The entire Victron Energy range: MultiPlus and Quattro inverter/chargers, SmartSolar MPPT controllers, EasySolar all-in-one, Phoenix inverters, Orion DC-DC converters, battery chargers and accessories.
Victron AGM Deep Cycle battery 12V 14Ah – maintenance-free lead-acid batteryThe Victron AGM Deep Cycle battery 12V 14Ah is a maintenance-free lead-acid battery from Victron Energy with a capacity of 14 Ah and a nominal voltage of 12 V. It is built as a service battery for repeated charging and discharging and can be installed in enclosed spaces thanks to its very low gas emission.Advantages
Capacity 14 Ah: Solid capacity for daily use.
Nominal voltage 12 V: Standard voltage for motorhomes, boats, and solar power systems.
Maintenance-free: Sealed construction — no need to top up with water and no free acid.
Withstands deep discharge: Designed as a service battery for repeated charging and discharging.
Can be installed in enclosed spaces: Very low gas emission during normal charging.
Applications
Service battery in motorhomes, caravans, and boats.
Backup and emergency power systems.
Solar power systems where operational reliability is a priority.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
14 Ah
Weight
4.4 kg
Technology
AGM
Dimensions (h × w × d)
101 × 98 × 151 mm
Item number
BAT212120086
Download datasheet (PDF)
Victron AGM Deep Cycle battery 12V 22Ah – maintenance-free lead-acid batteryThe Victron AGM Deep Cycle battery 12V 22Ah is a maintenance-free lead-acid battery from Victron Energy with a capacity of 22 Ah and a nominal voltage of 12 V. It is designed as a house battery for repeated charging and discharging cycles and can be installed in enclosed spaces due to its very low gas emission.Advantages
Capacity 22 Ah: Solid capacity for daily use.
Nominal voltage 12 V: Standard voltage for motorhomes, boats, and solar power systems.
Maintenance-free: Sealed construction — no need to top up with water and no free acid.
Withstands deep discharge: Designed as a house battery for repeated charging and discharging cycles.
Can be installed in enclosed spaces: Very low gas emission during normal charging.
Applications
House battery in motorhomes, caravans, and boats.
Backup and emergency power systems.
Solar power systems where high operational reliability is required.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
22 Ah
Weight
5.8 kg
Technology
AGM
Dimensions (h × w × d)
167 × 77 × 181 mm
Item number
BAT212200084
Download datasheet (PDF)
Victron AGM 12V 38Ah Deep Cycle battery – maintenance-free lead-acid batteryThe Victron AGM 12V 38Ah Deep Cycle battery is a maintenance-free lead-acid battery from Victron Energy with a capacity of 38 Ah and a nominal voltage of 12 V. It is built as a leisure battery for repeated charging and discharging and can be installed in enclosed spaces thanks to its very low gas emission.Advantages
Capacity 38 Ah: Solid capacity for daily consumption.
Nominal voltage 12 V: Standard voltage for motorhomes, boats, and solar power systems.
Maintenance-free: Sealed construction — no water refilling and no free acid.
Withstands deep discharge: Designed as a leisure battery for repeated charging and discharging.
Can be installed in enclosed spaces: Very low gas emission during normal charging.
Application
Leisure battery for motorhomes, caravans, and boats.
Backup and emergency power systems.
Solar power systems where operational reliability is a priority.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
38 Ah
Weight
15 kg
Technology
AGM
Dimensions (h × w × d)
170 × 165 × 197 mm
Item number
BAT412350084
Download datasheet (PDF)
Victron AGM Deep Cycle Battery 12V 165Ah – maintenance-free lead-acid batteryThe Victron AGM Deep Cycle Battery 12V 165Ah is a maintenance-free lead-acid battery from Victron Energy with a capacity of 165 Ah and a nominal voltage of 12 V. It is built as a service battery for repeated charging and discharging and can be installed in enclosed spaces thanks to its very low gas emission.Advantages
Capacity 165 Ah: Solid capacity for daily consumption.
Nominal voltage 12 V: Standard voltage for motorhomes, boats, and solar power systems.
Maintenance-free: Sealed construction — no water refilling and no free acid.
Resistant to deep discharge: Designed as a service battery for repeated charging and discharging.
Can be installed in enclosed spaces: Very low gas emission during normal charging.
Applications
Service battery for motorhomes, caravans, and boats.
Backup and emergency power systems.
Solar power systems where operational reliability is prioritized.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
165 Ah
Weight
47 kg
Technology
AGM
Dimensions (h × w × d)
240 × 172 × 485 mm
Item number
BAT412151084
Download datasheet (PDF)
Victron Peak Power Pack 12V/30Ah/384Wh – Long-life LiFePO4 lithium batteryThe Victron Peak Power Pack 12V/30Ah/384Wh is a LiFePO4 lithium battery from Victron Energy with a capacity of 30 Ah and a nominal voltage of 12 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
30 Ah capacity: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
12 V nominal voltage: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS, which protects the cells against over- and under-voltage.
Applications
Motorhomes and caravans, where weight and capacity are everything.
Boats with high power consumption and the need for fast charging.
Solar power systems in summer cottages and off-grid installations.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
30 Ah
Weight
8.92 kg
Dimensions (h × w × d)
172 × 190 × 172 mm
Item number
PPP012030000
Victron AGM Deep Cycle battery 12V 60Ah – maintenance-free lead-acid batteryThe Victron AGM Deep Cycle battery 12V 60Ah is a maintenance-free lead-acid battery from Victron Energy with a capacity of 60 Ah and a nominal voltage of 12 V. It is built as a deep-cycle battery for repeated charging and discharging and can be installed in enclosed spaces thanks to its very low gas emission.Advantages
Capacity 60 Ah: Solid capacity for daily use.
Nominal voltage 12 V: Standard voltage for motorhomes, boats, and solar power systems.
Maintenance-free: Sealed construction — no water refilling and no free acid.
Withstands deep discharge: Designed as a deep-cycle battery for repeated charging and discharging.
Can be installed in enclosed spaces: Very low gas emission during normal charging.
Applications
Deep-cycle battery for motorhomes, caravans, and boats.
Backup and emergency power systems.
Solar power systems where high operational reliability is required.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
60 Ah
Weight
18 kg
Technology
AGM
Dimensions (h × w × d)
227 × 138 × 229 mm
Item number
BAT412550084
Download datasheet (PDF)
Victron AGM Deep Cycle battery 12V 240Ah – maintenance-free lead-acid batteryThe Victron AGM Deep Cycle battery 12V 240Ah is a maintenance-free lead-acid battery from Victron Energy with a capacity of 240 Ah and a nominal voltage of 12 V. It is built as a service battery for repeated charging and discharging and can be installed in enclosed spaces thanks to its very low gas emission.Advantages
Capacity 240 Ah: Solid capacity for daily consumption.
Nominal voltage 12 V: Standard voltage for motorhomes, boats, and solar power systems.
Maintenance-free: Sealed construction — no water refilling and no free acid.
Withstands deep discharge: Designed as a service battery for repeated charging and discharging.
Can be installed in enclosed spaces: Very low gas emission during normal charging.
Application
Service battery in motorhomes, caravans, and boats.
Backup and emergency power systems.
Solar power systems where operational reliability is a high priority.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
240 Ah
Weight
67 kg
Technology
AGM
Dimensions (h × w × d)
224 × 240 × 522 mm
Item number
BAT412124081
Download datasheet (PDF)
Victron AGM Deep Cycle battery 6V 240Ah – maintenance-free lead-acid batteryThe Victron AGM Deep Cycle battery 6V 240Ah is a maintenance-free lead-acid battery from Victron Energy with a capacity of 240 Ah and a nominal voltage of 6 V. It is built as a leisure battery for repeated charging and discharging and can be installed in enclosed spaces due to its very low gas emission.Advantages
Capacity 240 Ah: Solid capacity for daily consumption.
Nominal voltage 6 V: Standard voltage for camper vans, boats, and solar power systems.
Maintenance-free: Sealed construction — no need to top up with water and no free acid.
Withstands deep discharge: Designed as a leisure battery for repeated charging and discharging.
Can be mounted in enclosed spaces: Very low gas emission during normal charging.
Applications
Leisure battery for camper vans, caravans, and boats.
Backup and emergency power systems.
Solar power systems where operational reliability is a high priority.
Specifications
Specification
Details
Nominal voltage
6 V
Capacity (20-hour discharge)
240 Ah
Weight
31 kg
Technology
AGM
Dimensions (h × w × d)
247 × 176 × 320 mm
Item number
BAT406225084
Download datasheet (PDF)
Victron AGM Deep Cycle battery 12V 8Ah – maintenance-free lead-acid batteryThe Victron AGM Deep Cycle battery 12V 8Ah is a maintenance-free lead-acid battery from Victron Energy with a capacity of 8 Ah and a nominal voltage of 12 V. It is built as a service battery for repeated charging and discharging and can be installed in enclosed spaces thanks to its very low gas emission.Advantages
Capacity 8 Ah: Solid capacity for daily consumption.
Nominal voltage 12 V: Standard voltage for motorhomes, boats, and solar power systems.
Maintenance-free: Sealed construction — no water refilling and no free acid.
Withstands deep discharge: Designed as a service battery for repeated charging and discharging.
Can be installed in enclosed spaces: Very low gas emission during normal charging.
Application
Service battery for motorhomes, caravans, and boats.
Backup and emergency power systems.
Solar power systems where operational reliability is a high priority.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
8 Ah
Weight
2.3 kg
Technology
AGM
Dimensions (h × w × d)
101 × 65 × 151 mm
Item number
BAT212070084
Download datasheet (PDF)
Victron Lithium SuperPack 25.6V 100Ah NG – Long-life LiFePO4 lithium batteryThe Victron Lithium SuperPack 25.6V 100Ah NG is a LiFePO4 lithium battery from Victron Energy with a capacity of 100 Ah and a nominal voltage of 24 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Benefits
Capacity 100 Ah: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
Nominal voltage 24 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS, which protects the cells against over- and undervoltage.
Application
Motorhomes and caravans, where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar energy systems in summer cottages and off-grid installations.
Specifications
Specification
Details
Nominal voltage
24 V
Capacity (20-hour discharge)
100 Ah
Weight
21 kg
Terminal layout
1
Hold-down
00
Technology
LITHIUM
Dimensions (h × w × d)
173 × 198 × 466 mm
Item number
BAT524110740
Download datasheet (PDF)
Victron Lithium SuperPack 12.8V 200Ah NG – Long-life LiFePO4 lithium batteryThe Victron Lithium SuperPack 12.8V 200Ah NG is a LiFePO4 lithium battery from Victron Energy with a capacity of 200 Ah and a nominal voltage of 12 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
Capacity 200 Ah: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
Nominal voltage 12 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS, which protects the cells against over- and under-voltage.
Application
Motorhomes and caravans, where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar power systems in holiday homes and off-grid installations.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
200 Ah
Weight
21 kg
Terminal layout
1
Terminal type
M8
Base hold-down
00
Technology
LITHIUM
Dimensions (h × w × d)
173 × 198 × 466 mm
Item number
BAT512120740
Download datasheet (PDF)
Victron Peak Power Pack 12V/40Ah/512Wh – Long-life LiFePO4 lithium batteryThe Victron Peak Power Pack 12V/40Ah/512Wh is a LiFePO4 lithium battery from Victron Energy with a capacity of 40 Ah and a nominal voltage of 12 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
Capacity 40 Ah: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
Nominal voltage 12 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half that of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS, which protects the cells against over- and undervoltage.
Applications
Motorhomes and caravans, where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar power systems in summer cottages and off-grid installations.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
40 Ah
Weight
10.61 kg
Dimensions (h × w × d)
172 × 190 × 212 mm
Item number
PPP012040000
Victron Lithium SuperPack 12.8V 200Ah – Long-life LiFePO4 lithium batteryThe Victron Lithium SuperPack 12.8V 200Ah is a LiFePO4 lithium battery from Victron Energy with a capacity of 200 Ah and a nominal voltage of 12 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
Capacity 200 Ah: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
Nominal voltage 12 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS, which protects the cells against over- and undervoltage.
Application
Camper vans and caravans, where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar power systems in holiday homes and off-grid installations.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
200 Ah
Weight
21.2 kg
Terminal type
M8
Technology
LITHIUM
Dimensions (h × w × d)
208 × 269 × 520 mm
Item number
BAT512120705
Download datasheet (PDF)
Victron Peak Power Pack 12V/20Ah/256Wh – Long-life LiFePO4 lithium batteryThe Victron Peak Power Pack 12V/20Ah/256Wh is a LiFePO4 lithium battery from Victron Energy with a capacity of 20 Ah and a nominal voltage of 12 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
Capacity 20 Ah: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
Nominal voltage 12 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS, which protects the cells against over- and undervoltage.
Applications
Camper vans and caravans, where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar power systems in summer cottages and off-grid installations.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
20 Ah
Weight
7.39 kg
Technology
LITHIUM
Dimensions (h × w × d)
172 × 190 × 132 mm
Item number
PPP012020000
Victron Lithium SuperPack 25.6V 50Ah – Long-life LiFePO4 lithium batteryThe Victron Lithium SuperPack 25.6V 50Ah is a LiFePO4 lithium battery from Victron Energy with a capacity of 50 Ah and a nominal voltage of 25.6 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
Capacity 50 Ah: Real usable capacity — lithium can be discharged deeply without damaging its service life.
Nominal voltage 25.6 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS that protects the cells against over-voltage and under-voltage.
Applications
Motorhomes and caravans, where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar power systems in summer cottages and off-grid installations.
Specifications
Specification
Details
Nominal voltage
25.6 V
Capacity (20-hour discharge)
50 Ah
Weight
14 kg
Terminal type
M8
Technology
LITHIUM
Dimensions (h × w × d)
220 × 172 × 330 mm
Part number
BAT524050705
Download datasheet (PDF)
Victron VE.Bus BMS V2 – battery management system for lithium batteriesThe Victron VE.Bus BMS V2 is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged.Advantages
Protects the cells: Disconnects charging and loads in case of excessively high or low cell voltage.
Controls the entire system: Sends a signal to the inverter, charger, and MPPT so they react before the battery is damaged.
For Victron LiFePO4: Designed for Victron Smart Lithium batteries and their cell balancing.
Application
Protection of Victron LiFePO4 batteries against over- and undervoltage.
Lithium systems with inverter, charger, and MPPT from Victron.
Safe operation of lithium banks in boats and campers.
Specifications
Specification
Details
Current draw - regular operation
10 mA (excluding load disconnect current)
Current draw - low cell voltage
2 mA
Current draw - switched off via remote on/off terminal
1.50 mA
GX-power output
1 A
Aux-in input
1 A
Pre-alarm output current rating
1 A, not short-circuit protected
Load disconnect output
Normally high (output voltage ≈ supply voltage – 1 V) / Floating when load needs to be disconnected / Source current limit: 1 A / Sink current: 0 A
Charge disconnect output
Normally high, (output voltage ≈ supply voltage – 1 V) / Floating when charger should be disconnected / Source current limit: 10 mA / Sink current: 0 A
Remote on/off
Usage modes to turn system on or off: / ON when L and H terminals are interconnected (switch or relay contact) / ON when L terminal is pulled to battery minus (V<3.5 V) / ON when H terminal is high (2.9 V < VH < Vbat) / OFF in all other conditions
VE.Bus communications ports
2 x RJ45 sockets to connect to all VE.Bus products
Input voltage range
9 – 70Vdc
Material
ABS
Color
Matte black with a blue sticker
Weight
120g
Dimensions (h × w × d)
23.8 mm × 94.5 mm × 105.5 mm
Technology
LITHIUM
Item number
BMS300200200
Download datasheet (PDF)
Victron Lithium SuperPack 12.8V 100Ah NG – Long-life LiFePO4 lithium batteryThe Victron Lithium SuperPack 12.8V 100Ah NG is a LiFePO4 lithium battery from Victron Energy with a capacity of 100 Ah and a nominal voltage of 12 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
Capacity 100 Ah: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
Nominal voltage 12 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS that protects the cells against over- and undervoltage.
Application
Motorhome and caravan, where weight and capacity are everything.
Boat with high power consumption and a need for fast charging.
Solar power systems in summer cottages and off-grid installations.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
100 Ah
Weight
11 kg
Terminal configuration
1
Terminal type
M8
Technology
LITHIUM
Dimensions (h × w × d)
173 × 173 × 273 mm
Item number
BAT512110740
Download datasheet (PDF)
Victron Lithium Super 12.8V 100Ah-A (M8) – Long-life LiFePO4 lithium batteryThe Victron Lithium Super 12.8V 100Ah-A (M8) is a LiFePO4 lithium battery from Victron Energy with a capacity of 100 Ah and a nominal voltage of 12 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
Capacity 100 Ah: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
Nominal voltage 12 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS, which protects the cells against over- and undervoltage.
Application
Motorhome and caravan, where weight and capacity are everything.
Boat with high power consumption and a need for fast charging.
Solar power systems in summer houses and off-grid installations.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
100 Ah
Weight
11 kg
Terminal type
M8
Technology
LITHIUM
Dimensions (h × w × d)
172 × 330 × 220 mm
Part number
BAT512110712
Download datasheet (PDF)
Victron Lithium SuperPack 12.8V 20Ah – Long-life LiFePO4 lithium batteryThe Victron Lithium SuperPack 12.8V 20Ah is a LiFePO4 lithium battery from Victron Energy with a capacity of 20 Ah and a nominal voltage of 12 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
20 Ah Capacity: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
12 V Nominal voltage: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS, which protects the cells against over-voltage and under-voltage.
Applications
Camper vans and caravans, where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar energy systems in summer cottages and off-grid installations.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
20 Ah
Weight
3.5 kg
Terminal type
M5
Technology
LITHIUM
Dimensions (h × w × d)
167 × 77 × 181 mm
Item number
BAT512020705
Download datasheet (PDF)
Victron VE.Bus BMS NG – battery management system for lithium batteriesThe Victron VE.Bus BMS NG is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged.Advantages
Protects the cells: Disconnects charging and loads in case of over- or undervoltage.
Controls the entire system: Sends a signal to the inverter, charger, and MPPT so they react before the battery is damaged.
For Victron LiFePO4: Designed for Victron Smart Lithium batteries and their cell balancing.
Applications
Protection of Victron LiFePO4 batteries against over- and undervoltage.
Lithium systems with inverters, chargers, and MPPTs from Victron.
Safe operation of lithium banks in boats and motorhomes.
Specifications
Specification
Details
Current draw - regular operation
10 mA (excluding load disconnect current)
Current draw - low cell voltage
2 mA
Current draw - switched off via remote on/off terminal
1.50 mA
GX-power output
1 A
Aux-in input
1 A
Pre-alarm output current rating
1 A, not short-circuit protected
Load disconnect output
Normally high (output voltage ≈ supply voltage – 1 V) / Floating when load needs to be disconnected / Source current limit: 1 A / Sink current: 0 A
Charge disconnect output
Normally high, (output voltage ≈ supply voltage – 1 V) / Floating when charger should be disconnected / Source current limit: 10 mA / Sink current: 0 A
Remote on/off
Usage modes to turn system on or off: / ON when L and H terminals are interconnected (switch or relay contact) / ON when L terminal is pulled to battery minus (V<3.5 V) / ON when H terminal is high (2.9 V < VH < Vbat) / OFF in all other conditions
VE.Bus communications ports
2 x RJ45 sockets to connect to all VE.Bus products
Input voltage range
9 – 70 Vdc
Material
ABS
Colour
Matte black with a blue sticker
Weight
120 g
Dimensions (h × w × d)
23.8 mm × 94.5 mm × 105.5 mm
Technology
LITHIUM
Item number
BMS300200300
Download datasheet (PDF)
Victron Lithium SuperPack 12.8V 60Ah – Long-life LiFePO4 lithium batteryThe Victron Lithium SuperPack 12.8V 60Ah is a LiFePO4 lithium battery from Victron Energy with a capacity of 60 Ah and a nominal voltage of 12 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
Capacity 60 Ah: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
Nominal voltage 12 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS that protects the cells against over- and undervoltage.
Applications
Camper vans and caravans where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar power systems in summer cottages and off-grid installations.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
60 Ah
Weight
9.5 kg
Terminal type
M6
Technology
LITHIUM
Dimensions (h × w × d)
213 × 138 × 229 mm
Part number
BAT512060705
Download datasheet (PDF)
Victron Lithium LiFePO4 51.2V 100Ah NG – Long-life LiFePO4 lithium batteryThe Victron Lithium LiFePO4 51.2V 100Ah NG is a LiFePO4 lithium battery from Victron Energy with a capacity of 100 Ah and a nominal voltage of 48 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
Capacity 100 Ah: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
Nominal voltage 48 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS that protects the cells against over- and undervoltage.
Application
Motorhomes and caravans, where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar power systems in summer cottages and off-grid installations.
Specifications
Specification
Details
Nominal voltage
48 V
Capacity (20-hour discharge)
100 Ah
Weight
37 kg
Terminal layout
1
Terminal type
M8
Technology
LITHIUM
Dimensions (h × w × d)
206 × 162 × 648 mm
Item number
BAT548110620
Download datasheet (PDF)
Victron Smart BMS CL 12-100 – battery management system for lithium batteriesThe Victron Smart BMS CL 12-100 is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
Protects the cells: Disconnects charging and consumption in the event of excessively high or low cell voltage.
Controls the entire system: Sends a signal to the inverter, charger, and MPPT so they react before the battery is damaged.
For Victron LiFePO4: Designed for Victron Smart Lithium batteries and their cell balancing.
Bluetooth built-in: View cell voltages and status in the VictronConnect app.
Application
Protection of Victron LiFePO4 batteries against over- and undervoltage.
Lithium systems with inverter, charger, and MPPT from Victron.
Safe operation of lithium banks in boats and motorhomes.
Specifications
Specification
Details
Input voltage
>13 A
Current consumption, remote on
16 mA (excluding load output and charge output current)
Current consumption, remote off
5 mA (BMS functionality still active)
Load disconnect output
Normally high (Vbat – 0.1 V) / Source current limit: 10 mA (short-circuit protected) / Sink current: 0 A (output free floating)
Charge disconnect output
Normally high (Vbat – 0.1 V) / Source current limit: 10 mA (short-circuit protected) / Sink current: 0 A (output free floating)
Pre-alarm output
Normally free floating / High (Vbat) in case of alarm, max. 1 A / (not short-circuit proof)
System on/off: Remote L and Remote H
Use modes: / ON when L and H terminals are interconnected / ON when L terminal is pulled to battery minus (V < 5 V) / ON when H terminal is high (V > 3 V) / OFF in all other conditions
Operating temperature range
-40 °C to +60 °C
Humidity
100 % / 95 %
Protection, electronics
IP65
DC power connection
M8
Mounting
10Nm
DC connector battery minus
Faston female, 6.3 mm
Weight
1.6 kg
Dimensions (h × w × d)
65 × 120 × 224 mm
Emission
EN 61000-6-3, EN 55014-1
Immunity
EN 61000-6-2, EN 61000-6-1, EN 55014-2
Automotive directive
ECE R10-5
Alternator port - max. charge current
100 A (with a 125 A fuse)
Technology
LITHIUM
Item number
BMS110022000
Download datasheet (PDF)
Victron SolidSwitch 104 – original Victron accessoryThe Victron SolidSwitch 104 is an original accessory from Victron Energy. It integrates directly into the Victron system and is built to withstand demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits directly into the Victron system without the need for modifications.
Reliable quality: Materials and craftsmanship built to last in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Motorhomes, boats, holiday homes, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Weight
0.05 kg
Dimensions (h × w × d)
7 × 7 × 4 mm
Part number
BMS800200104
Victron Lithium LiFePO4 12.8V 200Ah Smart – Long-life LiFePO4 lithium batteryThe Victron Lithium LiFePO4 12.8V 200Ah Smart is a LiFePO4 lithium battery from Victron Energy with a capacity of 200 Ah and a nominal voltage of 12 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
Capacity 200 Ah: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
Nominal voltage 12 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS, which protects the cells against over- and undervoltage.
Applications
Motorhomes and caravans, where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar power systems in summer cottages and off-grid installations.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
200 Ah
Weight
22 kg
Terminal type
M8
Technology
LITHIUM
Dimensions (h × w × d)
152 × 321 × 237 mm
Part number
BAT512120610
Download datasheet (PDF)
Victron Lithium NG service tool (lingst) USB-C – service cable for Lithium NG batteries and BMS NGThe Lithium NG Service Tool (LiNGST) is a service tool from Victron Energy that provides a direct wired connection between a Windows PC and the M8 service connection on Lithium NG batteries and BMS NG units. It is used for commissioning, troubleshooting and in-depth analysis – especially where there is no wireless access. This version connects to the PC via USB-C.Benefits
Monitoring and logging: Monitor and log data from Lithium NG batteries, with a logging interval down to 1 second.
BMS testing without a battery: The tool can simulate a Lithium NG battery, so you can test BMS functions such as ATD (allow-to-discharge), ATC (allow-to-charge), pre-alarm and relay status.
Data sniffer: Log data from several Lithium NG batteries connected in a daisy chain.
Wired connection: Works without a wireless connection – handy for on-site troubleshooting.
Applications
Commissioning of systems with Lithium NG batteries and BMS NG.
Troubleshooting and servicing for installers and workshops.
Logging data from a complete Lithium NG system for analysis.
Specifications
Specification
Details
Type
Wired service interface between PC and M8 service connection
PC connection
USB-C
Cables
150 cm USB cable and 20 cm M8 connection cable
Supported products
Lithium NG batteries, Lynx Smart BMS NG 500 and 1000, VE.Bus BMS NG and smallBMS NG
Functions
Battery tester (monitoring and logging), BMS tester (simulates an NG battery) and data sniffer (several batteries)
System requirements
Windows PC with the Lithium NG Service Tool software (download it under Software downloads at victronenergy.com)
Other version
USB-A (ASS032300010)
Item number
ASS032300030
Download datasheet (PDF)
Victron Lithium LiFePO4 25.6V 300Ah NG – Long-life LiFePO4 lithium batteryThe Victron Lithium LiFePO4 25.6V 300Ah NG is a LiFePO4 lithium battery from Victron Energy with a capacity of 300 Ah and a nominal voltage of 24 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Benefits
Capacity 300 Ah: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
Nominal voltage 24 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half that of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS, which protects the cells against over- and undervoltage.
Application
Campervans and caravans, where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar energy systems in summer cottages and off-grid installations.
Specifications
Specification
Details
Nominal voltage
24 V
Capacity (20-hour discharge)
300 Ah
Weight
52 kg
Terminal type
M8
Technology
LITHIUM
Dimensions (h × w × d)
205 × 206 × 841 mm
Item number
BAT524130620
Download datasheet (PDF)
Victron Small BMS NG – battery management system for lithium batteriesThe Victron Small BMS NG is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged.Advantages
Protects the cells: Disconnects charging and consumption in case of excessively high or low cell voltage.
Controls the entire system: Sends a signal to the inverter, charger, and MPPT so they react before the battery is damaged.
For Victron LiFePO4: Designed for Victron Smart Lithium batteries and their cell balancing.
Applications
Protection of Victron LiFePO4 batteries against over- and undervoltage.
Lithium systems with inverter, charger, and MPPT from Victron.
Safe operation of lithium banks in boats and motorhomes.
Specifications
Specification
Details
Weight
0.1 kg
Technology
LITHIUM
Dimensions (h × w × d)
23 × 106 × 43 mm
Item number
BMS400100300
Download datasheet (PDF)
Victron VE.Bus to BMS12-200 alternator cable – original Victron accessoryThe Victron VE.Bus to BMS12-200 alternator cable is an original accessory from Victron Energy. It integrates directly into the Victron system and is built to last in demanding marine and vehicle environments.Benefits
Original Victron accessory: Fits the Victron system directly without any modifications.
Reliable quality: Materials and workmanship designed to withstand marine and vehicle environments.
Application
Original accessory that fits the Victron system directly.
Camper vans, boats, summer cottages, and off-grid systems.
Safe and stable installation.
Specifications
Specification
Details
Weight
0.12 kg
Dimensions (h × w × d)
13 × 17 × 4 mm
Part number
ASS030510120
Victron Lithium NG service tool (lingst) USB-A – service cable for Lithium NG batteries and BMS NGThe Lithium NG Service Tool (LiNGST) is a service tool from Victron Energy that provides a direct wired connection between a Windows PC and the M8 service connection on Lithium NG batteries and BMS NG units. It is used for commissioning, troubleshooting and in-depth analysis – especially where there is no wireless access. This version connects to the PC via USB-A.Benefits
Monitoring and logging: Monitor and log data from Lithium NG batteries, with a logging interval down to 1 second.
BMS testing without a battery: The tool can simulate a Lithium NG battery, so you can test BMS functions such as ATD (allow-to-discharge), ATC (allow-to-charge), pre-alarm and relay status.
Data sniffer: Log data from several Lithium NG batteries connected in a daisy chain.
Wired connection: Works without a wireless connection – handy for on-site troubleshooting.
Applications
Commissioning of systems with Lithium NG batteries and BMS NG.
Troubleshooting and servicing for installers and workshops.
Logging data from a complete Lithium NG system for analysis.
Specifications
Specification
Details
Type
Wired service interface between PC and M8 service connection
PC connection
USB-A
Cables
150 cm USB cable and 20 cm M8 connection cable
Supported products
Lithium NG batteries, Lynx Smart BMS NG 500 and 1000, VE.Bus BMS NG and smallBMS NG
Functions
Battery tester (monitoring and logging), BMS tester (simulates an NG battery) and data sniffer (several batteries)
System requirements
Windows PC with the Lithium NG Service Tool software (download it under Software downloads at victronenergy.com)
Other version
USB-C (ASS032300030)
Item number
ASS032300010
Download datasheet (PDF)
Victron Lithium LiFePO4 12.8V 300Ah NG – Long-life LiFePO4 lithium batteryThe Victron Lithium LiFePO4 12.8V 300Ah NG is a LiFePO4 lithium battery from Victron Energy with a capacity of 300 Ah and a nominal voltage of 12 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
Capacity 300 Ah: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
Nominal voltage 12 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS, which protects the cells against over- and undervoltage.
Application
Campervans and caravans, where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar power systems in holiday homes and off-grid installations.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
300 Ah
Weight
29 kg
Terminal layout
1
Terminal type
M8
Technology
LITHIUM
Dimensions (h × w × d)
206 × 205 × 447 mm
Item number
BAT512130620
Download datasheet (PDF)
Victron Lithium LiFePO4 25.6V 100Ah Smart – Long-life LiFePO4 lithium batteryThe Victron Lithium LiFePO4 25.6V 100Ah Smart is a LiFePO4 lithium battery from Victron Energy with a capacity of 100 Ah and a nominal voltage of 24 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
Capacity 100 Ah: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
Nominal voltage 24 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS, which protects the cells against over- and undervoltage.
Applications
Motorhomes and caravans, where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar power systems in holiday homes and off-grid installations.
Specifications
Specification
Details
Nominal voltage
24 V
Capacity (20-hour discharge)
100 Ah
Weight
28 kg
Terminal type
M8
Technology
LITHIUM
Dimensions (h × w × d)
163 × 650 × 197 mm
Part number
BAT524110610
Download datasheet (PDF)
Victron Lithium LiFePO4 12.8V 150Ah NG – Long-life LiFePO4 lithium batteryThe Victron Lithium LiFePO4 12.8V 150Ah NG is a LiFePO4 lithium battery from Victron Energy with a capacity of 150 Ah and a nominal voltage of 12 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
Capacity 150 Ah: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
Nominal voltage 12 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS, which protects the cells against over- and undervoltage.
Application
Campervans and caravans, where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar power systems in summer houses and off-grid installations.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
150 Ah
Weight
14 kg
Terminal type
M8
Technology
LITHIUM
Dimensions (h × w × d)
205 × 205 × 250 mm
Part number
BAT512115620
Download datasheet (PDF)
Victron Lithium LiFePO4 12.8V 200Ah NG – Long-life LiFePO4 lithium batteryThe Victron Lithium LiFePO4 12.8V 200Ah NG is a LiFePO4 lithium battery from Victron Energy with a capacity of 200 Ah and a nominal voltage of 12 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
Capacity 200 Ah: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
Nominal voltage 12 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS, which protects the cells against over- and undervoltage.
Application
Campervans and caravans, where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar power systems in holiday homes and off-grid installations.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
200 Ah
Weight
19 kg
Terminal position
1
Terminal type
M8
Technology
LITHIUM
Dimensions (h × w × d)
235 × 160 × 341 mm
Part number
BAT512120620
Download datasheet (PDF)
Victron Lithium LiFePO4 12.8V 180Ah Smart – Long-life LiFePO4 lithium batteryThe Victron Lithium LiFePO4 12.8V 180Ah Smart is a LiFePO4 lithium battery from Victron Energy with a capacity of 180 Ah and a nominal voltage of 12 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
180 Ah capacity: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
Nominal voltage 12 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS, which protects the cells against over- and undervoltage.
Application
Motorhomes and caravans, where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar power systems in summer cottages and off-grid installations.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
180 Ah
Weight
21.1 kg
Terminal type
M8
Technology
LITHIUM
Dimensions (h × w × d)
152 × 321 × 237 mm
Item number
BAT512118610
Download datasheet (PDF)
Victron Lithium LiFePO4 12.8V 100Ah NG – Long-life LiFePO4 lithium batteryThe Victron Lithium LiFePO4 12.8V 100Ah NG is a LiFePO4 lithium battery from Victron Energy with a capacity of 100 Ah and a nominal voltage of 12 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
Capacity 100 Ah: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
Nominal voltage 12 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS, which protects the cells against over- and undervoltage.
Application
Motorhomes and caravans, where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar power systems in summer cottages and off-grid installations.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
100 Ah
Weight
9 kg
Terminal layout
1
Terminal type
M8
Technology
LITHIUM
Dimensions (h × w × d)
160 × 197 × 235 mm
Item number
BAT512110620
Download datasheet (PDF)
Victron Small BMS – battery management system for lithium batteriesThe Victron Small BMS is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged.Benefits
Protects cells: Disconnects charging and consumption in case of excessively high or low cell voltage.
Controls the entire system: Sends a signal to the inverter , charger, and MPPT so they react before the battery is damaged.
For Victron LiFePO4: Designed for Victron Smart Lithium batteries and their cell balancing.
Application
Protection of Victron LiFePO4 batteries against over- and undervoltage.
Lithium systems with inverter, charger, and MPPT from Victron.
Safe operation of lithium banks in boats and motorhomes.
Specifications
Specification
Details
Weight
0.09 kg
Technology
LITHIUM
Part number
BMS400100000
Victron Lithium LiFePO4 25.6V 100Ah NG – Long-life LiFePO4 lithium batteryThe Victron Lithium LiFePO4 25.6V 100Ah NG is a LiFePO4 lithium battery from Victron Energy with a capacity of 100 Ah and a nominal voltage of 24 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
Capacity 100 Ah: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
Nominal voltage 24 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS, which protects the cells against over- and undervoltage.
Application
Motorhomes and caravans, where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar power systems in summer cottages and off-grid installations.
Specifications
Specification
Details
Nominal voltage
24 V
Capacity (20-hour discharge)
100 Ah
Weight
19 kg
Terminal position
1
Terminal type
M8
Technology
LITHIUM
Dimensions (h × w × d)
235 × 160 × 341 mm
Item number
BAT524110620
Download datasheet (PDF)
Victron Lithium LiFePO4 25.6V 200Ah NG – Long-life LiFePO4 lithium batteryThe Victron Lithium LiFePO4 25.6V 200Ah NG is a LiFePO4 lithium battery from Victron Energy with a capacity of 200 Ah and a nominal voltage of 24 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
Capacity 200 Ah: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
Nominal voltage 24 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS, which protects the cells against over- and undervoltage.
Applications
Campervans and caravans where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar power systems in summer cottages and off-grid installations.
Specifications
Specification
Details
Nominal voltage
24 V
Capacity (20-hour discharge)
200 Ah
Weight
37 kg
Terminal position
1
Terminal type
M8
Technology
LITHIUM
Dimensions (h × w × d)
235 × 162 × 648 mm
Part number
BAT524120620
Download datasheet (PDF)
Victron Lithium LiFePO4 25.6V 200Ah Smart – Long-life LiFePO4 lithium batteryThe Victron Lithium LiFePO4 25.6V 200Ah Smart is a LiFePO4 lithium battery from Victron Energy with a capacity of 200 Ah and a nominal voltage of 24 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
Capacity 200 Ah: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
Nominal voltage 24 V: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS, which protects the cells against over- and undervoltage.
Application
Campervans and caravans, where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar power systems in summer houses and off-grid installations.
Specifications
Specification
Details
Nominal voltage
24 V
Capacity (20-hour discharge)
200 Ah
Weight
45.5 kg
Terminal type
M8
Technology
LITHIUM
Dimensions (h × w × d)
220 × 710 × 390 mm
Item number
BAT524120610
Download datasheet (PDF)
Victron Cable male to female 3-pole 2 m – original Victron accessoryThe Victron Cable male to female 3-pole 2 m is an original accessory from Victron Energy. It integrates directly into the Victron system and is built to withstand demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits the Victron system directly without modification.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits the Victron system directly.
Camper van, boat, summer house, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Weight
0.112 kg
Part number
ASS030560200
Victron Smart Battery Protect 12/24V-65A – electronic battery protectionThe Victron Smart Battery Protect 12/24V-65A is an electronic battery protection device from Victron Energy. It disconnects consumers before the battery is discharged so deeply that it sustains damage, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
Prevents deep discharge: Disconnects consumers before the battery is damaged.
Electronic and silent: No mechanical switches that can burn out or wear down.
Bluetooth built-in: Configure disconnection limits in the VictronConnect app.
Applications
Protection of the battery bank against deep discharge.
Automatic disconnection of loads at low voltage.
Motorhomes, boats, and off-grid systems.
Specifications
Specification
Details
Nominal voltage
12/24 V
Weight
0.24 kg
Dimensions (h × w × d)
106 × 48 × 40 mm
Item number
BPR065022000
Victron Smart Battery Protect 12/24V-220 – electronic battery protectionThe Victron Smart Battery Protect 12/24V-220 is an electronic battery protection device from Victron Energy. It disconnects consumers before the battery discharges so deeply that it suffers damage, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
Prevents deep discharge: Disconnects consumers before the battery is damaged.
Electronic and silent: No mechanical switches that can burn or wear out.
Bluetooth built-in: Set disconnection thresholds in the VictronConnect app.
Application
Protection of the battery bank against deep discharge.
Automatic disconnection of loads at low voltage.
Motorhomes, boats, and off-grid systems.
Specifications
Specification
Details
Nominal voltage
12/24 V
Weight
0.977 kg
Dimensions (h × w × d)
120 × 123 × 62 mm
Part number
BPR122022000
Victron Cable for Smart BMS CL 12-100 – original Victron accessoryThe Victron Cable for Smart BMS CL 12-100 is an original accessory from Victron Energy. It fits directly into the Victron system and is built to withstand the demanding environment of marine and vehicle applications.Advantages
Original Victron accessory: Fits the Victron system directly without any modifications.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Camper van, boat, summer cottage, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Input voltage
>13 A
Current consumption, remote on
16 mA (excluding load output and charge output current)
Current consumption, remote off
5 mA (BMS functionality still active)
Load disconnect output
Normally high (Vbat – 0.1 V) / Source current limit: 10 mA (short-circuit protected) / Sink current: 0 A (output free floating)
Charge disconnect output
Normally high (Vbat – 0.1 V) / Source current limit: 10 mA (short-circuit protected) / Sink current: 0 A (output free floating)
Pre-alarm output
Normally free floating / High (Vbat) in case of alarm, max. 1 A / (not short-circuit proof)
System on/off: Remote L and Remote H
Use modes: / ON when L and H terminals are interconnected / ON when L terminal is pulled to battery minus (V < 5 V) / ON when H terminal is high (V > 3 V) / OFF in all other conditions
Operating temperature range
-40 °C to +60 °C
Humidity
100 % / 95 %
Protection, electronics
IP65
DC power connection
M8
Mounting
10Nm
DC connector battery minus
Faston female, 6.3 mm
Weight
1.6 kg
Dimensions (h × w × d)
65 × 120 × 224 mm
Emission
EN 61000-6-3, EN 55014-1
Immunity
EN 61000-6-2, EN 61000-6-1, EN 55014-2
Automotive directive
ECE R10-5
Alternator port - max. charge current
100 A (with a 125 A fuse)
Part number
ASS070200100
Download datasheet (PDF)
Victron cable male to female 3-pole 5 m – original Victron accessoryThe Victron cable male to female 3-pole 5 m is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Benefits
Original Victron accessory: Fits directly into the Victron system without modification.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Motorhome, boat, summer house, and off-grid installations.
Safe and reliable installation.
Specifications
Specification
Details
Part number
ASS030560500
Victron Cable male to female 3-pole 3 m – original Victron accessoryThe Victron Cable male to female 3-pole 3 m is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Benefits
Original Victron accessory: Fits directly into the Victron system without modification.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Camper van, boat, summer house, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Part number
ASS030560300
Victron Battery Protect 12/24V-100A – electronic battery protectionThe Victron Battery Protect 12/24V-100A is an electronic battery protection device from Victron Energy. It disconnects consumers before the battery is discharged to a level that would cause damage.Benefits
Prevents deep discharge: Disconnects consumers before the battery is damaged.
Electronic and silent: No mechanical switches that can burn out or wear down.
Application
Protection of the battery bank against deep discharge.
Automatic disconnection of loads at low voltage.
Motorhomes, boats, and off-grid systems.
Specifications
Specification
Details
Nominal voltage
12/24 V
Weight
0.535 kg
Dimensions (h × w × d)
115 × 42 × 59 mm
Item number
BPR000100400
Victron Lithium LiFePO4 12.8V 100Ah Smart – Long-life LiFePO4 lithium batteryThe Victron Lithium LiFePO4 12.8V 100Ah Smart is a LiFePO4 lithium battery from Victron Energy with a capacity of 100 Ah and a nominal voltage of 12 V. It weighs significantly less than a lead-acid battery with the same usable capacity, withstands many more cycles, and can be charged quickly. The battery must be used in conjunction with a Victron BMS.Advantages
100 Ah capacity: Real usable capacity — lithium can be deeply discharged without damaging its lifespan.
12 V nominal voltage: Fits directly into a Victron system.
Very low weight: A LiFePO4 battery typically weighs less than half of a lead-acid battery with the same usable capacity.
Requires BMS: Must be used with a Victron BMS, which protects the cells against over-voltage and under-voltage.
Application
Motorhomes and caravans, where weight and capacity are everything.
Boats with high power consumption and a need for fast charging.
Solar power systems in holiday homes and off-grid installations.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
100 Ah
Weight
15 kg
Terminal type
M8
Technology
LITHIUM
Dimensions (h × w × d)
197 × 152 × 321 mm
Item number
BAT512110610
Download datasheet (PDF)
Victron SmartBattery Protect 12/24V-100A – electronic battery protectionThe Victron SmartBattery Protect 12/24V-100A is an electronic battery protection device from Victron Energy. It disconnects consumers before the battery is discharged to a level that would cause damage, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
Prevents deep discharge: Disconnects consumers before the battery is damaged.
Electronic and silent: No mechanical switches that can burn or wear out.
Bluetooth built-in: Configure disconnection limits in the VictronConnect app.
Application
Protection of the battery bank against deep discharge.
Automatic disconnection of consumers at low voltage.
Motorhomes, boats, and off-grid systems.
Specifications
Specification
Details
Nominal voltage
12/24 V
Weight
0.535 kg
Dimensions (h × w × d)
115 × 42 × 59 mm
Item number
BPR110022000
Victron BCD 402 2 batteries 40A Diode battery combiner – charging relay for two battery banksThe Victron BCD 402 2 batteries 40A Diode battery combiner is a charging relay from Victron Energy that charges two battery banks from the same source. The banks are automatically connected during charging and separated again afterwards, so the starter battery is never drained by the power consumption.Advantages
Automatic separation: Connects battery banks during charging and separates them again when charging stops.
Protects the starter battery: The load cannot drain the starter battery, ensuring the engine can always be started.
Simple installation: No programming — the unit operates automatically based on voltage.
Applications
Charging of starter battery and service battery from the same source.
Camper vans and boats with two or more battery banks.
Simple installation without programming.
Specifications
Specification
Details
Nominal voltage
6/12/24 V
Weight
0.52 kg
Dimensions (h × w × d)
75 × 120 × 60 mm
Part number
BCD000402000
Download datasheet (PDF)
Victron Cable male to female 3-pole 1 m – original Victron accessoryThe Victron Cable male to female 3-pole 1 m is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits directly into the Victron system without modification.
Reliable quality: Materials and workmanship that last in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Motorhome, boat, summer cottage, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Weight
0.066 kg
Item number
ASS030560100
Victron Battery Protect 12/24V-220A – electronic battery protectionThe Victron Battery Protect 12/24V-220A is an electronic battery protection device from Victron Energy. It disconnects consumers before the battery is discharged so deeply that it becomes damaged.Advantages
Prevents deep discharge: Disconnects consumers before the battery is damaged.
Electronic and silent: No mechanical switches that can burn out or wear down.
Applications
Protection of the battery bank against deep discharge.
Automatic disconnection of loads at low voltage.
Camper vans, boats, and off-grid systems.
Specifications
Specification
Details
Nominal voltage
12/24 V
Weight
0.977 kg
Dimensions (h × w × d)
120 × 123 × 62 mm
Item number
BPR000220400
Victron Argodiode 80-2SC 2 BAT 80A – battery isolator for charging two battery banksThe Victron Argodiode 80-2SC 2 BAT 80A is a battery isolator from Victron Energy that allows for charging two battery banks from a single source. The banks are connected automatically during charging and isolated again afterwards, ensuring the starter battery is never drained by the power consumption.Benefits
Automatic isolation: Connects the battery banks during charging and disconnects them when charging stops.
Protects the starter battery: Power consumption cannot drain the starter battery, so the engine can always be started.
Simple installation: No programming — the device operates automatically based on voltage.
Applications
Charging a starter battery and a service battery from the same source.
Camper vans and boats with two or more battery banks.
Simple installation without programming.
Specifications
Specification
Details
Nominal voltage
6/12/24 V
Weight
0.698 kg
Dimensions (h × w × d)
75 × 120 × 60 mm
Part number
ARG080202000R
Download datasheet (PDF)
Victron Argodiode 160-2AC 2 BAT 160A – battery isolator for charging two battery banksThe Victron Argodiode 160-2AC 2 BAT 160A is a battery isolator from Victron Energy that charges two battery banks from a single source. The banks are connected automatically during charging and separated again afterwards, ensuring the starter battery is never drained by consumption.Advantages
Automatic separation: Connects battery banks during charging and separates them again when charging stops.
Protects the starter battery: Power consumption cannot drain the starter battery, so the engine can always be started.
Simple installation: No programming required — the unit operates automatically based on voltage.
Applications
Charging a starter battery and a service battery from the same source.
Motorhomes and boats with two or more battery banks.
Simple installation without programming.
Specifications
Specification
Details
Rated voltage
6/12/24 V
Weight
1.3 kg
Dimensions (h × w × d)
150 × 120 × 60 mm
Item number
ARG160201020
Download datasheet (PDF)
Victron Battery Protect 48V-100A – electronic battery protectionThe Victron Battery Protect 48V-100A is an electronic battery protection device from Victron Energy. It disconnects consumers before the battery discharges to a point where it could be damaged.Advantages
Prevents deep discharge: Disconnects consumers before the battery sustains damage.
Electronic and silent: No mechanical switches that can burn out or wear down.
Applications
Protecting the battery bank against deep discharge.
Automatic disconnection of loads at low voltage.
Camper vans, boats, and off-grid systems.
Specifications
Specification
Details
Nominal voltage
48 V
Part number
BPR110048000
Victron Battery Protect 12/24V-65A – electronic battery protectionThe Victron Battery Protect 12/24V-65A is an electronic battery protection device from Victron Energy. It disconnects consumers before the battery discharges to a level that would cause damage.Advantages
Prevents deep discharge: Disconnects consumers before the battery is damaged.
Electronic and silent: No mechanical switches that can burn out or wear down.
Application
Protection of the battery bank against deep discharge.
Automatic disconnection of loads during low voltage.
Motorhomes, boats, and off-grid systems.
Specifications
Specification
Details
Nominal voltage
12/24 V
Weight
0.24 kg
Dimensions (h × w × d)
106 × 48 × 40 mm
Item number
BPR000065400
Victron Battery Protect 48V-100A – electronic battery protectionThe Victron Battery Protect 48V-100A is an electronic battery protection device from Victron Energy. It disconnects loads before the battery is discharged to a point where it would be damaged.Advantages
Prevents deep discharge: Disconnects loads before the battery is damaged.
Electronic and silent: No mechanical switches that can burn out or wear down.
Application
Protection of the battery bank against deep discharge.
Automatic load disconnection at low voltage.
Motorhomes, boats, and off-grid systems.
Specifications
Specification
Details
Nominal voltage
48 V
Weight
1.3 kg
Dimensions (h × w × d)
120 × 123 × 62 mm
Part number
BPR048100400
Victron Argofet battery isolator 100A-2 BAT – battery isolator for charging two battery banksThe Victron Argofet 100A-2 BAT is a battery isolator from Victron Energy that allows charging two battery banks from the same source. The banks are automatically connected during charging and separated again afterwards, ensuring the starter battery is never drained by electrical consumption.Advantages
Automatic separation: Connects the battery banks during charging and separates them when charging stops.
Protects the starter battery: Electrical consumption cannot drain the starter battery, so the engine can always be started.
Simple installation: No programming required — the unit operates automatically based on voltage.
Applications
Charging a starter battery and a service battery from the same source.
Motorhomes and boats with two or more battery banks.
Simple installation without programming.
Specifications
Specification
Details
Nominal voltage
6/12/24 V
Weight
1.1 kg
Dimensions (h × w × d)
150 × 120 × 60 mm
Item number
ARG100201020R
Download datasheet (PDF)
Victron BCD 802 2 batteries 80A Diode battery combiner – battery isolator for charging two battery banksThe Victron BCD 802 2 batteries 80A Diode battery combiner is an isolator from Victron Energy that charges two battery banks from the same source. The banks are automatically connected during charging and separated again afterwards, so the starter battery is never drained by the power consumption.Benefits
Automatic separation: Connects the battery banks during charging and separates them again when charging stops.
Protects the starter battery: The power consumption cannot drain the starter battery, so the engine can always be started.
Simple installation: No programming — the unit operates automatically based on voltage.
Application
Charging of starter battery and service battery from the same source.
Camper van and boat with two or more battery banks.
Simple installation without programming.
Specifications
Specification
Details
Nominal voltage
6/12/24 V
Weight
0.52 kg
Dimensions (h × w × d)
75 × 120 × 60 mm
Part number
BCD000802000
Download datasheet (PDF)
Victron Lynx Smart BMS 500 NG (M10) – Battery management system for lithium batteriesThe Victron Lynx Smart BMS 500 NG (M10) is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Benefits
Protects cells: Disconnects charging and discharging in case of excessively high or low cell voltage.
Controls the entire system: Sends a signal to the inverter, charger, and MPPT so they react before the battery is damaged.
For Victron LiFePO4: Designed for Victron Smart Lithium batteries and their cell balancing.
Bluetooth built-in: View cell voltages and status in the VictronConnect app.
Application
Protection of Victron LiFePO4 batteries against over- and undervoltage.
Lithium systems with inverter, charger, and MPPT from Victron.
Safe operation of lithium banks in boats and motorhomes.
Specifications
Specification
Details
Supply voltage range
9 – 60Vdc
Supported system voltages
12, 24, or 48V
Reverse polarity protection
No
Main safety contactor continuous current rating
500 A continuous
Main safety contactor peak current rating
600 A for 5 minutes
Power consumption OFF state
0.3 mA for all system voltages
Power consumption in Standby state
Approximately 0.6 W (50 mA at 12V)
Power consumption in ON state
Approximately 2.6 W (217 mA at 12V) depending on state of relays
Min. load resistance for pre-charging
10Ω and above for 12V systems / 20Ω and above for 24V and 48V systems
AUX output max. current rating
1.1 A continuous, protected by resettable fuse
Allow-to-charge port max. current rating
0.5 A at 60Vdc, protected by resettable fuse
Allow-to-discharge port max. current rating
0.5 A at 60Vdc, protected by resettable fuse
Programmable relay (SPDT) max. current rating
2 A at 60Vdc
Weight
2.2 kg
Technology
LITHIUM
Dimensions (h × w × d)
80 × 186 × 170 mm
Item number
LYN034160310
Download datasheet (PDF)
The entire Victron Energy range: MultiPlus and Quattro inverter/chargers, SmartSolar MPPT controllers, EasySolar all-in-one, Phoenix inverters, Orion DC-DC converters, battery chargers and accessories. Use the submenu to go directly to a product series.
