VE.Can RJ45 Terminator (2 Pcs.) is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Benefits
Original Victron accessory: Fits the Victron system directly without any adjustments.
Reliable quality: Materials and craftsmanship that last in marine and vehicle environments.
Applications
Original accessory that fits directly into the Victron system.
Motorhome, boat, holiday home, and off-grid installations.
Secure and operationally stable installation.
Specifications
Specification
Details
Weight
0.009 kg
Dimensions (h × w × d)
10 × 15 × 1 mm
Part number
ASS030700000
Victron RS232 to USB converter – original Victron accessoryThe Victron RS232 to USB converter is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits the Victron system directly without any adaptation.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits the Victron system directly.
Motorhome, boat, summer cottage, and off-grid systems.
Safe and stable installation.
Specifications
Specification
Details
Weight
0.1 kg
Dimensions (h × w × d)
14 × 23 × 3 mm
Item number
ASS030200000
Victron VE.Can to NMEA2000 Micro-C male – original Victron accessoryThe Victron VE.Can to NMEA2000 Micro-C male is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits directly into the Victron system without the need for adaptation.
Reliable quality: Materials and workmanship that endure in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Motorhomes, boats, summer houses, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Weight
0.06 kg
Part number
ASS030520200
Victron RS485 to USB interface cable 1.8 m – original Victron accessoryThe Victron RS485 to USB interface cable 1.8 m is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Benefits
Original Victron accessory: Fits the Victron system directly without modification.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits the Victron system directly.
Motorhome, boat, holiday home, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Part number
ASS030572018
Victron RS485 to USB interface cable 5 m – original Victron accessoryThe Victron RS485 to USB interface cable 5 m is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Benefits
Original Victron accessory: Fits the Victron system directly without any adjustments.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits the Victron system directly.
Motorhome, boat, summer cottage, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Weight
0.2 kg
Item number
ASS030572050
Victron Remote on/off cable MPPT VE.Direct – original Victron accessoryThe Victron Remote on/off cable MPPT VE.Direct is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Benefits
Original Victron accessory: Fits directly into the Victron system without modification.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Camper van, boat, holiday home, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Weight
0.12 kg
Dimensions (h × w × d)
21 × 23 × 1 mm
Item number
ASS030550320
Victron Non-inverting remote on-off cable – original Victron accessoryThe Victron Non-inverting remote on-off cable is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits the Victron system directly without modification.
Reliable quality: Materials and workmanship that endure in marine and vehicle environments.
Application
Original accessory that fits the Victron system directly.
Motorhomes, boats, summer cottages, and off-grid installations.
Safe and reliable installation.
Specifications
Specification
Details
Part number
ASS030550220
Victron Inverter Remote On/Off Cable – original Victron accessoryThe Victron Inverter Remote On/Off Cable is an original accessory from Victron Energy. It integrates directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits the Victron system directly without any modifications.
Reliable quality: Materials and craftsmanship built to last in marine and vehicle environments.
Application
Original accessory that fits the Victron system directly.
Camper van, boat, holiday home, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Weight
0.014 kg
Dimensions (h × w × d)
10 × 17 × 1 mm
Item number
ASS030550120
Victron Pre-charge cable – original Victron accessoryThe Victron Pre-charge cable is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits directly into the Victron system without modification.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Camper van, boat, summer house, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Weight
0.08 kg
Dimensions (h × w × d)
1 × 17 × 17 mm
Item number
ASS070400100
Victron Interface MK3-USB (VE.Bus to USB) – original Victron accessoryThe Victron Interface MK3-USB (VE.Bus to USB) is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits the Victron system directly without modification.
Reliable quality: Materials and workmanship that withstand marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Motorhome, boat, holiday home, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Weight
0.09 kg
Part number
ASS030140000
Victron Cable CAN-bus BMS Type B 1.8 m – original Victron accessoryThe Victron Cable CAN-bus BMS Type B 1.8 m is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits the Victron system directly without modification.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits the Victron system directly.
Camper van, boat, holiday home, and off-grid systems.
Safe and operationally stable installation.
Specifications
Specification
Details
Weight
0.08 kg
Dimensions (h × w × d)
17 × 18 × 2 mm
Item number
ASS030720118
Victron Cable CAN-bus Type A 5 m – original Victron accessoryThe Victron Cable CAN-bus Type A 5 m is an original accessory from Victron Energy. It integrates directly into the Victron system and is built to withstand demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits directly into the Victron system without modification.
Reliable quality: Materials and workmanship designed to last in marine and vehicle environments.
Applications
Original accessory that fits directly into the Victron system.
Camper vans, boats, holiday homes, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Weight
0.225 kg
Dimensions (h × w × d)
13 × 25 × 3 mm
Item number
ASS030710150
Victron Cable CAN-bus Type B 5 m – original Victron accessoryThe Victron Cable CAN-bus Type B 5 m is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits the Victron system directly without modification.
Reliable quality: Materials and workmanship that endure in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Motorhome, boat, summer cottage, and off-grid installations.
Safe and reliable installation.
Specifications
Specification
Details
Weight
0.225 kg
Part number
ASS030720150
Victron Interface MK2-USB for Phoenix Charger – original Victron accessoryThe Victron Interface MK2-USB for Phoenix Charger is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Benefits
Original Victron accessory: Fits the Victron system directly without any adjustments.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits the Victron system directly.
Camper van, boat, summer house, and off-grid installations.
Safe and reliable installation.
Specifications
Specification
Details
Weight
0.07 kg
Item number
ASS030130010
Victron Cable CAN-bus Type A 1.8m – original Victron accessoryThe Victron Cable CAN-bus Type A 1.8m is an original accessory from Victron Energy. It integrates directly into the Victron system and is built to withstand demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits directly into the Victron system without modification.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Camper van, boat, holiday home, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Part number
ASS030710118
Victron Interface MK3-USB-C (VE.Bus to USB-C) – original Victron accessoryThe Victron Interface MK3-USB-C (VE.Bus to USB-C) is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Benefits
Original Victron accessory: Fits the Victron system directly without any modifications.
Reliable quality: Materials and workmanship that endure in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Camper van, boat, holiday home, and off-grid systems.
Safe and operationally stable installation.
Specifications
Specification
Details
Weight
0.09 kg
Dimensions (h × w × d)
8 × 11 × 3 mm
Item number
ASS030140030
Victron Interface MK2.2b (VE.Bus to RS232) – original Victron accessoryThe Victron Interface MK2.2b (VE.Bus to RS232) is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits directly into the Victron system without modification.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Motorhome, boat, summer house, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Weight
0.05 kg
Dimensions (h × w × d)
5 × 9 × 3 mm
Item number
ASS030120210
Victron Splitter cable 16A/250V 2xCEE – original Victron accessoryThe Victron Splitter cable 16A/250V 2xCEE is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits directly into the Victron system without modification.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Motorhome, boat, holiday home, and off-grid installations.
Safe and reliable installation.
Specifications
Specification
Details
Weight
0.7 kg
Part number
SHP307700240
Victron CANUSB Interface – original Victron accessoryThe Victron CANUSB Interface is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits directly into the Victron system without modification.
Reliable quality: Materials and construction that last in marine and vehicle environments.
Applications
Original accessory that fits directly into the Victron system.
Motorhome, boat, holiday home, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Weight
0.07 kg
Dimensions (h × w × d)
13 × 17 × 4 mm
Part number
ASS030532010
Victron Power Inlet 32A stainless steel – original Victron accessoryThe Victron Power Inlet 32A stainless steel is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits directly into the Victron system without modification.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Camper van, boat, summer house, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Weight
0.75 kg
Item number
SHP303202000
Victron Power Inlet 16A stainless steel – original Victron accessoryThe Victron Power Inlet 16A stainless steel is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits directly into the Victron system without modification.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Motorhome, boat, holiday home, and off-grid installations.
Safe and reliable installation.
Specifications
Specification
Details
Weight
0.44 kg
Item number
SHP301602000
Victron Shore Power Cable 25 m 16A – original Victron accessoryThe Victron Shore Power Cable 25 m 16A is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Benefits
Original Victron accessory: Fits directly into the Victron system without modification.
Reliable quality: Materials and craftsmanship that endure marine and vehicle environments.
Applications
Original accessory that fits directly into the Victron system.
Motorhomes, boats, holiday homes, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Weight
2.76 kg
Item number
SHP302502500
Victron Power Inlet 16A/250V – original Victron accessoryThe Victron Power Inlet 16A/250V is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Benefits
Original Victron accessory: Fits directly into the Victron system without modification.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Motorhomes, boats, holiday homes, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Weight
0.44 kg
Part number
SHP301603000
Victron Shore Power Cable 25 m 32A – original Victron accessoryThe Victron Shore Power Cable 25 m 32A is an original accessory from Victron Energy. It integrates directly into the Victron system and is built to last in demanding marine and vehicle environments.Benefits
Original Victron accessory: Fits directly into the Victron system without the need for modifications.
Reliable quality: Materials and construction designed to withstand marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Motorhome, boat, summer house, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Weight
10.6 kg
Part number
SHP306002500
Victron Plug 32A/250 VAC – original Victron accessoryThe Victron Plug 32A/250 VAC is an original accessory from Victron Energy. It integrates directly into the Victron system and is built to withstand demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits directly into the Victron system without modification.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Motorhome, boat, holiday home, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Part number
SHP303204000
Victron Adapter cable 32A/250V 3-phase – original Victron accessoryThe Victron Adapter cable 32A/250V 3-phase is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits the Victron system directly without modification.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits the Victron system directly.
Motorhome, boat, holiday home, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Part number
SHP307700300
Victron Shore Power Cable 15 m 25A – original Victron accessoryThe Victron Shore Power Cable 15 m 25A is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Benefits
Original Victron accessory: Fits directly into the Victron system without modification.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Motorhomes, boats, summer houses, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Weight
4.1 kg
Item number
SHP304001500
Victron Shore Power Cable 15 m 16A – original Victron accessoryThe Victron Shore Power Cable 15 m 16A is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Benefits
Original Victron accessory: Fits directly into the Victron system without the need for modifications.
Reliable quality: Materials and workmanship built to last in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Motorhomes, boats, summer houses, and off-grid systems.
Safe and stable installation.
Specifications
Specification
Details
Part number
SHP302501500
