See our full range of LiFePO4 batteries, Victron and Deye products, chargers, inverters, solar panels, BMS and accessories.
All products
Anvendelse
Spænding
Kapacitet
Viser 0 batterier
Ingen batterier matcher dit valg. Prøv at fjerne et filter – eller lad batteriguiden finde det rigtige.
-
Victron Victron Argodiode 160-2AC 2 BAT 160A
Victron Argodiode 160-2AC 2 BAT 160A – battery isolator for charging two battery banksThe Victron Argodiode 160-2AC 2 BAT 160A is a battery isolator from Victron Energy that charges two battery banks from a single source. The banks are connected automatically during charging and separated again afterwards, ensuring the starter battery is never drained by consumption.Advantages Automatic separation: Connects battery banks during charging and separates them again when charging stops. Protects the starter battery: Power consumption cannot drain the starter battery, so the engine can always be started. Simple installation: No programming required — the unit operates automatically based on voltage. Applications Charging a starter battery and a service battery from the same source. Motorhomes and boats with two or more battery banks. Simple installation without programming. Specifications Specification Details Rated voltage 6/12/24 V Weight 1.3 kg Dimensions (h × w × d) 150 × 120 × 60 mm Item number ARG160201020 Download datasheet (PDF)
$117.00
-
Victron Victron Lynx Smart BMS 500 NG (M10)
Victron Lynx Smart BMS 500 NG (M10) – Battery management system for lithium batteriesThe Victron Lynx Smart BMS 500 NG (M10) is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Benefits Protects cells: Disconnects charging and discharging in case of excessively high or low cell voltage. Controls the entire system: Sends a signal to the inverter, charger, and MPPT so they react before the battery is damaged. For Victron LiFePO4: Designed for Victron Smart Lithium batteries and their cell balancing. Bluetooth built-in: View cell voltages and status in the VictronConnect app. Application Protection of Victron LiFePO4 batteries against over- and undervoltage. Lithium systems with inverter, charger, and MPPT from Victron. Safe operation of lithium banks in boats and motorhomes. Specifications Specification Details Supply voltage range 9 – 60Vdc Supported system voltages 12, 24, or 48V Reverse polarity protection No Main safety contactor continuous current rating 500 A continuous Main safety contactor peak current rating 600 A for 5 minutes Power consumption OFF state 0.3 mA for all system voltages Power consumption in Standby state Approximately 0.6 W (50 mA at 12V) Power consumption in ON state Approximately 2.6 W (217 mA at 12V) depending on state of relays Min. load resistance for pre-charging 10Ω and above for 12V systems / 20Ω and above for 24V and 48V systems AUX output max. current rating 1.1 A continuous, protected by resettable fuse Allow-to-charge port max. current rating 0.5 A at 60Vdc, protected by resettable fuse Allow-to-discharge port max. current rating 0.5 A at 60Vdc, protected by resettable fuse Programmable relay (SPDT) max. current rating 2 A at 60Vdc Weight 2.2 kg Technology LITHIUM Dimensions (h × w × d) 80 × 186 × 170 mm Item number LYN034160310 Download datasheet (PDF)
$1,040.00
-
Victron Victron Argodiode 140-3AC 3 BAT 140A
Victron Argodiode 140-3AC 3 BAT 140A – battery isolator for charging two battery banksThe Victron Argodiode 140-3AC 3 BAT 140A is a battery isolator from Victron Energy that allows charging of two battery banks from a single source. The banks are automatically connected during charging and separated again afterwards, ensuring the starter battery is never drained by the load.Advantages Automatic separation: Connects the battery banks during charging and separates them again when charging stops. Protects the starter battery: The load cannot drain the starter battery, so the engine can always be started. Simple installation: No programming — the unit operates independently based on voltage. Applications Charging a starter battery and a service battery from the same source. Camper vans and boats with two or more battery banks. Simple installation without programming. Specifications Specification Details Nominal voltage 6/12/24 V Weight 1.1 kg Dimensions (h × w × d) 150 × 120 × 60 mm Part number ARG140301020R Download datasheet (PDF)
$120.00
-
Victron Victron Argodiode 180-3AC 3 BAT 180A
Victron Argodiode 180-3AC 3 BAT 180A – battery isolator for charging three battery banksThe Victron Argodiode 180-3AC 3 BAT 180A is a battery isolator from Victron Energy that allows for charging three battery banks from a single source. The banks are automatically connected during charging and separated again afterwards, ensuring the starter battery is never drained by power consumption.Advantages Automatic separation: Connects the battery banks during charging and separates them when charging stops. Protects the starter battery: Power consumption cannot drain the starter battery, so the engine can always be started. Simple installation: No programming required — the unit operates independently based on voltage. Applications Charging a starter battery and auxiliary batteries from the same source. Camper vans and boats with two or more battery banks. Simple installation without programming. Specifications Specification Details Rated voltage 6/12/24 V Weight 1.6 kg Dimensions (h × w × d) 200 × 120 × 60 mm Part number ARG180301020 Download datasheet (PDF)
$137.00
-
Victron Victron Argodiode 120-2AC 2 BAT 120A
Victron Argodiode 120-2AC 2 BAT 120A – battery isolator for charging two battery banksThe Victron Argodiode 120-2AC 2 BAT 120A is a battery isolator from Victron Energy that charges two battery banks from the same source. The banks are automatically connected during charging and separated again afterwards, so that the starter battery is never drained by the power consumption.Advantages Automatic separation: Connects the battery banks during charging and separates them again when charging stops. Protects the starter battery: Power consumption cannot drain the starter battery, so the engine can always be started. Simple installation: No programming required — the unit operates automatically based on voltage. Application Charging a starter battery and a service battery from the same source. Camper vans and boats with two or more battery banks. Simple installation without programming. Specifications Specification Details Nominal voltage 6/12/24 V Weight 1 kg Dimensions (h × w × d) 115 × 120 × 60 mm Part number ARG120201020R Download datasheet (PDF)
$97.00
-
Victron Victron Argodiode 100-3AC 3 BAT 100A
Victron Argodiode 100-3AC 3 BAT 100A – battery isolator for charging two battery banksThe Victron Argodiode 100-3AC 3 BAT 100A is a battery isolator from Victron Energy that allows charging two battery banks from a single source. The banks are automatically connected during charging and separated again afterwards, ensuring the starter battery is never drained by the load.Advantages Automatic splitting: Connects the battery banks during charging and disconnects them when charging stops. Protects the starter battery: The load cannot drain the starter battery, ensuring the engine can always be started. Simple installation: No programming required — the unit operates independently based on voltage. Applications Charging a starter battery and a service battery from the same source. Camper vans and boats with two or more battery banks. Simple installation without programming. Specifications Specification Details Nominal voltage 6/12/24 V Weight 1 kg Dimensions (h × w × d) 115 × 120 × 60 mm Item number ARG100301000R Download datasheet (PDF)
$88.00
-
Victron Victron Lynx Smart BMS 500 (M10)
Victron Lynx Smart BMS 500 (M10) – battery management system for lithium batteriesThe Victron Lynx Smart BMS 500 (M10) is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages Protects the cells: Disconnects charging and consumption in case of excessively high or low cell voltage. Controls the entire system: Sends a signal to the inverter, charger, and MPPT so they react before the battery is damaged. For Victron LiFePO4: Designed for Victron Smart Lithium batteries and their cell balancing. Built-in Bluetooth: View cell voltages and status in the VictronConnect app. Application Protection of Victron LiFePO4 batteries against over- and undervoltage. Lithium systems with inverter, charger, and MPPT from Victron. Safe operation of lithium banks in boats and motorhomes. Specifications Specification Details Supply voltage range 9 – 60Vdc Supported system voltages 12, 24, or 48V Reverse polarity protection No Main safety contactor continuous current rating 500 A continuous Main safety contactor peak current rating 600 A for 5 minutes Power consumption OFF state 0.3 mA for all system voltages Power consumption in Standby state Approximately 0.6 W (50 mA at 12V) Power consumption in ON state Approximately 2.6 W (217 mA at 12V) depending on state of relays Min. load resistance for pre-charge 10Ω and above for 12V systems / 20Ω and above for 24V and 48V systems AUX output max. current rating 1.1 A continuous, protected by resettable fuse Allow-to-charge port max. current rating 0.5 A at 60Vdc, protected by resettable fuse Allow-to-discharge port max. current rating 0.5 A at 60Vdc, protected by resettable fuse Programmable relay (SPDT) max. current rating 2 A at 60Vdc Weight 2.2 kg Technology LITHIUM Dimensions (h × w × d) 80 × 186 × 170 mm Item number LYN034160210 Download datasheet (PDF)
$948.00
-
Victron Victron Lynx Smart BMS 1000 NG (M10)
Victron Lynx Smart BMS 1000 NG (M10) – battery management system for lithium batteriesThe Victron Lynx Smart BMS 1000 NG (M10) is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages Protects the cells: Disconnects charging and consumption in the event of too high or too low cell voltage. Controls the entire system: Sends a signal to the inverter, charger, and MPPT so they react before the battery is damaged. For Victron LiFePO4: Designed for Victron Smart Lithium batteries and their cell balancing. Bluetooth built-in: View cell voltages and status in the VictronConnect app. Application Protection of Victron LiFePO4 batteries against over- and undervoltage. Lithium systems with inverters, chargers, and MPPT from Victron. Safe operation of lithium banks in boats and motorhomes. Specifications Specification Details Supply voltage range 9 – 60Vdc Supported system voltages 12, 24, or 48V Reverse polarity protection No Main safety contactor continuous current rating 500 A continuous Main safety contactor peak current rating 600 A for 5 minutes Power consumption OFF state 0.3 mA for all system voltages Power consumption in Standby state Approximately 0.6 W (50 mA at 12V) Power consumption in ON state Approximately 2.6 W (217 mA at 12V) depending on state of relays Min. consumption resistance for pre-charging 10Ω and above for 12V systems / 20Ω and above for 24V and 48V systems AUX output max. current rating 1.1 A continuous, protected by resettable fuse Allow-to-charge port max. current rating 0.5 A at 60Vdc, protected by resettable fuse Allow-to-discharge port max. current rating 0.5 A at 60Vdc, protected by resettable fuse Programmable relay (SPDT) max. current rating 2 A at 60Vdc Weight 1.4 kg Technology LITHIUM Dimensions (h × w × d) 80 × 186 × 170 mm Item number LYN034170310 Download datasheet (PDF)
$1,346.00
-
Victron Victron Lynx Smart BMS 500 (M8)
Victron Lynx Smart BMS 500 (M8) – Battery Management System for lithium batteriesThe Victron Lynx Smart BMS 500 (M8) is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages Protects the cells: Disconnects charging and consumption in the event of high or low cell voltage. Controls the entire system: Sends a signal to the inverter, charger, and MPPT so they react before the battery is damaged. For Victron LiFePO4: Designed for Victron Smart Lithium batteries and their cell balancing. Bluetooth built-in: View cell voltages and status in the VictronConnect app. Applications Protection of Victron LiFePO4 batteries against over- and under-voltage. Lithium systems with inverter, charger, and MPPT from Victron. Safe operation of lithium banks in boats and motorhomes. Specifications Specification Details Supply voltage range 9 – 60Vdc Supported system voltages 12, 24, or 48V Reverse polarity protection No Main safety contactor continuous current rating 500 A continuous Main safety contactor peak current rating 600 A for 5 minutes Power consumption OFF state 0.3 mA for all system voltages Power consumption in Standby state Approximately 0.6 W (50 mA at 12V) Power consumption in ON state Approximately 2.6 W (217 mA at 12V) depending on state of relays Min. consumption resistance for pre-charging 10Ω and above for 12V systems / 20Ω and above for 24V and 48V systems AUX output max. current rating 1.1 A continuous, protected by resettable fuse Allow-to-charge port max. current rating 0.5 A at 60Vdc, protected by resettable fuse Allow-to-discharge port max. current rating 0.5 A at 60Vdc, protected by resettable fuse Programmable relay (SPDT) max. current rating 2 A at 60Vdc Weight 2.19 kg Technology LITHIUM Dimensions (h × w × d) 90 × 30 × 100 mm Item number LYN034160200 Download datasheet (PDF)
$770.00
-
Victron Victron Lynx Smart BMS 1000
Victron Lynx Smart BMS 1000 – battery management system for lithium batteriesThe Victron Lynx Smart BMS 1000 is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages Protects the cells: Disconnects charging and discharging in the event of over- or undervoltage in the cells. Controls the entire system: Sends signals to the inverter, charger, and MPPT so they react before the battery is damaged. For Victron LiFePO4: Designed for Victron Smart Lithium batteries and their cell balancing. Bluetooth built-in: View cell voltages and status in the VictronConnect app. Applications Protection of Victron LiFePO4 batteries against over- and undervoltage. Lithium systems with inverters, chargers, and MPPTs from Victron. Safe operation of lithium banks in boats and motorhomes. Specifications Specification Details Supply voltage range 9 – 60Vdc Supported system voltages 12, 24, or 48V Reverse polarity protection No Main safety contactor continuous current rating 500 A continuous Main safety contactor peak current rating 600 A for 5 minutes Power consumption OFF mode 0.3 mA for all system voltages Power consumption in Standby mode Approximately 0.6 W (50 mA at 12V) Power consumption in ON mode Approximately 2.6 W (217 mA at 12V) depending on state of relays Min. load resistance for pre-charge 10Ω and above for 12V systems / 20Ω and above for 24V and 48V systems AUX output max. current rating 1.1 A continuous, protected by resettable fuse Allow-to-charge port max. current rating 0.5 A at 60Vdc, protected by resettable fuse Allow-to-discharge port max. current rating 0.5 A at 60Vdc, protected by resettable fuse Programmable relay (SPDT) max. current rating 2 A at 60Vdc Weight 2.5 kg Technology LITHIUM Dimensions (h × w × d) 170 × 80 × 186 mm Item number LYN034170210 Download datasheet (PDF)
$1,263.00
-
Victron Victron Lynx Shunt VE.Can (M10)
Victron Lynx Shunt VE.Can (M10) – original Victron accessoryThe Victron Lynx Shunt VE.Can (M10) is an original accessory from Victron Energy. It integrates directly into the Victron system and is built to last in demanding marine and vehicle environments.Benefits Original Victron accessory: Fits the Victron system directly without any adjustments. Reliable quality: Materials and workmanship built to endure in marine and vehicle environments. Application Original accessory that fits the Victron system directly. Camper van, boat, summer cottage, and off-grid systems. Safe and operationally stable installation. Specifications Specification Details Supported system voltages 12, 24, or 48V Reverse polarity protection No Current rating 1000 Adc continuous Power consumption 60 mA @ 12V / 33 mA @ 24V / 20 mA @ 48V Potential free alarm contact 3 A, 30 Vdc, 250 Vac Supply voltage range 9 - 70 Vdc Busbar M10 Fuse or fuse dummy M8 (a Mega fuse can be installed on M6 bolts) VE.Can RJ45 and RJ45 terminator Power supply connection to Lynx Distributor RJ10 (a RJ10 cable ships with each Lynx Distributor) Temperature sensor terminal connector (sensor included) Relay screw terminal Enclosure material ABS Enclosure dimensions (hxwxd) 190 × 180 × 80 mm Unit weight 1.4 kg Busbar material Tinned copper Busbar dimensions (hxw) 8 × 30 mm Operating temperature range -40 °C to +60 °C Storage temperature -40 °C to +60 °C Humidity max. 95% (non-condensing) Protection class IP22 Dimensions (h × w × d) 80 × 186 × 170 mm Item number LYN040102110 Download datasheet (PDF)
$443.00
-
Victron Victron VE Transfer switch 5kVA/230V
Victron VE Transfer switch 5KVA/230V – automatic transfer switch between two AC sourcesThe Victron VE Transfer Switch 5 kVA is an automatic transfer switch with two AC inputs and one output. The loads are supplied from input 1 (e.g. shore power or a generator), and if this supply fails or goes outside the voltage or frequency limits, the switch automatically changes over to input 2 – typically an inverter. During the switchover itself, the power is briefly interrupted, so sensitive electronics such as computers may lose data.Benefits Automatic switching: Switches between the two sources without manual operation. Delayed switch-back: Once input 1 has been stable for approx. 10 seconds (adjustable), it switches back – this protects your equipment during short voltage dips. 20 A per input: Rated current of 20 A on both inputs and the output, and motor loads (e.g. air conditioning) of up to 1.3 kW. Auxiliary contact: Together with a MultiPlus and a Digital Multi Control, it can automatically switch the current limit to a preset generator value. Applications Switching between generator and shore power in boats or motorhomes. Switching between inverter and generator or shore power. Giving a MultiPlus access to two AC sources instead of one. Specifications Specification Details Nominal voltage 200–250 V AC, single-phase Nominal frequency 50–60 Hz Rated current, input 1 and 2 20 A Rated output current 20 A Max. motor load (e.g. air conditioning) 1.3 kW Self-consumption, input 1 6 VA Switching time, closing contacts 10–20 ms Switching time, opening contacts 5–20 ms Delay, input 1 Approx. 10 s (adjustable) Auxiliary contact 200–240 V AC, 20 A, cos φ = 1 Operating temperature range -5 to +60 °C Humidity Max. 95% (non-condensing) Circuit breaker (MCB) and residual current device (RCD) Not included – depends on the installation Enclosure rating IP54 Colour RAL 7035 Dimensions 175 × 215 × 120 mm Weight 1.85 kg Item number COS230502100 Download manual (PDF)
$368.00
-
Victron Victron Class-T Power In (M10)
Victron Class-T Power In (M10) – power distribution and fusingThe Victron Class-T Power In (M10) is a genuine Victron component for DC power distribution and fusing. It protects cables and components against overcurrent and makes the installation organized and easy to service.Benefits Secure fusing: Protects cables and components against overcurrent and short circuits. Organized installation: Consolidates distribution in one place, making the system easy to service. Genuine Victron quality: Fits directly into Lynx and Victron systems. Application Secure distribution and fusing of DC power. Camper vans, boats, and off-grid systems. Organized and service-friendly installation. Specifications Specification Details Rated voltage 6/12/24 V Weight 2.3 kg Dimensions (h × w × d) 170 × 97 × 280 mm Part number LYN060404010
$213.00
-
Victron Victron Isolation Transformer 4500W 115/230V
Victron Isolation transformer 4500W 115/230V – galvanic isolation of shore powerThe Victron Isolation transformer 4500W 115/230V from Victron Energy provides galvanic isolation between shore power and the onboard installation. It stops galvanic corrosion on the hull and makes the shore connection safe.Advantages Galvanic isolation: Breaks the connection to the harbor ground and stops galvanic corrosion on the hull. Safe shore power: Protects both the installation and people in case of faults in the harbor grid. Robust construction: Built for permanent operation in a humid environment. Application Shore power in boats, where galvanic corrosion must be avoided. Adjustment between different grid voltages. Safe separation of the vessel and the harbor grid. Specifications Specification Details AC input voltage 115 or 230 V AC output 120 or 240 V Frequency 50/60 Hz Output current rating 17 A (115 V) / 8.5 A (230 V) Soft start Yes Operating temperature range -20 °C to 40 °C Humidity max. 95%, non-condensing Transformer type Toroidal (low noise, low weight), 1:1.05 ratio Enclosure aluminium (blue RAL 5012) Protection class IP21 Safety EN 60076 Weight 12.7 kg Dimensions (h × w × d) 375 × 214 × 135 Item number ITR040452042 Download datasheet (PDF)
$749.00
-
Victron Victron Isolation Transformer 3600W 115/230V (ITR040362042)
Victron Isolation Transformer 3600W 115/230V – galvanic isolation of shore powerThe Victron Isolation Transformer 3600W 115/230V from Victron Energy provides galvanic isolation between shore power and the onboard installation. It stops galvanic corrosion on the hull and makes the shore connection safe.Advantages Galvanic isolation: Breaks the connection to the harbor's ground and stops galvanic corrosion on the hull. Safe shore power: Protects both the system and personnel in case of faults in the harbor's grid. Robust construction: Built for continuous operation in a humid environment. Application Shore power in boats where galvanic corrosion must be avoided. Adjustment between different grid voltages. Safe separation of the vessel and the harbor grid. Specifications Specification Details AC input voltage 115 or 230 V AC output 120 or 240 V Frequency 50/60 Hz Output current rating 17 A (115 V) / 8.5 A (230 V) Soft start Yes Operating temperature range -20 °C to 40 °C Humidity max. 95%, non-condensing Transformer type Toroidal (low noise, low weight), 1:1.05 ratio Enclosure aluminum (blue RAL 5012) Protection class IP21 Safety EN 60076 Weight 12.7 kg Dimensions (h × w × d) 375 × 214 × 135 Part number ITR040362042 Download datasheet (PDF)
$640.00
-
Victron Victron VE Transfer switch 10kVA/230V
Victron VE Transfer switch 10KVA/230V – automatic transfer switch between two AC sourcesThe Victron VE Transfer Switch 10 kVA is an automatic transfer switch with two AC inputs and one output. The loads are supplied from input 1 (e.g. shore power or a generator), and if this supply fails or goes outside the voltage or frequency limits, the switch automatically changes over to input 2 – typically an inverter. During the switchover itself, the power is briefly interrupted, so sensitive electronics such as computers may lose data.Benefits Automatic switching: Switches between the two sources without manual operation. Delayed switch-back: Once input 1 has been stable for approx. 10 seconds (adjustable), it switches back – this protects your equipment during short voltage dips. 40 A per input: Rated current of 40 A on both inputs and the output, and motor loads (e.g. air conditioning) of up to 8 kW. Auxiliary contact: Together with a MultiPlus and a Digital Multi Control, it can automatically switch the current limit to a preset generator value. Applications Switching between generator and shore power in boats or motorhomes. Switching between inverter and generator or shore power. Giving a MultiPlus access to two AC sources instead of one. Specifications Specification Details Nominal voltage 200–250 V AC, single-phase Nominal frequency 50–60 Hz Rated current, input 1 and 2 40 A Rated output current 40 A Max. motor load (e.g. air conditioning) 8 kW Self-consumption, input 1 6 VA Switching time, closing contacts 10–20 ms Switching time, opening contacts 5–20 ms Delay, input 1 Approx. 10 s (adjustable) Auxiliary contact 200–240 V AC, 20 A, cos φ = 1 Operating temperature range -5 to +60 °C Humidity Max. 95% (non-condensing) Circuit breaker (MCB) and residual current device (RCD) Not included – depends on the installation Enclosure rating IP54 Colour RAL 7035 Dimensions 175 × 215 × 120 mm Weight 1.65 kg Item number COS230103100 Download manual (PDF)
$458.00
-
Victron Victron Isolation Transformer 8000W 230V
Victron Isolation transformer 8000W 230V – galvanic isolation of shore powerThe Victron Isolation transformer 8000W 230V from Victron Energy provides galvanic isolation between shore power and the onboard installation. It stops galvanic corrosion on the hull and makes the shore connection safe.Advantages Galvanic isolation: Breaks the connection to the harbor ground and stops galvanic corrosion on the hull. Safe shore power: Protects both systems and people in case of faults in the harbor grid. Robust construction: Built for permanent operation in a humid environment. Application Shore power in boats where galvanic corrosion must be avoided. Adaptation between different grid voltages. Safe isolation of ship and harbor grid. Specifications Specification Details Weight 28 kg Dimensions (h × w × d) 243 × 258 × 362 mm Part number ITR000802002 Download datasheet (PDF)
$963.00
-
Victron Victron Isolation Transformer 7000W 230V
Victron Isolation transformer 7000W 230V – galvanic isolation of shore powerThe Victron Isolation transformer 7000W 230V from Victron Energy provides galvanic isolation between shore power and the onboard installation. It stops galvanic corrosion on the hull and makes the shore connection safe.Advantages Galvanic isolation: Breaks the connection to the harbor's earth and stops galvanic corrosion on the hull. Safe shore power: Protects both the system and personnel in case of faults in the harbor grid. Robust construction: Built for permanent operation in a humid environment. Application Shore power in boats where galvanic corrosion must be avoided. Adjustment between different mains voltages. Safe isolation of the vessel and the harbor grid. Specifications Specification Details Nominal voltage 6/12/24 V Weight 30 kg Dimensions (h × w × d) 218 × 258 × 362 mm Item number ITR000702001 Download datasheet (PDF)
$1,015.00
-
Victron Victron Isolation Transformer 2500W 115/230V
Victron Isolation transformer 2500W 115/230V – galvanic isolation of shore powerThe Victron Isolation transformer 2500W 115/230V from Victron Energy provides galvanic isolation between shore power and the onboard installation. It stops galvanic corrosion on the hull and makes the shore connection safe.Advantages Galvanic isolation: Breaks the connection to the harbor ground and stops galvanic corrosion on the hull. Safe shore power: Protects both the system and people in the event of a fault in the harbor grid. Robust construction: Built for permanent operation in a humid environment. Application Shore power in a boat where galvanic corrosion must be avoided. Adaptation between different grid voltages. Safe separation of the ship and the harbor grid. Specifications Specification Details AC input voltage 115 or 230 V AC output 120 or 240 V Frequency 50/60 Hz Output current rating 17 A (115 V) / 8.5 A (230 V) Soft start Yes Operating temperature range -20 °C to 40 °C Humidity max. 95%, non-condensing Transformer type Toroidal (low noise, low weight), 1:1.05 ratio Enclosure aluminium (blue RAL 5012) Protection class IP21 Safety EN 60076 Weight 12.7 kg Dimensions (h × w × d) 375 × 214 × 135 Item number ITR040252043 Download datasheet (PDF)
$552.00
-
Victron Victron Isolation Transformer 2000W 115/230V
Victron Isolation transformer 2000W 115/230V – galvanic isolation of shore powerThe Victron Isolation transformer 2000W 115/230V from Victron Energy provides galvanic isolation between shore power and the onboard installation. It stops galvanic corrosion on the hull and makes the shore connection safe.Benefits Galvanic isolation: Breaks the connection to the shore ground and stops galvanic corrosion on the hull. Safe shore power: Protects both the system and people in the event of faults in the shore grid. Robust construction: Built for permanent operation in a humid environment. Application Shore power in boats where galvanic corrosion must be avoided. Matching between different mains voltages. Safe isolation of the vessel from the shore grid. Specifications Specification Details AC input voltage 115 or 230 V AC output 120 or 240 V Frequency 50/60 Hz Output current rating 17 A (115 V) / 8.5 A (230 V) Soft start Yes Operating temperature range -20 °C to 40 °C Humidity max. 95%, non-condensing Transformer type Toroidal (low noise, low weight), 1:1.05 ratio Enclosure aluminium (blue RAL 5012) Protection class IP21 Safety EN 60076 Weight 12.7 kg Dimensions (h × w × d) 375 × 214 × 135 Rated voltage 6/12/24 V Item number ITR040202041 Download datasheet (PDF)
$507.00
-
Victron Victron Isolation Transformer 4500W Auto 115/230V
Victron Isolation transformer 4500W Auto 115/230 – galvanic isolation of shore powerThe Victron Isolation transformer 4500W Auto 115/230 from Victron Energy provides galvanic isolation between shore power and the onboard installation. It stops galvanic corrosion on the hull and makes the shore connection safe.Advantages Galvanic isolation: Breaks the connection to the harbor's ground and stops galvanic corrosion on the hull. Safe shore power: Protects both systems and people in the event of faults in the harbor grid. Robust construction: Built for continuous operation in a humid environment. Application Shore power in a boat where galvanic corrosion must be avoided. Adaptation between different mains voltages. Safe separation of the vessel and the harbor grid. Specifications Specification Details AC input voltage 115 or 230 V, automatic detection AC output 120 or 240 V Frequency 50/60 Hz Output current rating 38 A (115 V) / 19 A (230 V) Soft start Yes Operating temperature range -20 °C to 40 °C Humidity max. 95%, non-condensing Transformer type Toroidal (low noise, low weight), 1:1.05 ratio Enclosure aluminum (blue RAL 5012) Protection class IP21 Safety EN 60076 Weight 21.8 kg Dimensions (h × w × d) 362 × 258 × 221 Item number ITR050452042 Download datasheet (PDF)
$672.00
-
Victron Victron Galvanic Isolator VDI-64 A
Victron Galvanic Isolator VDI-64 A – galvanic isolation of shore powerThe Victron Galvanic Isolator VDI-64 A from Victron Energy provides galvanic isolation between shore power and the onboard installation. It stops galvanic corrosion of the hull and makes the shore connection safe.Advantages Galvanic isolation: Breaks the connection to the shore ground and stops galvanic corrosion of the hull. Safe shore power: Protects both systems and persons in case of faults in the shore grid. Robust construction: Built for permanent operation in a humid environment. Application Shore power in boats where galvanic corrosion must be avoided. Adaptation between different grid voltages. Safe isolation of the vessel and the shore grid. Specifications Specification Details Nominal voltage 6/12/24 V Weight 2 kg Dimensions (h × w × d) 224 × 164 × 64 mm Item number GDI000064000 Download datasheet (PDF)
$371.00
-
Victron Victron Isolation Transformer 3600W 115/230V (ITR040362041)
Victron Isolation transformer 3600W 115/230V – galvanic isolation from shore powerThe Victron Isolation transformer 3600W 115/230V from Victron Energy provides galvanic isolation between shore power and the onboard installation. It stops galvanic corrosion on the hull and makes the shore connection safe.Advantages Galvanic isolation: Breaks the connection to the harbor's ground and stops galvanic corrosion on the hull. Safe shore power: Protects both systems and people in the event of faults in the harbor's power grid. Robust construction: Built for permanent operation in a humid environment. Application Shore power in a boat where galvanic corrosion must be avoided. Adjustment between different mains voltages. Safe separation of vessel and harbor power grid. Specifications Specification Details AC input voltage 115 or 230 V AC output 120 or 240 V Frequency 50/60 Hz Output current rating 17 A (115 V) / 8.5 A (230 V) Soft start Yes Operating temperature range -20 °C to 40 °C Humidity max. 95%, non-condensing Transformer type Toroidal (low noise, low weight), 1:1.05 ratio Enclosure aluminum (blue RAL 5012) Protection class IP21 Safety EN 60076 Weight 12.7 kg Dimensions (h × w × d) 375 × 214 × 135 Nominal voltage 6/12/24 V Item number ITR040362041 Download datasheet (PDF)
$856.00
-
Victron Victron Galvanic Isolator VDI-32 A
Victron Galvanic Isolator VDI-32 A – galvanic isolation of shore powerThe Victron Galvanic Isolator VDI-32 A from Victron Energy provides galvanic isolation between shore power and the onboard installation. It stops galvanic corrosion on the hull and makes the shore connection safe.Advantages Galvanic isolation: Breaks the connection to the marina's earth and stops galvanic corrosion on the hull. Safe shore power: Protects both systems and personnel in case of faults in the marina's grid. Robust construction: Built for permanent operation in a humid environment. Application Shore power in boats where galvanic corrosion must be avoided. Adaptation between different grid voltages. Safe separation of vessel and the marina's grid. Specifications Specification Details Nominal voltage 6/12/24 V Weight 2.1 kg Dimensions (h × w × d) 235 × 164 × 63 mm Item number GDI000032000 Download datasheet (PDF)
$305.00
-
Victron Victron Galvanic Isolator VDI-16 A
Victron Galvanic Isolator VDI-16 A – galvanic isolation of shore powerThe Victron Galvanic Isolator VDI-16 A from Victron Energy provides galvanic isolation between shore power and the onboard installation. It stops galvanic corrosion on the hull and makes the shore connection safe.Advantages Galvanic isolation: Breaks the connection to the harbor's ground and stops galvanic corrosion on the hull. Safe shore power: Protects both the system and people in the event of faults in the harbor's power grid. Robust construction: Built for continuous operation in a humid environment. Application Shore power in boats where galvanic corrosion must be avoided. Matching between different mains voltages. Safe separation of the vessel and the harbor's power grid. Specifications Specification Details Rated voltage 6/12/24 V Weight 1.6 kg Dimensions (h × w × d) 200 × 120 × 60 mm Part number GDI000016000 Download datasheet (PDF)
$135.00
-
Victron Victron Autotransformer 120/240 VAC-32A
Victron Autotransformer 120/240 VAC-32A – galvanic isolation of shore powerThe Victron Autotransformer 120/240 VAC-32A from Victron Energy provides galvanic isolation between shore power and the onboard installation. It stops galvanic corrosion on the hull and makes the shore connection safe.Advantages Galvanic isolation: Breaks the connection to the harbor ground and stops galvanic corrosion on the hull. Safe shore power: Protects both the system and personnel in case of faults in the harbor grid. Robust construction: Built for continuous operation in a humid environment. Application Shore power in boats where galvanic corrosion must be avoided. Matching different grid voltages. Safe isolation of the vessel and the harbor grid. Specifications Specification Details Input/output voltage 120 / 240 V Input Circuit Breaker 50 A, Two Pole Frequency 50/60 Hz Max. 240 V Feed Through current 50 A Neutral current, 30 min. 55 A @ 40 °C/100°F Neutral current, Continuous 45 A @ 40 °C/100°F Transformer type Toroidal Enclosure Aluminum Electrical terminals screw terminals 35 mm² / AWG Protection class IP21 Safety EN 60076 Weight 12.5 kg Dimensions (h × w × d) 460 × 214 × 110 mm Nominal voltage 6/12/24 V Item number ITR000100001 Download datasheet (PDF)
$596.00
-
Victron Victron Filax-2 110V/50 Hz-120V/60 Hz
Victron Filax-2 110V/50 Hz-120V/60 Hz – ultra-fast automatic transfer switch for sensitive loadsThe Victron Filax-2 is an ultra-fast automatic AC transfer switch. Normally, the loads are supplied from a priority source such as the grid, shore power or a generator; if the voltage or frequency falls outside the limits, the Filax-2 switches over to an alternative source – typically an inverter – within a maximum of 16 ms, so computers and other sensitive electronics can keep running without interruption. It is not intended for large household appliances such as washing machines or electric motors. This version is for 110 V/50 Hz and 120 V/60 Hz installations – for standard Danish 230 V systems, you need the 230 V version.Benefits Ultra-fast switching: Switches between the sources within a maximum of 16 ms. Monitors voltage and frequency: Switches to the alternative source if the voltage on the priority source is too low or its frequency is too low/high. Automatic switch-back: Switches back to the priority source once it has been within the limits for 30 seconds. Robust enclosure: IP65 ABS enclosure for operation from -20 to +50 °C. Applications Computers, network equipment and industrial controls that must not restart during a power failure. Entertainment electronics in boats or motorhomes when switching between shore power/generator and inverter. Fixed installations where an inverter provides backup for sensitive loads. Specifications Specification Details Nominal voltage and frequency 110 V/50 Hz and 120 V/60 Hz Max. current 16 A Max. switching time (both directions) 16 ms Priority source: switch at low voltage 88 V AC (50 Hz) / 90 V AC (60 Hz) Priority source: switch back at voltage above 92 V AC (50 Hz) / 94 V AC (60 Hz) Priority source: switch at low frequency 45 Hz (50 Hz grid) / 46 Hz (60 Hz grid) Max. continuous input voltage (both sources) 130 V AC Switch-back delay 30 s Operating temperature range -20 to +50 °C Humidity Max. 95% (non-condensing) Enclosure ABS, RAL 7035 (light grey) Enclosure rating IP65 Dimensions (h × w × d) 120 × 255 × 75 mm Weight 0.8 kg Item number SDFI0000110 Download datasheet (PDF)
$343.00
-
Victron Victron Filax-2 230V/50 Hz-240V/60 Hz
Victron Filax-2 230V/50 Hz-240V/60 Hz – ultra-fast automatic transfer switch for sensitive loadsThe Victron Filax-2 is an ultra-fast automatic AC transfer switch. Normally, the loads are supplied from a priority source such as the grid, shore power or a generator; if the voltage or frequency falls outside the limits, the Filax-2 switches over to an alternative source – typically an inverter – within a maximum of 16 ms, so computers and other sensitive electronics can keep running without interruption. It is not intended for large household appliances such as washing machines or electric motors. This version is for 230 V/50 Hz and 240 V/60 Hz installations.Benefits Ultra-fast switching: Switches between the sources within a maximum of 16 ms. Monitors voltage and frequency: Switches to the alternative source if the voltage on the priority source is too low or its frequency is too low/high. Automatic switch-back: Switches back to the priority source once it has been within the limits for 30 seconds. Robust enclosure: IP65 ABS enclosure for operation from -20 to +50 °C. Applications Computers, network equipment and industrial controls that must not restart during a power failure. Entertainment electronics in boats or motorhomes when switching between shore power/generator and inverter. Fixed installations where an inverter provides backup for sensitive loads. Specifications Specification Details Nominal voltage and frequency 230 V/50 Hz and 240 V/60 Hz Max. current 16 A Max. switching time (both directions) 16 ms Priority source: switch at low voltage 180 V AC Priority source: switch back at voltage above 188 V AC Priority source: switch at low frequency 45 Hz (50 Hz grid) / 46 Hz (60 Hz grid) Max. continuous input voltage (both sources) 260 V AC Switch-back delay 30 s Operating temperature range -20 to +50 °C Humidity Max. 95% (non-condensing) Enclosure ABS, RAL 7035 (light grey) Enclosure rating IP65 Dimensions (h × w × d) 120 × 255 × 75 mm Weight 0.8 kg Item number SDFI0000000 Download datasheet (PDF)
$336.00
-
Victron Victron Autotransformer 120/240 VAC-50A
Victron Autotransformer 120/240 VAC-50A – galvanic isolation of shore powerThe Victron Autotransformer 120/240 VAC-50A from Victron Energy provides galvanic isolation between shore power and the onboard installation. It stops galvanic corrosion on the hull and makes the shore connection safe.Benefits Galvanic isolation: Breaks the connection to the harbor's ground and stops galvanic corrosion on the hull. Safe shore power: Protects both the system and people in the event of faults in the harbor grid. Robust construction: Built for permanent operation in a humid environment. Application Shore power in boats where galvanic corrosion must be avoided. Adaptation between different grid voltages. Safe isolation of the vessel and the harbor grid. Specifications Specification Details Input/output voltage 120 / 240 V Input Circuit Breaker 50 A, Two Pole Frequency 50/60 Hz Max. 240 V Feed Through current 50 A Neutral current, 30 min. 55 A @ 40 °C/100°F Neutral current, Continuous 45 A @ 40 °C/100°F Transformer type Toroidal Enclosure Aluminum Electrical terminals screw terminals 35 mm² / AWG Protection class IP21 Safety EN 60076 Weight 12.5 kg Dimensions (h × w × d) 460 × 214 × 110 mm EAN 8719076066071 Item number ITR000100052 Download datasheet (PDF)
$665.00
-
Victron Victron Anti-islanding box 63A 3-phase (single unit)
Victron Anti-islanding box 63A 3-phase – original Victron accessoryThe Victron Anti-islanding box 63A 3-phase is an original accessory from Victron Energy. It integrates directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages Original Victron accessory: Fits the Victron system directly without modification. Reliable quality: Materials and workmanship designed to withstand marine and vehicle environments. Application Original accessory that fits directly into the Victron system. Motorhomes, boats, summer cottages, and off-grid systems. Safe and reliable installation. Specifications Specification Details Weight 3.185 kg Dimensions (h × w × d) 100 × 380 × 230 mm Part number RCD000300200
$1,530.00
-
Victron Victron EasySolar-II 48/5000/70-50 GX
Victron EasySolar-II 48/5000/70-50 GX – inverter and battery charger in one unitThe Victron EasySolar-II 48/5000/70-50 GX is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the campsite fuse from blowing. Automatic switch: Switches automatically between shore power and battery operation without interruption (50 A). Pure sine wave: Same power quality as the electrical grid — even for sensitive electronics. Built-in GX device: Full monitoring and remote control via the VRM Portal without additional hardware. Application Motorhomes and boats where both shore power and battery operation must be handled automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage in residential and commercial settings. Specifications Specification Details PowerControl and PowerAssist Yes Automatic switch 50 A Max. AC input current 50 A Auxiliary output 50 A Input voltage range 38 – 66 V Output in inverter mode output voltage: 230 VAC ± 2 % Frequency: 50 Hz ± 0.1 % Cont. output power at 25°C 5000 VA Cont. output power at 3700 W Cont. output power at 65°C 3000 W Max. feed-in power 5000 VA Peak power 9000 W Max. efficiency 96 % Zero-load consumption 18 W AC input input voltage range: 187-265 VAC input frequency: 45 – 65 Hz Charge voltage absorption 57.6 V Charge voltage float 55.2 V Storage mode 52.8 V Max. battery charge current 70 A Battery temperature sensor optional. Order number: ASS000001000 Programmable (AUX) relay Yes Auxiliary power supply 12V / 100 mA Programmable open collector output 70 V / 100 mA Temperature sensor Yes Analog-digital aux inputs Yes, 2x Voltage sense contacts Yes Protection a - g VE.Bus communication port for parallel and three-phase operation, remote monitoring and system integration General purpose communication port Yes, 2x Model MPPT 250/100-Tr Max. output current 100 A Max. PV power 5800 W Max. PV open circuit voltage 250 V Self-consumption 20 mA Interfaces VE.Can, USB, Ethernet, VE.Direct, Wi-Fi External AC current sensor (optional) 100 A Remote on/off Yes Operating temperature range -40 to +65 °C (fan-assisted cooling). Maximum Altitude 2000 m Humidity (non-condensing) max. 95 % Material and color steel, blue RAL 5012 Protection class IP22 Battery connection M8 bolts 230VAC connection screw terminals 13 mm² (6 AWG) Weight 31 kg Dimensions (h × w × d) 565 × 323 × 148 mm Safety EN-IEC 62019-1, EN-IEC 6201-2, EN-IEC 60335-1, EN-IEC 60335-2-29 Emission / immunity IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 Uninterruptible power supply (UPS) IEC 62040-1 Nominal voltage 48 V Item number PMP482507010 Download datasheet (PDF)
$2,159.00
-
Victron Victron Autotransformer 120/240 VAC-100A
Victron Autotransformer 120/240 VAC-100A – galvanic isolation of shore powerThe Victron Autotransformer 120/240 VAC-100A from Victron Energy provides galvanic isolation between shore power and the onboard installation. It prevents galvanic corrosion on the hull and makes the shore connection safe.Advantages Galvanic isolation: Breaks the connection to the harbor's ground and stops galvanic corrosion on the hull. Safe shore power: Protects both systems and personnel in the event of faults in the harbor grid. Robust construction: Built for permanent operation in a humid environment. Applications Shore power in boats where galvanic corrosion must be avoided. Matching between different grid voltages. Safe isolation of the vessel from the harbor grid. Specifications Specification Details Input/output voltage 120 / 240 V Input Circuit Breaker 50 A, Two Pole Frequency 50/60 Hz Max. 240 V Feed Through current 50 A Neutral current, 30 min. 55 A @ 40 °C/100°F Neutral current, Continuous 45 A @ 40 °C/100°F Transformer type Toroidal Enclosure Aluminum Electrical terminals screw terminals 35 mm² / AWG Protection class IP21 Safety EN 60076 Weight 12.5 kg Dimensions (h × w × d) 460 × 214 × 110 mm Nominal voltage 6/12/24 V Part number ITR000100101 Download datasheet (PDF)
$640.00
-
Victron Victron EasySolar-II GX 24V/3000W/70A-32 MPPT 250/70
Victron EasySolar-II GX 24V/3000W/70A-32 MPPT 250/70 – inverter and battery charger in one unitThe Victron EasySolar-II GX 24V/3000W/70A-32 MPPT 250/70 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies your installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the fuse at the campsite or marina from blowing. Automatic transfer switch: Switches automatically between shore power and battery operation without interruption (32 A). Pure sine wave: The same power quality as the mains grid — also for sensitive electronics. Built-in GX device: Full monitoring and remote control via the VRM Portal without extra hardware. Applications Motorhomes and boats where both shore power and battery operation need to be handled automatically. Off-grid and hybrid systems with solar panels and a generator. Backup power systems and energy storage in homes and businesses. Specifications Specification Details PowerControl and PowerAssist Yes Transfer switch 32 A Max. AC input current 32 A Auxiliary output 32 A Input voltage range 19 - 33 V Output in inverter mode Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0.1% Cont. output power at 25°C 3000 VA Cont. output power at 2200 W Cont. output power at 65°C 1700 W Max. feed-back power 3000 VA Peak power 5500 W Max. efficiency 94 % Zero-load power consumption 13 W AC input Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz Charge voltage, absorption 28.8 V Charge voltage, float 27.6 V Storage mode 26.4 V Max. battery charge current 70 A Battery temperature sensor Yes Programmable (AUX) relay Yes Auxiliary power supply 12V / 100 mA Programmable open collector output 70 V / 100 mA Temperature sensor Yes Analogue/digital aux inputs Yes, 2x Voltage sense contacts Yes Protection a - g VE.Bus communication port for parallel and three-phase operation, remote monitoring and system integration General-purpose communication port Yes, 2x Model MPPT 250/70-Tr Max. output current 70 A Max. PV power 2000 W Max. PV open-circuit voltage 250 V Own consumption 20 mA Interfaces VE.Can, USB, Ethernet, VE.Direct, Wi-Fi External AC current sensor (optional) 100 A Remote on/off Yes Operating temperature range -40 to +65 °C (fan-assisted cooling). Maximum altitude 2000 m Humidity (non-condensing) max. 95% Material and colour steel, blue RAL 5012 Enclosure rating IP22 Battery connection M8 bolts / M8 bolts 230VAC connection screw terminals 13 mm² (6 AWG) Weight 20 kg Dimensions (h × w × d) 506 × 275 × 147 mm Safety EN-IEC 62019-1, EN-IEC 6201-2, EN-IEC 60335-1, EN-IEC 60335-2-29 Emission / immunity EN55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 Uninterruptible power supply (UPS) IEC 62040-1 Nominal voltage 24 V Item number PMP242307010 Download datasheet (PDF)
$1,524.00
-
Victron Victron EasySolar 12/1600/70-16 230V MPPT 100/50
Victron EasySolar 12/1600/70-16 230V MPPT 100/50 – inverter and battery charger in one unitThe Victron EasySolar 12/1600/70-16 230V MPPT 100/50 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the campsite fuse from blowing. Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics. Applications Camper vans and boats where both shore power and battery operation must be managed automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage for residential and commercial use. Specifications Specification Details Nominal voltage 12 V Weight 11 kg Dimensions (h × w × d) 110 × 214 × 510 mm Item number CEP122161000 Download datasheet (PDF)
$1,302.00
-
Victron Victron EasySolar-II 48/5kVA 48/3000 MPPT 250/70 GX
Victron EasySolar-II 48/4k5/55-32 MPPT 250/70 GX – inverter and battery charger in one unitThe Victron EasySolar-II 48/4k5/55-32 MPPT 250/70 GX is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Advantages PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power, preventing the site's fuse from tripping. Automatic transfer switch: Switches automatically between shore power and battery operation without interruption (32 A). Pure sine wave: The same power quality as the mains — also for sensitive electronics. Built-in GX device: Full monitoring and remote control via the VRM Portal without additional hardware. Application Motorhomes and boats where both shore power and battery operation must be handled automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage for residential and commercial use. Specifications Specification Details PowerControl and PowerAssist Yes Automatic transfer switch 32 A Max. AC input current 32 A Input voltage range 38 – 60 V Output in inverter mode output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0.1% Cont. output power at 25°C 4 kW Cont. output power at 40°C 3.7 kW Cont. output power at 65°C 3 kW Time-limited power 1 (cold start) 4.5 kW/2h Time-limited power 2 (cold start) 6 kW/25min Max. feed-in power 4 kW Peak power 7 kW/1min Max. efficiency 95% Zero-load consumption 20 W AC input input voltage range: 187-265 VAC input frequency: 45–65 Hz Charge voltage absorption 57.6 V Charge voltage float 55.2 V Storage mode 52.8 V Max. battery charge current at 25°C 55 A Max. battery charge current at 40°C 50 A Battery temperature sensor optional. Order number: ASS000001000 Compatible battery chemistries Lithium, Lead-acid, Zinc-Bromine and more(3) Auxiliary output Yes (32 A) External AC current sensor (optional) 100 A Programmable relay Yes Protection a - g VE.Bus communication port for parallel and three-phase operation, remote monitoring and system integration General purpose communication port Yes, 2x Remote on/off Yes GX device interfaces VE.Can, USB, Ethernet, VE.Direct, Wi-Fi Operating temperature range -40 to +65 °C (fan-assisted cooling). Humidity Maximum 95% Max. altitude 2000 m Model MPPT 250/70-Tr Max. output current 70 A Max. PV power 4000 W Max. PV open-circuit voltage 250 V Self-consumption 20 mA Material and color steel, blue RAL 5012 Protection class IP21 Battery connection M8 bolts 230VAC connection screw terminals 13 mm² (6 AWG) Weight 28.8 kg Dimensions (h × w × d) 591 × 275 × 254 mm Safety EN-IEC 62019-1, EN-IEC 6201-2, EN-IEC 60335-1, EN-IEC 60335-2-29 Emission / immunity EN55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 Uninterruptible Power Supply (UPS) IEC 62040-1 Nominal voltage 48 V Item number PMP482457010 Download datasheet (PDF)
$1,655.00
-
Victron Victron EasySolar 24/1600/40 MPPT 100/50
Victron EasySolar 24/1600/40 MPPT 100/50 – inverter and battery charger in one unitThe Victron EasySolar 24/1600/40 MPPT 100/50 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Advantages PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power, preventing the site fuse from blowing. Pure sine wave: Power quality identical to the electrical grid — even for sensitive electronics. Application Camper vans and boats, where both shore power and battery operation must be handled automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage for residential and commercial use. Specifications Specification Details Nominal voltage 24 V Weight 12 kg Dimensions (h × w × d) 110 × 214 × 745 mm Item number CEP242161010 Download datasheet (PDF)
$1,302.00
-
Victron Victron EasySolar-II GX 48V/3000VA/35A-32 MPPT 250/70
Victron EasySolar-II GX 48V/3000W/35A-32 MPPT 250/70 – inverter and battery charger in one unitThe Victron EasySolar-II GX 48V/3000W/35A-32 MPPT 250/70 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies your installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the fuse at the campsite or marina from blowing. Pure sine wave: The same power quality as the mains grid — also for sensitive electronics. Built-in GX device: Full monitoring and remote control via the VRM Portal without extra hardware. Applications Motorhomes and boats where both shore power and battery operation need to be handled automatically. Off-grid and hybrid systems with solar panels and a generator. Backup power systems and energy storage in homes and businesses. Specifications Specification Details Nominal voltage 48 V Weight 26 kg Dimensions (h × w × d) 237 × 268 × 499 mm Item number PMP482307010 Download datasheet (PDF)
$1,470.00
-
Victron Victron Quattro inverter/charger 48V/8000W/110A
Victron Quattro inverter/charger 48V/8000W/110A – inverter and battery charger in one unitThe Victron Quattro inverter/charger 48V/8000W/110A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Benefits PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the campsite fuse from blowing. Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics. Application Motorhomes and boats where both shore power and battery operation must be handled automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage in residential and commercial settings. Specifications Specification Details Nominal voltage 48 V Weight 44 kg Dimensions (h × w × d) 280 × 350 × 470 mm Item number QUA488024000 Download datasheet (PDF)
$2,867.00
-
Victron Victron Quattro-II 48V/5000W/70A-50/50
Victron Quattro-II 48V/5000W/70A-50/50 – inverter and battery charger in one unitThe Victron Quattro-II 48V/5000W/70A-50/50 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power, preventing the site's circuit breaker from tripping. Pure sine wave: Same power quality as the electrical grid — also for sensitive electronics. Application Camper vans and boats, where both shore power and battery operation must be handled automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage for residential and commercial use. Specifications Specification Details PowerControl / PowerAssist Yes AC input Input frequency: 45 - 65 Hz Max. feed-through current 50 A Input voltage range 38 – 66 V Output in inverter mode Frequency: 50 Hz ± 0.1 % Cont. output power at 25°C / 77°F 5000 VA Cont. output power at 40°C / 104°F 3700 W Cont. output power at 65°C / 150°F 3000 W Max. feed-in power 5000 VA Peak power 9000 W Max. efficiency 96 % Zero-load consumption 18 W Absorption charge voltage 57.6 V Float charge voltage 55.2 V Storage mode 52.8 V House battery charge current 70 A Auxiliary output Yes (32 A) Programmable relay Yes Protection a - g VE.Bus communication port for parallel and three-phase operation, remote monitoring, and system integration General purpose com. port Yes, 2x Common Characteristics Operating temp.: -40 to +65 °C (-40 – 150°F) / (fan-assisted cooling) / Humidity (non-condensing): max. 95 % / Maximum Altitude 2000 m Material and color steel, blue RAL 5012 / Protection category: IP21 / Pollution degree 2, OVC3 Battery connections M8 bolts 230 VAC connections screw terminals 13 mm² (6 AWG) Weight 29 kg Dimensions (h × w × d) 565 × 320 × 148 mm Safety EN 60335-1, EN 60335-2-29, IEC62109-1, IEC62109-2 Emission / immunity EN 55014-1, EN 55014-2, / EN-IEC 61000-3-2, EN-IEC 61000-3-3 / IEC 61000-6-1, EN 61000-6-2, / EN 61000-6-3 Emergency power supply (UPS) Please consult certificates on our website. Anti-islanding Please consult certificates on our website. Nominal voltage 48 V Item number QUA482504010 Download datasheet (PDF)
$1,479.00
-
Victron Victron Quattro inverter/charger 48V/15000W/200A
Victron Quattro inverter/charger 48V/15000W/200A – inverter and battery charger in one unitThe Victron Quattro inverter/charger 48V/15000W/200A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Advantages PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the site fuse from blowing. Pure sine wave: The same power quality as the grid — also for sensitive electronics. Application Motorhomes and boats where both shore power and battery operation must be handled automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage for residential and commercial use. Specifications Specification Details Nominal voltage 48 V Weight 94.5 kg Dimensions (h × w × d) 344 × 488 × 572 mm Item number QUA483150000 Download datasheet (PDF)
$4,062.00 $3,909.00
-
Victron Victron Quattro inverter/charger 24V/5000W/120A
Victron Quattro inverter/charger 24V/5000W/120A – inverter and battery charger in one unitThe Victron Quattro inverter/charger 24V/5000W/120A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the campsite fuse from blowing. Pure sine wave: Same power quality as the grid — even for sensitive electronics. Application Motorhomes and boats, where both shore power and battery operation must be handled automatically. Off-grid and hybrid systems with solar panels and generators. Backup power systems and energy storage in residential and commercial settings. Specifications Specification Details Nominal voltage 24 V Weight 33 kg Dimensions (h × w × d) 340 × 328 × 444 mm Item number QUA245021010 Download datasheet (PDF)
$2,449.00
-
Victron Victron Quattro inverter/charger 12V/3000W/120A
Victron Quattro inverter/charger 12V/3000W/120A – inverter and battery charger in one unitThe Victron Quattro inverter/charger 12V/3000W/120A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the site's circuit breaker from tripping. Pure sine wave: Same power quality as the mains — even for sensitive electronics. Applications Motorhomes and boats where both shore power and battery operation must be managed automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage in residential and commercial settings. Specifications Specification Details Nominal voltage 12 V Weight 22 kg Dimensions (h × w × d) 218 × 258 × 362 mm Item number QUA123020010 Download datasheet (PDF )
$2,066.00
-
Victron Victron Quattro inverter/charger 48V/10000W/140A
Victron Quattro inverter/charger 48V/10000W/140A – inverter and battery charger in one unitThe Victron Quattro inverter/charger 48V/10000W/140A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the site fuse from tripping. Pure sine wave: Same power quality as the grid — also for sensitive electronics. Applications Motorhome and boat, where both shore power and battery operation must be managed automatically. Off-grid and hybrid systems with solar panels and generator. Emergency power systems and energy storage for residential and commercial use. Specifications Specification Details Nominal voltage 48 V Weight 45 kg Dimensions (h × w × d) 280 × 350 × 470 mm Item number QUA481030010 Download datasheet (PDF)
$3,168.00
-
Victron Victron Quattro inverter/charger 24V/8000W/200A
Victron Quattro inverter/charger 24V/8000W/200A – inverter and battery charger in one unitThe Victron Quattro inverter/charger 24V/8000W/200A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the campsite fuse from blowing. Pure sine wave: The same power quality as the electrical grid — also for sensitive electronics. Application Motorhomes and boats where both shore power and battery operation must be handled automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage in residential and commercial settings. Specifications Specification Details Nominal voltage 24 V Weight 44 kg Dimensions (h × w × d) 280 × 350 × 470 mm Item number QUA248020010 Download datasheet (PDF)
$3,061.00
-
Victron Victron Quattro inverter/charger 24V/3000W/70A
Victron Quattro inverter/charger 24V/3000W/70A – inverter and battery charger in one unitThe Victron Quattro inverter/charger 24V/3000W/70A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Advantages PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power, preventing the site fuse from blowing. Pure sine wave: The same power quality as the electrical grid — also for sensitive electronics. Application Campervans and boats where both shore power and battery operation must be handled automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage in residential and commercial settings. Specifications Specification Details Nominal voltage 24 V Weight 22 kg Dimensions (h × w × d) 218 × 258 × 362 mm Item number QUA243020010 Download datasheet (PDF)
$1,775.00
-
Victron Victron Quattro inverter/charger 12V/5000W/220A
Victron Quattro inverter/charger 12V/5000W/220A – inverter and battery charger in one unitThe Victron Quattro inverter/charger 12V/5000W/220A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power, preventing the site fuse from blowing. Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics. Application Campervans and boats where both shore power and battery operation need to be handled automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage for residential and commercial use. Specifications Specification Details Nominal voltage 12 V Weight 31.9 kg Dimensions (h × w × d) 280 × 350 × 470 mm Part number QUA125020000 Download datasheet (PDF)
$2,935.00
-
Victron Victron Quattro 48V/5000W/70A-100/100
Victron Quattro 48V/5000W/70A-100/100 – inverter and battery charger in one unitThe Victron Quattro 48V/5000W/70A-100/100 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the campsite fuse from blowing. Pure sine wave: Same power quality as the grid — also for sensitive electronics. Application Campervans and boats where both shore power and battery operation must be handled automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage for residential and commercial use. Specifications Specification Details Nominal voltage 48 V Weight 35 kg Dimensions (h × w × d) 240 × 328 × 444 mm Item number QUA485021010 Download datasheet (PDF)
$1,952.00
-
Victron Victron MultiPlus-II 48V/8000W/110/100
Victron MultiPlus-II 48V/8000W/110/100 – inverter and battery charger in one unitThe Victron MultiPlus-II 48V/8000W/110/100 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It delivers 8000 VA of pure sine wave 230V and automatically switches between shore power and battery operation.Advantages 8000 VA output power: Peak power of 15000 W for motor starting and short-term loads. PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power, preventing the site's fuse from tripping. Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics. Application Motorhomes and boats where both shore power and battery operation must be handled automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage for homes and businesses. Specifications Specification Details PowerControl / PowerAssist Yes AC input Input voltage range: 187 - 265VAC, / Input frequency: 45 - 65 Hz Max. feed-through current 100 A Input voltage range 38 - 66 V Output Output voltage: 230VAC ± 2 % / Frequency: 50 Hz ± 0.1 % Continuous output power at 25 °C 8000 VA Continuous output power at 40 °C 5500 W Continuous output power at 65 °C 4000 W Max. feed-in power 8000 VA Peak power 15000 W Max. efficiency 95 % Zero-load consumption 29 W Charge voltage absorption 57.6 V Charge voltage float 55.2 V Storage mode 52.8 V Charge current house battery 110 A Auxiliary output Yes (50 A) External AC current sensor (optional) 100 A Programmable relay Yes Protection a - g VE.Bus communication port Three-phase and parallel(6) operation, remote monitoring and system integration General purpose com. port Yes, 2x Common characteristics Operating temp.: -40 to +65 °C (-40 – 150°F) / (fan-assisted cooling) / Humidity (non-condensing): max. 95 % / Maximum altitude: 2000 m Material and color Steel, blue RAL 5012 / Pollution degree 2, OVC3 Pollution degree OVC3 Protection class IP 22 Battery connections Four M8 bolts (2 positive and 2 negative connections) AC connections Bolts M6 Weight 41.2 kg Dimensions (h × w × d) 642 × 363 × 206 mm Safety EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2 Emission / immunity EN 55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 Uninterruptible power supply (UPS) Please consult certificates on our website. Anti-islanding Please consult certificates on our website. Nominal voltage 48 V Item number PMP482805000 Download datasheet (PDF)
$1,828.00
-
Victron Victron Quattro-II inverter/charger 24V/5000W/120A
Victron Quattro-II inverter/charger 24V/5000W/120A – inverter and battery charger in one unitThe Victron Quattro-II inverter/charger 24V/5000W/120A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Benefits PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the circuit breaker at the site from tripping. Pure sine wave: Same power quality as the grid — even for sensitive electronics. Application Camper vans and boats where both shore power and battery operation must be handled automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage in homes and businesses. Specifications Specification Details PowerControl / PowerAssist Yes AC input input voltage range: 187 - 265VAC Max. feed-through current 50 A Input voltage range 19 – 33 V Output in inverter mode output voltage: 230VAC ± 2 % Cont. output power at 25°C / 77°F 5000 VA Cont. output power at 40°C / 104°F 3700 W Cont. output power at 65°C / 150°F 3000 W Max. feed-in power 5000 VA Peak power 9000 W Max. efficiency 96 % Zero-load consumption 18 W Charge voltage absorption 28.8 V Charge voltage float 27.6 V Storage mode 26.4 V Charge current house battery 120 A Auxiliary output Yes (32 A) Programmable relay Yes Protection a - g VE.Bus communication port for parallel and three-phase operation, remote monitoring and system integration General purpose com. port Yes, 2x Common Characteristics Operating temp.: -40 to +65 °C (-40 – 150°F) / (fan-assisted cooling) / Humidity (non-condensing): max. 95 % / Maximum Altitude 2000 m Material and color steel, blue RAL 5012 / Protection category: IP21 / Pollution degree 2, OVC3 Battery connections M8 bolts 230 VAC connections screw terminals 13 mm² (6 AWG) Weight 31 kg Dimensions (h × w × d) 607 × 329 × 149 mm Safety EN 60335-1, EN 60335-2-29, IEC62109-1, IEC62109-2 Emission / immunity EN 55014-1, EN 55014-2, / EN-IEC 61000-3-2, EN-IEC 61000-3-3 / IEC 61000-6-1, EN 61000-6-2, / EN 61000-6-3 Emergency power supply (UPS) Please consult certificates on our website. Anti-islanding Please consult certificates on our website. Nominal voltage 24 V Item number QUA242505010 Download datasheet (PDF)
$2,499.00
-
Victron Victron MultiPlus-II 48/6k5/100-50
Victron MultiPlus-II 48/6k5/100-50 – inverter and battery charger in one unitThe Victron MultiPlus-II 48/6k5/100-50 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It delivers 6 kW of pure sine wave 230V and automatically switches between shore power and battery operation.Advantages 6 kW output power: Peak power of 11 kW/1min for motor starting and short-term loads. PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the campsite fuse from blowing. Pure sine wave: Same power quality as the grid — also for sensitive electronics. Applications Camper vans and boats, where both shore power and battery operation must be managed automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage in residential and commercial settings. Specifications Specification Details PowerControl / PowerAssist Yes AC input input voltage range: 187 - 265VAC Max. feed-through current 50 A Max. AC input current 50 A DC input voltage range 38 - 60 V AC output output voltage: 230VAC ± 2 % Continuous output power at 25 °C 6 kW Continuous output power at 40 °C 5.7 kW Continuous output power at 65 °C 4.6 kW Time-limited power 1 (cold start) 6.5 kW/4h Time-limited power 2 (cold start) 8 kW/1h Max. feed-in power 6 kW Peak power 11 kW/1min Max. efficiency 96 % Zero-load consumption 28 W Charge voltage absorption 57.6 V Charge voltage float 55.2 V Storage mode 52.8 V Max. battery charge current at 25 °C 100 A Max. battery charge current at 40 °C 95 A Battery temperature sensor optional. Order number: ASS000001000 Compatible battery chemistries Lithium, Lead-acid and more (3) Auxiliary output Yes (32 A) External AC current sensor (optional) 100 A Programmable relay Yes Protection a - g VE.Bus communication port Three-phase and parallel operation, remote monitoring and system integration General-purpose communication port Yes, 2x Operating temperature range -40 to +65 °C (-40 – 150°F), fan-assisted cooling Max. humidity 95 % (non-condensing) Max. altitude 4000 m with 1 %/100 m power derating above 2000 m Material and color steel, blue RAL 5012 Protection class IP 21 Battery connections One positive M8 bolt and one negative M8 bolt AC connections screw terminals 13 mm² (6 AWG) Weight 29 kg Dimensions (h × w × d) 644 × 320 × 150 mm Safety EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2 Emission / immunity EN 55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 Uninterruptible Power Supply (UPS) IEC 62040 Anti-islanding IEC 62116 Nominal voltage 48 V Quantity per pallet 15 PCS Item number PMP482605012 Download datasheet (PDF)
$1,213.00
-
Victron Victron MultiPlus-II 12/4K/160-32 230V
Victron MultiPlus-II 12/4K/160-32 230V – inverter and battery charger in one unitThe Victron MultiPlus-II 12/4K/160-32 230V is a combined inverter and battery charger from Victron Energy — two functions in one unit. It delivers 3.4 kW of pure sine wave 230V and automatically switches between shore power and battery operation.Advantages 3.4 kW output power: Peak power of 6 kW/30s for motor starting and short-term loads. PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the circuit breaker at the site from tripping. Pure sine wave: The same power quality as the electrical grid — also for sensitive electronics. Application Camper vans and boats where both shore power and battery operation must be handled automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage in residential and commercial settings. Specifications Specification Details PowerControl / PowerAssist Yes AC input Input voltage range: 187 - 265VAC Max. feed-through current 32 A Max. AC input current 32 A DC input voltage range 9.5-17 V AC output Output voltage: 230VAC ± 2% Continuous output power at 25 °C 3.4 kW Continuous output power at 40 °C 3.1 kW Continuous output power at 65 °C 2.6 kW Time-limited power 1 (cold start) 4 kW/1h Time-limited power 2 (cold start) 4.5 kW/2s Max. feed-in power 3.4 kW Peak power 6 kW/30s Max. efficiency 93 % Zero-load consumption 18 W Charge voltage absorption 14.4 V Charge voltage float 13.8 V Storage mode 13.2 V Max. battery charge current at 25 °C 160 A Max. battery charge current at 40 °C 150 A Battery temperature sensor Yes Compatible battery chemistries Lithium, Lead-acid and more (3) Auxiliary output Yes (32 A) External AC current sensor (optional) 100 A Programmable relay Yes Protection a - g VE.Bus communication port Three-phase and parallel operation, remote monitoring and system integration General-purpose communication port Yes, 2x Operating temperature range -40 to +65 °C (-40 – 150°F), fan-assisted cooling Max. humidity 95 % (non-condensing) Max. altitude 4000 m with 1 %/100 m power derating above 2000 m Material and color steel, blue RAL 5012 Enclosure class IP 21 Battery connections Two positive M8 bolts and two negative M8 bolts AC connections screw terminals 13 mm² (6 AWG) Weight 22 kg Dimensions (h × w × d) 576 × 276 × 164 mm Safety EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2 Emission / immunity EN 55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 Uninterruptible power supply (UPS) IEC 62040 Anti-islanding IEC 62116 Item number PMP122405010 Download datasheet (PDF)
$1,805.00
-
Victron Victron MultiPlus-II 48/4K5/55-32 GX
Victron MultiPlus-II 48/4K5/55-32 GX – inverter and battery charger in one unitThe Victron MultiPlus-II 48/4K5/55-32 GX is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Advantages PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the circuit breaker at the site from tripping. Automatic switch: Switches automatically between shore power and battery operation without interruption (32 A). Pure sine wave: Same power quality as the electrical grid — even for sensitive electronics. Built-in GX device: Full monitoring and remote control via the VRM Portal without extra hardware. Application Motorhomes and boats where both shore power and battery operation must be managed automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage in residential and commercial settings. Specifications Specification Details PowerControl and PowerAssist Yes Automatic switch 32 A Max. AC input current 32 A Auxiliary output Yes (32 A) Input voltage range 38 – 60 V Output in inverter mode Output voltage: 230 VAC ± 2 % Frequency: 50 Hz ± 0.1 % Cont. output power at 25°C 4 kW Cont. output power at 3.7 kW Cont. output power at 65°C 3 kW Time-limited power 1 (cold start) 4.5 kW/2h Time-limited power 2 (cold start) 6 kW/25min Max. fed-back power 4 kW Peak power 7 kW / 1min Max. efficiency 95 % Zero-load consumption 20 W AC input Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz Charge voltage absorption 57.6 V Charge voltage float 55.2 V Storage mode 52.8 V Max. battery charge current 55 A Battery temperature sensor Yes Compatible battery chemistries Lithium, Lead-acid, Zinc-Bromine and more (3) Programmable (AUX) relay Yes Auxiliary power supply 12V / 100 mA Programmable open collector output 70 V / 100 mA Analog-digital aux inputs Yes, 2x Temperature sensor Optional. Order number: ASS000001000 Voltage sense contacts Yes Protection a - g VE.Bus communication port for parallel and three-phase operation, remote monitoring and system integration General purpose communication port Yes, 2x Interfaces VE.Can, USB, Ethernet, VE.Direct, Wi-Fi External AC current sensor (optional) 100 A Remote on/off Yes Operating temperature range -40 to +65 °C (fan-assisted cooling). Maximum Altitude 2000 m Humidity (non-condensing) max. 95 % Material and color steel, blue RAL 5012 Enclosure class IP21 Battery connection M8 bolts 230VAC connection screw terminals 13 mm² (6 AWG) Weight 21.4 kg Dimensions (h × w × d) 590 × 275 × 149 mm Safety EN-IEC 62019-1, EN-IEC 6201-2, EN-IEC 60335-1, EN-IEC 60335-2-29 Emission / immunity EN55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 Emergency power supply (UPS) Certification pending Anti-islanding Certification pending Item number PMP482406000 Download datasheet (PDF)
$1,124.00
-
Victron Victron MultiPlus-II 48/6K5/100-50 GX
Victron MultiPlus-II 48/6K5/100-50 GX – inverter and battery charger in one unitThe Victron MultiPlus-II 48/6K5/100-50 GX is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the site fuse from tripping. Automatic transfer switch: Switches between shore power and battery operation automatically without interruption (50 A). Pure sine wave: Same power quality as the electrical grid — also suitable for sensitive electronics. Built-in GX unit: Full monitoring and remote control via the VRM Portal without extra hardware. Application Motorhomes and boats where both shore power and battery operation must be managed automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage in residential and commercial settings. Specifications Specification Details PowerControl and PowerAssist Yes Automatic transfer switch 50 A Max. AC input current 50 A Auxiliary output Yes (32 A) Input voltage range 38 – 60 V Output in inverter mode output voltage: 230 VAC ± 2 % Frequency: 50 Hz ± 0.1 % Cont. output power at 25°C 6 kW Cont. output power at 40°C 5.7 kW Cont. output power at 65°C 4.6 kW Time-limited power 1 (cold start) 4.5 kW/2h Time-limited power 2 (cold start) 8 kW/1h Max. feed-in power 6 kW Peak power 11 kW / 1min Max. efficiency 96 % Zero-load consumption 28 W AC input input voltage range: 187-265 VAC input frequency: 45 – 65 Hz Absorption charge voltage 57.6 V Float charge voltage 55.2 V Storage mode 52.8 V Max. battery charge current 100 A Battery temperature sensor Yes Compatible battery chemistries Lithium, Lead-acid, Zinc-Bromine and more (3) Programmable (AUX) relay Yes Auxiliary power supply 12V / 100 mA Programmable open collector output 70 V / 100 mA Analog-digital aux inputs Yes, 2x Temperature sensor optional. Order number: ASS000001000 Voltage sense contacts Yes Protection a - g VE.Bus communication port for parallel and three-phase operation, remote monitoring and system integration General purpose communication port Yes, 2x Interfaces VE.Can, USB, Ethernet, VE.Direct, Wi-Fi External AC current sensor (optional) 100 A Remote on/off Yes Operating temperature range -40 to +65 °C (fan-assisted cooling). Maximum Altitude 2000 m Humidity (non-condensing) max. 95 % Material and color steel, blue RAL 5012 Protection class IP21 Battery connection M8 bolts 230VAC connection screw terminals 13 mm² (6 AWG) Weight 29.0 kg Dimensions (h × w × d) 644 × 320 × 150 mm Safety EN-IEC 62019-1, EN-IEC 6201-2, EN-IEC 60335-1, EN-IEC 60335-2-29 Emission / immunity EN55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 Emergency power supply (UPS) Certification pending Anti-islanding Certification pending Item number PMP482606000 Download datasheet (PDF)
$1,441.00
-
Victron Victron MultiPlus-II 48V/10000VA/140-100
Victron MultiPlus-II 48V/10000W/140-100 – inverter and battery charger in one unitThe Victron MultiPlus-II 48V/10000W/140-100 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It delivers 10000 VA pure sine 230V and automatically switches between shore power and battery operation.Advantages 10000 VA output power: Peak power of 18000 W for motor starting and short-term loads. PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power, preventing the site's fuse from tripping. Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics. Application Motorhomes and boats, where both shore power and battery operation must be handled automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage for residential and commercial use. Specifications Specification Details PowerControl / PowerAssist Yes AC input Input voltage range: 187 - 265VAC, / input frequency: 45 - 65 Hz Max. feed-through current 100 A Input voltage range 38 - 66 V Output Output voltage: 230VAC ± 2 % / frequency: 50 Hz ± 0.1 % Continuous output power at 25 °C 10000 VA Continuous output power at 40 °C 7000 W Continuous output power at 65 °C 6000 W Max. feed-in power 10000 VA Peak power 18000 W Max. efficiency 95 % Zero-load consumption 38 W Charge voltage absorption 57.6 V Charge voltage float 55.2 V Storage mode 52.8 V Charge current house battery 140 A Auxiliary output Yes (50 A) External AC current sensor (optional) 100 A Programmable relay Yes Protection a - g VE.Bus communication port Three-phase and parallel (6) operation, remote monitoring and system integration General purpose com. port Yes, 2x Common characteristics Operating temp.: -40 to +65 °C (-40 – 150°F) / (fan-assisted cooling) / Humidity (non-condensing): max. 95 % / Maximum altitude: 2000 m Material and color steel, blue RAL 5012 / Pollution degree 2, OVC3 Pollution degree OVC3 Protection class IP 22 Battery connections Four M8 bolts (2 positive and 2 negative connections) AC connections Bolts M6 Weight 48.8 kg Dimensions (h × w × d) 677 × 363 × 206 mm Safety EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2 Emission / immunity EN 55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 Uninterruptible power supply (UPS) Please consult certificates on our website. Anti-islanding Please consult certificates on our website. Nominal voltage 48 V Part number PMP483105000 Download datasheet (PDF)
$2,249.00
-
Victron Victron MultiPlus inverter/charger 48V/5000W/70A
Victron MultiPlus inverter/charger 48V/5000W/70A – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 48V/5000W/70A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Benefits PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power, preventing the site's fuse from blowing. Pure sine wave: Power quality identical to the grid — even for sensitive electronics. Application Motorhomes and boats where both shore power and battery operation must be handled automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage in residential and commercial settings. Specifications Specification Details Nominal voltage 48 V Weight 35 kg Dimensions (h × w × d) 240 × 328 × 444 mm Item number PMP485021010 Download datasheet (PDF)
$1,374.00
-
Victron Victron MultiPlus inverter/charger 48V/500W/6A
Victron MultiPlus inverter/charger 48V/500W/6A – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 48V/500W/6A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Benefits PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power, preventing the site's fuse from blowing. Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics. Application Camper vans and boats where both shore power and battery operation need to be handled automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage for residential and commercial use. Specifications Specification Details Nominal voltage 48 V Weight 4.4 kg Dimensions (h × w × d) 100 × 181 × 311 mm Item number PMP481500000 Download datasheet (PDF)
$310.00
-
Victron Victron MultiPlus inverter/charger 48V/800W/9A
Victron MultiPlus inverter/charger 48V/800W/9A – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 48V/800W/9A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the site fuse from blowing. Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics. Application Motorhome and boat, where both shore power and battery operation must be handled automatically. Off-grid and hybrid systems with solar cells and generator. Emergency power systems and energy storage in residential and commercial settings. Specifications Specification Details Rated voltage 48 V Weight 7.5 kg Dimensions (h × w × d) 100 × 240 × 360 mm Item number PMP481800000 Download datasheet (PDF)
$368.00 $334.00
-
Victron Victron MultiPlus inverter/charger 48V/1600W/13A
Victron MultiPlus inverter/charger 48V/1600W/13A – inverter and battery charger in one unitThe Victron MultiPlus inverter/charger 48V/1600W/13A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the site fuse from blowing. Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics. Application Motorhomes and boats where both shore power and battery operation must be handled automatically. Off-grid and hybrid systems with solar panels and generators. Emergency power systems and energy storage in residential and commercial settings. Specifications Specification Details Nominal voltage 48 V Weight 11.5 kg Dimensions (h × w × d) 120 × 270 × 465 mm Part number PMP482160000 Download datasheet (PDF)
$610.00
-
Victron Victron MultiPlus 48V/3000W/35A-50 inverter/charger
Victron MultiPlus 48V/3000W/35A-50 – inverter and battery charger in one unitThe Victron MultiPlus 48V/3000W/35A-50 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies your installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the fuse at the campsite or marina from blowing. Pure sine wave: The same power quality as the mains grid — also for sensitive electronics. Applications Motorhomes and boats where both shore power and battery operation need to be handled automatically. Off-grid and hybrid systems with solar panels and a generator. Backup power systems and energy storage in homes and businesses. Specifications Specification Details Nominal voltage 48 V Weight 20 kg Dimensions (h × w × d) 218 × 258 × 362 mm Item number PMP483021010 Download datasheet (PDF)
$1,032.00
-
Victron Victron MultiPlus 48V/3000W/35A-16 inverter/charger
Victron MultiPlus 48V/3000W/35A-16 – inverter and battery charger in one unitThe Victron MultiPlus 48V/3000W/35A-16 is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies your installation with pure sine wave 230V and switches automatically between shore power and battery operation.Benefits PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the fuse at the campsite or marina from blowing. Pure sine wave: The same power quality as the mains grid — also for sensitive electronics. Applications Motorhomes and boats where both shore power and battery operation need to be handled automatically. Off-grid and hybrid systems with solar panels and a generator. Backup power systems and energy storage in homes and businesses. Specifications Specification Details Nominal voltage 48 V Weight 20 kg Dimensions (h × w × d) 218 × 258 × 362 mm Item number PMP483020001 Download datasheet (PDF)
$1,025.00
You have seen 360 out of 905 products