The entire Victron Energy range: MultiPlus and Quattro inverter/chargers, SmartSolar MPPT controllers, EasySolar all-in-one, Phoenix inverters, Orion DC-DC converters, battery chargers and accessories.
Victron SmartSolar MPPT 100/20 – MPPT solar charge controller for efficient solar chargingThe Victron SmartSolar MPPT 100/20 is an MPPT solar charge controller from Victron Energy for 12V, 24V, or 48V battery banks. It regulates the output of the solar panels, handles a PV open-circuit voltage of up to 100 V, and built-in Bluetooth allows you to monitor operation and change settings directly from the VictronConnect app.Advantages
Built-in Bluetooth: Setup, monitoring, and firmware updates are performed wirelessly in the VictronConnect app — no extra display required.
Up to 98% efficiency: The MPPT tracker continuously adjusts the operating point so that the panels perform optimally under changing light conditions.
Automatic voltage detection: The controller automatically detects whether the battery bank is 12V, 24V, or 48V.
Multiple charging algorithms and user-defined profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 100 V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and use longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be installed in technical rooms, boats, motorhomes, and caravans.
Applications
Motorhomes, caravans, and vans with roof-mounted solar panels.
Boats, where the service battery needs to be kept fully charged throughout the season.
Summer houses, allotments, and site huts without a fixed grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V, 24V, or 48V
Max. battery current
20 A
Nominal PV power, 12V
290 W
Nominal PV power, 24V
580 W
Nominal PV power, 48V
1160 W
Max. PV short-circuit current
20 A
Automatic load disconnect
Yes
Max. PV open-circuit voltage
100 V
Max. efficiency
98 %
Self-consumption
12V: 25 mA / 24V / 48V: 15 mA
Charge voltage absorption
14.4 V / 28.8 V / 57.6 V (adjustable)
Charge voltage float
13.8 V / 27.6 V / 55.2 V (adjustable)
Charge voltage equalization
16.2 V / 32.4 V / 64.8 V (adjustable)
Charging algorithm
Multi-stage adaptive or user-defined algorithm
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C / 48V: -64 mV/°C
Continuous load current
12V & 24V: 20 A / 48V: 1 A
Low voltage load disconnect
11.1 V / 22.2 V / 44.4 V or 11.8 V / 23.6 V / 47.2 V or BatteryLife algorithm
Low voltage load reconnect
13.1 V / 26.2 V / 52.4 V or 14 V / 28 V / 56 V or BatteryLife algorithm
Protection
PV reverse polarity, output short-circuit, over-temperature
Operating temperature
-30 °C to +60 °C (full performance up to 40 °C)
Humidity
100 %, non-condensing
Max. altitude
5000 m (full performance up to 2000 m)
Environmental conditions
indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port 4 / Bluetooth, via VictronConnect app
Color
blue (RAL 5012)
Power terminals
6 mm² / AWG10
Protection class
IP43 (electronics), IP22 (connection area)
Weight
0.65 kg
Dimensions (h × w × d)
100 × 131 × 60 mm
Safety
EN/IEC 62109-1 / UL 1741 / CSA C22.2 NO.107,1-16
Nominal voltage
12/24/48 V
Part number
SCC110020160R
Download datasheet (PDF)
Victron SmartSolar MPPT 150/35 – MPPT solar charge controller for efficient solar chargingThe Victron SmartSolar MPPT 150/35 is an MPPT solar charge controller from Victron Energy for 12V / 24V / 48V automatic selection, 36V: Manual select battery banks. It regulates the output of the solar panels, handles a PV open-circuit voltage of up to 150 V, and built-in Bluetooth allows you to monitor operation and change settings directly from the VictronConnect app.Advantages
Built-in Bluetooth: Setup, monitoring, and firmware updates are performed wirelessly in the VictronConnect app — no extra display required.
Up to 98% efficiency: The MPPT tracking continuously adjusts the operating point so the panels perform optimally under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12V / 24V / 48V automatic selection, 36V: Manual select.
Multiple charging algorithms and custom profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 150 V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and use longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be mounted in technical rooms, boats, motorhomes, and site huts.
Application
Motorhome, caravan, and van with roof-mounted solar panel.
Boat, where the service battery needs to be kept fully charged throughout the season.
Summer cottage, allotment, and site hut without fixed grid connection.
Specifications
Specification
Details
Battery voltage
12V / 24V / 48V automatic selection, 36V: Manual select
Max. battery current
35 A
Rated solar power, 12V
500 W
Rated solar power, 24V
1000 W
Rated solar power, 36V
1500 W
Rated solar power, 48V
2000 W
Max. PV short-circuit current
35 A
Max. PV open-circuit voltage
150 V
Max. efficiency
98 %
Self-consumption
12V: 20 mA / 24V: 15 mA / 48V: 10 mA
Absorption charge voltage
Default setting: 14,4 V / 28.V / 43,2 V 57,6 V (adjustable)
Float charge voltage
Default setting: 13,8 V / 27,6 V 14,4 V / 55,2 V (adjustable)
Equalization charge voltage
Default setting: 16,2 V / 32,4 V / 48,6 V / 64,8 V (adjustable)
Charging algorithm
Multi-stage adaptive (eight pre-programmed algorithms) or custom algorithm
Temperature compensation
-16 mV/°C / -32 mV/°C / -64 mV/°C
Protection
PV reverse polarity, output short circuit, over-temperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
95 %, non-condensing
Max. altitude
5000 m (full output up to 2000 m)
Environmental conditions
indoor, unheated (type 1)
Pollution degree
PD2
Data communication
VE.Direct 4 / Bluetooth, via VictronConnect app
Color
blue (RAL 5012)
Power terminals
16 mm² / AWG6
Protection class
IP43 (electronics), IP22 (connection area)
Weight
1,25 kg
Dimensions (h × w × d)
130 × 186 × 70 mm
Safety
EN/IEC 62109-1/ UL 1741 / CSA C22.2 NO.107,1-16
Rated voltage
12/24/48 V
Item number
SCC115035210
Download datasheet (PDF)
Victron SmartSolar MPPT 150/45 – MPPT solar charge controller for efficient solar chargingThe Victron SmartSolar MPPT 150/45 is an MPPT solar charge controller from Victron Energy for 12V / 24V / 48V automatic selection, 36V: Manual select battery banks. It regulates the solar panel output, handles a PV open-circuit voltage of up to 150 V, and built-in Bluetooth allows you to monitor operation and change settings directly from the VictronConnect app.Benefits
Built-in Bluetooth: Setup, monitoring, and firmware updates are performed wirelessly in the VictronConnect app — no extra display required.
Up to 98% efficiency: The MPPT tracking continuously adjusts the operating point so that the panels perform optimally under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12V / 24V / 48V (automatic selection) or 36V (manual select).
Multiple charging algorithms and custom profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 150 V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and run longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be installed in utility rooms, boats, motorhomes, and site trailers.
Application
Motorhomes, caravans, and vans with roof-mounted solar panels.
Boats, where the service battery needs to be kept fully charged throughout the season.
Summer houses, allotment gardens, and site trailers without a permanent grid connection.
Specifications
Specification
Details
Battery voltage
12V / 24V / 48V automatic selection, 36V: Manual select
Max. battery current
45 A
Nominal solar power, 12V
650 W
Nominal solar power, 24V
1300 W
Nominal solar power, 36V
1950 W
Nominal solar power, 48V
2600 W
Max. PV short-circuit current
45 A
Max. PV open-circuit voltage
150 V
Max. efficiency
98 %
Self-consumption
12V: 20 mA / 24V: 15 mA / 48V: 10 mA
Absorption charge voltage
Default setting: 14.4 V / 28.8 V / 43.2 V / 57.6 V (adjustable)
Float charge voltage
Default setting: 13.8 V / 27.6 V / 41.4 V / 55.2 V (adjustable)
Equalization charge voltage
Default setting: 16.2 V / 32.4 V / 48.6 V / 64.8 V (adjustable)
Charge algorithm
Multi-stage adaptive (eight pre-programmed algorithms) or custom algorithm
Temperature compensation
-16 mV/°C / -32 mV/°C / -64 mV/°C
Protection
PV reverse polarity, output short circuit, over-temperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
95 %, non-condensing
Max. altitude
5000 m (full output up to 2000 m)
Environmental conditions
indoor, unheated (type 1)
Pollution degree
PD2
Data communication
VE.Direct / Bluetooth, via VictronConnect app
Color
blue (RAL 5012)
Power terminals
16 mm² / AWG6
Protection class
IP43 (electronics), IP22 (connection area)
Weight
1.25 kg
Dimensions (h × w × d)
130 × 186 × 70 mm
Safety
EN/IEC 62109-1 / UL 1741 / CSA C22.2 NO.107.1-16
Nominal voltage
12/24/48 V
Item number
SCC115045212
Download datasheet (PDF)
Victron SmartSolar MPPT 150/60-Tr – MPPT solar charge controller for efficient solar chargingThe Victron SmartSolar MPPT 150/60-Tr is an MPPT solar charge controller from Victron Energy for 12/24/48V automatic selection, 36V: manual select battery banks. It regulates the performance of the solar panels, handles a PV open circuit voltage of up to 150 V absolute maximum coldest conditions / 145 V start-up and operating maximum, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
Built-in Bluetooth: Setup, monitoring, and firmware updates are performed wirelessly in the VictronConnect app — without the need for an extra display.
Up to 98% efficiency: MPPT tracking continuously adjusts the operating point so that the panels perform at their best under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12/24/48V automatic selection, 36V: manual select.
Multiple charging algorithms and user-defined profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 150 V absolute maximum coldest conditions / 145 V start-up and operating maximum PV open circuit voltage: Provides the freedom to connect multiple panels in series and run longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be mounted in technical rooms, boats, motorhomes, and caravans.
Application
Motorhome, caravan, and van with solar panel on the roof.
Boat, where the service battery needs to be kept fully charged throughout the season.
Holiday home, allotment garden, and caravan without a fixed grid connection.
Specifications
Specification
Details
Battery voltage
12/24/48V automatic selection, 36V: manual select
Max. battery current
60 A
Rated solar power, 12V
860 W
Rated solar power, 24V
1720 W
Rated solar power, 36V
2580 W
Rated solar power, 48V
3440 W
Max. PV short-circuit current
50 A
Max. PV open circuit voltage
150 V absolute maximum coldest conditions / 145 V start-up and operating maximum
Max. efficiency
98 %
Self-consumption
12V: less than 35 mA / 48V: less than 20 mA
Charging voltage absorption
Default setting: 14.4 V / 28.8 V / 43.2 V / 57.6 V
Charging voltage float
Default setting: 13.8 V / 27.6 V / 41.4 V / 55.2 V
Charging voltage equalization
Default setting: 16.2 V / 32.4 V / 48.6 V / 64.8 V
Charging algorithm
Multi-stage adaptive (eight pre-programmed algorithms) or user-defined algorithm
Temperature compensation
-16 mV/°C / -32 mV/°C / -64 mV/°C
Protection
PV reverse polarity / short circuit on output / over-temperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
95 %, non-condensing
Max. altitude above sea level
5000 m (full output up to 2000 m)
Environmental conditions
indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port 4 / Bluetooth, via VictronConnect app
Remote on/off
Yes, 2 pole terminals
Programmable relay
DPST AC rating: 4 A up to 240Vac / DC rating: 4 A up to 35Vdc, 1 A up to 60Vdc
Parallel operation
Yes, but not synchronized
Color
blue (RAL 5012)
PV terminals
Tr models: 35 mm² / AWG2 / MC4 models: 2 pairs of MC4 connectors
Battery terminals
35 mm² / AWG2
Enclosure class
IP43 (electronics), IP22 (connection area)
Weight
3 kg
Dimensions (h × w × d)
Tr models: 185 × 250 × 95 mm / MC4 models: 215 × 250 × 95 mm
Safety
EN/IEC 62109-1, UL 1741, CSA C22.2
Nominal voltage
12/24/48 V
Item number
SCC115060211
Download datasheet (PDF)
Victron SmartSolar MPPT 100/30 – MPPT solar charge controller for efficient solar chargingThe Victron SmartSolar MPPT 100/30 is an MPPT solar charge controller from Victron Energy for 12V and 24V battery banks. It delivers up to 30 A of charging current, handles a PV open-circuit voltage of up to 100 V, and built-in Bluetooth allows you to monitor operation and change settings directly from the VictronConnect app.Benefits
Up to 30 A charging current: Handles 440 W at 12V and 880 W at 24V solar panel power.
Built-in Bluetooth: Setup, monitoring, and firmware updates take place wirelessly in the VictronConnect app — no extra display required.
Up to 98% efficiency: The MPPT tracker continuously adjusts the operating point so that the panels perform at their best in changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12V or 24V.
Multiple charging algorithms and user-defined profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 100 V PV open-circuit voltage: Gives you the freedom to connect multiple panels in series and use longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be installed in technical rooms, boats, motorhomes, and site huts.
Application
Motorhomes, caravans, and vans with roof-mounted solar panels.
Boats where the service battery needs to be kept fully charged throughout the season.
Summer houses, allotment gardens, and site huts without a grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V or 24V
Nominal charging current
30 A
Nominal solar power, 12V
440 W
Nominal solar power, 24V
880 W
Max. PV open-circuit voltage
100 V
Max. PV short-circuit current
35 A
Max. efficiency
98 %
Self-consumption
12V: 30 mA / 24V: 20 mA
Charging algorithm
Multi-stage adaptive (eight pre-programmed algorithms) or user-defined algorithm
Charging voltage absorption
14.4 V / 28.8 V (adjustable)
Charging voltage float
13.8 V / 27.6 V (adjustable)
Charging voltage equalization
16.2 V / 28.8 V (adjustable)
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C
Protection
Output short circuit, overtemperature
Operating temperature
-30 °C to +60 °C (full performance up to 40 °C)
Humidity
95 %, non-condensing
Max. altitude
5000 m (full performance up to 2000 m)
Ambient conditions
Indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port 4 / Bluetooth, via VictronConnect app
Color
blue (RAL 5012)
Power terminals
16 mm² / AWG6
Protection class
IP43 (electronics), IP22 (connection area)
Weight
1.3 kg
Dimensions (h × w × d)
130 × 186 × 70 mm
Safety
EN/IEC 62109-1, UL 1741, CSA C22.2
Nominal voltage
12/24/48 V
Part number
SCC110030210
Download datasheet (PDF)
Victron BlueSolar MPPT 100/50 – MPPT solar charge controller for efficient solar chargingThe Victron BlueSolar MPPT 100/50 is an MPPT solar charge controller from Victron Energy for 12V and 24V battery banks. It delivers up to 50 A of charging current and handles a PV open-circuit voltage of up to 100 V.Benefits
Up to 50 A charging current: Handles 700 W at 12V and 1400 W at 24V solar power.
Up to 98% efficiency: The MPPT tracking continuously adjusts the operating point so that the panels perform optimally under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12V or 24V.
Multiple charging algorithms and user-defined profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 100 V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and run longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be mounted in technical rooms, boats, campers, and caravans.
Application
Camper, caravan, and van with roof-mounted solar panels.
Boat, where the service battery needs to be kept fully charged throughout the season.
Summer house, allotment garden, and mobile home without a permanent grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V or 24V
Rated charging current
50 A
Rated solar power, 12V
700 W
Rated solar power, 24V
1400 W
Max. PV open-circuit voltage
100 V
Max. PV short-circuit current
60 A
Max. efficiency
98 %
Self-consumption
12V: 30 mA / 24V: 20 mA
Charging algorithm
Multi-stage adaptive (eight pre-programmed algorithms) or user-defined algorithm
Absorption charge voltage
14.4 V / 28.8 V (adjustable)
Float charge voltage
13.8 V / 27.6 V (adjustable)
Equalization charge voltage
16.2 V / 28.8 V (adjustable)
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C
Protection
short circuit on output, over-temperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
95 %, non-condensing
Max. altitude
5000 m (full output up to 2000 m)
Ambient conditions
indoor, unheated (type 1)
Pollution degree
PD2
Data communication
VE.Direct port
Color
blue (RAL 5012)
Power terminals
16 mm² / AWG6
Enclosure class
IP43 (electronics), IP22 (connection area)
Weight
1.3 kg
Dimensions (h × w × d)
130 × 186 × 70 mm
Safety
EN/IEC 62109-1, UL 1741, CSA C22.2
Rated voltage
12/24/48 V
Part number
SCC020050200
Download datasheet (PDF)
Victron BlueSolar MPPT 100/15 – MPPT solar charge controller for efficient solar chargingThe Victron BlueSolar MPPT 100/15 is an MPPT solar charge controller from Victron Energy for 12V, 24V, or 48V battery banks. It regulates the output of the solar panels and handles a PV open-circuit voltage of up to 100 V.Advantages
Up to 98% efficiency: The MPPT tracking continuously adjusts the operating point so that the panels perform optimally under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12V, 24V, or 48V.
Multiple charging algorithms and user-defined profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 100 V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and run longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be mounted in technical rooms, boats, campers, and site caravans.
Application
Camper, caravan, and van with a solar panel on the roof.
Boat, where the service battery needs to be kept fully charged throughout the season.
Summer house, allotment garden, and site caravan without a fixed grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V, 24V, or 48V
Max. battery current
15 A
Nominal solar power, 12V
220 W
Nominal solar power, 24V
440 W
Max. PV short-circuit current
15 A
Automatic load disconnect
Yes
Max. PV open-circuit voltage
100 V
Max. efficiency
98 %
Self-consumption
12V: 25 mA / 24V / 48V: 15 mA
Absorption charge voltage
14.4 V / 28.8 V / 57.6 V (adjustable)
Float charge voltage
13.8 V / 27.6 V / 55.2 V (adjustable)
Equalization charge voltage
16.2 V / 32.4 V / 64.8 V (adjustable)
Charge algorithm
Multi-stage adaptive or user-defined algorithm
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C / 48V: -64 mV/°C
Continuous load current
12V & 24V: 20 A / 48V: 1 A
Low voltage load disconnect
11.1 V / 22.2 V / 44.4 V or 11.8 V / 23.6 V / 47.2 V or BatteryLife algorithm
Low voltage load reconnect
13.1 V / 26.2 V / 52.4 V or 14 V / 28 V / 56 V or BatteryLife algorithm
Protection
PV reverse polarity, output short circuit, over-temperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
100 %, non-condensing
Max. altitude
5000 m (full output up to 2000 m)
Environmental conditions
indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port
Color
blue (RAL 5012)
Power terminals
6 mm² / AWG10
Protection class
IP43 (electronics), IP22 (connection area)
Weight
0.65 kg
Dimensions (h × w × d)
100 × 131 × 60 mm
Safety
EN/IEC 62109-1 / UL 1741 / CSA C22.2 NO.107,1-16
Nominal voltage
12/24 V
Item number
SCC010015200R
Download datasheet (PDF)
Victron BlueSolar MPPT 100/30 – MPPT solar charge controller for efficient solar chargingThe Victron BlueSolar MPPT 100/30 is an MPPT solar charge controller from Victron Energy for 12V and 24V battery banks. It delivers up to 30 A of charging current and handles a PV open-circuit voltage of up to 100 V.Advantages
Up to 30 A charging current: Handles 440 W at 12V and 880 W at 24V solar power.
Up to 98% efficiency: The MPPT tracking continuously adjusts the operating point so the panels perform optimally under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12V or 24V.
Multiple charging algorithms and user-defined profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 100 V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and use longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be mounted in technical rooms, boats, campers, and site huts.
Application
Camper, caravan, and van with a solar panel on the roof.
Boat, where the service battery needs to be kept fully charged throughout the season.
Summer cottage, allotment garden, and site hut without fixed grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V or 24V
Rated charging current
30 A
Rated solar power, 12V
440 W
Rated solar power, 24V
880 W
Max. PV open-circuit voltage
100 V
Max. PV short-circuit current
35 A
Max. efficiency
98 %
Self-consumption
12V: 30 mA / 24V: 20 mA
Charging algorithm
Multi-stage adaptive (eight pre-programmed algorithms) or user-defined algorithm
Absorption charge voltage
14.4 V / 28.8 V (adjustable)
Float charge voltage
13.8 V / 27.6 V (adjustable)
Equalization charge voltage
16.2 V / 28.8 V (adjustable)
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C
Protection
Output short circuit, over-temperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
95 %, non-condensing
Max. altitude
5000 m (full output up to 2000 m)
Environmental conditions
Indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port
Color
blue (RAL 5012)
Power terminals
16 mm² / AWG6
Protection class
IP43 (electronics), IP22 (connection area)
Weight
1.3 kg
Dimensions (h × w × d)
130 × 186 × 70 mm
Safety
EN/IEC 62109-1, UL 1741, CSA C22.2
Rated voltage
12/24/48 V
Item number
SCC020030200
Download datasheet (PDF)
Victron BlueSolar MPPT 100/20 – MPPT solar charge controller for efficient solar chargingThe Victron BlueSolar MPPT 100/20 is an MPPT solar charge controller from Victron Energy for 12V, 24V, or 48V battery banks. It regulates the performance of solar panels and handles a PV open-circuit voltage of up to 100 V.Advantages
Up to 98% efficiency: The MPPT tracking continuously adjusts the operating point so that the panels perform optimally under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12V, 24V, or 48V.
Multiple charging algorithms and custom profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 100 V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and run longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be mounted in technical rooms, boats, motorhomes, and site trailers.
Application
Motorhomes, caravans, and vans with solar panels on the roof.
Boats where the service battery needs to be kept fully charged throughout the season.
Summer cottages, allotments, and site trailers without a fixed grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V, 24V, or 48V
Max. battery current
20 A
Rated solar power, 12V
290 W
Rated solar power, 24V
580 W
Rated solar power, 48V
1160 W
Max. PV short-circuit current
20 A
Automatic load disconnect
Yes
Max. PV open-circuit voltage
100 V
Max. efficiency
98 %
Self-consumption
12V: 25 mA / 24V / 48V: 15 mA
Absorption charge voltage
14.4 V / 28.8 V / 57.6 V (adjustable)
Float charge voltage
13.8 V / 27.6 V / 55.2 V (adjustable)
Equalization charge voltage
16.2 V / 32.4 V / 64.8 V (adjustable)
Charging algorithm
Multi-stage adaptive or custom algorithm
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C / 48V: -64 mV/°C
Continuous load current
12V & 24V: 20 A / 48V: 1 A
Low voltage load disconnect
11.1 V / 22.2 V / 44.4 V or 11.8 V / 23.6 V / 47.2 V or BatteryLife algorithm
Low voltage load reconnect
13.1 V / 26.2 V / 52.4 V or 14 V / 28 V / 56 V or BatteryLife algorithm
Protection
PV reverse polarity, output short-circuit, over-temperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
100 %, non-condensing
Max. altitude
5000 m (full output up to 2000 m)
Environmental conditions
indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port
Color
blue (RAL 5012)
Power terminals
6 mm² / AWG10
Ingress protection rating
IP43 (electronics), IP22 (connection area)
Weight
0.65 kg
Dimensions (h × w × d)
100 × 131 × 60 mm
Safety
EN/IEC 62109-1 / UL 1741 / CSA C22.2 NO.107.1-16
Nominal voltage
12/24/48 V
Item number
SCC110020170R
Download datasheet (PDF)
Victron BlueSolar MPPT 75/10 – MPPT solar charge controller for efficient solar chargingThe Victron BlueSolar MPPT 75/10 is an MPPT solar charge controller from Victron Energy for 12V and 24V battery banks. It regulates the output of the solar panels and handles a PV open-circuit voltage of up to 75 V.Benefits
Up to 98% efficiency: The MPPT tracking continuously adjusts the operating point so that the panels perform optimally under changing light conditions.
Automatic voltage detection: The controller automatically detects whether the battery bank is 12V or 24V.
Multiple charging algorithms and user-defined profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 75 V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and run longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be installed in utility rooms, boats, motorhomes, and site huts.
Application
Motorhome, caravan, and van with a solar panel on the roof.
Boat, where the service battery needs to be kept topped up throughout the season.
Summer house, allotment garden, and site hut without a permanent grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V or 24V
Max. battery current
10 A
Rated solar power, 12V
145 W
Rated solar power, 24V
290 W
Max. PV short-circuit current
10 A
Automatic load disconnect
Yes
Max. PV open-circuit voltage
75 V
Max. efficiency
98%
Self-consumption
12V: 20 mA / 24V: 10 mA
Absorption charge voltage
14.4 V / 28.8 V / 57.6 V (adjustable)
Float charge voltage
13.8 V / 27.6 V / 55.2 V (adjustable)
Equalization charge voltage
16.2 V / 32.4 V / 64.8 V (adjustable)
Charge algorithm
Multi-stage adaptive or user-defined algorithm
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C / 48V: -64 mV/°C
Continuous load current
15 A
Low voltage load disconnect
11.1 V / 22.2 V / 44.4 V or 11.8 V / 23.6 V / 47.2 V or BatteryLife algorithm
Low voltage load reconnect
13.1 V / 26.2 V / 52.4 V or 14 V / 28 V / 56 V or BatteryLife algorithm
Protection
PV reverse polarity, output short-circuit, over-temperature
Operating temperature
-30 °C to +60 °C (full performance up to 40 °C)
Humidity
100%, non-condensing
Max. altitude
5000 m (full performance up to 2000 m)
Environmental conditions
indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port
Colour
blue (RAL 5012)
Power terminals
6 mm² / AWG10
Protection class
IP43 (electronics), IP22 (connection area)
Weight
0.5 kg
Dimensions (h × w × d)
100 × 113 × 40 mm
Safety
EN/ IEC 62109-1 / UL 1741 / CSA C22.2 NO.107,1-16
Rated voltage
12/24 V
Item number
SCC010010050R
Download datasheet (PDF)
Victron SmartSolar MPPT 75/15 – MPPT solar charge controller for efficient solar chargingThe Victron SmartSolar MPPT 75/15 is an MPPT solar charge controller from Victron Energy for 12V, 24V, or 48V battery banks. It regulates solar panel performance, handles a PV open-circuit voltage of up to 100 V, and built-in Bluetooth allows you to monitor operation and change settings directly from the VictronConnect app.Advantages
Built-in Bluetooth: Setup, monitoring, and firmware updates are done wirelessly in the VictronConnect app — without the need for an additional display.
Up to 98% efficiency: The MPPT tracker continuously adjusts the operating point so that the panels perform optimally under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12V, 24V, or 48V.
Multiple charging algorithms and custom profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 100 V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and use longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Suitable for mounting in utility rooms, boats, motorhomes, and site huts.
Application
Motorhome, caravan, and van with a solar panel on the roof.
Boat where the service battery needs to be kept fully charged throughout the season.
Summer house, allotment garden, and site hut without a permanent grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V, 24V, or 48V
Max. battery current
15 A
Rated solar power, 12V
220 W
Rated solar power, 24V
440 W
Max. PV short-circuit current
15 A
Automatic load disconnect
Yes
Max. PV open-circuit voltage
100 V
Max. efficiency
98 %
Self-consumption
12V: 25 mA / 24V / 48V: 15 mA
Charging voltage absorption
14.4 V / 28.8 V / 57.6 V (adjustable)
Charging voltage float
13.8 V / 27.6 V / 55.2 V (adjustable)
Charging voltage equalization
16.2 V / 32.4 V / 64.8 V (adjustable)
Charging algorithm
Multi-stage adaptive or custom algorithm
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C / 48V: -64 mV/°C
Continuous load current
12V & 24V: 20 A / 48V: 1 A
Low voltage load disconnect
11.1 V / 22.2 V / 44.4 V or 11.8 V / 23.6 V / 47.2 V or BatteryLife algorithm
Low voltage load reconnect
13.1 V / 26.2 V / 52.4 V or 14 V / 28 V / 56 V or BatteryLife algorithm
Protection
PV reverse polarity, output short circuit, over-temperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
100 %, non-condensing
Max. altitude
5000 m (full output up to 2000 m)
Environmental conditions
indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port 4 / Bluetooth, via VictronConnect app
Color
blue (RAL 5012)
Power terminals
6 mm² / AWG10
Enclosure rating
IP43 (electronics), IP22 (connection area)
Weight
0.6 kg
Dimensions (h × w × d)
100 × 113 × 50 mm
Safety
EN/IEC 62109-1 / UL 1741 / CSA C22.2 NO.107,1-16
Nominal voltage
12/24 V
Item number
SCC075015060R
Download datasheet (PDF)
Victron SmartSolar MPPT 100/15 – MPPT solar charge controller for efficient solar chargingThe Victron SmartSolar MPPT 100/15 is an MPPT solar charge controller from Victron Energy for 12V, 24V, or 48V battery banks. It regulates solar panel output, handles a PV open-circuit voltage of up to 100 V, and built-in Bluetooth allows you to monitor operation and change settings directly from the VictronConnect app.Advantages
Built-in Bluetooth: Setup, monitoring, and firmware updates are performed wirelessly in the VictronConnect app — without an additional display.
Up to 98% efficiency: The MPPT tracking continuously adjusts the operating point so the panels perform optimally under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12V, 24V, or 48V.
Multiple charging algorithms and custom profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 100 V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and run longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be mounted in technical rooms, boats, motorhomes, and caravans.
Application
Motorhome, caravan, and van with a solar panel on the roof.
Boat, where the service battery needs to be kept fully charged throughout the season.
Summer house, allotment garden, and caravan without a fixed grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V, 24V, or 48V
Max. battery current
15 A
Nominal solar power, 12V
220 W
Nominal solar power, 24V
440 W
Max. PV short-circuit current
15 A
Automatic load disconnect
Yes
Max. PV open-circuit voltage
100 V
Max. efficiency
98 %
Self-consumption
12V: 25 mA / 24V / 48V: 15 mA
Charge voltage absorption
14.4 V / 28.8 V / 57.6 V (adjustable)
Charge voltage float
13.8 V / 27.6 V / 55.2 V (adjustable)
Charge voltage equalization
16.2 V / 32.4 V / 64.8 V (adjustable)
Charge algorithm
Multi-stage adaptive or custom algorithm
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C / 48V: -64 mV/°C
Continuous load current
12V & 24V: 20 A / 48V: 1 A
Low voltage load disconnect
11.1 V / 22.2 V / 44.4 V or 11.8 V / 23.6 V / 47.2 V or BatteryLife algorithm
Low voltage load reconnect
13.1 V / 26.2 V / 52.4 V or 14 V / 28 V / 56 V or BatteryLife algorithm
Protection
PV reverse polarity, output short circuit, overtemperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
100 %, non-condensing
Max. altitude
5000 m (full output up to 2000 m)
Environmental conditions
indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port 4 / Bluetooth, via VictronConnect app
Color
blue (RAL 5012)
Power terminals
6 mm² / AWG10
Protection class
IP43 (electronics), IP22 (connection area)
Weight
0.65 kg
Dimensions (h × w × d)
100 × 131 × 60 mm
Safety
EN/IEC 62109-1 / UL 1741 / CSA C22.2 NO.107,1-16
Nominal voltage
12/24 V
Part number
SCC110015060R
Download datasheet (PDF)
Victron BlueSolar MPPT 75/15 – MPPT solar charge controller for efficient solar chargingThe Victron BlueSolar MPPT 75/15 is an MPPT solar charge controller from Victron Energy for 12V, 24V, or 48V battery banks. It regulates the performance of solar panels and handles a PV open-circuit voltage of up to 100 V.Advantages
Up to 98% efficiency: The MPPT tracking continuously adjusts the operating point so that the panels perform optimally under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12V, 24V, or 48V.
Multiple charging algorithms and custom profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 100 V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and run longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be mounted in technical rooms, boats, campervans, and site huts.
Application
Campervans, caravans, and vans with roof-mounted solar panels.
Boats, where the service battery needs to be kept fully charged throughout the season.
Summer cottages, allotments, and site huts without a fixed grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V, 24V, or 48V
Max. battery current
15 A
Nominal solar power, 12V
220 W
Nominal solar power, 24V
440 W
Max. PV short-circuit current
15 A
Automatic load disconnect
Yes
Max. PV open-circuit voltage
100 V
Max. efficiency
98 %
Self-consumption
12V: 25 mA / 24V / 48V: 15 mA
Absorption charging voltage
14.4 V / 28.8 V / 57.6 V (adjustable)
Float charging voltage
13.8 V / 27.6 V / 55.2 V (adjustable)
Equalization charging voltage
16.2 V / 32.4 V / 64.8 V (adjustable)
Charging algorithm
Multi-stage adaptive or user-defined algorithm
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C / 48V: -64 mV/°C
Continuous load current
12V & 24V: 20 A / 48V: 1 A
Low voltage load disconnect
11.1 V / 22.2 V / 44.4 V or 11.8 V / 23.6 V / 47.2 V or BatteryLife algorithm
Low voltage load reconnect
13.1 V / 26.2 V / 52.4 V or 14 V / 28 V / 56 V or BatteryLife algorithm
Protection
PV reverse polarity, output short-circuit, over-temperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
100 %, non-condensing
Max. altitude above sea level
5000 m (full output up to 2000 m)
Environmental conditions
indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port
Colour
blue (RAL 5012)
Power terminals
6 mm² / AWG10
Enclosure class
IP43 (electronics), IP22 (connection area)
Weight
0.6 kg
Dimensions (h × w × d)
100 × 113 × 50 mm
Safety
EN/IEC 62109-1 / UL 1741 / CSA C22.2 NO.107,1-16
Nominal voltage
12/24 V
Item number
SCC010015050R
Download datasheet (PDF)
Victron SmartSolar MPPT 75/10 – MPPT solar charge controller for efficient solar chargingThe Victron SmartSolar MPPT 75/10 is an MPPT solar charge controller from Victron Energy for 12V and 24V battery banks. It regulates solar panel performance, handles a PV open-circuit voltage of up to 75V, and built-in Bluetooth allows you to monitor operation and change settings directly from the VictronConnect app.Advantages
Built-in Bluetooth: Set up, monitor, and update firmware wirelessly in the VictronConnect app — no extra display required.
Up to 98% efficiency: MPPT tracking continuously adjusts the operating point so panels perform optimally under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12V or 24V.
Multiple charging algorithms and custom profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 75V PV open-circuit voltage: Provides the freedom to connect multiple panels in series and run longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be installed in technical rooms, boats, motorhomes, and site trailers.
Application
Motorhome, caravan, and van with roof-mounted solar panel.
Boats, where the service battery needs to be kept fully charged throughout the season.
Summer house, allotment garden, and site trailer without a fixed grid connection.
Specifications
Specification
Details
Battery voltage (automatic selection)
12V or 24V
Max. battery current
10 A
Rated solar power, 12V
145 W
Rated solar power, 24V
290 W
Max. PV short-circuit current
10 A
Automatic load disconnect
Yes
Max. PV open-circuit voltage
75 V
Max. efficiency
98 %
Self-consumption
12V: 20 mA / 24V: 10 mA
Absorption charge voltage
14.4 V / 28.8 V / 57.6 V (adjustable)
Float charge voltage
13.8 V / 27.6 V / 55.2 V (adjustable)
Equalization charge voltage
16.2 V / 32.4 V / 64.8 V (adjustable)
Charging algorithm
Multi-stage adaptive or custom algorithm
Temperature compensation
12V: -16 mV/°C / 24V: -32 mV/°C / 48V: -64 mV/°C
Continuous load current
15 A
Low voltage load disconnect
11.1 V / 22.2 V / 44.4 V or 11.8 V / 23.6 V / 47.2 V or BatteryLife algorithm
Low voltage load reconnect
13.1 V / 26.2 V / 52.4 V or 14 V / 28 V / 56 V or BatteryLife algorithm
Protection
PV reverse polarity, output short-circuit, overtemperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
100 %, non-condensing
Max. altitude
5000 m (full output up to 2000 m)
Environmental conditions
indoor, unheated (type 1)
Pollution degree
PD3
Data communication
VE.Direct port / Bluetooth, via VictronConnect app
Color
blue (RAL 5012)
Power terminals
6 mm² / AWG10
Protection class
IP43 (electronics), IP22 (connection area)
Weight
0.5 kg
Dimensions (h × w × d)
100 × 113 × 40 mm
Safety
EN/IEC 62109-1 / UL 1741 / CSA C22.2 NO.107.1-16
Nominal voltage
12/24 V
Item number
SCC075010060R
Download datasheet (PDF)
Victron 12V 110Ah Gel Deep Cycle battery – maintenance-free lead-acid batteryThe Victron 12V 110Ah Gel Deep Cycle battery is a maintenance-free lead-acid battery from Victron Energy with a capacity of 110 Ah and a nominal voltage of 12 V. It is built as a service battery for repeated charging and discharging and can be installed in enclosed spaces thanks to its very low gas emission.Advantages
Capacity 110 Ah: Solid capacity for daily use.
Nominal voltage 12 V: Standard voltage for motorhomes, boats, and solar power systems.
Maintenance-free: Sealed construction — no water refilling and no free acid.
Withstands deep discharge: Designed as a service battery for repeated charging and discharging.
Can be installed in enclosed spaces: Very low gas emission during normal charging.
Application
Service battery for motorhomes, caravans, and boats.
Backup and emergency power systems.
Solar power systems where high operational reliability is required.
Specifications
Specification
Details
Nominal voltage
12 V
Capacity (20-hour discharge)
110 Ah
Weight
33 kg
Technology
GEL
Dimensions (h × w × d)
220 × 171 × 330 mm
Item number
BAT412101104
Victron Phoenix Inverter Control – remote control panel for Phoenix invertersVictron Phoenix Inverter Control is a remote control panel for Victron Phoenix inverters that have a UTP socket for remote monitoring and control. With the panel, you can operate the inverter and follow its status via LEDs from a location other than where the inverter is mounted.Benefits
Remote operation: Control the inverter from a visible and convenient location, even if the inverter itself sits in a cabinet, engine room or plant room.
Status via LEDs: The LEDs show the inverter's status, and their brightness is dimmed automatically at night.
Can also be used with MultiPlus: The panel can be used on a MultiPlus if you only want the inverter and automatic transfer switch – without the charger function.
Applications
Boats, motorhomes and buses where the Phoenix inverter is mounted out of reach.
Fixed installations where the inverter needs to be operated from a central control panel.
Specifications
Specification
Details
Type
Remote control panel
Connection
UTP socket for remote control on the inverter
Compatible inverters
Phoenix 12/1200, 12/1600, 12/2000, 12/3000, 12/5000, 24/1200, 24/1600, 24/2000, 24/3000, 24/5000, 48/3000 and 48/5000
Not for
Phoenix inverters with VE.Direct – for these, use the Phoenix Inverter Control VE.Direct
Item number
REC030001210
See the product page at Victron Energy
Victron SmartSolar Pluggable display – original Victron accessoryThe Victron SmartSolar Pluggable display is an original accessory from Victron Energy. It fits directly into the Victron system and is built to withstand demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits directly into the Victron system without any modifications.
Reliable quality: Materials and workmanship built to last in marine and vehicle environments.
Applications
Original accessory that fits directly into the Victron system.
Motorhomes, boats, summer cottages, and off-grid systems.
Safe and stable installation.
Specifications
Specification
Details
Part number
victron-smartsolar-pluggable-display-c160b6
Victron Orion-Tr non-isolated converter 12V/12V/30A – DC-DC charger for charging while drivingThe Victron Orion-Tr non-isolated converter 12V/12V/30A is a DC-DC charger from Victron Energy that charges the auxiliary battery from the vehicle's alternator while driving. It also works in vehicles with smart alternators, where the voltage varies.Advantages
Works with smart alternator: Also charges in vehicles with Euro 6 engines, where the alternator voltage varies.Application
Charging the auxiliary battery from the alternator while driving.
Camper vans and commercial vehicles with Euro 6 engines and smart alternators.
Boats with separate starter and auxiliary batteries.
Specifications
Specification
Details
Item number
victron-orion-tr-smart-12-12-30a-6e8c43
Victron VE.Bus Smart Dongle – original Victron accessoryThe Victron VE.Bus Smart Dongle is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits directly into the Victron system without modification.
Reliable quality: Materials and workmanship that endure in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Camper van, boat, holiday home, and off-grid systems.
Safe and reliable installation.
Specifications
Specification
Details
Operating input voltage range (Vbat)
8 – 70Vdc
Current draw (@12V) - BLE not connected to VictronConnect, VE.Bus connected
Not joining a VE.Smart network <6 mA / Joining a VE.Smart network <9 mA
Current draw (@12V) BLE connected to VictronConnect, VE.Bus connected
Not joining a VE.Smart network <7 mA / Joining a VE.Smart network <9 mA
Operating temperature
-20 to +50 °C / 0 to 120°F
Humidity
max. 95% (non-condensing)
Protection grade
IP20
Material and color
ABS, matte black
VE.Bus Smart Dongle
Specifications
Item number
victron-vebus-smart-dongle-6d47a8
Victron Smart BMS 12/200 – Battery Management System for lithium batteriesThe Victron Smart BMS 12/200 is a battery management system (BMS) from Victron Energy for Li FePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
Protects the cells: Disconnects charging and consumption in the event of cell overvoltage or undervoltage.
Manages the entire system: Sends a signal to the inverter, charger, and MPPT so they react before the battery is damaged.
For Victron LiFePO4: Designed for Victron Smart Lithium batteries and their cell balancing.
Bluetooth built-in: View cell voltages and status in the VictronConnect app.
Applications
Protection of Victron LiFePO4 batteries against overvoltage and undervoltage.
Lithium systems with inverter, charger, and MPPT from Victron.
Safe operation of lithium banks in boats and motorhomes.
Specifications
Specification
Details
System+ port - max. charge and discharge current
200 A
Peak discharge current
400 A
Input voltage
>13 V
Current consumption, remote on
17.5 mA (excluding consumption output and charge output current)
Current consumption, remote off
6.5 mA (BMS functionality still active) / 4.5 mA (BMS functionality disabled)
Consumption disconnect output
Normally high (Vbat – 0.1 V) / Source current limit: 10 mA (short-circuit protected) / Sink current: 0 A (output free floating)
Charge disconnect output
Normally high (Vbat – 0.1 V) / Source current limit: 10 mA (short-circuit protected) / Sink current: 0 A (output free floating)
Pre-alarm output
Normally low / High (Vbat) in case of alarm, max. 1 A / (not short-circuit proof)
Remote (or System) on/off: Remote L and Remote H
Use modes: / ON when L and H terminals are interconnected / ON when L terminal is pulled to battery minus (V < 5 V) / ON when H terminal is high (V > 3 V) / OFF in all other conditions
Operating temperature range
-40 °C to +60 °C
Humidity
100 % / 95 %
Protection, electronics
IP65
DC power connection
M8
Mounting
10Nm
DC connector battery minus
Faston female, 6.3 mm
Weight
2 kg
Dimensions (h × w × d)
65 × 120 × 340 mm
Emission
EN 61000-6-3, EN 55014-1
Immunity
EN 61000-6-2, EN 61000-6-1, EN 55014-2
Automotive directive
ECE R10-5
Alternator port - max. charge current
100 A (with a 125 A fuse)
Item number
victron-smart-bms-12-200-c1fed2
Download datasheet (PDF)
Victron Lynx Shunt VE.Can (M8) – battery monitor with precise consumption measurementThe Victron Lynx Shunt VE.Can (M8) is a battery monitor from Victron Energy that measures the actual current flowing in and out of the battery bank. You get the state of charge in percent, consumption, and estimated time remaining — far more accurate than a simple voltage meter.Advantages
Precise state of charge in percent: Measures the actual current flowing in and out of the battery — not just the voltage.
Time remaining and consumption: Shows how much power is left at the current consumption rate.
History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting.
Applications
Precise display of battery state of charge in motorhomes and boats.
Monitoring of consumption and remaining capacity in solar power systems.
Troubleshooting and documentation of battery health over time.
Specifications
Specification
Details
Supported system voltages
12, 24 or 48V
Reverse polarity protection
No
Current rating
1000 Adc continuous
Power consumption
60 mA @ 12V / 33 mA @ 24V / 20 mA @ 48V
Potential free alarm contact
3 A, 30 Vdc, 250 Vac
Supply voltage range
9 - 70 Vdc
Busbar
M8
Fuse
M8 (a Mega fuse can be installed on M6 bolts)
VE.Can
RJ45 and RJ45 terminator
Power supply connection to Lynx Distributor
RJ10 (a RJ10 cable ships with each Lynx Distributor)
Temperature sensor
terminal connector (Sensor included)
Relay
screw terminal
Enclosure material
ABS
Enclosure dimensions (hxwxd)
190 × 180 × 80 mm
Unit weight
1.4 kg
Busbar material
Tinned copper
Busbar dimensions (hxw)
8 × 30 mm
Operating temperature range
-40 °C to +60 °C
Storage temperature
-40 °C to +60 °C
Humidity
max. 95 % (non-condensing)
Protection class
IP22
Item number
victron-lynx-shunt-ve-can-d8d665
Vic tron SmartShunt 2000A/50 mV IP65 Bluetooth monitor – battery monitoring with precise consumption measurementThe Victron SmartShunt 2000A/50 mV IP65 Bluetooth monitor is a battery monitor from Victron Energy that measures the actual current flowing into and out of the battery bank. You get the state of charge in percentage, consumption, and expected time remaining — far more accurate than a simple voltage meter, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Benefits
Precise state of charge in percentage: Measures the actual current into and out of the battery — not just the voltage.
Time remaining and consumption: Shows how much power is left at the current consumption rate.
Bluetooth built-in: All data directly on your phone in the VictronConnect app.
VE.Direct port: Can be connected to a GX device, so battery data is included on the VRM Portal.
History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting.
Applications
Precise display of the battery's state of charge in motorhomes and boats.
Monitoring of consumption and remaining capacity in solar power systems.
Troubleshooting and documentation of the battery's condition over time.
Specifications
Specification
Details
Supply voltage range
6.5 - 70 Vdc
Current draw
< 1 mA
Input voltage range
6.5 - 70 Vdc
Battery capacity (Ah)
1 - 9999 Ah
Operating temperature range
-40 +50 °C (-40 - 120°F)
Auxiliary input
Measures voltage of second battery, temperature* or midpoint
Temperature measurement range
-20 +50 °C
VE.Direct port
Yes
Current
± 0.01 A
Voltage
± 0.01 V
Amp hours
± 0.1 Ah
State of charge (0 - 100%)
± 0.1 %
Time-to-go
± 1 min.
Temperature range
± 1 °C/°F
Accuracy current measurement
± 0.4 %
Offset
Less than 10 / 10 / 20 / 40 mA
Accuracy voltage measurement
± 0.3 %
Dimensions (h × w × d)
300 A: 44 × 120 × 38 mm / 500 A: 46 × 120 × 54 mm / 1000 A: 68 × 168 × 75 mm / 2000 A: 68 × 168 × 100 mm
Shunt connection bolts
300 A: M8 / 500 A, 1000 A, 2000 A: M10 (0.3937 inch)
Protection class
IP65 (encapsulated)
Safety
EN 60335-1, IEC 61010-1
Emission / immunity
EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
EN 50498
Vbatt cable
1.5 m red cable, with 1 A slow blow fuse and M10 eye terminals
Aux cable
1.5 m red cable, with 1 A slow blow fuse and M10 eye terminals
Temperature sensor
optional (ASS000100000)
SmartShunt IP
300 A / 500 A / 1000 A / 2000 A
Item number
victron-smartshunt-2000a-ip65-c1fbab
Victron SmartShunt 500A/50 mV IP65 Bluetooth monitor – battery monitor with precise consumption measurementThe Victron SmartShunt 500A/50 mV IP65 Bluetooth monitor is a battery monitor from Victron Energy that measures the actual current into and out of the battery bank. You get state of charge in percent, consumption, and expected remaining time — far more accurate than a simple voltage meter, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
Precise state of charge in percent: Measures the actual current into and out of the battery — not just the voltage.
Remaining time and consumption: Shows how much power is left at current consumption levels.
Built-in Bluetooth: All data directly on your phone in the VictronConnect app.
History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting.
Application
Precise display of battery state of charge in motorhomes and boats.
Monitoring of consumption and remaining capacity in solar energy systems.
Troubleshooting and documentation of battery health over time.
Specifications
Specification
Details
Item number
victron-smartshunt-500a-ip65-c1faa3
Victron SmartShunt 1000A/50 mV IP65 Bluetooth Monitor – battery monitor with precise consumption measurementThe Victron SmartShunt 1000A/50 mV IP65 Bluetooth monitor is a battery monitor from Victron Energy that measures the actual current into and out of the battery bank. You get state of charge in percentage, consumption, and expected time remaining — far more accurate than a simple voltage meter, and built-in Bluetooth makes it possible to track operation and change settings directly from the VictronConnect app.Advantages
Precise state of charge in percentage: Measures the actual current into and out of the battery — not just the voltage.
Time remaining and consumption: Shows how much power is left at the current rate of consumption.
Bluetooth built-in: All data directly on your phone in the VictronConnect app.
VE.Direct port: Can be connected to a GX device, so battery data is included on the VRM Portal.
History: Saves data on deepest discharge, cycles, and voltage levels for troubleshooting.
Application
Precise display of the battery's state of charge in motorhomes and boats.
Monitoring of consumption and remaining capacity in solar power systems.
Troubleshooting and documentation of the battery's condition over time.
Specifications
Specification
Details
Supply voltage range
6.5 - 70 Vdc
Current draw
< 1 mA
Input voltage range
6.5 - 70 Vdc
Battery capacity (Ah)
1 - 9999 Ah
Operating temperature range
-40 +50 °C (-40 - 120°F)
Auxiliary input
Measures voltage of second battery, temperature* or midpoint
Temperature measurement range
-20 +50 °C
VE.Direct port
Yes
Current
± 0.01 A
Voltage
± 0.01 V
Amp hours
± 0.1 Ah
State of charge (0 - 100%)
± 0.1 %
Time-to-go
± 1 min.
Temperature range
± 1 °C/°F
Accuracy current measurement
± 0.4 %
Offset
Less than 10 / 10 / 20 / 40 mA
Accuracy voltage measurement
± 0.3 %
Dimensions (h × w × d)
300 A: 44 × 120 × 38 mm / 500 A: 46 × 120 × 54 mm / 1000 A: 68 × 168 × 75 mm / 2000 A: 68 × 168 × 100 mm
Shunt connection bolts
300 A: M8 / 500 A, 1000 A, 2000 A: M10 (0.3937 inch)
Protection class
IP65 (encapsulated)
Safety
EN 60335-1, IEC 61010-1
Emission / immunity
EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3
Automotive directive
EN 50498
Vbatt cable
1.5 m red cable, with 1 A slow blow fuse and M10 eye terminals
Aux cable
1.5 m red cable, with 1 A slow blow fuse and M10 eye terminals
Temperature sensor
optional accessory (ASS000100000)
SmartShunt IP
300 A / 500 A / 1000 A / 2000 A
Item number
victron-smartshunt-1000a-ip65-c1fa1e
Victron VE.Direct Bluetooth Smart Dongle – original Victron accessoryThe Victron VE.Direct Bluetooth Smart Dongle is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Benefits
Original Victron accessory: Fits the Victron system directly without any modifications.
Reliable quality: Materials and workmanship that endure in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Motorhome, boat, summer cottage, and off-grid installations.
Safe and reliable installation.
Specifications
Specification
Details
Current draw when not connected via Bluetooth
1 mA
Current draw when connected via Bluetooth
2.5 mA
VE.Direct cable length
1.5 m
Specification
Value
Item number
victron-ve-direct-bluetooth-dongle-c1f661
Victron SmartSolar MPPT RS 450/100-Tr – MPPT solar charge controller for efficient solar chargingThe Victron SmartSolar MPPT RS 450/100-Tr is an MPPT solar charge controller from Victron Energy for high-voltage battery banks. It delivers up to 100 A of charging current, and built-in Bluetooth allows you to monitor operation and change settings directly from the VictronConnect app.Advantages
Up to 100 A charging current: Charges the battery bank quickly and gently.
Built-in Bluetooth: Setup, monitoring, and firmware updates are done wirelessly in the VictronConnect app — no extra display required.
Enclosed electronics (IP21): Can be mounted in utility rooms, boats, motorhomes, and site huts.
Applications
Motorhomes, caravans, and vans with solar panels on the roof.
Boats where the service battery needs to be kept fully charged throughout the season.
Holiday homes, allotments, and site huts without a fixed grid connection.
Specifications
Specification
Details
Programmable charging voltage range
Minimum: 36V / Maximum: 60 V (8)
Absorption charging voltage
Default : 57.6 V (adjustable)
Float charging voltage
Default : 55.2 V (adjustable)
Max. charging current
100 A
Battery temperature sensor
included
Battery voltage measurement
Yes
Max. DC PV voltage
450 V
Start-up voltage
120 V
MPPT operating voltage range
65 – 450 V (1)
Number of MPP Trackers
2
Max. operational PV input current
16 A per tracker
Max. PV short circuit current reverse polarity protection
20 A per tracker
Max. DC output charging power
4000 W per tracker / 5760 W total
Max. PV array size per tracker
7200 Wp (450 V × 20 A)
PV Isolation fail level
100 kΩ
Synchronised Parallel Operation
Yes, up to 25 units with VE.Can
Programmable relay
Yes
Protection
c, d, e
Data Communications
VE.Direct port, VE.Can port & SmartSolar Bluetooth (7)
Bluetooth frequency
2402 – 2480 MHz
Bluetooth power
4dBm
General purpose analog/digital in port
Yes, 2x
Remote on/off
Yes
Operating temperature range
-40 to +60 °C (fan cooled)
Humidity (non-condensing)
max. 95 %
Ambient conditions
indoor type 1, conditioned
Suitable for wet locations
No
Pollution degree
PD2
Max. altitude above sea level
2000 m
Overvoltage category
OVCII
Material
steel, blue RAL 5012
Enclosure class
IP21
Battery connection
Two M8 bolts, 1x Positive and 1x Negative
Power terminals PV input
MC4 Connectors
Weight
7.9 kg
Dimensions (h × w × d)
442 × 310 × 127 mm
Safety
EN-IEC 62109-1
Country of Origin
Designed in Netherlands, Made in India
Item number
victron-smartsolar-mppt-rs-450-100-tr-0509a3
Download datasheet (PDF)
Victron SmartSolar MPPT 250/85-Tr VE.Can – MPPT solar charge controller for efficient solar chargingThe Victron SmartSolar MPPT 250/85-Tr VE.Can is an MPPT solar charge controller from Victron Energy for 12/24/48V automatic selection, 36V: manual select battery banks. It regulates the performance of solar panels, handles a PV open circuit voltage of up to 250 V absolute maximum coldest conditions / 245 V start-up and operating maximum, and built-in Bluetooth allows you to monitor operation and change settings directly from the VictronConnect app.Advantages
Built-in Bluetooth: Setup, monitoring, and firmware updates are done wirelessly in the VictronConnect app — without an additional display.
Up to 99% efficiency: The MPPT tracking continuously adjusts the operating point so that the panels perform optimally under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12/24/48V automatic selection, 36V: manual select.
Multiple charging algorithms and custom profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 250 V absolute maximum coldest conditions / 245 V start-up and operating maximum PV open circuit voltage: Provides the freedom to connect multiple panels in series and run longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be mounted in technical rooms, boats, motorhomes, and caravans.
Application
Motorhome, caravan, and van with solar panels on the roof.
Boat where the service battery needs to be kept fully charged throughout the season.
Summer house, allotment garden, and mobile home without a fixed mains connection.
Specifications
Specification
Details
Battery voltage
12/24/48V automatic selection, 36V: manual select
Max. battery current
85 A
Nominal PV power, 12V
1200 W
Nominal PV power, 24V
2400 W
Nominal PV power, 36V
3600 W
Nominal PV power, 48V
4900 W
Max. PV short-circuit current
70 A
Max. PV open circuit voltage
250 V absolute maximum coldest conditions / 245 V start-up and operating maximum
Max. efficiency
99 %
Self-consumption
12V: less than 35 mA / 48V: less than 20 mA
Charge voltage absorption
Default setting: 14.4 V / 28.8 V / 57.6 V (adjustable)
Charge voltage float
Default setting: 13.8 V / 27.6 V / 55.2 V (adjustable)
Charge voltage equalization
Default setting: 16.2 V / 32.4 V / 64.8 V (adjustable)
Charge algorithm
Multi-stage adaptive (eight pre-programmed algorithms) or custom algorithm
Temperature compensation
-16 mV/°C / -32 mV/°C / -48 mV/°C / -64 mV/°C
Protection
PV reverse polarity / output short circuit / overtemperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
95 %, non-condensing
Max. altitude
5000 m (full output up to 2000 m)
Environmental conditions
indoor, unheated
Pollution degree
PD3
Data communication
VE.Can ports 5 / VE.Direct port 5 / Bluetooth, via VictronConnect app
Remote on/off
Yes, 2-pole terminal
Programmable relay
DPST AC rating: 4 A up to 240Vac / DC rating: 4 A up to 35Vdc, 1 A up to 60Vdc
Parallel operation
Yes, parallel synchronized operation via VE.Can (max. 25 units) or via Bluetooth (max. 10 units).
Colour
blue (RAL 5012)
PV terminals
Tr models: 35 mm² / AWG2 / MC4 models: 3 pairs of MC4 connectors 3,6
Battery terminals
35 mm² / AWG2
Protection class
IP43 (electronics), IP22 (connection area)
Weight
4.5 kg
Dimensions (h × w × d)
Tr models: 216 × 295 × 103 mm / MC4 models: 246 × 295 × 103 mm
Safety
EN/IEC 62109-1, UL 1741, CSA C22.2
Model
Part number
SmartSolar 150/85-Tr VE.Can
SCC115085412
SmartSolar 150/85-MC4 VE.Can
SCC115085512
SmartSolar 150/100-Tr VE.Can
SCC115110412
SmartSolar 150/100-MC4 VE.Can
SCC115110512
Nominal voltage
12/24/48 V
Part number
SCC125085411
Download datasheet (PDF)
Victron SmartSolar MPPT 250/100-Tr VE.Can – MPPT solar charge controller for efficient solar chargingThe Victron SmartSolar MPPT 250/100-Tr VE.Can is an MPPT solar charge controller from Victron Energy for 12/24/48V automatic selection, 36V: manual selection battery banks. It regulates the output of the solar panels, handles a PV open-circuit voltage of up to 250 V absolute maximum coldest conditions / 245 V start-up and operating maximum, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
Built-in Bluetooth: Setup, monitoring, and firmware updates take place wirelessly in the VictronConnect app — without an extra display.
Up to 99% efficiency: The MPPT tracking continuously adjusts the operating point so that the panels perform optimally under changing light conditions.
Automatic voltage selection: The controller automatically detects whether the battery bank is 12/24/48V automatic selection, 36V: manual selection.
Multiple charging algorithms and custom profile: Adjustable absorption and float voltages to suit lead-acid, AGM, gel, and lithium batteries.
Up to 250 V absolute maximum coldest conditions / 245 V start-up and operating maximum PV open-circuit voltage: Provides the freedom to connect more panels in series and run longer cables.
Encapsulated electronics (IP43 (electronics), IP22 (connection area)): Can be mounted in technical rooms, boats, motorhomes, and site huts.
Application
Motorhome, caravan, and van with a solar panel on the roof.
Boat, where the service battery needs to be kept fully charged throughout the season.
Summer house, allotment garden, and site hut without a fixed grid connection.
Specifications
Specification
Details
Battery voltage
12/24/48V automatic selection, 36V: manual selection
Max. battery current
100 A
Nominal solar power, 12V
1450 W
Nominal solar power, 24V
2900 W
Nominal solar power, 36V
4350 W
Nominal solar power, 48V
5800 W
Max. PV short-circuit current
70 A
Max. PV open-circuit voltage
250 V absolute maximum coldest conditions / 245 V start-up and operating maximum
Max. efficiency
99 %
Self-consumption
12V: less than 35 mA / 48V: less than 20 mA
Charging voltage absorption
Default setting: 14.4 V / 28.8 V / 57.6 V (adjustable)
Charging voltage float
Default setting: 13.8 V / 27.6 V / 55.2 V (adjustable)
Charging voltage equalization
Default setting: 16.2 V / 32.4 V / 64.8 V (adjustable)
Charging algorithm
Multi-stage adaptive (eight pre-programmed algorithms) or custom algorithm
Temperature compensation
-16 mV/°C / -32 mV/°C / -48 mV/°C / -64 mV/°C
Protection
PV reverse polarity / output short circuit / overtemperature
Operating temperature
-30 °C to +60 °C (full output up to 40 °C)
Humidity
95 %, non-condensing
Max. altitude
5000 m (full output up to 2000 m)
Environmental conditions
indoor, unheated
Pollution degree
PD3
Data communication
VE.Can ports 5 / VE.Direct port 5 / Bluetooth, via VictronConnect app
Remote on/off
Yes, 2-pole terminals
Programmable relay
DPST AC rating: 4 A up to 240Vac / DC rating: 4 A up to 35Vdc, 1 A up to 60Vdc
Parallel operation
Yes, parallel synchronized operation via VE.Can (max. 25 units) or via Bluetooth, (max. 10 units).
Colour
blue (RAL 5012)
PV terminals
Tr models: 35 mm² / AWG2 / MC4 models: 3 pairs of MC4 connectors 3,6
Battery terminals
35 mm² / AWG2
Enclosure class
IP43 (electronics), IP22 (connection area)
Weight
4.5 kg
Dimensions (h × w × d)
Tr models: 216 × 295 × 103 mm / MC4 models: 246 × 295 × 103 mm
Safety
EN/IEC 62109-1, UL 1741, CSA C22.2
Model
Part number
SmartSolar 150/85-Tr VE.Can
SCC115085412
SmartSolar 150/85-MC4 VE.Can
SCC115085512
SmartSolar 150/100-Tr VE.Can
SCC115110412
SmartSolar 150/100-MC4 VE.Can
SCC115110512
Nominal voltage
12/24/48 V
Item number
SCC125110412
Download datasheet (PDF)
Victron Phoenix Inverter 48V/1200W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 48V/1200W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run without problems.
Low standby consumption (12 W): Can be left on without unnecessary battery drain.
Input voltage 36.8 - 62 V: Operates stably across the entire battery voltage range.
Application
230V power for refrigerators, coffee makers, and power tools in campers and vans.
Boats, where mains power is needed without shore connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Item number
PINx × 2121X10
Continuous power at 25 °C
1150 W
Continuous power at 40 °C
1000 W
Time-limited power (cold start)
1200 W/1h
Peak power
1600 W/15s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
36.8 - 62 V
Low battery voltage disconnection
37.2 V
Dynamic low voltage disconnection (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
43.6 V
Charged battery detection
56 V
Max. efficiency
92 %
Zero-load consumption
12 W
ECO mode power limit
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue RAL 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
25 mm²
AC outlets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
7.2 kg
Dimensions (h × w × d)
117 × 231 × 333
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Item number
victron-phoenix-inverter-48v-1200w-c91523
Victron Phoenix Inverter 24V/1200W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 24V/1200W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same power quality as the mains, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the mains, so sensitive electronics, motors, and pumps run without issues.
Low no-load consumption (11 W): Can be left on without unnecessarily draining the battery.
Input voltage 18.4 - 34 V: Operates stably across the entire battery voltage range.
Application
230V power for refrigerators, coffee machines, and power tools in motorhomes and vans.
Boats where mains power is needed without shore connection.
Emergency power in holiday homes and off-grid installations.
Specifications
Specification
Details
Part number
PINx × 2121X10
Continuous power at 25 °C
1150 W
Continuous power at 40 °C
1000 W
Time-limited power (cold start)
1200 W/1h
Peak power
1600 W/15s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
18.4 - 34 V
Low battery voltage disconnect
18.6 V
Dynamic low voltage disconnect (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
21.8 V
Charged battery detection
28 V
Max. efficiency
91 %
Zero-load consumption
11 W
Power threshold for ECO mode
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Power derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue RAL 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
25 mm²
AC output sockets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
7.2 kg
Dimensions (h × w × d)
117 × 231 × 333
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Part number
victron-phoenix-inverter-24v-1200w-604bd7
Victron Phoenix Inverter 12V/1200W/230V – pure sine wave inverter for 230V mains powerThe Victron Phoenix Inverter 12V/1200W/230V is a pure sine wave inverter from Victron Energy that converts the battery's DC power into 230V AC power. It provides stable 230V power with the same quality as the utility grid, ensuring that sensitive electronics, motors, and pumps run smoothly.Advantages
Pure sine wave: Provides the same power quality as the utility grid, so sensitive electronics, motors, and pumps run without issues.
Low idle consumption (11 W): Can remain switched on without draining the battery unnecessarily.
Input voltage 9.2 - 17 V: Works stably throughout the battery's entire voltage range.
Applications
230V power for refrigerators, coffee machines, and power tools in camper vans and delivery vans.
Boats, where mains power is needed without shore power connection.
Emergency power in summer houses and off-grid installations.
Specifications
Specification
Details
Item number
PINx × 2121X10
Continuous power at 25 °C
1150 W
Continuous power at 40 °C
1000 W
Peak power (cold start)
1200 W/1h
Surge power
1600 W/15s
AC output voltage
230 V +/- 3 %
AC output frequency
50 or 60 Hz +/- 0.1 %
DC input voltage range
9.2 - 17 V
Low battery voltage disconnect
9.3 V
Dynamic low voltage disconnect (load-dependent)
Yes, see Dynamic cut off chapter.
Low battery voltage restart and alarm
10.9 V
Charged battery detection
14.0 V
Max. efficiency
91 %
Zero-load consumption
11 W
ECO mode power limit
adjustable
Protection
a – g
Operating temperature range
-40 to +65 °C (fan-assisted cooling)
Derating
1.25 % per °C above 40 °C
Humidity (non-condensing)
max. 95 %
Material and color
steel chassis and plastic cover (blue RAL 5012)
Battery connection terminals
screw terminals
Max. battery cable cross-section
35 mm²
AC sockets
SCHUKO model: CEE 7/4 / IEC model: IEC-320 (male plug included) / UK model: BS 1363 / AU/NZ model: AS/NZS 3112
Protection class
IP 21
Weight
7.2 kg
Dimensions (h × w × d)
117 × 231 × 374
Remote on/off
Yes
Automatic AC transfer switch
Not built-in. Add a Filax 2 transfer switch, or use an inverter/charger instead.
Safety
EN/IEC 60335-1, EN/IEC 62109-1
EMC
EN 55014-1, EN 55014-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive directive
ECE R10-4 pending
Item number
victron-phoenix-inverter-12v-1200w-220v-febc9f
Victron Lithium LiFePO4 12V 50Ah Smart – LiFePO4 battery with BluetoothThe Victron Lithium LiFePO4 12V 50Ah Smart (12.8 V/50 Ah) is a lithium iron phosphate battery from Victron Energy with built-in cell balancing and Bluetooth. It holds 640 Wh, weighs only 7 kg and handles up to 2500 cycles at 80 % discharge. The battery must always be connected to a Victron BMS, which protects it against overvoltage and undervoltage.Benefits
Low weight: 640 Wh in a battery weighing only 7 kg.
Long lifespan: Up to 2500 cycles at 80 % discharge and 5000 cycles at 50 % discharge.
Bluetooth: Monitor cell voltages, temperature and alarm status in the VictronConnect app.
Built-in cell balancing: Keeps the battery cells balanced automatically.
Can be connected in series and parallel: Build 12 V, 24 V or 48 V battery banks with up to 20 batteries per system.
Applications
Leisure battery in motorhomes, caravans and boats, where weight and space matter a lot.
Smaller solar and off-grid systems.
Systems where a lead-acid battery is to be replaced with lithium (requires a Victron BMS and a charger with a lithium profile).
Specifications
Specification
Details
Battery chemistry
Lithium iron phosphate (LiFePO4)
Nominal voltage
12.8 V
Nominal capacity
50 Ah at 25 °C (40 Ah at 0 °C / 25 Ah at -20 °C)
Nominal energy
640 Wh at 25 °C
Cycles (≥ 80 % remaining capacity)
2500 at 80 % DoD / 3000 at 70 % DoD / 5000 at 50 % DoD
Max. continuous discharge current
100 A (recommended ≤ 50 A)
Max. charging current
100 A (recommended ≤ 30 A)
Charging voltage
14.0–14.4 V (recommended 14.2 V)
Float voltage
13.5 V
BMS
Requires an external Victron BMS, e.g. smallBMS, VE.Bus BMS, Smart BMS or Lynx Smart BMS (max. 20 batteries per BMS)
Series/parallel
Yes – 12 V, 24 V or 48 V, up to 20 batteries per system
Bluetooth
Yes – cell voltages, temperature and alarm status in VictronConnect
Operating temperature, discharging
-20 to +50 °C
Operating temperature, charging
+5 to +50 °C
Storage temperature
-45 to +70 °C
Power connection
M8 threaded inserts
BMS connection
Male and female cable with M8 circular connector, 50 cm
Enclosure rating
IP22
Weight
7 kg
Dimensions (h × w × d)
199 × 188 × 147 mm
Item number
BAT512050610
Download datasheet (PDF)
Victron EasySolar 48V/3000VA/35-50 MPPT – inverter and battery charger in one unitThe Victron EasySolar 48V/3000VA/35-50 MPPT is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore power connection with battery power and prevents the site fuse from blowing.
Pure sine wave: The same power quality as the grid — even for sensitive electronics.
Application
Motorhomes and boats where both shore power and battery operation must be managed automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
Item number
victron-easysolar-48v-3000va-35-50-mppt-e0cf1f
Victron EasySolar 48V/5000VA/70-100 MPPT – inverter and battery charger in one unitThe Victron EasySolar 48V/5000VA/70-100 MPPT is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and switches automatically between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power, preventing the site's fuse from blowing.
Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics.
Application
Motorhomes and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage in residential and commercial settings.
Specifications
Specification
Details
Item number
victron-easysolar-48v-5000va-70-100-mppt-a23ec0
Victron Buck-Boost 50A DC/DC converter – DC-DC converter for charging while drivingThe Victron Buck-Boost 50A DC/DC converter is a DC-DC converter from Victron Energy that charges the service battery from the vehicle's alternator while driving. It also works in vehicles with a smart alternator, where the voltage varies.Advantages
Works with smart alternator: Also charges in vehicles with Euro 6 engines, where the alternator voltage varies.Application
Charging the service battery from the alternator while driving.
Camper vans and commercial vehicles with Euro 6 engines and smart alternators.
Boats with separate starter and service batteries.
Specifications
Specification
Details
Part number
victron-buck-boost-dc-dc-50a-56ab9f
Victron Orion-Tr converter 48V/48V/6A – DC-DC charger for charging while drivingThe Victron Orion-Tr 48V/48V/6A converter is a DC-DC charger from Victron Energy that charges the service battery from the vehicle's alternator while driving. It also works in vehicles with smart alternators, where the voltage varies.Advantages
Works with smart alternators: Also charges in vehicles with Euro 6 engines, where the alternator voltage varies.Application
Charging a service battery from the alternator while driving.
Motorhomes and vans with Euro 6 engines and smart alternators.
Boats with separate starter and service batteries.
Specifications
Specification
Details
Item number
victron-orion-tr-48v-48v-6a-461b06
Victron Phoenix Smart Charger IP43 12V 50A – With 120/240V AC InputThe Victron Phoenix Smart Charger IP43 12V 50A is an intelligent battery charger from Victron Energy featuring adaptive multi-stage charging. It adjusts the charging voltage to the battery type, ensuring the battery is charged quickly and lasts longer, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.Advantages
Adaptive multi-stage charging: Adjusts the charging voltage to the battery type, extending its lifespan.
Can remain connected: Automatically switches to maintenance mode and can remain connected all winter.
Built-in Bluetooth: Monitor charging and change battery profiles in the VictronConnect app.
Enclosure rating electronics: IP43 | connection area: IP22: Withstands demanding environments in engine compartments and technical cabinets.
Application
Winter charging and maintenance of batteries in boats and motorhomes.
Workshops and garages where batteries need to be charged quickly and gently.
Fixed installations where the battery bank is charged from shore power.
Specifications
Specification
Details
Nominal input voltage - AC supply
120 – 240VAC
Input voltage range
85 – 250VAC (full power from 100VAC, startup from 90VAC)
Input frequency - AC supply
45 - 65 Hz
Input voltage
90 - 375 VDC
Power factor
>0.99
Max. efficiency
94 / 92 %
Charge voltages - Normal mode
14.4 V
Float
27.6 V
Storage
26.4 V
Charge voltages - high mode
14.7 V
Charge voltages - Lithium mode
14.2 V
Temperature compensation
-32 mV/°C
Charge algorithm
6-stage adaptive (3-stage for Li-ion)
Max. output current - Normal mode
50 A
Max. output current - low current mode
25 A
Max. output current - Starter battery
4 A (1+1 output models only)
Back drain current
<1 mA
Max. battery capacity
500 Ah
Min. battery capacity - Normal mode
Lead: 200 Ah
Min. battery capacity - low current mode
Lead: 100 Ah
Data communication
VE.Direct and Bluetooth (via VictronConnect app)
Bluetooth power and frequency
-4dBm | 2402 - 2480MHz
Remote on/off
Yes (2-pole terminal)
Programmable relay
Yes (SPDT - 5 A up to 250VAC / 5 A up to 28VDC)
Operating temperature
-20 to +60 °C (0 - 140°F) full output up to 40 °C
Max. humidity
95 %
Material and color
aluminum | blue RAL 5012
AC connection
IEC 320 C14 inlet with retainer clip (AC cord ordered separately)
Battery connection
screw terminals 16 mm² (AWG6)
Number of battery connections
(1+1) models: 2 (2nd output via 2-pole terminal) | (3) models: 3
Protection class
electronics: IP43 | connection area: IP22
Weight
2.7 kg (6.0 lbs)
Dimensions (h × w × d)
180 × 249 × 116 mm (7.1 × 9.8 × 4.6 inches)
Safety
EN 60335-1, EN 60335 -2-29
Emission
EN 55014-1, EN 61000-6-3, EN 61000-3-2
Immunity
EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
Part number
victron-phoenix-smart-lader-ip43-12v-50a-83f814
Download datasheet (PDF)
Victron MultiPlus-II 48V/3000W/32-35A – inverter and battery charger in one unitThe Victron MultiPlus-II 48V/3000W/32-35A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It delivers 3000 VA pure sine wave 230V, and automatically switches between shore power and battery operation.Advantages
3000 VA output power: Peak power of 5500 W for motor starting and short-term loads.
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the site fuse from tripping.
Pure sine wave: The same power quality as the mains — even for sensitive electronics.
Application
Motorhomes and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
PowerControl / PowerAssist
Yes
AC input
Input voltage range: 187 - 265VAC / input frequency: 45 - 65 Hz
Max. feed through current
32 A
Input voltage range
38 - 66 V
Output in inverter mode
Output voltage: 230 VAC ± 2 % / Frequency: 50 Hz ± 0.1 %
Continuous output power at 25 °C
3000 VA
Continuous output power at 40 °C
2200 W
Continuous output power at 65 °C
1700 W
Max. feed-in power
3000 VA
Peak power
5500 W
Max. efficiency
95 %
Zero-load consumption
11 W
Charge voltage absorption
14.4 / 28.8 / 57.6 V
Charge voltage float
13.8 / 27.6 / 55.2 V
Storage mode
13.2 / 26.4 / 52.8 V
Charging current house battery
35 A
Auxiliary output
Yes (50 A) Default setting: switches off when in inverter mode
External AC current sensor (optional)
100 A
Programmable relay
Yes
Protection
a - g
VE.Bus communication port
for parallel and three-phase operation, remote monitoring and system integration
General purpose com. port
Yes, 2x
Common Characteristics
Maximum altitude: 2000 m
Material and color
Pollution degree 2, OVC3
Battery connections
M8 bolts
AC connections
Screw terminals 13 mm² (6 AWG)
Weight
19 kg
Dimensions (h × w × d)
499 × 268 × 141 mm
Safety
EN 60335-1, EN 60335-2-29, IEC62109-1, IEC62109-2
Emission / immunity
EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, / IEC 61000-6-1, EN 61000-6-2, EN 61000-6-3
Uninterruptible power supply (UPS)
Please consult certificates on our website.
Anti-islanding
Please consult certificates on our website.
Item number
-victron-multiplus-ii-48v-3000w-inverter-batterilader-ups-powerassist-dee414
Victron MultiPlus-II 48V/15000W/200-100a – inverter and battery charger in one unitThe Victron MultiPlus-II 48V/15000W/20 0-100a is a combined inverter and battery charger from Victron Energy — two functions in one unit. It delivers 15000 VA of pure sine wave 230V, and automatically switches between shore power and battery operation.Advantages
15000 VA output power: Peak power of 27000 W for motor starts and short-term loads.
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power, preventing the site's circuit breaker from tripping.
Pure sine wave: Same power quality as the grid — also for sensitive electronics.
Applications
Camper vans and boats, where both shore power and battery operation must be managed automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
PowerControl / PowerAssist
Yes
AC input
input voltage range: 187 - 265VAC, / input frequency: 45 - 65 Hz
Max. feed through current
100 A
Input voltage range
38 - 66 V
Output
output voltage: 230VAC ± 2 % / Frequency: 50 Hz ± 0.1 %
Continuous output power at 25 °C
15000 VA
Continuous output power at 40 °C
10000 W
Continuous output power at 65 °C
7000 W
Max. feed-in power
15000 VA
Peak power
27000 W
Max. efficiency
96 %
Zero-load consumption
55 W
Charge voltage absorption
57.6 V
Charge voltage float
55.2 V
Storage mode
52.8 V
Charge current house battery
200 A
Auxiliary output
Yes (50 A)
External AC current sensor (optional)
100 A
Programmable relay
Yes
Protection
a - g
VE.Bus communication port
Three-phase and parallel(6) operation, remote monitoring and system integration
General purpose com. port
Yes, 2x
Common characteristics
Operating temp.: -40 to +65 °C (-40 – 150°F) / (fan-assisted cooling) / Humidity (non-condensing): max. 95 % / Maximum altitude: 2000 m
Material and color
steel, blue RAL 5012 / Pollution degree 2, OVC3
Pollution degree
OVC3
Protection class
IP 22
Battery connections
Four M8 bolts (2 positive and 2 negative connections)
AC connections
Bolts M6
Weight
80 kg
Dimensions (h × w × d)
810 × 405 × 217 mm
Safety
EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2
Emission / immunity
EN 55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Uninterruptible Power Supply (UPS)
Please consult certificates on our website.
Anti-islanding
Please consult certificates on our website.
Item number
-victron-multiplus-ii-48v-15000w-inverter-batterilader-ups-powerassist-a68580
Victron MultiPlus-II GX 48V/3000W/32-35A – inverter and battery charger in one unitThe Victron MultiPlus-II GX 48V/3000W/32-35A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It supplies the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power and prevents the site fuse from tripping.
Automatic transfer switch: Switches automatically between shore power and battery operation without interruption (32 A).
Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics.
Built-in GX unit: Full monitoring and remote control via the VRM Portal without extra hardware.
Application
Motorhomes and boats where both shore power and battery operation need to be managed automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
PowerControl and PowerAssist
Yes
Automatic transfer switch
32 A
Max. AC input current
32 A
Auxiliary output
Yes (32 A)
Input voltage range
38 – 66 V
Output in inverter mode
output voltage: 230 VAC ± 2 % Frequency: 50 Hz ± 0.1 %
Cont. output power at 25°C
3000 VA
Cont. output power at
2200 W
Cont. output power at 65°C
1700 W
Max. feed-through power
3000 VA
Peak power
5500 W
Max. efficiency
95 %
Zero-load consumption
11 W
AC input
input voltage range: 187-265 VAC input frequency: 45 – 65 Hz
Charge voltage absorption
28.8 V
Charge voltage float
28.8 V
Storage mode
52.8 V
Max. battery charge current
35 A
Battery temperature sensor
optional. Order number: ASS000001000
Programmable (AUX) relay
Yes
Auxiliary power supply
12V / 100 mA
Programmable open collector output
70 V / 100 mA
Analog-digital aux inputs
Yes, 2x
Temperature sensor
Yes
Voltage sense contacts
Yes
Protection
a - g
VE.Bus communication port
for parallel and three-phase operation, remote monitoring and system integration
General purpose communication port
Yes, 2x
Interfaces
VE.Can, USB, Ethernet, VE.Direct, Wi-Fi
External AC current sensor (optional)
100 A
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan-assisted cooling). Maximum Altitude 2000 m
Humidity (non-condensing)
max. 95 %
Material and color
steel, blue RAL 5012
Protection class
IP22
Battery connection
M8 bolts
230VAC connection
screw terminals 13 mm² (6 AWG)
Weight
20 kg
Dimensions (h × w × d)
506 × 275 × 147 mm
Safety
EN-IEC 62019-1, EN-IEC 6201-2, EN-IEC 60335-1, EN-IEC 60335-2-29
Emission / immunity
IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Uninterruptible Power Supply (UPS)
IEC 62040-1
Item number
-victron-multiplus-ii-gx-48v-3000w-inverter-battery-charger-ups-powerassist-286deb
Victron MultiPlus-II GX 48V/5000W/70A – inverter and battery charger in one unitThe Victron MultiPlus-II GX 48V/5000W/70A is a combined inverter and battery charger from Victron Energy — two functions in one unit. It provides the installation with pure sine wave 230V and automatically switches between shore power and battery operation.Advantages
PowerAssist and PowerControl: The unit supplements a weak shore connection with battery power, preventing the site's fuse from tripping.
Automatic transfer switch: Switches automatically between shore power and battery operation without interruption (50 A).
Pure sine wave: The same power quality as the electrical grid — even for sensitive electronics.
Built-in GX unit: Full monitoring and remote control via the VRM Portal without extra hardware.
Application
Motorhomes and boats where both shore power and battery operation must be handled automatically.
Off-grid and hybrid systems with solar panels and generators.
Emergency power systems and energy storage for residential and commercial use.
Specifications
Specification
Details
PowerControl and PowerAssist
Yes
Automatic transfer switch
50 A
Max. AC input current
50 A
Auxiliary output
Yes (32 A)
Input voltage range
38 – 66 V
Output in inverter mode
output voltage: 230 VAC ± 2 % Frequency: 50 Hz ± 0.1 %
Cont. output power at 25°C
5000 VA
Cont. output power at
3700 W
Cont. output power at 65°C
3000 W
Max. feedback power
5000 VA
Peak power
9000 W
Max. efficiency
96 %
Zero-load consumption
18 W
AC input
input voltage range: 187-265 VAC input frequency: 45 – 65 Hz
Charge voltage absorption
57.6 V
Charge voltage float
55.2 V
Storage mode
52.8 V
Max. battery charge current
70 A
Battery temperature sensor
optional. Order number: ASS000001000
Programmable (AUX) relay
Yes
Auxiliary power supply
12V / 100 mA
Programmable open collector output
70 V / 100 mA
Analog-digital aux inputs
Yes, 2x
Temperature sensor
Yes
Voltage sense contacts
Yes
Protection
a - g
VE.Bus communication port
for parallel and three-phase operation, remote monitoring and system integration
General purpose communication port
Yes, 2x
Interfaces
VE.Can, USB, Ethernet, VE.Direct, Wi-Fi
External AC current sensor (optional)
100 A
Remote on/off
Yes
Operating temperature range
-40 to +65 °C (fan-assisted cooling). Maximum Altitude 2000 m
Humidity (non-condensing)
max. 95 %
Material and color
steel, blue RAL 5012
Protection class
IP22
Battery connection
M8 bolts
230VAC connection
screw terminals 13 mm² (6 AWG)
Weight
31 kg
Dimensions (h × w × d)
565 × 323 × 148 mm
Safety
EN-IEC 62019-1, EN-IEC 6201-2, EN-IEC 60335-1, EN-IEC 60335-2-29
Emission / immunity
IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Emergency power supply (UPS)
IEC 62040-1
Item number
-victron-multiplus-ii-gx-48v-5000w-inverter-batterilader-ups-powerassist-c68c6f
Victron SmartShunt 300A/50 mV Bluetooth monitor – battery monitoring with precise consumption measurementThe Victron SmartShunt 300A/50 mV Bluetooth monitor is a battery monitor from Victron Energy that measures the actual current flowing in and out of the battery bank. You get the state of charge in percentage, consumption, and expected time remaining — far more accurate than a simple voltage gauge, and built-in Bluetooth makes it possible to track operation and change settings directly from the VictronConnect app.Advantages
Precise state of charge in percentage: Measures the actual current into and out of the battery — not just the voltage.
Time remaining and consumption: Shows how much power is left at the current consumption level.
Built-in Bluetooth: All data directly on your phone in the VictronConnect app.
History: Stores data on deepest discharge, cycles, and voltage levels for troubleshooting.
Application
Precise display of the battery's state of charge in motorhomes and boats.
Monitoring of consumption and remaining capacity in solar power systems.
Troubleshooting and documentation of the battery's condition over time.
Specifications
Specification
Details
Item number
victron-smartshunt-300a-24aa3e
Victron Lynx Power In (M10) – original Victron accessoryThe Victron Lynx Power In (M10) is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Benefits
Original Victron accessory: Fits directly into the Victron system without modification.
Reliable quality: Materials and workmanship designed to last in marine and vehicle environments.
Application
Original accessory that fits directly into the Victron system.
Motorhomes, boats, summer cottages, and off-grid installations.
Safe and reliable installation.
Specifications
Specification
Details
Enclosure dimensions (hxwxd)
290 × 170 × 80 mm
Unit weight
2.1 kg
Busbar material
Tinned copper
Busbar dimensions (hxw)
8 × 30 mm
Enclosure material
ABS
Operating temperature range
-40 °C to +60 °C
Storage temperature
-40 °C to +60 °C
Humidity
max. 95% (non-condensing)
Protection class
IP22
Item number
victron-lynx-power-in-c34ca5
Victron Lynx Distributor (M10) – original Victron accessoryThe Victron Lynx Distributor (M10) is an original accessory from Victron Energy. It fits directly into the Victron system and is built to last in demanding marine and vehicle environments.Advantages
Original Victron accessory: Fits the Victron system directly without any modifications.
Reliable quality: Materials and workmanship that endure in marine and vehicle environments.
Application
Original accessory that fits the Victron system directly.
Camper van, boat, summer cottage, and off-grid installations.
Safe and reliable installation.
Specifications
Specification
Details
Supported system voltages
12, 24, or 48V
Reverse polarity protection
Yes (1)
Current rating
1000Adc continuous
Power consumption
Maximum 100 mA (with all LEDs illuminated)
Voltage range
9 - 60Vdc
Enclosure material
ABS
Enclosure dimensions (hxlxw)
290 × 170 × 80 mm
Unit weight
2.2 kg
Busbar material
Tinned copper
Busbar dimensions (hxw)
8 × 30 mm
Operating temperature range
-40 °C to +60°
Storage temperature
-40 °C to +60°
Humidity
max. 95% (non-condensing)
Protection class
IP22
Item number
victron-lynx-distributor-m10-00e868
The entire Victron Energy range: MultiPlus and Quattro inverter/chargers, SmartSolar MPPT controllers, EasySolar all-in-one, Phoenix inverters, Orion DC-DC converters, battery chargers and accessories. Use the submenu to go directly to a product series.
