Victron SmartSolar MPPT 100/30 – MPPT solar charge controller for efficient solar chargingThe Victron SmartSolar MPPT 100/30 is an MPPT solar charge controller from Victron Energy for 12V and 24V battery banks. It delivers up to 30 A of charging current, handles a PV open-circuit voltage of up to 100 V, and built-in Bluetooth allows you to monitor operation and change settings directly from the VictronConnect app.Benefits
Up to 30 A charging current: Handles 440 W at 12V and 880 W at 24V solar panel power.
Built-in Bluetooth: Setup, monitoring, and firmware updates take place wirelessly in the VictronConnect app — no extra display required.
Up to 98% efficiency: The MPPT tracker continuously adjusts the operating point so that the panels perform at their best in changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12V or 24V.
Multiple charging algorithms and user-defined profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 100 V PV open-circuit voltage: Gives you the freedom to connect multiple panels in series and use longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be installed in technical rooms, boats, motorhomes, and site huts.
Application
Motorhomes, caravans, and vans with roof-mounted solar panels.
Boats where the service battery needs to be kept fully charged throughout the season.
Summer houses, allotment gardens, and site huts without a grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V or 24V
Nominal charging current
30 A
Nominal solar power, 12V
440 W
Nominal solar power, 24V
880 W
Max. PV open-circuit voltage
100 V
Max. PV short-circuit current
35 A
Max. efficiency
98 %
Self-consumption
12V: 30 mA / 24V: 20 mA
Charging algorithm
Multi-stage adaptive (eight pre-programmed algorithms) or user-defined algorithm
Charging voltage absorption
14.4 V / 28.8 V (adjustable)
Charging voltage float
13.8 V / 27.6 V (adjustable)
Charging voltage equalization
16.2 V / 28.8 V (adjustable)
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C
Protection
Output short circuit, overtemperature
Operating temperature
-30 °C to +60 °C (full performance up to 40 °C)
Humidity
95 %, non-condensing
Max. altitude
5000 m (full performance up to 2000 m)
Ambient conditions
Indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port 4 / Bluetooth, via VictronConnect app
Color
blue (RAL 5012)
Power terminals
16 mm² / AWG6
Protection class
IP43 (electronics), IP22 (connection area)
Weight
1.3 kg
Dimensions (h × w × d)
130 × 186 × 70 mm
Safety
EN/IEC 62109-1, UL 1741, CSA C22.2
Nominal voltage
12/24/48 V
Part number
SCC110030210
Download datasheet (PDF)
Victron SmartSolar MPPT 100/20 – MPPT solar charge controller for efficient solar chargingThe Victron SmartSolar MPPT 100/20 is an MPPT solar charge controller from Victron Energy for 12V, 24V, or 48V battery banks. It regulates the output of the solar panels, handles a PV open-circuit voltage of up to 100 V, and built-in Bluetooth allows you to monitor operation and change settings directly from the VictronConnect app.Advantages
Built-in Bluetooth: Setup, monitoring, and firmware updates are performed wirelessly in the VictronConnect app — no extra display required.
Up to 98% efficiency: The MPPT tracker continuously adjusts the operating point so that the panels perform optimally under changing light conditions.
Automatic voltage detection: The controller automatically detects whether the battery bank is 12V, 24V, or 48V.
Multiple charging algorithms and user-defined profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 100 V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and use longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be installed in technical rooms, boats, motorhomes, and caravans.
Applications
Motorhomes, caravans, and vans with roof-mounted solar panels.
Boats, where the service battery needs to be kept fully charged throughout the season.
Summer houses, allotments, and site huts without a fixed grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V, 24V, or 48V
Max. battery current
20 A
Nominal PV power, 12V
290 W
Nominal PV power, 24V
580 W
Nominal PV power, 48V
1160 W
Max. PV short-circuit current
20 A
Automatic load disconnect
Yes
Max. PV open-circuit voltage
100 V
Max. efficiency
98 %
Self-consumption
12V: 25 mA / 24V / 48V: 15 mA
Charge voltage absorption
14.4 V / 28.8 V / 57.6 V (adjustable)
Charge voltage float
13.8 V / 27.6 V / 55.2 V (adjustable)
Charge voltage equalization
16.2 V / 32.4 V / 64.8 V (adjustable)
Charging algorithm
Multi-stage adaptive or user-defined algorithm
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C / 48V: -64 mV/°C
Continuous load current
12V & 24V: 20 A / 48V: 1 A
Low voltage load disconnect
11.1 V / 22.2 V / 44.4 V or 11.8 V / 23.6 V / 47.2 V or BatteryLife algorithm
Low voltage load reconnect
13.1 V / 26.2 V / 52.4 V or 14 V / 28 V / 56 V or BatteryLife algorithm
Protection
PV reverse polarity, output short-circuit, over-temperature
Operating temperature
-30 °C to +60 °C (full performance up to 40 °C)
Humidity
100 %, non-condensing
Max. altitude
5000 m (full performance up to 2000 m)
Environmental conditions
indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port 4 / Bluetooth, via VictronConnect app
Color
blue (RAL 5012)
Power terminals
6 mm² / AWG10
Protection class
IP43 (electronics), IP22 (connection area)
Weight
0.65 kg
Dimensions (h × w × d)
100 × 131 × 60 mm
Safety
EN/IEC 62109-1 / UL 1741 / CSA C22.2 NO.107,1-16
Nominal voltage
12/24/48 V
Part number
SCC110020160R
Download datasheet (PDF)
Victron BlueSolar MPPT 100/50 – MPPT solar charge controller for efficient solar chargingThe Victron BlueSolar MPPT 100/50 is an MPPT solar charge controller from Victron Energy for 12V and 24V battery banks. It delivers up to 50 A of charging current and handles a PV open-circuit voltage of up to 100 V.Benefits
Up to 50 A charging current: Handles 700 W at 12V and 1400 W at 24V solar power.
Up to 98% efficiency: The MPPT tracking continuously adjusts the operating point so that the panels perform optimally under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12V or 24V.
Multiple charging algorithms and user-defined profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 100 V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and run longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be mounted in technical rooms, boats, campers, and caravans.
Application
Camper, caravan, and van with roof-mounted solar panels.
Boat, where the service battery needs to be kept fully charged throughout the season.
Summer house, allotment garden, and mobile home without a permanent grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V or 24V
Rated charging current
50 A
Rated solar power, 12V
700 W
Rated solar power, 24V
1400 W
Max. PV open-circuit voltage
100 V
Max. PV short-circuit current
60 A
Max. efficiency
98 %
Self-consumption
12V: 30 mA / 24V: 20 mA
Charging algorithm
Multi-stage adaptive (eight pre-programmed algorithms) or user-defined algorithm
Absorption charge voltage
14.4 V / 28.8 V (adjustable)
Float charge voltage
13.8 V / 27.6 V (adjustable)
Equalization charge voltage
16.2 V / 28.8 V (adjustable)
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C
Protection
short circuit on output, over-temperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
95 %, non-condensing
Max. altitude
5000 m (full output up to 2000 m)
Ambient conditions
indoor, unheated (type 1)
Pollution degree
PD2
Data communication
VE.Direct port
Color
blue (RAL 5012)
Power terminals
16 mm² / AWG6
Enclosure class
IP43 (electronics), IP22 (connection area)
Weight
1.3 kg
Dimensions (h × w × d)
130 × 186 × 70 mm
Safety
EN/IEC 62109-1, UL 1741, CSA C22.2
Rated voltage
12/24/48 V
Part number
SCC020050200
Download datasheet (PDF)
Victron BlueSolar MPPT 100/30 – MPPT solar charge controller for efficient solar chargingThe Victron BlueSolar MPPT 100/30 is an MPPT solar charge controller from Victron Energy for 12V and 24V battery banks. It delivers up to 30 A of charging current and handles a PV open-circuit voltage of up to 100 V.Advantages
Up to 30 A charging current: Handles 440 W at 12V and 880 W at 24V solar power.
Up to 98% efficiency: The MPPT tracking continuously adjusts the operating point so the panels perform optimally under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12V or 24V.
Multiple charging algorithms and user-defined profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 100 V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and use longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be mounted in technical rooms, boats, campers, and site huts.
Application
Camper, caravan, and van with a solar panel on the roof.
Boat, where the service battery needs to be kept fully charged throughout the season.
Summer cottage, allotment garden, and site hut without fixed grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V or 24V
Rated charging current
30 A
Rated solar power, 12V
440 W
Rated solar power, 24V
880 W
Max. PV open-circuit voltage
100 V
Max. PV short-circuit current
35 A
Max. efficiency
98 %
Self-consumption
12V: 30 mA / 24V: 20 mA
Charging algorithm
Multi-stage adaptive (eight pre-programmed algorithms) or user-defined algorithm
Absorption charge voltage
14.4 V / 28.8 V (adjustable)
Float charge voltage
13.8 V / 27.6 V (adjustable)
Equalization charge voltage
16.2 V / 28.8 V (adjustable)
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C
Protection
Output short circuit, over-temperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
95 %, non-condensing
Max. altitude
5000 m (full output up to 2000 m)
Environmental conditions
Indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port
Color
blue (RAL 5012)
Power terminals
16 mm² / AWG6
Protection class
IP43 (electronics), IP22 (connection area)
Weight
1.3 kg
Dimensions (h × w × d)
130 × 186 × 70 mm
Safety
EN/IEC 62109-1, UL 1741, CSA C22.2
Rated voltage
12/24/48 V
Item number
SCC020030200
Download datasheet (PDF)
Victron BlueSolar MPPT 100/20 – MPPT solar charge controller for efficient solar chargingThe Victron BlueSolar MPPT 100/20 is an MPPT solar charge controller from Victron Energy for 12V, 24V, or 48V battery banks. It regulates the performance of solar panels and handles a PV open-circuit voltage of up to 100 V.Advantages
Up to 98% efficiency: The MPPT tracking continuously adjusts the operating point so that the panels perform optimally under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12V, 24V, or 48V.
Multiple charging algorithms and custom profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 100 V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and run longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be mounted in technical rooms, boats, motorhomes, and site trailers.
Application
Motorhomes, caravans, and vans with solar panels on the roof.
Boats where the service battery needs to be kept fully charged throughout the season.
Summer cottages, allotments, and site trailers without a fixed grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V, 24V, or 48V
Max. battery current
20 A
Rated solar power, 12V
290 W
Rated solar power, 24V
580 W
Rated solar power, 48V
1160 W
Max. PV short-circuit current
20 A
Automatic load disconnect
Yes
Max. PV open-circuit voltage
100 V
Max. efficiency
98 %
Self-consumption
12V: 25 mA / 24V / 48V: 15 mA
Absorption charge voltage
14.4 V / 28.8 V / 57.6 V (adjustable)
Float charge voltage
13.8 V / 27.6 V / 55.2 V (adjustable)
Equalization charge voltage
16.2 V / 32.4 V / 64.8 V (adjustable)
Charging algorithm
Multi-stage adaptive or custom algorithm
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C / 48V: -64 mV/°C
Continuous load current
12V & 24V: 20 A / 48V: 1 A
Low voltage load disconnect
11.1 V / 22.2 V / 44.4 V or 11.8 V / 23.6 V / 47.2 V or BatteryLife algorithm
Low voltage load reconnect
13.1 V / 26.2 V / 52.4 V or 14 V / 28 V / 56 V or BatteryLife algorithm
Protection
PV reverse polarity, output short-circuit, over-temperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
100 %, non-condensing
Max. altitude
5000 m (full output up to 2000 m)
Environmental conditions
indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port
Color
blue (RAL 5012)
Power terminals
6 mm² / AWG10
Ingress protection rating
IP43 (electronics), IP22 (connection area)
Weight
0.65 kg
Dimensions (h × w × d)
100 × 131 × 60 mm
Safety
EN/IEC 62109-1 / UL 1741 / CSA C22.2 NO.107.1-16
Nominal voltage
12/24/48 V
Item number
SCC110020170R
Download datasheet (PDF)
Victron BlueSolar MPPT 100/15 – MPPT solar charge controller for efficient solar chargingThe Victron BlueSolar MPPT 100/15 is an MPPT solar charge controller from Victron Energy for 12V, 24V, or 48V battery banks. It regulates the output of the solar panels and handles a PV open-circuit voltage of up to 100 V.Advantages
Up to 98% efficiency: The MPPT tracking continuously adjusts the operating point so that the panels perform optimally under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12V, 24V, or 48V.
Multiple charging algorithms and user-defined profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 100 V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and run longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be mounted in technical rooms, boats, campers, and site caravans.
Application
Camper, caravan, and van with a solar panel on the roof.
Boat, where the service battery needs to be kept fully charged throughout the season.
Summer house, allotment garden, and site caravan without a fixed grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V, 24V, or 48V
Max. battery current
15 A
Nominal solar power, 12V
220 W
Nominal solar power, 24V
440 W
Max. PV short-circuit current
15 A
Automatic load disconnect
Yes
Max. PV open-circuit voltage
100 V
Max. efficiency
98 %
Self-consumption
12V: 25 mA / 24V / 48V: 15 mA
Absorption charge voltage
14.4 V / 28.8 V / 57.6 V (adjustable)
Float charge voltage
13.8 V / 27.6 V / 55.2 V (adjustable)
Equalization charge voltage
16.2 V / 32.4 V / 64.8 V (adjustable)
Charge algorithm
Multi-stage adaptive or user-defined algorithm
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C / 48V: -64 mV/°C
Continuous load current
12V & 24V: 20 A / 48V: 1 A
Low voltage load disconnect
11.1 V / 22.2 V / 44.4 V or 11.8 V / 23.6 V / 47.2 V or BatteryLife algorithm
Low voltage load reconnect
13.1 V / 26.2 V / 52.4 V or 14 V / 28 V / 56 V or BatteryLife algorithm
Protection
PV reverse polarity, output short circuit, over-temperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
100 %, non-condensing
Max. altitude
5000 m (full output up to 2000 m)
Environmental conditions
indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port
Color
blue (RAL 5012)
Power terminals
6 mm² / AWG10
Protection class
IP43 (electronics), IP22 (connection area)
Weight
0.65 kg
Dimensions (h × w × d)
100 × 131 × 60 mm
Safety
EN/IEC 62109-1 / UL 1741 / CSA C22.2 NO.107,1-16
Nominal voltage
12/24 V
Item number
SCC010015200R
Download datasheet (PDF)
Victron BlueSolar MPPT 75/15 – MPPT solar charge controller for efficient solar chargingThe Victron BlueSolar MPPT 75/15 is an MPPT solar charge controller from Victron Energy for 12V, 24V, or 48V battery banks. It regulates the performance of solar panels and handles a PV open-circuit voltage of up to 100 V.Advantages
Up to 98% efficiency: The MPPT tracking continuously adjusts the operating point so that the panels perform optimally under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12V, 24V, or 48V.
Multiple charging algorithms and custom profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 100 V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and run longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be mounted in technical rooms, boats, campervans, and site huts.
Application
Campervans, caravans, and vans with roof-mounted solar panels.
Boats, where the service battery needs to be kept fully charged throughout the season.
Summer cottages, allotments, and site huts without a fixed grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V, 24V, or 48V
Max. battery current
15 A
Nominal solar power, 12V
220 W
Nominal solar power, 24V
440 W
Max. PV short-circuit current
15 A
Automatic load disconnect
Yes
Max. PV open-circuit voltage
100 V
Max. efficiency
98 %
Self-consumption
12V: 25 mA / 24V / 48V: 15 mA
Absorption charging voltage
14.4 V / 28.8 V / 57.6 V (adjustable)
Float charging voltage
13.8 V / 27.6 V / 55.2 V (adjustable)
Equalization charging voltage
16.2 V / 32.4 V / 64.8 V (adjustable)
Charging algorithm
Multi-stage adaptive or user-defined algorithm
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C / 48V: -64 mV/°C
Continuous load current
12V & 24V: 20 A / 48V: 1 A
Low voltage load disconnect
11.1 V / 22.2 V / 44.4 V or 11.8 V / 23.6 V / 47.2 V or BatteryLife algorithm
Low voltage load reconnect
13.1 V / 26.2 V / 52.4 V or 14 V / 28 V / 56 V or BatteryLife algorithm
Protection
PV reverse polarity, output short-circuit, over-temperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
100 %, non-condensing
Max. altitude above sea level
5000 m (full output up to 2000 m)
Environmental conditions
indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port
Colour
blue (RAL 5012)
Power terminals
6 mm² / AWG10
Enclosure class
IP43 (electronics), IP22 (connection area)
Weight
0.6 kg
Dimensions (h × w × d)
100 × 113 × 50 mm
Safety
EN/IEC 62109-1 / UL 1741 / CSA C22.2 NO.107,1-16
Nominal voltage
12/24 V
Item number
SCC010015050R
Download datasheet (PDF)
Victron BlueSolar MPPT 75/10 – MPPT solar charge controller for efficient solar chargingThe Victron BlueSolar MPPT 75/10 is an MPPT solar charge controller from Victron Energy for 12V and 24V battery banks. It regulates the output of the solar panels and handles a PV open-circuit voltage of up to 75 V.Benefits
Up to 98% efficiency: The MPPT tracking continuously adjusts the operating point so that the panels perform optimally under changing light conditions.
Automatic voltage detection: The controller automatically detects whether the battery bank is 12V or 24V.
Multiple charging algorithms and user-defined profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 75 V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and run longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be installed in utility rooms, boats, motorhomes, and site huts.
Application
Motorhome, caravan, and van with a solar panel on the roof.
Boat, where the service battery needs to be kept topped up throughout the season.
Summer house, allotment garden, and site hut without a permanent grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V or 24V
Max. battery current
10 A
Rated solar power, 12V
145 W
Rated solar power, 24V
290 W
Max. PV short-circuit current
10 A
Automatic load disconnect
Yes
Max. PV open-circuit voltage
75 V
Max. efficiency
98%
Self-consumption
12V: 20 mA / 24V: 10 mA
Absorption charge voltage
14.4 V / 28.8 V / 57.6 V (adjustable)
Float charge voltage
13.8 V / 27.6 V / 55.2 V (adjustable)
Equalization charge voltage
16.2 V / 32.4 V / 64.8 V (adjustable)
Charge algorithm
Multi-stage adaptive or user-defined algorithm
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C / 48V: -64 mV/°C
Continuous load current
15 A
Low voltage load disconnect
11.1 V / 22.2 V / 44.4 V or 11.8 V / 23.6 V / 47.2 V or BatteryLife algorithm
Low voltage load reconnect
13.1 V / 26.2 V / 52.4 V or 14 V / 28 V / 56 V or BatteryLife algorithm
Protection
PV reverse polarity, output short-circuit, over-temperature
Operating temperature
-30 °C to +60 °C (full performance up to 40 °C)
Humidity
100%, non-condensing
Max. altitude
5000 m (full performance up to 2000 m)
Environmental conditions
indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port
Colour
blue (RAL 5012)
Power terminals
6 mm² / AWG10
Protection class
IP43 (electronics), IP22 (connection area)
Weight
0.5 kg
Dimensions (h × w × d)
100 × 113 × 40 mm
Safety
EN/ IEC 62109-1 / UL 1741 / CSA C22.2 NO.107,1-16
Rated voltage
12/24 V
Item number
SCC010010050R
Download datasheet (PDF)
Victron SmartSolar MPPT 100/15 – MPPT solar charge controller for efficient solar chargingThe Victron SmartSolar MPPT 100/15 is an MPPT solar charge controller from Victron Energy for 12V, 24V, or 48V battery banks. It regulates solar panel output, handles a PV open-circuit voltage of up to 100 V, and built-in Bluetooth allows you to monitor operation and change settings directly from the VictronConnect app.Advantages
Built-in Bluetooth: Setup, monitoring, and firmware updates are performed wirelessly in the VictronConnect app — without an additional display.
Up to 98% efficiency: The MPPT tracking continuously adjusts the operating point so the panels perform optimally under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12V, 24V, or 48V.
Multiple charging algorithms and custom profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 100 V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and run longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be mounted in technical rooms, boats, motorhomes, and caravans.
Application
Motorhome, caravan, and van with a solar panel on the roof.
Boat, where the service battery needs to be kept fully charged throughout the season.
Summer house, allotment garden, and caravan without a fixed grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V, 24V, or 48V
Max. battery current
15 A
Nominal solar power, 12V
220 W
Nominal solar power, 24V
440 W
Max. PV short-circuit current
15 A
Automatic load disconnect
Yes
Max. PV open-circuit voltage
100 V
Max. efficiency
98 %
Self-consumption
12V: 25 mA / 24V / 48V: 15 mA
Charge voltage absorption
14.4 V / 28.8 V / 57.6 V (adjustable)
Charge voltage float
13.8 V / 27.6 V / 55.2 V (adjustable)
Charge voltage equalization
16.2 V / 32.4 V / 64.8 V (adjustable)
Charge algorithm
Multi-stage adaptive or custom algorithm
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C / 48V: -64 mV/°C
Continuous load current
12V & 24V: 20 A / 48V: 1 A
Low voltage load disconnect
11.1 V / 22.2 V / 44.4 V or 11.8 V / 23.6 V / 47.2 V or BatteryLife algorithm
Low voltage load reconnect
13.1 V / 26.2 V / 52.4 V or 14 V / 28 V / 56 V or BatteryLife algorithm
Protection
PV reverse polarity, output short circuit, overtemperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
100 %, non-condensing
Max. altitude
5000 m (full output up to 2000 m)
Environmental conditions
indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port 4 / Bluetooth, via VictronConnect app
Color
blue (RAL 5012)
Power terminals
6 mm² / AWG10
Protection class
IP43 (electronics), IP22 (connection area)
Weight
0.65 kg
Dimensions (h × w × d)
100 × 131 × 60 mm
Safety
EN/IEC 62109-1 / UL 1741 / CSA C22.2 NO.107,1-16
Nominal voltage
12/24 V
Part number
SCC110015060R
Download datasheet (PDF)
Victron SmartSolar MPPT 75/15 – MPPT solar charge controller for efficient solar chargingThe Victron SmartSolar MPPT 75/15 is an MPPT solar charge controller from Victron Energy for 12V, 24V, or 48V battery banks. It regulates solar panel performance, handles a PV open-circuit voltage of up to 100 V, and built-in Bluetooth allows you to monitor operation and change settings directly from the VictronConnect app.Advantages
Built-in Bluetooth: Setup, monitoring, and firmware updates are done wirelessly in the VictronConnect app — without the need for an additional display.
Up to 98% efficiency: The MPPT tracker continuously adjusts the operating point so that the panels perform optimally under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12V, 24V, or 48V.
Multiple charging algorithms and custom profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 100 V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and use longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Suitable for mounting in utility rooms, boats, motorhomes, and site huts.
Application
Motorhome, caravan, and van with a solar panel on the roof.
Boat where the service battery needs to be kept fully charged throughout the season.
Summer house, allotment garden, and site hut without a permanent grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V, 24V, or 48V
Max. battery current
15 A
Rated solar power, 12V
220 W
Rated solar power, 24V
440 W
Max. PV short-circuit current
15 A
Automatic load disconnect
Yes
Max. PV open-circuit voltage
100 V
Max. efficiency
98 %
Self-consumption
12V: 25 mA / 24V / 48V: 15 mA
Charging voltage absorption
14.4 V / 28.8 V / 57.6 V (adjustable)
Charging voltage float
13.8 V / 27.6 V / 55.2 V (adjustable)
Charging voltage equalization
16.2 V / 32.4 V / 64.8 V (adjustable)
Charging algorithm
Multi-stage adaptive or custom algorithm
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C / 48V: -64 mV/°C
Continuous load current
12V & 24V: 20 A / 48V: 1 A
Low voltage load disconnect
11.1 V / 22.2 V / 44.4 V or 11.8 V / 23.6 V / 47.2 V or BatteryLife algorithm
Low voltage load reconnect
13.1 V / 26.2 V / 52.4 V or 14 V / 28 V / 56 V or BatteryLife algorithm
Protection
PV reverse polarity, output short circuit, over-temperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
100 %, non-condensing
Max. altitude
5000 m (full output up to 2000 m)
Environmental conditions
indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port 4 / Bluetooth, via VictronConnect app
Color
blue (RAL 5012)
Power terminals
6 mm² / AWG10
Enclosure rating
IP43 (electronics), IP22 (connection area)
Weight
0.6 kg
Dimensions (h × w × d)
100 × 113 × 50 mm
Safety
EN/IEC 62109-1 / UL 1741 / CSA C22.2 NO.107,1-16
Nominal voltage
12/24 V
Item number
SCC075015060R
Download datasheet (PDF)
Victron SmartSolar MPPT 75/10 – MPPT solar charge controller for efficient solar chargingThe Victron SmartSolar MPPT 75/10 is an MPPT solar charge controller from Victron Energy for 12V and 24V battery banks. It regulates solar panel performance, handles a PV open-circuit voltage of up to 75V, and built-in Bluetooth allows you to monitor operation and change settings directly from the VictronConnect app.Advantages
Built-in Bluetooth: Set up, monitor, and update firmware wirelessly in the VictronConnect app — no extra display required.
Up to 98% efficiency: MPPT tracking continuously adjusts the operating point so panels perform optimally under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12V or 24V.
Multiple charging algorithms and custom profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 75V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and run longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be installed in technical rooms, boats, motorhomes, and site trailers.
Application
Motorhome, caravan, and van with roof-mounted solar panel.
Boats, where the service battery needs to be kept fully charged throughout the season.
Summer house, allotment garden, and site trailer without a fixed grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V or 24V
Max. battery current
10 A
Rated solar power, 12V
145 W
Rated solar power, 24V
290 W
Max. PV short-circuit current
10 A
Automatic load disconnect
Yes
Max. PV open-circuit voltage
75 V
Max. efficiency
98 %
Self-consumption
12V: 20 mA / 24V: 10 mA
Absorption charge voltage
14.4 V / 28.8 V / 57.6 V (adjustable)
Float charge voltage
13.8 V / 27.6 V / 55.2 V (adjustable)
Equalization charge voltage
16.2 V / 32.4 V / 64.8 V (adjustable)
Charging algorithm
Multi-stage adaptive or custom algorithm
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C / 48V: -64 mV/°C
Continuous load current
15 A
Low voltage load disconnect
11.1 V / 22.2 V / 44.4 V or 11.8 V / 23.6 V / 47.2 V or BatteryLife algorithm
Low voltage load reconnect
13.1 V / 26.2 V / 52.4 V or 14 V / 28 V / 56 V or BatteryLife algorithm
Protection
PV reverse polarity, output short-circuit, overtemperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
100 %, non-condensing
Max. altitude
5000 m (full output up to 2000 m)
Environmental conditions
indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port / Bluetooth, via VictronConnect app
Color
blue (RAL 5012)
Power terminals
6 mm² / AWG10
Protection class
IP43 (electronics), IP22 (connection area)
Weight
0.5 kg
Dimensions (h × w × d)
100 × 113 × 40 mm
Safety
EN/IEC 62109-1 / UL 1741 / CSA C22.2 NO.107.1-16
Nominal voltage
12/24 V
Item number
SCC075010060R
Download datasheet (PDF)
Victron 12V 110Ah Gel Deep Cycle battery – maintenance-free lead-acid batteryThe Victron 12V 110Ah Gel Deep Cycle battery is a maintenance-free lead-acid battery from Victron Energy with a capacity of 110 Ah and a nominal voltage of 12 V. It is built as a service battery for repeated charging and discharging and can be installed in enclosed spaces thanks to its very low gas emission.Advantages
Capacity 110 Ah: Solid capacity for daily use.
Nominal voltage 12 V: Standard voltage for motorhomes, boats, and solar power systems.
Maintenance-free: Sealed construction — no water refilling and no free acid.
Withstands deep discharge: Designed as a service battery for repeated charging and discharging.
Can be installed in enclosed spaces: Very low gas emission during normal charging.
Application
Service battery for motorhomes, caravans, and boats.
Backup and emergency power systems.
Solar power systems where high operational reliability is required.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
110 Ah
Weight
33 kg
Technology
GEL
Dimensions (h × w × d)
220 × 171 × 330 mm
Item number
BAT412101104
Lithium Battery Capacity Tester / Voltmeter – 8–63V LCD DisplayA compact and user-friendly battery capacity tester designed for monitoring lithium batteries, including LiFePO4, Li-ion, and other 3.2V–3.7V cell types. By measuring both voltage and battery level as a percentage, the device provides a quick and reliable overview of the battery's condition – suitable for e-bikes, solar panels, power banks, small battery banks, and DIY projects.Advantages
Voltage measurement from 8V to 63V: Supports most lithium battery packs from 3S up to 16S (e.g., 12V, 24V, 36V, 48V, 60V)
Capacity indicator: Shows battery level both numerically (%) and graphically via a battery icon
Automatic detection: Automatically identifies battery voltage and adjusts the display
Easy-to-read LCD display: Backlit screen that clearly shows voltage and capacity even in low light
Compact and easy to install: Simple integration into housings, battery boxes, and front panels
Specifications
Specification
Details
Voltage range
8–63V DC
Compatible battery types
LiFePO4, Li-ion (3S–16S)
Display type
LCD with backlight
Measurement data
Voltage (V), capacity (%)
Operating temperature
-10°C to +60°C
Installation
Flush mount (panel cutout)
Color
Black
Cable connection
2-pin connector
Heltec 2-16S 2A Active BalancerThis Heltec 2-16S 2A Active Balancer is designed to ensure optimal balancing of cells in Li-ion and LiFePO4 battery packs with up to 16 cells. The balancer adjusts the voltage level between the battery cells and ensures they are kept at the same level, which extends the battery's lifespan and improves performance.Benefits
Supports 2–16 cells: Flexible for various battery configurations
2A active balancing: Quickly equalizes voltage differences between cells
Improves cell lifespan: Prevents over- and undercharging of individual cells
Low power consumption: Energy-efficient and suitable for long-term use
Easy installation: Compact and easy to connect to existing battery systems
ApplicationsSuitable for Li-ion and LiFePO4 battery packs in solar energy systems, electric vehicles, energy storage systems, and other applications where stable cell balancing is critical.
Victron Phoenix Inverter Control – remote control panel for Phoenix invertersVictron Phoenix Inverter Control is a remote control panel for Victron Phoenix inverters that have a UTP socket for remote monitoring and control. With the panel, you can operate the inverter and follow its status via LEDs from a location other than where the inverter is mounted.Benefits
Remote operation: Control the inverter from a visible and convenient location, even if the inverter itself sits in a cabinet, engine room or plant room.
Status via LEDs: The LEDs show the inverter's status, and their brightness is dimmed automatically at night.
Can also be used with MultiPlus: The panel can be used on a MultiPlus if you only want the inverter and automatic transfer switch – without the charger function.
Applications
Boats, motorhomes and buses where the Phoenix inverter is mounted out of reach.
Fixed installations where the inverter needs to be operated from a central control panel.
Specifications
Specification
Details
Type
Remote control panel
Connection
UTP socket for remote control on the inverter
Compatible inverters
Phoenix 12/1200, 12/1600, 12/2000, 12/3000, 12/5000, 24/1200, 24/1600, 24/2000, 24/3000, 24/5000, 48/3000 and 48/5000
Not for
Phoenix inverters with VE.Direct – for these, use the Phoenix Inverter Control VE.Direct
Item number
REC030001210
See the product page at Victron Energy
Victron SmartSolar Pluggable display – original Victron accessoryThe Victron SmartSolar Pluggable display is an original accessory from Victron Energy. It fits directly into the Victron system and is built to withstand demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits directly into the Victron system without any modifications.
Reliable quality: Materials and workmanship built to last in marine and vehicle environments.
Applications
Original accessory that fits directly into the Victron system.
Motorhomes, boats, summer cottages, and off-grid systems.
Safe and stable installation.
Specifications
Specification
Details
Part number
victron-smartsolar-pluggable-display-c160b6
Feed-through Terminal Set – Red and Black 1000A (M10) with Protective CapsProfessional feed-through terminal set for battery boxes and power enclosures, designed for high-current applications up to 1000A. The set consists of one red and one black terminal, which are mounted through an enclosure or wall, allowing for secure and sealed cable connection from the outside.Each terminal is made of tin-plated copper with low contact resistance and high conductivity. Rubber sealing gaskets ensure IP-rated mounting through the wall, and the protective caps safeguard against accidental contact and short circuits. Suitable for all types of DC systems from 12V up to 72V.Specifications
Specification
Details
Set
2 pcs. – 1 x red + 1 x black terminal
Load
Up to 1000A with correct installation
Thread
M10
Material
Tin-plated copper and insulated plastic
Connection type
Flat terminal (8 mm hole) with bolt fastening
Included
2 x protective caps (red/black), 2 x sealing gaskets, bolts, nuts
Benefits
Up to 1000A load: Handles even large currents – suitable for powerful lithium batteries and inverter installations
Tight and secure mounting: Gaskets and bolt feed-through ensure high mechanical strength and IP sealing
Insulated protective caps included: Protects against short circuits and provides clear polarity marking
Universal compatibility: Fits all LithiumPro DIY enclosures and batteries, as well as custom solutions
Complete set: Everything included – terminals, nuts, gaskets, and protective caps
Note: The set is intended for professional battery assembly and should be installed with correct voltage and insulation.
Raco SC70-8 Cable LugThe SC70-8 cable lug is a non-insulated ring terminal manufactured from tinned copper. Designed for professional use to connect cables with a cross-section of approx. 70 mm² to studs with an M8 bolt hole. Suitable for high-power electrical connections, battery terminals, earthing connections, and other high-current applications.Advantages
High conductivity: Copper with tin plating ensures low resistance and minimal loss at high currents
Corrosion resistance: Tinned surface protects against oxidation, which is important in humid or aggressive environments
Robust and durable: Ring-shaped coupling provides a strong and secure mechanical connection
Versatile application: Can be used in both AC and DC applications
Specifications
Parameter
Value
Cable cross-section
Approx. 70 mm²
Bolt hole (stud)
M8
Inner diameter of bolt hole
8 mm
Material
Copper (Cu), tinned/nickel-plated surface for improved corrosion resistance
Surface finish
Electrolytic tin-plated (Sn) – reduces oxidation and ensures good electrical contact
Temperature limit
Up to approx. +120°C during operation (depends on cable type and load)
Electrical classification
IEC-60228 or equivalent standards for conductor class
Mounting method
Crimping is recommended. Soldering can be used, but crimping provides a more uniform and durable connection
Fields of application
Electrical cabinets and control panels
Battery systems and charging infrastructure
Solar installations
Marine and automation systems
Earthing and power installations
Recommendations
Use the correct crimping tool and ensure the crimp covers the entire conductor of the cable end
For high currents: ensure that the cable dimension and number of conductors match the load to avoid overloading
Check the bolt and nut for proper fit – too much clearance can result in poor contacts
For installations exposed to moisture or aggressive environments, additional protection such as sealing or coating is recommended
Raco SC25-10 Cable LugThe SC25-10 cable lug type is a non-insulated ring terminal manufactured from tinned copper. Designed for professional use to connect cables with a cross-section of approx. 25 mm² to studs with an M10 bolt hole. Suitable for heavy-duty electrical connections, battery terminals, earthing connections, and other high-current applications.Advantages
High conductivity: Tin-coated copper ensures low resistance and minimal loss at high current levels
Corrosion resistance: Tinned surface protects against oxidation, which is important in humid or aggressive environments
Robust and durable: Ring-shaped coupling provides a strong and secure mechanical connection
Versatile application: Can be used in both AC and DC applications
Specifications
Parameter
Value
Cable cross-section
Approx. 25 mm²
Bolt hole (stud)
M10
Inner diameter of bolt hole
10 mm
Material
Copper (Cu), tinned/nickel-plated surface for better corrosion resistance
Surface finish
Electrolytic tin-plated (Sn) – reduces oxidation and ensures good electrical contact
Temperature limit
Up to approx. +120°C during operation (depends on cable type and load)
Electrical classification
IEC-60228 or equivalent conductor class standards
Mounting method
Crimping is recommended. Soldering can be used, but crimping provides a more uniform and durable connection
Areas of application
Electrical switchboards and control panels
Battery systems and charging infrastructure
Solar installations
Marine and automation systems
Grounding and power installations
Recommendations
Use the correct crimping tool and ensure the crimp covers the entire conductor of the cable end
For high current levels: ensure that cable dimension and number of conductors match the load to avoid overloading
Check the bolt and nut for proper fit – excessive clearance can lead to poor contacts
For installations exposed to humidity or aggressive environments, additional protection such as sealing or coating is recommended
Raco SC50-8 Cable LugThe SC50-8 cable lug is a non-insulated ring terminal made of tinned copper. Designed for professional use, it connects cables with a cross-section of approx. 50 mm² to studs with an M8 bolt hole. Suitable for high-power electrical connections, battery terminals, earthing connections, and other high-current applications.Advantages
High conductivity: Tin-plated copper ensures low resistance and minimal loss at high currents
Corrosion resistance: Tinned surface protects against oxidation, which is important in humid or aggressive environments
Robust and durable: Ring-shaped coupling provides a strong and secure mechanical connection
Versatile application: Can be used in both AC and DC applications
Specifications
Parameter
Value
Cable cross-section
Approx. 50 mm²
Bolt hole (stud)
M8
Inner diameter of the bolt hole
8 mm
Material
Copper (Cu), tinned/nickel-plated surface for better corrosion resistance
Surface finish
Electrolytic tinning (Sn) – reduces oxidation and ensures good electrical contact
Temperature limit
Up to approx. +120°C during operation (depends on cable type and load)
Electrical classification
IEC-60228 or equivalent conductor class standards
Mounting method
Pressing/crimping is recommended. Soldering can be used, but crimping provides a more uniform and durable connection
Areas of application
Electrical cabinets and control panels
Battery systems and charging infrastructure
Solar installations
Marine and automation systems
Earthing and power installations
Recommendations
Use the correct crimping tool and ensure the crimp covers the entire conductor end
For high currents: ensure that the cable dimension and number of conductors match the load to avoid overloading
Check the bolt and nut for proper fit – too much clearance can result in poor contacts
For installations exposed to moisture or aggressive environments, additional protection such as sealing or coating is recommended
Raco SC35-8 Cable LugThe SC35-8 cable lug is a non-insulated ring terminal made of tinned copper. Designed for professional use to connect cables with a cross-section of approx. 35 mm² to studs with an M8 bolt hole. Suitable for heavy-duty electrical connections, battery terminals, grounding, and other high-current applications.Advantages
High conductivity: Tin-coated copper ensures low resistance and minimal loss at high currents
Corrosion resistance: Tinned surface protects against oxidation, which is important in humid or aggressive environments
Robust and durable: Ring-shaped coupling provides a strong and secure mechanical connection
Versatile application: Can be used in both AC and DC applications
Specifications
Parameter
Value
Cable cross-section
Approx. 35 mm²
Bolt hole (stud)
M8
Inside diameter of bolt hole
8 mm
Material
Copper (Cu), tinned/nickel-plated surface for better corrosion resistance
Surface finish
< td colspan="1" rowspan="1">Electrolytic tin-plated (Sn) – reduces oxidation and ensures good electrical contact
Temperature limit
Up to approx. +120°C during operation (depends on cable type and load)
Electrical classification
IEC-60228 or equivalent conductor class standards
Installation method
Crimp recommended. Soldering can be used, but crimping provides a more consistent and durable connection
Applications
Electrical boards and control panels
Battery systems and charging infrastructure
Solar power installations
Marine and automation systems
Grounding and power installations
Recommendations
Use the correct crimping tool and ensure the crimp covers the entire conductor of the cable end
For high currents: ensure that the cable dimension and number of conductors match the load to avoid overloading
Check the bolt and nut for a proper fit – excessive clearance can lead to poor contacts
For installations exposed to moisture or aggressive environments, additional protection such as sealing or coating is recommended
Raco SC16-8 Cable LugThe SC16-8 cable lug is a non-insulated ring terminal manufactured from tinned copper. Designed for professional use to connect cables with a cross-section of approx. 16 mm² to studs with an M8 bolt hole. Suitable for heavy-duty electrical connections, battery terminals, grounding, and other high-current applications.Advantages
High conductivity: Tin-plated copper ensures low resistance and minimal loss at high currents
Corrosion resistance: Tinned surface protects against oxidation, which is essential in humid or aggressive environments
Robust and durable: Ring-shaped coupling provides a strong and secure mechanical connection
Versatile application: Can be used in both AC and DC applications
Specifications
Parameter
Value
Cable cross-section
Approx. 16 mm²
Bolt hole (stud)
M8
Inner diameter of bolt hole
8 mm
Material
Copper (Cu), tinned/nickel-plated surface for improved corrosion resistance
Surface finish
Electrolytic tinned (Sn) – reduces oxidation and ensures good electrical contact
Temperature limit
Up to approx. +120°C during operation (depends on cable type and load)
Electrical classification
IEC-60228 or equivalent conductor class standards
Mounting method
Crimping is recommended. Soldering can be used, but crimping provides a more uniform and durable connection
Application areas
Electrical cabinets and control panels
Battery systems and charging infrastructure
Solar installations
Marine and automation systems
Grounding and power installations
Recommendations
Use the correct crimping tool, and ensure the crimp covers the entire conductor of the cable end
For high currents: ensure that the cable dimension and number of conductors match the load to avoid overload
Check the bolt and nut for proper fit – excessive clearance can lead to poor contacts
For installations exposed to moisture or aggressive environments, additional protection such as sealing or coating is recommended
Raco SC25-8 Cable LugThe SC25-8 type cable lug is a non-insulated ring terminal manufactured from tinned copper. Designed for professional use to connect cables with a cross-section of approx. 25 mm² to studs with an M8 bolt hole. Suitable for high-power electrical connections, battery terminals, earthing connections, and other high-current applications.Advantages
High conductivity: Copper with a tin coating ensures low resistance and minimal loss at high currents
Corrosion resistance: Tinned surface protects against oxidation, which is important in humid or aggressive environments
Robust and durable: Ring-shaped coupling provides a strong and secure mechanical connection
Versatile application: Can be used in both AC and DC applications
Specifications
Parameter
Value
Cable cross-section
Approx. 25 mm²
Bolt hole (stud)
M8
Inner diameter of bolt hole
8 mm
Material
Copper (Cu), tinned/nickel-plated surface for better corrosion resistance
Surface finish
Electrolytic tin-plated (Sn) – reduces oxidation and ensures good electrical contact
Temperature limit
Up to approx. +120°C during operation (depends on cable type and load)
Electrical classification
IEC-60228 or equivalent conductor class standards
Mounting method
Crimping is recommended. Soldering can be used, but crimping provides a more uniform and durable connection
Areas of application
Electrical switchboards and control panels
Battery systems and charging infrastructure
Solar installations
Marine and automation systems
Earthing connections and power installations
Recommendations
Use the correct crimping tool and ensure the crimp covers the entire conductor of the cable end
For high currents: ensure that cable dimension and number of conductors match the load to avoid overloading
Check the bolt and nut for a proper fit – excessive clearance can result in poor contact
For installations exposed to moisture or aggressive environments, extra protection such as sealing or coating is recommended
Raco SC10-8 Cable LugCable lug type SC10-8 is a non-insulated ring terminal made of tinned copper. Designed for professional use to connect cables with a cross-section of approx. 10 mm² to studs with an M8 bolt hole. Suitable for high-power electrical connections, battery terminals, earthing connections, and other high-current applications.Advantages
High conductivity: Copper with tin coating ensures low resistance and minimal loss at high current levels
Corrosion resistance: Tinned surface protects against oxidation, which is important in humid or aggressive environments
Robust and durable: Ring-shaped coupling provides a strong and secure mechanical connection
Versatile application: Can be used in both AC and DC applications
Specifications
Parameter
Value
Cable cross-section
Approx. 10 mm²
Hole for bolt (stud)
M8
Internal diameter of bolt hole
8 mm
Material
Copper (Cu), tinned/nickel-plated surface for better corrosion resistance
Surface finish
Electrolytic tinned (Sn) – reduces oxidation and ensures good electrical contact
Temperature limit
Up to approx. +120°C during operation (depends on cable type and load)
Electrical classification
IEC-60228 or equivalent conductor class standards
Mounting method
Crimping is recommended. Soldering can be used, but crimping provides a more uniform and durable connection
Application areas
Electrical boards and control panels
Battery systems and charging infrastructure
Solar installations
Marine and automation systems
Earthing and power installations
Recommendations
Use the correct crimping tool and ensure the crimp covers the entire conductor of the cable end
For high current levels: ensure that the cable dimension and number of conductors match the load to avoid overloading
Check the bolt and nut for proper fit – too much clearance can result in poor contact
For installations exposed to moisture or aggressive environments, additional protection such as sealing or coating is recommended
Highflex Battery Cable 35mm² – Red and BlackAn extremely flexible copper cable developed for demanding DC installations, including solar power systems, battery banks, boats, motorhomes, and industrial power systems. The extra-fine copper (Class 6 according to IEC 228/HD 383 S2) makes the cable suitable for installations requiring high flexibility and low resistance.The PVC insulation is soft and resistant to mechanical stress and complies with the IEC 332-1 standard for flame retardancy. With an operating temperature of up to +85°C and down to -30°C, the cable is suitable for both indoor and outdoor installations under Nordic conditions.Advantages
Extra flexible copper cable: Highly bendable with ultra-fine strands – suitable for installations with limited space
High current capacity: Up to 200A in free air
Wide temperature range: -30°C to +85°C
Flame-retardant PVC insulation: Complies with IEC 332-1
Ideal for 12–72V DC systems: Compatible with all LithiumPro LiFePO4 batteries and related equipment
Specifications
Specification
Details
Cross-section
35mm²
Color
Red/Black
Conductor
Class 6 extra-fine tinned copper (1,482 × max. 0.20mm)
Insulation
Soft PVC
Rated voltage
12/500V
Test voltage
2.5kV
Current rating (free air)
200A
Outer diameter
Approx. 14.0mm
Operating temperature
-30°C to +85°C
Weight
Approx. 534 kg/km
Highflex Battery Cable 50mm² – Red and BlackAn extremely flexible copper cable developed for demanding DC installations, including solar power systems, battery banks, boats, motorhomes, and industrial power systems. The extra-fine copper (Class 6 according to IEC 228/HD 383 S2) makes the cable suitable for installations requiring high flexibility and low resistance.The PVC insulation is soft and resistant to mechanical stress and complies with the IEC 332-1 standard for flame retardancy. With an operating temperature down to -30°C and up to +85°C, the cable is suitable for both indoor and outdoor installations in Nordic conditions.Benefits
Extra flexible copper cable: Highly pliable with ultra-fine strands – suitable for installations with limited space
High current capacity: Up to 250A in free air
Wide temperature range: -30°C to +85°C
Flame-retardant PVC insulation: Complies with IEC 332-1
Ideal for 12–72V DC systems: Compatible with all LithiumPro LiFePO4 batteries and related equipment
Specifications
Specification
Details
Cross-section
50mm²
Color
Red/Black
Conductor
Class 6 extra-fine tinned copper (1,482 × max. 0.20mm)
Insulation
Soft PVC
Nominal voltage
12/500V
Test voltage
2.5kV
Current rating (free air)
250A
Outer diameter
Approx. 14.0mm
Operating temperature
-30°C to +85°C
Weight
Approx. 534 kg/km
Jiabaida BMS 8S 100A – 24V Battery Management System for LiFePO4 and Li-ionJiabaida BMS is a reliable and efficient battery management system that protects LiFePO4 and Li-ion battery packs from damage caused by overcharging, deep discharge, short circuits, and temperature fluctuations. The balancing function ensures that all cells charge and discharge uniformly, which extends battery life and improves performance.Benefits
Intelligent battery protection: Prevents overcharging, deep discharge, short circuits, and overloads
Balancing function: Equalizes the voltage between cells to extend battery life
High charging currents: Up to 100A for fast charging
High discharge currents: Up to 200A peak – suitable for high-power applications
Temperature protection: Prevents overheating and cold-related damage
Simple installation: Easy to integrate into battery packs for solar power, vehicles, and UPS systems
Specifications
Specification
Details
Battery types
LiFePO4 and Li-ion
Configuration
8S
System voltage
24V
Balancing function
Yes
Max. charging current
Up to 100A
Max. discharge current
Up to 200A peak
Protection
Over/under voltage, overcurrent, short circuit, temperature
Communication
Bluetooth (UART and CAN also available)
Jiabaida BMS 4S 100A – 12V Battery Management System for LiFePO4 and Li-ionThe Jiabaida BMS is a reliable and efficient battery management system that protects LiFePO4 and Li-ion battery packs against damage caused by overcharging, deep discharging, short circuits, and temperature fluctuations. The balancing function ensures that all cells charge and discharge uniformly, which extends the battery's lifespan and improves performance.Advantages
Intelligent battery protection: Prevents overcharging, deep discharging, short circuits, and overloading
Balancing function: Equalizes the voltage between cells to extend battery life
High charging currents: Up to 100A for fast charging
High discharge currents: Up to 200A peak – suitable for high-power applications
Temperature protection: Prevents overheating and cold-related damage
Simple installation: Easy to integrate into battery packs for solar cells, vehicles, and UPS systems
Specifications
Specification
Details
Battery types
LiFePO4 and Li-ion
Configuration
4S
System voltage
12V
Balancing function
Yes
Max. charge current
Up to 100A
Max. discharge current
Up to 200A peak
Protection
Over/under voltage, overcurrent, short circuit, temperature
Communication
Bluetooth (UART and CAN also available)
Warranty
2 years
12-48V ABS Plastic Battery CaseA compact and robust battery case for building your own lithium batteries in 12V–48V systems. The case is manufactured from high-strength ABS material with rounded corners and a reinforced lid , making it resistant to impacts and vibrations – suitable for mobile installations, boats, and off-grid solutions. Clear polarity markings ensure correct and safe connection.Advantages
Rubber seal for complete insulation: Safe use even in harsh environments
Screw-on lid: Easy access to the battery's interior
Lightweight and compact: Only 2.4 kg – easy to transport and install
High-conductivity terminals: Heavy-duty brass terminals with insulated pole markings
Durable ABS housing: Resists impact, moisture, and UV radiation
Suitable for LiFePO4 projects: Fits 4S, 8S, 12S, and 16S configurations
Specifications
Specification
Details
Material
Impact-resistant ABS plastic
Dimensions (L×W×H)
46.8 × 21.3 × 19.3 cm
Weight
2.4 kg
Included
Lid, terminals, rubber seal, and handle
Possible battery configurations
12V 230Ah
24V 115Ah
36V 50Ah
48V 50Ah
Smaller configurations are also possible
12V 50Ah ABS Plastic Battery CaseA compact and robust battery case for building your own lithium batteries for 12V systems. The case is made of high-strength ABS material with rounded corners and a reinforced lid, making it resistant to impacts and vibrations – ideal for mobile installations, boats, and off-grid solutions. Clear polarity markings ensure correct and safe connection.Benefits
Rubber seal for complete insulation: Safe use even in harsh environments
Lightweight and compact: Only 0.6 kg – easy to transport and install
High-conductivity terminals: Heavy-duty brass terminals with insulated terminal markings
Durable ABS housing: Resists shock, moisture, and UV radiation
Suitable for LiFePO4 projects: Fits 4S configurations
Specifications
Specification
Details
Material
Impact-resistant ABS plastic
Dimensions (L×W×H)
18.8 × 12 × 16 cm
Weight
0.6 kg
Included
Lid, terminals, rubber seal, and handle
Possible battery configurations
12V 50Ah
Smaller configurations are also possible
12-48V 500AH ABS Plastic Battery CaseA compact and robust battery case for building your own lithium batteries in 12V–48V systems. The case is made of high-strength ABS material with rounded corners and a reinforced lid, making it resistant to impact and vibration – suitable for mobile installations, boats, and off-grid solutions. Clear polarity markings ensure correct and safe connection.Advantages
Rubber seal for complete insulation: Safe use even in harsh environments
Lightweight and compact: Only 3.4 kg – easy to transport and mount
High-conductivity terminals: Heavy-duty brass terminals with insulated pole markings
Durable ABS housing: Resists shock, moisture, and UV radiation
Suitable for LiFePO4 projects: Fits 4S, 8S, 12S, and 16S configurations
Specifications
Specification
Details
Material
Impact-resistant ABS plastic
Dimensions (L×W×H)
58.8 × 22.8 × 18.5 cm
Weight
3.4 kg
Included
Lid, terminals, rubber seal, and handle
Possible battery configurations
12V 480Ah
24V 240Ah
36V 115Ah
48V 115Ah
Smaller configurations are also possible
12V 100AH ABS Plastic Battery CaseA compact and robust battery case for building your own lithium batteries in 12V and 24V systems. The case is made of high-strength ABS material with rounded corners and a reinforced lid, making it resistant to impacts and vibrations – suitable for mobile installations, boats, and off-grid solutions. Clear polarity markings ensure correct and safe connection.Advantages
Rubber seal for complete insulation: Safe use even in harsh environments
Screw lid: Easy access to the internal components of the battery
Lightweight and compact: Only 1.1 kg – easy to transport and install
High-conductivity terminals: Heavy-duty brass terminals with insulated pole markings
Durable ABS housing: Resists impact, moisture, and UV radiation
Suitable for LiFePO4 projects: Fits 4S and 8S configurations
Specifications
Specification
Details
Material
Impact-resistant ABS plastic
Dimensions (L×W×H)
29.4 × 14.9 × 19 cm
Weight
1.1 kg
Included
Lid, terminals, rubber seal, and handle
Possible battery configurations
12V 100Ah
24V 50Ah
Smaller configurations are also possible
12-48V ABS Plastic Battery Case with DisplayA compact and robust battery case for building your own lithium batteries in 12V, 24V, 36V, or 48V systems. The built-in voltmeter on the front shows the battery voltage, allowing you to monitor status without extra measuring equipment. The case is manufactured from high-strength ABS material with rounded corners and a reinforced lid, making it resistant to impacts and vibrations – suitable for mobile installations, boats, and off-grid solutions. The spacious design provides room for LiFePO4 cells, BMS, and wiring.Advantages
Built-in digital voltmeter: Monitor battery voltage in real-time
Rubber seal for complete insulation: Safe use even in harsh environments
Screw-on lid: Easy access to the battery's internals
Lightweight and compact: Only 1.5 kg – easy to transport and mount
High-conductivity terminals: Heavy-duty brass terminals with insulated pole markings
Durable ABS housing: Resists shock, moisture, and UV radiation
Suitable for LiFePO4 projects: Fits 4S, 8S, 12S, and 16S configurations
Specifications
Specification
Details
Material
Impact-resistant ABS plastic
Dimensions (L×W×H)
32 × 18 × 25 cm
Weight
1.5 kg
Included
Lid, terminals, rubber seal, display, and handle
Possible battery configurations
12V 230Ah
24V 115Ah
36V 50Ah
48V 30Ah
Smaller configurations are also possible
LithiumPro Stainless Steel Battery Box – XS (34.3 × 30.4 × 17.8 cm)Danish handmade stainless steel battery box. Robust design with lid, terminals, and handles – ideal for battery solutions and energy storage.Core Information
Material: 100% high-quality hardened stainless steel
Design: Robust and durable construction that protects battery cells
Included parts: Tight-fitting lid, integrated terminals, and ergonomic handles
Benefits
Robust design: Protects battery cells against shocks and impacts
Complete package: Supplied with lid, terminals, and handles ready for installation
Flexible application: Can be used to build various battery solutions
Specifications
Specification
Details
Material
Hardened stainless steel
Dimensions (L×W×H)
34.3 × 30.4 × 17.8 cm
Weight
2.5 kg (approx. 3 kg with accessories)
Included
Box, lid, and terminals
Possible Battery Configurations
12V 250Ah
24V 100Ah
48V 50Ah
60V 50Ah
Anything below that is also possible – contact us for advice
Epoxy insulation plate (FR4) – For 240–320Ah LiFePO4 cellsThis FR4 epoxy plate is designed as an interleaf between larger prismatic LiFePO4 cells – typically 240–320Ah. It is placed directly between the cell faces and ensures electrical separation, even in tightly packed battery modules without cell spacers.FR4 is a flame-retardant, heat-resistant material that combines high dielectric strength with rigidity. It provides both insulating safety and mechanical support, especially in battery packs with high-capacity cells and high voltage (24V, 36V, 48V, 72V). Used as standard in LithiumPro's own high-capacity batteries.Benefits
Safety in high capacities: Ensures separation between large cells with high currents and reduces the risk of internal short circuits
Heat and flame retardant: FR4 material can withstand high temperatures
Mechanical strength: Retains shape and insulation properties even under vibration, pressure, and prolonged stress
Easy to customize: Can be cut with a utility knife, CNC, or shears – no special tools required
Contrast color for inspection: The yellow color makes it easy to verify correct placement
Specifications
Specification
Details
Material
FR4 epoxy/fiberglass, flame-retardant
Application
Interleaf between battery cells
Compatibility
240Ah, 280Ah, 304Ah and 320Ah cells
Thickness
2–3mm
Color
Yellow
Epoxy Insulation Plate (FR4) – For 50–240Ah LiFePO4 CellsProfessional FR4 epoxy insulation plate for use between LiFePO4 prismatic cells. The plate prevents electrical contact between the metal parts of the cell casings and ensures proper electrical separation in the battery pack.FR4 is a flame-retardant and rigid material that provides both safe insulation and mechanical stability. It is typically used as a spacer, especially in battery packs without cell holders or for compact assembly. It withstands high temperatures and has high dielectric strength. Used in all professional LithiumPro battery builds from 50Ah to 240Ah.Advantages
Safe insulation between cells: Prevents contact between cell casings and eliminates the risk of short circuits during tight assembly
Flame-retardant and heat-resistant: FR4 material can withstand high temperatures
Mechanical stability: The plate distributes pressure and holds the cells in place without deforming or breaking
Easy to customize: Can be cut with a utility knife, CNC, circular saw, or scissors
Specifications
Specification
Details
Material
FR4 epoxy/fiberglass, flame-retardant
Application
Insulation between battery cells
Size
Customized for 50–240Ah prismatic cells
Thickness
2–3mm
Color
Yellow (standard FR4)
JK DIY Kit – Plug & Play Pre-assembled Battery Module 240–320AhA fully assembled battery module for those who want to build their own lithium battery without the hassle. The case is delivered pre-assembled and contains everything except the battery cells themselves. You simply install 16 LiFePO4 prismatic cells, connect them internally, and the system is ready for operation.The cabinet and components are of high industrial quality. Pre-installed are the JK BMS (with RS485, RS232, and CAN interface), LED SOC display, DIP switches, dry contact output, emergency stop, and main switch. All necessary plugs and connections are ready for plug & play.Benefits
Plug & play design: Everything is prepared and ready for connection – no soldering, welding, or cable clutter
Built-in JK BMS: With RS485, CAN, and RS232 – compatible with brands including Victron, Growatt, and Deye
Rack-mountable cabinet: Standard dimensions with carrying handles and brackets
Advanced status panel: LEDs show SOC, alarm, operating status, communication status, and DIP setting
Robust construction: Professional cabinet with secured contacts, terminals, circuit breaker, and reset
Flexible cell size: All standard EVE LiFePO4 cells (160Ah, 280Ah, or 304Ah) fit directly into the housing
Specifications
Parameter
Value
Nominal voltage
48V / 51.2V
Nominal capacity
Up to 320Ah (when cells are installed)
BMS
Pre-installed 16S JK inverter BMS 200A
BMS communication
RS485-1, RS485-2, CAN, RS232
Status indicator
LED: RUN, ALM, SOC (6 levels), LINK
Contacts
+ and – front-mounted with fuse
Interface
On/off button, RST, ADD, dry contact
Mounting
Rack mounting or stationary placement
Dimensions (L×W×H)
715 × 420 × 267 mm
Weight
Approx. 22 kg (without cells)
Material
Black powder-coated aluminum
Operating temperature
-20°C to +60°C
Warranty
3 years
Victron Orion-Tr non-isolated converter 12V/12V/30A – DC-DC charger for charging while drivingThe Victron Orion-Tr non-isolated converter 12V/12V/30A is a DC-DC charger from Victron Energy that charges the auxiliary battery from the vehicle's alternator while driving. It also works in vehicles with smart alternators, where the voltage varies.Advantages
Works with smart alternator: Also charges in vehicles with Euro 6 engines, where the alternator voltage varies.Application
Charging the auxiliary battery from the alternator while driving.
Camper vans and commercial vehicles with Euro 6 engines and smart alternators.
Boats with separate starter and auxiliary batteries.
Specifications
Specification
Details
Item number
victron-orion-tr-smart-12-12-30a-6e8c43
Victron VE.Bus Smart Dongle – original Victron accessoryThe Victron VE.Bus Smart Dongle is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits directly into the Victron system without modification.
Reliable quality: Materials and workmanship that endure in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Camper van, boat, holiday home, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Operating input voltage range (Vbat)
8 – 70Vdc
Current draw (@12V) - BLE not connected to VictronConnect, VE.Bus connected
Not joining a VE.Smart network <6 mA / Joining a VE.Smart network <9 mA
Current draw (@12V) BLE connected to VictronConnect, VE.Bus connected
Not joining a VE.Smart network <7 mA / Joining a VE.Smart network <9 mA
Operating temperature
-20 to +50 °C / 0 to 120°F
Humidity
max. 95% (non-condensing)
Protection grade
IP20
Material and color
ABS, matte black
VE.Bus Smart Dongle
Specifications
Item number
victron-vebus-smart-dongle-6d47a8
JK BMS 100A/200A 4-8S – Smart Active Balance for Li-ion, LiFePO4, and LTOA powerful and versatile battery management system designed for 4-8 cell (4-8S) 12-24V battery configurations. Compatible with multiple battery types, including Li-ion, LiFePO4, and LTO (Lithium Titanate), and featuring active balancing to optimize battery life and performance. With 100A continuous current and 200A peak, it is suitable for energy-demanding applications such as electric vehicles and large solar power systems.Advantages
Supports 4-8S configurations: Flexible for various battery setups
Active balancing (1A): Improves battery efficiency and lifespan
Overcharge and discharge protection: Ensures stable operation
Short-circuit protection
Temperature protection: Integrated NTC thermistor protects against overheating
Efficient heat dissipation: Heatsinks and fan
Communication and expansion
CAN/RS485 ports: Enables integration with other systems as well as remote monitoring and control
Display input: Supports external display with real-time monitoring of cell balancing, temperature, voltage, and current
GPS input: For mobile applications such as electric vehicles
Heating input: Supports heating elements for temperature control in cold environments
Specifications
Specification
Details
Model
JK-B2A8S10P
Battery types
Li-ion, LiFePO4, LTO
Number of cells
4–8S
System voltage
12–24V DC
Balancing current
1A (active balancing)
Continuous current
100A
Peak current
200A
Communication
Bluetooth, CAN, RS485
Display
Supported (external display sold separately)
Operating temperature
-20°C to +60°C
Dimensions (L×W×H)
153 × 106 × 18 mm
Weight
Approx. 400 g
LithiumPro – HTRC P35 Smart Charger 12V/24V 35AThe HTRC P35 Smart Charger is a powerful and versatile charger designed for 12V and 24V batteries. With advanced multi-stage charging and an LCD display, it provides precise real-time monitoring of charging status. Suitable for AGM, lead-acid, lithium, and LiFePO4 batteries – ideal for cars, motorcycles, boats, and electric vehicles.Advantages
12V (35A) and 24V (18A): Charging adapted to your battery
Compatible with AGM, lead-acid, lithium, and LiFePO4
Advanced protection: Overcharging, short-circuit, overcurrent, and reverse polarity
Real-time LCD display: View voltage, current, and charging stages
Multi-stage charging: Optimized according to battery type for longer service life
High efficiency: Up to 95% – less energy loss, faster charging
Specifications
Specification
Details
Model
HTRC P35 Smart Charger 12/24V 35A
Input voltage
100–240V AC
Output voltage
12–24V (automatic)
Output current
35A (12V) / 18A (24V)
Max. power
600W
Efficiency
Up to 95%
Galvanic isolation
No
Battery compatibility
Lead (AGM/GEL) and LiFePO4
Charging strategy
3-stage, adaptive
Protection
Overcharging, short-circuit, overheating, reverse polarity (IP20)
Operating temperature
-10°C to +40°C
Dimensions (L×W×H)
26 × 18 × 10 cm
Weight
1.6 kg
Warranty
2 years
ApplicationWorkshops, professional use, and private individuals with multiple battery types.
Victron Smart BMS 12/200 – Battery Management System for lithium batteriesThe Victron Smart BMS 12/200 is a battery management system (BMS) from Victron Energy for Li FePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
Protects the cells: Disconnects charging and consumption in the event of cell overvoltage or undervoltage.
Manages the entire system: Sends a signal to the inverter, charger, and MPPT so they react before the battery is damaged.
For Victron LiFePO4: Designed for Victron Smart Lithium batteries and their cell balancing.
Bluetooth built-in: View cell voltages and status in the VictronConnect app.
Applications
Protection of Victron LiFePO4 batteries against overvoltage and undervoltage.
Lithium systems with inverter, charger, and MPPT from Victron.
Safe operation of lithium banks in boats and motorhomes.
Specifications
Specification
Details
System+ port - max. charge and discharge current
200 A
Peak discharge current
400 A
Input voltage
>13 V
Current consumption, remote on
17.5 mA (excluding consumption output and charge output current)
Current consumption, remote off
6.5 mA (BMS functionality still active) / 4.5 mA (BMS functionality disabled)
Consumption disconnect output
Normally high (Vbat – 0.1 V) / Source current limit: 10 mA (short-circuit protected) / Sink current: 0 A (output free floating)
Charge disconnect output
Normally high (Vbat – 0.1 V) / Source current limit: 10 mA (short-circuit protected) / Sink current: 0 A (output free floating)
Pre-alarm output
Normally low / High (Vbat) in case of alarm, max. 1 A / (not short-circuit proof)
Remote (or System) on/off: Remote L and Remote H
Use modes: / ON when L and H terminals are interconnected / ON when L terminal is pulled to battery minus (V < 5 V) / ON when H terminal is high (V > 3 V) / OFF in all other conditions
Operating temperature range
-40 °C to +60 °C
Humidity
100 % / 95 %
Protection, electronics
IP65
DC power connection
M8
Mounting
10Nm
DC connector battery minus
Faston female, 6.3 mm
Weight
2 kg
Dimensions (h × w × d)
65 × 120 × 340 mm
Emission
EN 61000-6-3, EN 55014-1
Immunity
EN 61000-6-2, EN 61000-6-1, EN 55014-2
Automotive directive
ECE R10-5
Alternator port - max. charge current
100 A (with a 125 A fuse)
Item number
victron-smart-bms-12-200-c1fed2
Download datasheet (PDF)
Victron Lynx Shunt VE.Can (M8) – battery monitor with precise consumption measurementThe Victron Lynx Shunt VE.Can (M8) is a battery monitor from Victron Energy that measures the actual current flowing in and out of the battery bank. You get the state of charge in percent, consumption, and estimated time remaining — far more accurate than a simple voltage meter.Advantages
Precise state of charge in percent: Measures the actual current flowing in and out of the battery — not just the voltage.
Time remaining and consumption: Shows how much power is left at the current consumption rate.
History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting.
Applications
Precise display of battery state of charge in motorhomes and boats.
Monitoring of consumption and remaining capacity in solar power systems.
Troubleshooting and documentation of battery health over time.
Specifications
Specification
Details
Supported system voltages
12, 24 or 48V
Reverse polarity protection
No
Current rating
1000 Adc continuous
Power consumption
60 mA @ 12V / 33 mA @ 24V / 20 mA @ 48V
Potential free alarm contact
3 A, 30 Vdc, 250 Vac
Supply voltage range
9 - 70 Vdc
Busbar
M8
Fuse
M8 (a Mega fuse can be installed on M6 bolts)
VE.Can
RJ45 and RJ45 terminator
Power supply connection to Lynx Distributor
RJ10 (a RJ10 cable ships with each Lynx Distributor)
Temperature sensor
terminal connector (Sensor included)
Relay
screw terminal
Enclosure material
ABS
Enclosure dimensions (hxwxd)
190 × 180 × 80 mm
Unit weight
1.4 kg
Busbar material
Tinned copper
Busbar dimensions (hxw)
8 × 30 mm
Operating temperature range
-40 °C to +60 °C
Storage temperature
-40 °C to +60 °C
Humidity
max. 95 % (non-condensing)
Protection class
IP22
Item number
victron-lynx-shunt-ve-can-d8d665
Vic tron SmartShunt 2000A/50 mV IP65 Bluetooth monitor – battery monitoring with precise consumption measurementThe Victron SmartShunt 2000A/50 mV IP65 Bluetooth monitor is a battery monitor from Victron Energy that measures the actual current flowing into and out of the battery bank. You get the state of charge in percentage, consumption, and expected time remaining — far more accurate than a simple voltage meter, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Benefits
Precise state of charge in percentage: Measures the actual current into and out of the battery — not just the voltage.
Time remaining and consumption: Shows how much power is left at the current consumption rate.
Bluetooth built-in: All data directly on your phone in the VictronConnect app.
VE.Direct port: Can be connected to a GX device, so battery data is included on the VRM Portal.
History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting.
Applications
Precise display of the battery's state of charge in motorhomes and boats.
Monitoring of consumption and remaining capacity in solar power systems.
Troubleshooting and documentation of the battery's condition over time.
Specifications
Specification
Details
Supply voltage range
6.5 - 70 Vdc
Current draw
< 1 mA
Input voltage range
6.5 - 70 Vdc
Battery capacity (Ah)
1 - 9999 Ah
Operating temperature range
-40 +50 °C (-40 - 120°F)
Auxiliary input
Measures voltage of second battery, temperature* or midpoint
Temperature measurement range
-20 +50 °C
VE.Direct port
Yes
Current
± 0.01 A
Voltage
± 0.01 V
Amp hours
± 0.1 Ah
State of charge (0 - 100%)
± 0.1 %
Time-to-go
± 1 min.
Temperature range
± 1 °C/°F
Accuracy current measurement
± 0.4 %
Offset
Less than 10 / 10 / 20 / 40 mA
Accuracy voltage measurement
± 0.3 %
Dimensions (h × w × d)
300 A: 44 × 120 × 38 mm / 500 A: 46 × 120 × 54 mm / 1000 A: 68 × 168 × 75 mm / 2000 A: 68 × 168 × 100 mm
Shunt connection bolts
300 A: M8 / 500 A, 1000 A, 2000 A: M10 (0.3937 inch)
Protection class
IP65 (encapsulated)
Safety
EN 60335-1, IEC 61010-1
Emission / immunity
EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
EN 50498
Vbatt cable
1.5 m red cable, with 1 A slow blow fuse and M10 eye terminals
Aux cable
1.5 m red cable, with 1 A slow blow fuse and M10 eye terminals
Temperature sensor
optional (ASS000100000)
SmartShunt IP
300 A / 500 A / 1000 A / 2000 A
Item number
victron-smartshunt-2000a-ip65-c1fbab
Victron SmartShunt 500A/50 mV IP65 Bluetooth monitor – battery monitor with precise consumption measurementThe Victron SmartShunt 500A/50 mV IP65 Bluetooth monitor is a battery monitor from Victron Energy that measures the actual current into and out of the battery bank. You get state of charge in percent, consumption, and expected remaining time — far more accurate than a simple voltage meter, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
Precise state of charge in percent: Measures the actual current into and out of the battery — not just the voltage.
Remaining time and consumption: Shows how much power is left at current consumption levels.
Built-in Bluetooth: All data directly on your phone in the VictronConnect app.
History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting.
Application
Precise display of battery state of charge in motorhomes and boats.
Monitoring of consumption and remaining capacity in solar energy systems.
Troubleshooting and documentation of battery health over time.
Specifications
Specification
Details
Item number
victron-smartshunt-500a-ip65-c1faa3
Victron SmartShunt 1000A/50 mV IP65 Bluetooth Monitor – battery monitor with precise consumption measurementThe Victron SmartShunt 1000A/50 mV IP65 Bluetooth monitor is a battery monitor from Victron Energy that measures the actual current into and out of the battery bank. You get state of charge in percentage, consumption, and expected time remaining — far more accurate than a simple voltage meter, and built-in Bluetooth makes it possible to track operation and change settings directly from the VictronConnect app.Advantages
Precise state of charge in percentage: Measures the actual current into and out of the battery — not just the voltage.
Time remaining and consumption: Shows how much power is left at the current rate of consumption.
Bluetooth built-in: All data directly on your phone in the VictronConnect app.
VE.Direct port: Can be connected to a GX device, so battery data is included on the VRM Portal.
History: Saves data on deepest discharge, cycles, and voltage levels for troubleshooting.
Application
Precise display of the battery's state of charge in motorhomes and boats.
Monitoring of consumption and remaining capacity in solar power systems.
Troubleshooting and documentation of the battery's condition over time.
Specifications
Specification
Details
Supply voltage range
6.5 - 70 Vdc
Current draw
< 1 mA
Input voltage range
6.5 - 70 Vdc
Battery capacity (Ah)
1 - 9999 Ah
Operating temperature range
-40 +50 °C (-40 - 120°F)
Auxiliary input
Measures voltage of second battery, temperature* or midpoint
Temperature measurement range
-20 +50 °C
VE.Direct port
Yes
Current
± 0.01 A
Voltage
± 0.01 V
Amp hours
± 0.1 Ah
State of charge (0 - 100%)
± 0.1 %
Time-to-go
± 1 min.
Temperature range
± 1 °C/°F
Accuracy current measurement
± 0.4 %
Offset
Less than 10 / 10 / 20 / 40 mA
Accuracy voltage measurement
± 0.3 %
Dimensions (h × w × d)
300 A: 44 × 120 × 38 mm / 500 A: 46 × 120 × 54 mm / 1000 A: 68 × 168 × 75 mm / 2000 A: 68 × 168 × 100 mm
Shunt connection bolts
300 A: M8 / 500 A, 1000 A, 2000 A: M10 (0.3937 inch)
Protection class
IP65 (encapsulated)
Safety
EN 60335-1, IEC 61010-1
Emission / immunity
EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
EN 50498
Vbatt cable
1.5 m red cable, with 1 A slow blow fuse and M10 eye terminals
Aux cable
1.5 m red cable, with 1 A slow blow fuse and M10 eye terminals
Temperature sensor
optional accessory (ASS000100000)
SmartShunt IP
300 A / 500 A / 1000 A / 2000 A
Item number
victron-smartshunt-1000a-ip65-c1fa1e
Victron VE.Direct Bluetooth Smart Dongle – original Victron accessoryThe Victron VE.Direct Bluetooth Smart Dongle is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Benefits
Original Victron accessory: Fits the Victron system directly without any modifications.
Reliable quality: Materials and workmanship that endure in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Motorhome, boat, summer cottage, and off-grid installations.
Safe and reliable installation.
Specifications
Specification
Details
Current draw when not connected via Bluetooth
1 mA
Current draw when connected via Bluetooth
2.5 mA
VE.Direct cable length
1.5 m
Specification
Value
Item number
victron-ve-direct-bluetooth-dongle-c1f661
JK BMS 200A/350A 4-8S – Smart Active Balance for Li-ion, LiFePO4, and LTOA powerful and versatile battery management system designed for 4-8 cell (4-8S) 12-24V battery configurations. Compatible with multiple battery types, including Li-ion, LiFePO4, and LTO (Lithium Titanate), and featuring active balancing to optimize battery life and performance. With 200A continuous current and 350A peak, it is suitable for energy-demanding applications such as electric vehicles and large solar power systems.Benefits
Supports 4-8S configurations: Flexible for various battery configurations
Active balancing (2A): Improves battery efficiency and lifespan
Overcharge and discharge protection: Ensures stable operation
Short-circuit protection
Temperature protection: Integrated NTC thermistor protects against overheating
Efficient heat dissipation: Heatsinks and fan
Communication and extensions
CAN/RS485 ports: Enables integration with other systems as well as remote monitoring and control
Display input: Supports external display with real-time monitoring of cell balancing, temperature, voltage, and current
GPS input: For mobile applications such as electric vehicles
Heating input: Supports heating elements for temperature control in cold environments
Specifications
Specification
Details
Model
JK-B2A8S20P
Battery types
Li-ion, LiFePO4, LTO
Number of cells
4–8S
System voltage
12–24V DC
Balancing current
2A (active balancing)
Continuous current
200A
Peak current
350A
Communication
Bluetooth, CAN, RS485
Display
Supported (external display sold separately)
Operating temperature
-20°C to +60°C
Dimensions (L×W×H)
153 × 136 × 17.6 mm
Weight
Approx. 490 g
JK BMS 150A/350A 8-24S – Smart Active Balancer for Li-ion and LiFePO4Designed to protect and manage 8-24 cell battery packs (8-24S) in 24V–72V systems. Compatible with both Li-ion and LiFePO4 batteries. With 150A continuous current and 350A peak, it is suitable for demanding applications such as electric vehicles, large solar installations, and industrial energy systems.Benefits
Supports 8-24S configurations: Versatile for various needs
Overcharge and discharge protection: Extends battery life
Short-circuit protection
Temperature protection: Integrated NTC thermistor ensures stable operation under high loads
Cell balancing (2A active): Keeps cells balanced for optimal performance and longer lifespan
Efficient heat dissipation: Heatsinks and fan
Communication and expansion
CAN/RS485 ports: Enables integration with other systems as well as remote monitoring and control
Display input: Supports external display with real-time view
GPS input: For mobile applications such as electric vehicles
Heating input: For temperature control in cold environments
Specifications
Specification
Details
Model
JK-B2A24S15P
Battery types
Li-ion / LiFePO4 / LTO
Number of cells
8–24S
System voltage
24V / 36V / 48V / 60V / 72V
Balancing current
2A active balancing
Max. continuous current
150A
Max. peak current
350A
Communication
Bluetooth / RS485 / CAN
Operating temperature
-20°C to +60°C
Dimensions (L×W×H)
153 × 136 × 17.6 mm
Weight
Approx. 490 g
Bluetooth module for BMSA reliable and user-friendly module that enables wireless monitoring and control of your Battery Management System (BMS). Suitable for electric vehicles, solar power systems, and energy storage systems where real-time data and easy access to battery information are essential for optimizing efficiency and safety.Advantages
Wireless communication: Connects via Bluetooth for easy monitoring without physical access
Real-time data: Monitor voltage, current, temperature, and capacity directly from your smartphone
Compact design: 51 × 17 mm – easy to install in any setup
User-friendly app: Intuitive access to important data
Versatile application: Supports various BMS systems from multiple brands
Specifications
Specification
Details
Dimensions
51 × 17 mm
Application
Wireless BMS communication
Operating temperature
-20°C to +60°C
Installation
Connect the module's plug to the compatible BMS
Download the dedicated app from your app store
Pair the Bluetooth module with your smartphone via the app
Start monitoring all relevant battery data
JK RS485 Converter + CANBUS – WiFi/NET Adapter Module for JK BMSThe converter enables remote monitoring and control of your battery system. It connects directly to the BMS's RS485 port via color-coded wires (yellow: A, white: B, black: GND), ensuring a stable and reliable connection. For remote network connection, an external CANBUS connection must also be established.The module is compatible with all JK Smart BMS models that support the RS485 protocol and is suitable for integration into solar power systems, backup power systems, and industrial installations.Installation: If you would like the module installed on your battery pack, the task can be completed for 449 DKK in addition to the product price.Advantages
RS485 communication for JK BMS: Enables remote monitoring and control
Plug-and-play installation: Color-coded wires make connection easy and intuitive
Compatible with JK Smart BMS: Supports the RS485 protocol
Stable connection: Reduces signal interference for precise data transmission
No external power supply required: The module is powered directly by the BMS
Application
Solar power systems and off-grid systems – integration of BMS with inverters and monitoring equipment
Backup and emergency power solutions – monitor battery status remotely
Industrial installations – remote control and data collection from BMS
Installation
Connect A (yellow), B (white), and GND (black) to the JK Smart BMS RS485 port
Connect external devices such as inverters, computers, or monitoring systems via RS485
No external power supply required – the module is powered by the BMS
Anderson/REMA Flat connector – 350A / 70mm² with Cable LugA robust and professional power connector designed for high currents in demanding DC installations. With a capacity of up to 350A and support for cables up to 70 mm², it is suitable for battery packs, inverters, chargers, forklift applications, solar systems, and off-grid solutions. The color coding ensures mechanical polarity coding and prevents incorrect connection. The housing is made of impact-resistant plastic, and the silver-plated copper contacts ensure optimal power transmission and low resistance. The connector is designed for many thousands of connection and disconnection cycles without wear.Specifications
Specification
Details
Type
Anderson/REMA Power Connector
Color
Blue, polarized (available in multiple colors)
Rated current
350A
Cable connection
Up to 70 mm²
Contact material
Silver-plated copper
Housing material
Impact-resistant plastic (UL94 V-0)
Operating voltage
Up to 600V DC
Coding
Mechanical (color/polarity)
Anderson/REMA Flat Connector – 175A / 50mm² with Cable LugA robust and professional power connector designed for high currents in demanding DC installations. With a capacity of up to 175A and support for cables up to 50 mm², it is suitable for battery packs, inverters, chargers, forklift applications, solar power systems, and off-grid solutions. The red color ensures mechanical polarity coding and prevents incorrect connection. The housing is made of impact-resistant plastic, and the silver-plated copper contacts ensure optimal power transmission and low resistance. The connector is designed for thousands of connections and disconnections without wear.Specifications
Specification
Details
Type
Anderson/REMA Power Connector
Color
Red, polarized (available in multiple colors)
Rated current
175A
Cable connection
Up to 50 mm²
Contact material
Silver-plated copper
Housing material
Impact-resistant plastic (UL94 V-0)
Operating voltage
Up to 600V DC
Coding
Mechanical (color/polarity)
Resettable DC Circuit Breaker 300A 12–48VRobust circuit breaker designed to protect electrical systems against overcurrent in 12–48V DC applications. With a current capacity of 300A, the fuse is suitable for battery banks, solar energy systems, vehicles, and other high-power energy systems where safety and stability are essential.Advantages
High current capacity: Handles up to 300A and protects the system against overload and short circuits
Wide voltage compatibility: Supports systems from 12V to 48V DC
Fast disconnection: Responds quickly to overcurrent and prevents damage to equipment and batteries
Resettable: Can be reset and reused after tripping
Durable construction: Made of high-quality copper alloy
Easy installation: Quick mounting in both residential and industrial energy systems
Specifications
Parameter
Value
Current capacity
300A
Voltage range
12–48V DC
Material
High-quality copper alloy
Function
Fast disconnection upon overcurrent, resettable for repeated use
ApplicationSuitable for protecting solar energy systems, battery storage systems, vehicles, boat motors, and other high-power DC applications where secure protection against overload and short circuits is required.
Highflex Battery Cable 70mm² – Black and RedAn extremely flexible copper cable developed for demanding DC installations, including solar power systems, battery banks, boats, motorhomes, and industrial power systems. The extra-fine copper (Class 6 per IEC 228/HD 383 S2) makes the cable suitable for installations where high flexibility and low resistance are required.The PVC insulation is soft and resistant to mechanical stress and complies with the IEC 332-1 standard for flame retardancy. With an operating temperature down to -30°C and up to +85°C, the cable is suitable for both indoor and outdoor installations in Nordic conditions.Advantages
Extra flexible copper cable: Highly pliable with ultra-fine strands – suitable for installations with limited space
High current capacity: Up to 300A in free air – suitable for large loads and parallel connection of battery banks
Wide temperature range: -30°C to +85°C
Flame-retardant PVC insulation: Complies with IEC 332-1
Ideal for 12–72V DC systems: Compatible with all LithiumPro LiFePO4 batteries and related equipment
Specifications
Specification
Details
Cross-section
70mm²
Color
Black or red
Conductor
Class 6 extra-fine tinned copper (2,090 × max. 0.20mm)
Insulation
Soft PVC
Rated voltage
12/500V
Test voltage
2.5kV
Current rating (free air)
300A
Outer diameter
Approx. 16.5mm
Operating temperature
-30°C to +85°C
Weight
Approx. 741 kg/km
Daly Bluetooth Module – Wireless Monitoring for BMSWith the Daly Bluetooth module, you get wireless access to your lithium battery's status directly from your mobile phone. An efficient, user-friendly, and secure way to monitor and optimize your Daly BMS solution in real-time.Advantages
Wireless connection via Bluetooth: Access battery data without opening the battery box
Real-time monitoring: View voltage, current, temperature, and capacity in the app
Designed for the Daly BMS series: Compatible with 4S to 24S Daly BMS via 4-pin JST connector
App for Android and iOS: Daly's official app for easy setup and clear display
Secure data transfer: Bluetooth 4.0 with encrypted signal
Specifications
Specification
Details
Model
DL-18B10306GC49
Communication protocol
Bluetooth 4.0 or newer
Cable length
Approx. 50 cm
Connection
4-pin JST connector
Compatibility
4S to 24S Daly BMS
Operating temperature
-20°C to +60°C
Installation
Connect the 4-pin JST connector to your Daly BMS
Download the Daly app (Google Play / App Store)
Pair the device with your phone
Open the app and follow your battery status live
ANL/Blade Fuse 200A / 300A / 400A – DC Fuses for Battery Systems200A, 300A, and 400A single-use fuses are used for the protection of battery systems, inverters, and high-power DC applications. They ensure that the current is interrupted immediately in the event of an overload or short circuit, preventing damage to cables and electronic components.The fuses are designed for high-current installations, typically in solar power systems, vehicles, boats, and industrial systems where high currents are handled. They are compatible with ANL, MEGA, or Class-T fuse holders, depending on the specific model, and are mounted via screw fixation for maximum safety and stability.Advantages
High-current protection (200A / 300A / 400A): Effective protection of battery installations and inverters
Designed for 12–80V DC systems: Suitable for solar power, marine, off-grid, and industrial systems
Fast interruption upon overload: Protects against short circuits and overcurrent
Compact and robust construction: Manufactured in copper alloy for low resistance and high current capacity
Easy installation: Fits standard ANL, MEGA, and Class-T fuse holders
Specifications
Specification
Details
Current ratings
200A, 300A, 400A
Voltage
Up to 80V DC
Fuse type
ANL / MEGA / Class-T
Material
Copper alloy
Mounting
Screw fixation in compatible fuse holder
Protection
Overcurrent and short circuit
Operating temperature
-40°C to +85°C
InstallationThe fuse is mounted in a compatible ANL, MEGA, or Class-T fuse holder and clamped between the terminals. Install close to the battery's positive terminal for maximum protection. It is a single-use fuse that must be replaced in the event of an overload or fault.
Carrying Case for LithiumPro 12V 50Ah BatteriesFits LithiumPro 12V 50Ah batteries, including both the exclusive "world's smallest" version and the green version. The bag is made of durable materials that protect the battery against impacts and weather conditions, and is ideal for transport and storage.Advantages
Solid handles: Comfortable and secure carrying
Spacious interior: The battery sits stably
Zipper: Easy access to the battery
Durable material: Protects against impacts and weather conditions
LithiumPro 15 kW package – solar panels, hybrid inverter and batteryA complete package with the three main components for a solar PV system with battery storage: 10 solar panels totalling 7.2 kWp, a 12 kW 3-phase hybrid inverter from Deye and a 15.36 kWh 48V LiFePO4 battery. The components have been chosen to work together.The package consists of the products – not an installation. Most of our customers set up the system themselves, and we are happy to help with advice along the way. The grid connection and the registration with the grid company must always be carried out by an authorised electrician.What you get
Deye SUN-12K-SG04LP3-EU hybrid inverter – 12 kW, 3-phase. Can run grid-tied, off-grid and as backup. Up to 10 years' manufacturer's warranty from Deye.
10 × LithiumPro 720W solar panels – monocrystalline, 7.2 kWp in total. 10-year warranty.
LithiumPro Exclusive LiFePO4 battery 48V 300Ah (15.36 kWh) – built-in BMS with Bluetooth and Class A LiFePO4 cells. Can be upgraded to 314Ah (16.08 kWh) for 1,500 kr. 3-year warranty (can be extended to 8 years in total). If you would like a different voltage system, please contact us.
For the installation you will also need roof mounting brackets, cables and fuses. Ask us if you are unsure what your house requires.Would you like it installed?Mounting and installation can be added at fixed prices. The work is carried out by external, authorised electricians.
Solar panel mounting – 1,100 kr. per panel incl. mounting hardware and solar cable. For this package: 10 × 1,100 kr. = 11,000 kr.
Solar system installation – 12,000 kr. (14,500 kr. with ATS/off-grid). Incl. fuses, AC cables up to 5 metres and registration with the grid company. The grid company's fee of approx. 1,800 kr. is paid directly to them.
What can the system do for you?
You use more of your own solar power, because the battery stores the surplus from the day for the evening and night
Power for the most important things during a power cut, when the backup output is connected
How much you save depends on your consumption, the orientation of your roof and the electricity price. Call or write to us, and we will run the numbers for your house.
Suitable for
Homes with high electricity consumption (electric car, heat pump, electric heating)
Farms and rural properties
Summer houses and off-grid homes
Backup for critical loads such as refrigeration systems and servers
Victron SmartSolar MPPT RS 450/100-Tr – MPPT solar charge controller for efficient solar chargingThe Victron SmartSolar MPPT RS 450/100-Tr is an MPPT solar charge controller from Victron Energy for high-voltage battery banks. It delivers up to 100 A of charging current, and built-in Bluetooth allows you to monitor operation and change settings directly from the VictronConnect app.Advantages
Up to 100 A charging current: Charges the battery bank quickly and gently.
Built-in Bluetooth: Setup, monitoring, and firmware updates are done wirelessly in the VictronConnect app — no extra display required.
Enclosed electronics (IP21): Can be mounted in utility rooms, boats, motorhomes, and site huts.
Applications
Motorhomes, caravans, and vans with solar panels on the roof.
Boats where the service battery needs to be kept fully charged throughout the season.
Holiday homes, allotments, and site huts without a fixed grid connection.
Specifications
Specification
Details
Programmable charging voltage range
Minimum: 36V / Maximum: 60 V (8)
Absorption charging voltage
Default : 57.6 V (adjustable)
Float charging voltage
Default : 55.2 V (adjustable)
Max. charging current
100 A
Battery temperature sensor
included
Battery voltage measurement
Yes
Max. DC PV voltage
450 V
Start-up voltage
120 V
MPPT operating voltage range
65 – 450 V (1)
Number of MPP Trackers
2
Max. operational PV input current
16 A per tracker
Max. PV short circuit current reverse polarity protection
20 A per tracker
Max. DC output charging power
4000 W per tracker / 5760 W total
Max. PV array size per tracker
7200 Wp (450 V × 20 A)
PV Isolation fail level
100 kΩ
Synchronised Parallel Operation
Yes, up to 25 units with VE.Can
Programmable relay
Yes
Protection
c, d, e
Data Communications
VE.Direct port, VE.Can port & SmartSolar Bluetooth (7)
Bluetooth frequency
2402 – 2480 MHz
Bluetooth power
4dBm
General purpose analog/digital in port
Yes, 2x
Remote on/off
Yes
Operating temperature range
-40 to +60 °C (fan cooled)
Humidity (non-condensing)
max. 95 %
Ambient conditions
indoor type 1, conditioned
Suitable for wet locations
No
Pollution degree
PD2
Max. altitude above sea level
2000 m
Overvoltage category
OVCII
Material
steel, blue RAL 5012
Enclosure class
IP21
Battery connection
Two M8 bolts, 1x Positive and 1x Negative
Power terminals PV input
MC4 Connectors
Weight
7.9 kg
Dimensions (h × w × d)
442 × 310 × 127 mm
Safety
EN-IEC 62109-1
Country of Origin
Designed in Netherlands, Made in India
Item number
victron-smartsolar-mppt-rs-450-100-tr-0509a3
Download datasheet (PDF)
