{"title":"Victron BMS","description":"\u003cp\u003eBMS for Victron lithium batteries. The BMS monitors each cell and disconnects charging or consumption if the voltage or temperature deviates from the system parameters – mandatory for the Smart series.\u003c\/p\u003e","products":[{"product_id":"victron-smart-bms-12-200","title":"Victron Smart BMS 12\/200","description":"\u003ch2\u003eVictron Smart BMS 12\/200 – Battery Management System for lithium batteries\u003c\/h2\u003e\u003cp\u003eThe Victron Smart BMS 12\/200 is a battery management system (BMS) from Victron Energy for Li FePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eProtects the cells:\u003c\/strong\u003e Disconnects charging and consumption in the event of cell overvoltage or undervoltage.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eManages the entire system:\u003c\/strong\u003e Sends a signal to the inverter, charger, and MPPT so they react before the battery is damaged.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFor Victron LiFePO4:\u003c\/strong\u003e Designed for Victron Smart Lithium batteries and their cell balancing.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBluetooth built-in:\u003c\/strong\u003e View cell voltages and status in the VictronConnect app.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eProtection of Victron LiFePO4 batteries against overvoltage and undervoltage.\u003c\/li\u003e\n\n\u003cli\u003eLithium systems with inverter, charger, and MPPT from Victron.\u003c\/li\u003e\n\n\u003cli\u003eSafe operation of lithium banks in boats and motorhomes.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eSpecification\u003c\/th\u003e\n\n\u003cth\u003eDetails\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSystem+ port - max. charge and discharge current\u003c\/td\u003e\n\n\u003ctd\u003e200 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePeak discharge current\u003c\/td\u003e\n\n\u003ctd\u003e400 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eInput voltage\u003c\/td\u003e\n\n\u003ctd\u003e\u0026gt;13 V\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCurrent consumption, remote on\u003c\/td\u003e\n\n\u003ctd\u003e17.5 mA (excluding consumption output and charge output current)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCurrent consumption, remote off\u003c\/td\u003e\n\n\u003ctd\u003e6.5 mA (BMS functionality still active) \/ 4.5 mA (BMS functionality disabled)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eConsumption disconnect output\u003c\/td\u003e\n\n\u003ctd\u003eNormally high (Vbat – 0.1 V) \/ Source current limit: 10 mA (short-circuit protected) \/ Sink current: 0 A (output free floating)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCharge disconnect output\u003c\/td\u003e\n\n\u003ctd\u003eNormally high (Vbat – 0.1 V) \/ Source current limit: 10 mA (short-circuit protected) \/ Sink current: 0 A (output free floating)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePre-alarm output\u003c\/td\u003e\n\n\u003ctd\u003eNormally low \/ High (Vbat) in case of alarm, max. 1 A \/ (not short-circuit proof)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eRemote (or System) on\/off: Remote L and Remote H\u003c\/td\u003e\n\n\u003ctd\u003eUse modes: \/ ON when L and H terminals are interconnected \/ ON when L terminal is pulled to battery minus (V \u0026lt; 5 V) \/ ON when H terminal is high (V \u0026gt; 3 V) \/ OFF in all other conditions\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\n\u003ctd\u003e-40 °C to +60 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eHumidity\u003c\/td\u003e\n\n\u003ctd\u003e100 % \/ 95 %\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProtection, electronics\u003c\/td\u003e\n\n\u003ctd\u003eIP65\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDC power connection\u003c\/td\u003e\n\n\u003ctd\u003eM8\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMounting\u003c\/td\u003e\n\n\u003ctd\u003e10Nm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDC connector battery minus\u003c\/td\u003e\n\n\u003ctd\u003eFaston female, 6.3 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWeight\u003c\/td\u003e\n\n\u003ctd\u003e2 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\n\u003ctd\u003e65 × 120 × 340 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eEmission\u003c\/td\u003e\n\n\u003ctd\u003eEN 61000-6-3, EN 55014-1\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eImmunity\u003c\/td\u003e\n\n\u003ctd\u003eEN 61000-6-2, EN 61000-6-1, EN 55014-2\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAutomotive directive\u003c\/td\u003e\n\n\u003ctd\u003eECE R10-5\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAlternator port - max. charge current\u003c\/td\u003e\n\n\u003ctd\u003e100 A (with a 125 A fuse)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eItem number\u003c\/td\u003e\n\n\u003ctd\u003evictron-smart-bms-12-200-c1fed2\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-BMS-overview-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDownload datasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":65557097840989,"sku":"victron-smart-bms-12-200-c1fed2","price":1759.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/7649\/7757\/files\/67ff119d80d5643517f6eb53.png?v=1786552710"},{"product_id":"victron-lynx-smart-bms-1000","title":"Victron Lynx Smart BMS 1000","description":"\u003ch2\u003eVictron Lynx Smart BMS 1000 – battery management system for lithium batteries\u003c\/h2\u003e\u003cp\u003eThe Victron Lynx Smart BMS 1000 is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eProtects the cells:\u003c\/strong\u003e Disconnects charging and discharging in the event of over- or undervoltage in the cells.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eControls the entire system:\u003c\/strong\u003e Sends signals to the inverter, charger, and MPPT so they react before the battery is damaged.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFor Victron LiFePO4:\u003c\/strong\u003e Designed for Victron Smart Lithium batteries and their cell balancing.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBluetooth built-in:\u003c\/strong\u003e View cell voltages and status in the VictronConnect app.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eProtection of Victron LiFePO4 batteries against over- and undervoltage.\u003c\/li\u003e\n\n\u003cli\u003eLithium systems with inverters, chargers, and MPPTs from Victron.\u003c\/li\u003e\n\n\u003cli\u003eSafe operation of lithium banks in boats and motorhomes.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eSpecification\u003c\/th\u003e\n\n\u003cth\u003eDetails\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSupply voltage range\u003c\/td\u003e\n\n\u003ctd\u003e9 – 60Vdc\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSupported system voltages\u003c\/td\u003e\n\n\u003ctd\u003e12, 24, or 48V\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eReverse polarity protection\u003c\/td\u003e\n\n\u003ctd\u003eNo\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMain safety contactor continuous current rating\u003c\/td\u003e\n\n\u003ctd\u003e500 A continuous\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMain safety contactor peak current rating\u003c\/td\u003e\n\n\u003ctd\u003e600 A for 5 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower consumption OFF mode\u003c\/td\u003e\n\n\u003ctd\u003e0.3 mA for all system voltages\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower consumption in Standby mode\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 0.6 W (50 mA at 12V)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower consumption in ON mode\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 2.6 W (217 mA at 12V) depending on state of relays\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMin. load resistance for pre-charge\u003c\/td\u003e\n\n\u003ctd\u003e10Ω and above for 12V systems \/ 20Ω and above for 24V and 48V systems\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAUX output max. current rating\u003c\/td\u003e\n\n\u003ctd\u003e1.1 A continuous, protected by resettable fuse\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAllow-to-charge port max. current rating\u003c\/td\u003e\n\n\u003ctd\u003e0.5 A at 60Vdc, protected by resettable fuse\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAllow-to-discharge port max. current rating\u003c\/td\u003e\n\n\u003ctd\u003e0.5 A at 60Vdc, protected by resettable fuse\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProgrammable relay (SPDT) max. current rating\u003c\/td\u003e\n\n\u003ctd\u003e2 A at 60Vdc\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWeight\u003c\/td\u003e\n\n\u003ctd\u003e2.5 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\n\u003ctd\u003eLITHIUM\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\n\u003ctd\u003e170 × 80 × 186 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eItem number\u003c\/td\u003e\n\n\u003ctd\u003eLYN034170210\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-BMS-NG-overview-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDownload datasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":65807363015005,"sku":"LYN034170210","price":8249.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/7649\/7757\/files\/2Ferp_2F96399343597939865241.jpg?v=1788478690"},{"product_id":"victron-lynx-smart-bms-500-m8","title":"Victron Lynx Smart BMS 500 (M8)","description":"\u003ch2\u003eVictron Lynx Smart BMS 500 (M8) – Battery Management System for lithium batteries\u003c\/h2\u003e\u003cp\u003eThe Victron Lynx Smart BMS 500 (M8) is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eProtects the cells:\u003c\/strong\u003e Disconnects charging and consumption in the event of high or low cell voltage.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eControls the entire system:\u003c\/strong\u003e Sends a signal to the inverter, charger, and MPPT so they react before the battery is damaged.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFor Victron LiFePO4:\u003c\/strong\u003e Designed for Victron Smart Lithium batteries and their cell balancing.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBluetooth built-in:\u003c\/strong\u003e View cell voltages and status in the VictronConnect app.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eProtection of Victron LiFePO4 batteries against over- and under-voltage.\u003c\/li\u003e\n\n\u003cli\u003eLithium systems with inverter, charger, and MPPT from Victron.\u003c\/li\u003e\n\n\u003cli\u003eSafe operation of lithium banks in boats and motorhomes.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eSpecification\u003c\/th\u003e\n\n\u003cth\u003eDetails\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSupply voltage range\u003c\/td\u003e\n\n\u003ctd\u003e9 – 60Vdc\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSupported system voltages\u003c\/td\u003e\n\n\u003ctd\u003e12, 24, or 48V\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eReverse polarity protection\u003c\/td\u003e\n\n\u003ctd\u003eNo\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMain safety contactor continuous current rating\u003c\/td\u003e\n\n\u003ctd\u003e500 A continuous\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMain safety contactor peak current rating\u003c\/td\u003e\n\n\u003ctd\u003e600 A for 5 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower consumption OFF state\u003c\/td\u003e\n\n\u003ctd\u003e0.3 mA for all system voltages\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower consumption in Standby state\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 0.6 W (50 mA at 12V)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower consumption in ON state\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 2.6 W (217 mA at 12V) depending on state of relays\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMin. consumption resistance for pre-charging\u003c\/td\u003e\n\n\u003ctd\u003e10Ω and above for 12V systems \/ 20Ω and above for 24V and 48V systems\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAUX output max. current rating\u003c\/td\u003e\n\n\u003ctd\u003e1.1 A continuous, protected by resettable fuse\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAllow-to-charge port max. current rating\u003c\/td\u003e\n\n\u003ctd\u003e0.5 A at 60Vdc, protected by resettable fuse\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAllow-to-discharge port max. current rating\u003c\/td\u003e\n\n\u003ctd\u003e0.5 A at 60Vdc, protected by resettable fuse\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProgrammable relay (SPDT) max. current rating\u003c\/td\u003e\n\n\u003ctd\u003e2 A at 60Vdc\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWeight\u003c\/td\u003e\n\n\u003ctd\u003e2.19 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\n\u003ctd\u003eLITHIUM\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\n\u003ctd\u003e90 × 30 × 100 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eItem number\u003c\/td\u003e\n\n\u003ctd\u003eLYN034160200\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-BMS-NG-overview-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDownload datasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":65807363047773,"sku":"LYN034160200","price":5029.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/7649\/7757\/files\/2Ferp_2F158904860158589123261.jpg?v=1788478693"},{"product_id":"victron-lynx-smart-bms-1000-ng-m10","title":"Victron Lynx Smart BMS 1000 NG (M10)","description":"\u003ch2\u003eVictron Lynx Smart BMS 1000 NG (M10) – battery management system for lithium batteries\u003c\/h2\u003e\u003cp\u003eThe Victron Lynx Smart BMS 1000 NG (M10) is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eProtects the cells:\u003c\/strong\u003e Disconnects charging and consumption in the event of too high or too low cell voltage.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eControls the entire system:\u003c\/strong\u003e Sends a signal to the inverter, charger, and MPPT so they react before the battery is damaged.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFor Victron LiFePO4:\u003c\/strong\u003e Designed for Victron Smart Lithium batteries and their cell balancing.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBluetooth built-in:\u003c\/strong\u003e View cell voltages and status in the VictronConnect app.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eProtection of Victron LiFePO4 batteries against over- and undervoltage.\u003c\/li\u003e\n\n\u003cli\u003eLithium systems with inverters, chargers, and MPPT from Victron.\u003c\/li\u003e\n\n\u003cli\u003eSafe operation of lithium banks in boats and motorhomes.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eSpecification\u003c\/th\u003e\n\n\u003cth\u003eDetails\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSupply voltage range\u003c\/td\u003e\n\n\u003ctd\u003e9 – 60Vdc\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSupported system voltages\u003c\/td\u003e\n\n\u003ctd\u003e12, 24, or 48V\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eReverse polarity protection\u003c\/td\u003e\n\n\u003ctd\u003eNo\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMain safety contactor continuous current rating\u003c\/td\u003e\n\n\u003ctd\u003e500 A continuous\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMain safety contactor peak current rating\u003c\/td\u003e\n\n\u003ctd\u003e600 A for 5 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower consumption OFF state\u003c\/td\u003e\n\n\u003ctd\u003e0.3 mA for all system voltages\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower consumption in Standby state\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 0.6 W (50 mA at 12V)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower consumption in ON state\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 2.6 W (217 mA at 12V) depending on state of relays\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMin. consumption resistance for pre-charging\u003c\/td\u003e\n\n\u003ctd\u003e10Ω and above for 12V systems \/ 20Ω and above for 24V and 48V systems\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAUX output max. current rating\u003c\/td\u003e\n\n\u003ctd\u003e1.1 A continuous, protected by resettable fuse\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAllow-to-charge port max. current rating\u003c\/td\u003e\n\n\u003ctd\u003e0.5 A at 60Vdc, protected by resettable fuse\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAllow-to-discharge port max. current rating\u003c\/td\u003e\n\n\u003ctd\u003e0.5 A at 60Vdc, protected by resettable fuse\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProgrammable relay (SPDT) max. current rating\u003c\/td\u003e\n\n\u003ctd\u003e2 A at 60Vdc\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWeight\u003c\/td\u003e\n\n\u003ctd\u003e1.4 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\n\u003ctd\u003eLITHIUM\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\n\u003ctd\u003e80 × 186 × 170 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eItem number\u003c\/td\u003e\n\n\u003ctd\u003eLYN034170310\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-BMS-NG-overview-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDownload datasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":65807363080541,"sku":"LYN034170310","price":8789.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/7649\/7757\/files\/2Ferp_2F99925411072049505671.jpg?v=1788478693"},{"product_id":"victron-lynx-smart-bms-500-m10","title":"Victron Lynx Smart BMS 500 (M10)","description":"\u003ch2\u003eVictron Lynx Smart BMS 500 (M10) – battery management system for lithium batteries\u003c\/h2\u003e\u003cp\u003eThe Victron Lynx Smart BMS 500 (M10) is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eProtects the cells:\u003c\/strong\u003e Disconnects charging and consumption in case of excessively high or low cell voltage.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eControls the entire system:\u003c\/strong\u003e Sends a signal to the inverter, charger, and MPPT so they react before the battery is damaged.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFor Victron LiFePO4:\u003c\/strong\u003e Designed for Victron Smart Lithium batteries and their cell balancing.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBuilt-in Bluetooth:\u003c\/strong\u003e View cell voltages and status in the VictronConnect app.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eProtection of Victron LiFePO4 batteries against over- and undervoltage.\u003c\/li\u003e\n\n\u003cli\u003eLithium systems with inverter, charger, and MPPT from Victron.\u003c\/li\u003e\n\n\u003cli\u003eSafe operation of lithium banks in boats and motorhomes.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eSpecification\u003c\/th\u003e\n\n\u003cth\u003eDetails\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSupply voltage range\u003c\/td\u003e\n\n\u003ctd\u003e9 – 60Vdc\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSupported system voltages\u003c\/td\u003e\n\n\u003ctd\u003e12, 24, or 48V\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eReverse polarity protection\u003c\/td\u003e\n\n\u003ctd\u003eNo\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMain safety contactor continuous current rating\u003c\/td\u003e\n\n\u003ctd\u003e500 A continuous\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMain safety contactor peak current rating\u003c\/td\u003e\n\n\u003ctd\u003e600 A for 5 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower consumption OFF state\u003c\/td\u003e\n\n\u003ctd\u003e0.3 mA for all system voltages\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower consumption in Standby state\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 0.6 W (50 mA at 12V)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower consumption in ON state\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 2.6 W (217 mA at 12V) depending on state of relays\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMin. load resistance for pre-charge\u003c\/td\u003e\n\n\u003ctd\u003e10Ω and above for 12V systems \/ 20Ω and above for 24V and 48V systems\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAUX output max. current rating\u003c\/td\u003e\n\n\u003ctd\u003e1.1 A continuous, protected by resettable fuse\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAllow-to-charge port max. current rating\u003c\/td\u003e\n\n\u003ctd\u003e0.5 A at 60Vdc, protected by resettable fuse\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAllow-to-discharge port max. current rating\u003c\/td\u003e\n\n\u003ctd\u003e0.5 A at 60Vdc, protected by resettable fuse\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProgrammable relay (SPDT) max. current rating\u003c\/td\u003e\n\n\u003ctd\u003e2 A at 60Vdc\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWeight\u003c\/td\u003e\n\n\u003ctd\u003e2.2 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\n\u003ctd\u003eLITHIUM\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\n\u003ctd\u003e80 × 186 × 170 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eItem number\u003c\/td\u003e\n\n\u003ctd\u003eLYN034160210\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-BMS-NG-overview-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDownload datasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":65807363113309,"sku":"LYN034160210","price":6189.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/7649\/7757\/files\/2Ferp_2F107494829261389249001.jpg?v=1788478693"},{"product_id":"victron-lynx-smart-bms-500-ng-m10","title":"Victron Lynx Smart BMS 500 NG (M10)","description":"\u003ch2\u003eVictron Lynx Smart BMS 500 NG (M10) – Battery management system for lithium batteries\u003c\/h2\u003e\u003cp\u003eThe Victron Lynx Smart BMS 500 NG (M10) is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.\u003c\/p\u003e\u003ch3\u003eBenefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eProtects cells:\u003c\/strong\u003e Disconnects charging and discharging in case of excessively high or low cell voltage.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eControls the entire system:\u003c\/strong\u003e Sends a signal to the inverter, charger, and MPPT so they react before the battery is damaged.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFor Victron LiFePO4:\u003c\/strong\u003e Designed for Victron Smart Lithium batteries and their cell balancing.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBluetooth built-in:\u003c\/strong\u003e View cell voltages and status in the VictronConnect app.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eProtection of Victron LiFePO4 batteries against over- and undervoltage.\u003c\/li\u003e\n\n\u003cli\u003eLithium systems with inverter, charger, and MPPT from Victron.\u003c\/li\u003e\n\n\u003cli\u003eSafe operation of lithium banks in boats and motorhomes.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eSpecification\u003c\/th\u003e\n\n\u003cth\u003eDetails\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSupply voltage range\u003c\/td\u003e\n\n\u003ctd\u003e9 – 60Vdc\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSupported system voltages\u003c\/td\u003e\n\n\u003ctd\u003e12, 24, or 48V\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eReverse polarity protection\u003c\/td\u003e\n\n\u003ctd\u003eNo\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMain safety contactor continuous current rating\u003c\/td\u003e\n\n\u003ctd\u003e500 A continuous\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMain safety contactor peak current rating\u003c\/td\u003e\n\n\u003ctd\u003e600 A for 5 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower consumption OFF state\u003c\/td\u003e\n\n\u003ctd\u003e0.3 mA for all system voltages\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower consumption in Standby state\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 0.6 W (50 mA at 12V)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower consumption in ON state\u003c\/td\u003e\n\n\u003ctd\u003eApproximately 2.6 W (217 mA at 12V) depending on state of relays\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMin. load resistance for pre-charging\u003c\/td\u003e\n\n\u003ctd\u003e10Ω and above for 12V systems \/ 20Ω and above for 24V and 48V systems\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAUX output max. current rating\u003c\/td\u003e\n\n\u003ctd\u003e1.1 A continuous, protected by resettable fuse\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAllow-to-charge port max. current rating\u003c\/td\u003e\n\n\u003ctd\u003e0.5 A at 60Vdc, protected by resettable fuse\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAllow-to-discharge port max. current rating\u003c\/td\u003e\n\n\u003ctd\u003e0.5 A at 60Vdc, protected by resettable fuse\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProgrammable relay (SPDT) max. current rating\u003c\/td\u003e\n\n\u003ctd\u003e2 A at 60Vdc\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWeight\u003c\/td\u003e\n\n\u003ctd\u003e2.2 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\n\u003ctd\u003eLITHIUM\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\n\u003ctd\u003e80 × 186 × 170 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eItem number\u003c\/td\u003e\n\n\u003ctd\u003eLYN034160310\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-BMS-NG-overview-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDownload datasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":65807364686173,"sku":"LYN034160310","price":6789.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/7649\/7757\/files\/2Ferp_2F25027949169556618951.jpg?v=1788478697"},{"product_id":"victron-kabel-til-smart-bms-cl-12-100","title":"Victron Cable for Smart BMS CL 12-100","description":"\u003ch2\u003eVictron Cable for Smart BMS CL 12-100 – original Victron accessory\u003c\/h2\u003e\u003cp\u003eThe Victron Cable for Smart BMS CL 12-100 is an original accessory from Victron Energy. It fits directly into the Victron system and is built to withstand the demanding environment of marine and vehicle applications.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOriginal Victron accessory:\u003c\/strong\u003e Fits the Victron system directly without any modifications.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eReliable quality:\u003c\/strong\u003e Materials and workmanship that last in marine and vehicle environments.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eOriginal accessory that fits directly into the Victron system.\u003c\/li\u003e\n\n\u003cli\u003eCamper van, boat, summer cottage, and off-grid systems.\u003c\/li\u003e\n\n\u003cli\u003eSafe and reliable installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eSpecification\u003c\/th\u003e\n\n\u003cth\u003eDetails\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eInput voltage\u003c\/td\u003e\n\n\u003ctd\u003e\u0026gt;13 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCurrent consumption, remote on\u003c\/td\u003e\n\n\u003ctd\u003e16 mA (excluding load output and charge output current)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCurrent consumption, remote off\u003c\/td\u003e\n\n\u003ctd\u003e5 mA (BMS functionality still active)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoad disconnect output\u003c\/td\u003e\n\n\u003ctd\u003eNormally high (Vbat – 0.1 V) \/ Source current limit: 10 mA (short-circuit protected) \/ Sink current: 0 A (output free floating)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCharge disconnect output\u003c\/td\u003e\n\n\u003ctd\u003eNormally high (Vbat – 0.1 V) \/ Source current limit: 10 mA (short-circuit protected) \/ Sink current: 0 A (output free floating)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePre-alarm output\u003c\/td\u003e\n\n\u003ctd\u003eNormally free floating \/ High (Vbat) in case of alarm, max. 1 A \/ (not short-circuit proof)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSystem on\/off: Remote L and Remote H\u003c\/td\u003e\n\n\u003ctd\u003eUse modes: \/ ON when L and H terminals are interconnected \/ ON when L terminal is pulled to battery minus (V \u0026lt; 5 V) \/ ON when H terminal is high (V \u0026gt; 3 V) \/ OFF in all other conditions\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\n\u003ctd\u003e-40 °C to +60 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eHumidity\u003c\/td\u003e\n\n\u003ctd\u003e100 % \/ 95 %\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProtection, electronics\u003c\/td\u003e\n\n\u003ctd\u003eIP65\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDC power connection\u003c\/td\u003e\n\n\u003ctd\u003eM8\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMounting\u003c\/td\u003e\n\n\u003ctd\u003e10Nm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDC connector battery minus\u003c\/td\u003e\n\n\u003ctd\u003eFaston female, 6.3 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWeight\u003c\/td\u003e\n\n\u003ctd\u003e1.6 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\n\u003ctd\u003e65 × 120 × 224 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eEmission\u003c\/td\u003e\n\n\u003ctd\u003eEN 61000-6-3, EN 55014-1\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eImmunity\u003c\/td\u003e\n\n\u003ctd\u003eEN 61000-6-2, EN 61000-6-1, EN 55014-2\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAutomotive directive\u003c\/td\u003e\n\n\u003ctd\u003eECE R10-5\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAlternator port - max. charge current\u003c\/td\u003e\n\n\u003ctd\u003e100 A (with a 125 A fuse)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePart number\u003c\/td\u003e\n\n\u003ctd\u003eASS070200100\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-BMS-overview-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDownload datasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":65807366029661,"sku":"ASS070200100","price":129.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/7649\/7757\/files\/Cable_20for_20Smart_20BMS_20CL_2012-100_20to_20MultiPlus.png?v=1791447999"},{"product_id":"victron-small-bms","title":"Victron SmallBMS","description":"\u003ch2\u003eVictron Small BMS – battery management system for lithium batteries\u003c\/h2\u003e\u003cp\u003eThe Victron Small BMS is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged.\u003c\/p\u003e\u003ch3\u003eBenefits\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eProtects cells:\u003c\/strong\u003e Disconnects charging and consumption in case of excessively high or low cell voltage.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eControls the entire system:\u003c\/strong\u003e Sends a signal to the inverter , charger, and MPPT so they react before the battery is damaged.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFor Victron LiFePO4:\u003c\/strong\u003e Designed for Victron Smart Lithium batteries and their cell balancing.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eProtection of Victron LiFePO4 batteries against over- and undervoltage.\u003c\/li\u003e\n\n\u003cli\u003eLithium systems with inverter, charger, and MPPT from Victron.\u003c\/li\u003e\n\n\u003cli\u003eSafe operation of lithium banks in boats and motorhomes.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eSpecification\u003c\/th\u003e\n\n\u003cth\u003eDetails\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWeight\u003c\/td\u003e\n\n\u003ctd\u003e0.09 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\n\u003ctd\u003eLITHIUM\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePart number\u003c\/td\u003e\n\n\u003ctd\u003eBMS400100000\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":65807366848861,"sku":"BMS400100000","price":379.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/7649\/7757\/files\/2Ferp_2F145131359052747899021.jpg?v=1788478726"},{"product_id":"victron-small-bms-ng","title":"Victron Small BMS NG","description":"\u003ch2\u003eVictron Small BMS NG – battery management system for lithium batteries\u003c\/h2\u003e\u003cp\u003eThe Victron Small BMS NG is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eProtects the cells:\u003c\/strong\u003e Disconnects charging and consumption in case of excessively high or low cell voltage.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eControls the entire system:\u003c\/strong\u003e Sends a signal to the inverter, charger, and MPPT so they react before the battery is damaged.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFor Victron LiFePO4:\u003c\/strong\u003e Designed for Victron Smart Lithium batteries and their cell balancing.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eProtection of Victron LiFePO4 batteries against over- and undervoltage.\u003c\/li\u003e\n\n\u003cli\u003eLithium systems with inverter, charger, and MPPT from Victron.\u003c\/li\u003e\n\n\u003cli\u003eSafe operation of lithium banks in boats and motorhomes.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eSpecification\u003c\/th\u003e\n\n\u003cth\u003eDetails\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWeight\u003c\/td\u003e\n\n\u003ctd\u003e0.1 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\n\u003ctd\u003eLITHIUM\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\n\u003ctd\u003e23 × 106 × 43 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eItem number\u003c\/td\u003e\n\n\u003ctd\u003eBMS400100300\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-BMS-NG-overview-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDownload datasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":65807366881629,"sku":"BMS400100300","price":709.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/7649\/7757\/files\/2Ferp_2F23631854003832291121.jpg?v=1788478726"},{"product_id":"victron-ve-bus-bms-ng","title":"Victron VE.Bus BMS NG","description":"\u003ch2\u003eVictron VE.Bus BMS NG – battery management system for lithium batteries\u003c\/h2\u003e\u003cp\u003eThe Victron VE.Bus BMS NG is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eProtects the cells:\u003c\/strong\u003e Disconnects charging and loads in case of over- or undervoltage.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eControls the entire system:\u003c\/strong\u003e Sends a signal to the inverter, charger, and MPPT so they react before the battery is damaged.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFor Victron LiFePO4:\u003c\/strong\u003e Designed for Victron Smart Lithium batteries and their cell balancing.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eProtection of Victron LiFePO4 batteries against over- and undervoltage.\u003c\/li\u003e\n\n\u003cli\u003eLithium systems with inverters, chargers, and MPPTs from Victron.\u003c\/li\u003e\n\n\u003cli\u003eSafe operation of lithium banks in boats and motorhomes.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eSpecification\u003c\/th\u003e\n\n\u003cth\u003eDetails\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCurrent draw - regular operation\u003c\/td\u003e\n\n\u003ctd\u003e10 mA (excluding load disconnect current)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCurrent draw - low cell voltage\u003c\/td\u003e\n\n\u003ctd\u003e2 mA\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCurrent draw - switched off via remote on\/off terminal\u003c\/td\u003e\n\n\u003ctd\u003e1.50 mA\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eGX-power output\u003c\/td\u003e\n\n\u003ctd\u003e1 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAux-in input\u003c\/td\u003e\n\n\u003ctd\u003e1 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePre-alarm output current rating\u003c\/td\u003e\n\n\u003ctd\u003e1 A, not short-circuit protected\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoad disconnect output\u003c\/td\u003e\n\n\u003ctd\u003eNormally high (output voltage ≈ supply voltage – 1 V) \/ Floating when load needs to be disconnected \/ Source current limit: 1 A \/ Sink current: 0 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCharge disconnect output\u003c\/td\u003e\n\n\u003ctd\u003eNormally high, (output voltage ≈ supply voltage – 1 V) \/ Floating when charger should be disconnected \/ Source current limit: 10 mA \/ Sink current: 0 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eRemote on\/off\u003c\/td\u003e\n\n\u003ctd\u003eUsage modes to turn system on or off: \/ ON when L and H terminals are interconnected (switch or relay contact) \/ ON when L terminal is pulled to battery minus (V\u0026lt;3.5 V) \/ ON when H terminal is high (2.9 V \u0026lt; VH \u0026lt; Vbat) \/ OFF in all other conditions\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eVE.Bus communications ports\u003c\/td\u003e\n\n\u003ctd\u003e2 x RJ45 sockets to connect to all VE.Bus products\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eInput voltage range\u003c\/td\u003e\n\n\u003ctd\u003e9 – 70 Vdc\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\n\u003ctd\u003eABS\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eColour\u003c\/td\u003e\n\n\u003ctd\u003eMatte black with a blue sticker\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWeight\u003c\/td\u003e\n\n\u003ctd\u003e120 g\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\n\u003ctd\u003e23.8 mm × 94.5 mm × 105.5 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\n\u003ctd\u003eLITHIUM\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eItem number\u003c\/td\u003e\n\n\u003ctd\u003eBMS300200300\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-BMS-NG-overview-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDownload datasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":65807366979933,"sku":"BMS300200300","price":1279.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/7649\/7757\/files\/2Ferp_2F155875918917937361691.jpg?v=1788478730"},{"product_id":"victron-smart-bms-cl-12-100","title":"Victron Smart BMS CL 12-100","description":"\u003ch2\u003eVictron Smart BMS CL 12-100 – battery management system for lithium batteries\u003c\/h2\u003e\u003cp\u003eThe Victron Smart BMS CL 12-100 is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged, and built-in Bluetooth makes it possible to monitor operation and change settings directly from the VictronConnect app.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eProtects the cells:\u003c\/strong\u003e Disconnects charging and consumption in the event of excessively high or low cell voltage.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eControls the entire system:\u003c\/strong\u003e Sends a signal to the inverter, charger, and MPPT so they react before the battery is damaged.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFor Victron LiFePO4:\u003c\/strong\u003e Designed for Victron Smart Lithium batteries and their cell balancing.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBluetooth built-in:\u003c\/strong\u003e View cell voltages and status in the VictronConnect app.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eProtection of Victron LiFePO4 batteries against over- and undervoltage.\u003c\/li\u003e\n\n\u003cli\u003eLithium systems with inverter, charger, and MPPT from Victron.\u003c\/li\u003e\n\n\u003cli\u003eSafe operation of lithium banks in boats and motorhomes.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eSpecification\u003c\/th\u003e\n\n\u003cth\u003eDetails\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eInput voltage\u003c\/td\u003e\n\n\u003ctd\u003e\u0026gt;13 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCurrent consumption, remote on\u003c\/td\u003e\n\n\u003ctd\u003e16 mA (excluding load output and charge output current)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCurrent consumption, remote off\u003c\/td\u003e\n\n\u003ctd\u003e5 mA (BMS functionality still active)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoad disconnect output\u003c\/td\u003e\n\n\u003ctd\u003eNormally high (Vbat – 0.1 V) \/ Source current limit: 10 mA (short-circuit protected) \/ Sink current: 0 A (output free floating)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCharge disconnect output\u003c\/td\u003e\n\n\u003ctd\u003eNormally high (Vbat – 0.1 V) \/ Source current limit: 10 mA (short-circuit protected) \/ Sink current: 0 A (output free floating)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePre-alarm output\u003c\/td\u003e\n\n\u003ctd\u003eNormally free floating \/ High (Vbat) in case of alarm, max. 1 A \/ (not short-circuit proof)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSystem on\/off: Remote L and Remote H\u003c\/td\u003e\n\n\u003ctd\u003eUse modes: \/ ON when L and H terminals are interconnected \/ ON when L terminal is pulled to battery minus (V \u0026lt; 5 V) \/ ON when H terminal is high (V \u0026gt; 3 V) \/ OFF in all other conditions\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\n\u003ctd\u003e-40 °C to +60 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eHumidity\u003c\/td\u003e\n\n\u003ctd\u003e100 % \/ 95 %\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProtection, electronics\u003c\/td\u003e\n\n\u003ctd\u003eIP65\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDC power connection\u003c\/td\u003e\n\n\u003ctd\u003eM8\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMounting\u003c\/td\u003e\n\n\u003ctd\u003e10Nm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDC connector battery minus\u003c\/td\u003e\n\n\u003ctd\u003eFaston female, 6.3 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWeight\u003c\/td\u003e\n\n\u003ctd\u003e1.6 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\n\u003ctd\u003e65 × 120 × 224 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eEmission\u003c\/td\u003e\n\n\u003ctd\u003eEN 61000-6-3, EN 55014-1\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eImmunity\u003c\/td\u003e\n\n\u003ctd\u003eEN 61000-6-2, EN 61000-6-1, EN 55014-2\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAutomotive directive\u003c\/td\u003e\n\n\u003ctd\u003eECE R10-5\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAlternator port - max. charge current\u003c\/td\u003e\n\n\u003ctd\u003e100 A (with a 125 A fuse)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\n\u003ctd\u003eLITHIUM\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eItem number\u003c\/td\u003e\n\n\u003ctd\u003eBMS110022000\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-BMS-overview-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDownload datasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":65807367045469,"sku":"BMS110022000","price":1019.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/7649\/7757\/files\/2Ferp_2F56874450409703495231.jpg?v=1788478729"},{"product_id":"victron-ve-bus-bms-v2","title":"Victron VE.Bus BMS V2","description":"\u003ch2\u003eVictron VE.Bus BMS V2 – battery management system for lithium batteries\u003c\/h2\u003e\u003cp\u003eThe Victron VE.Bus BMS V2 is a battery management system (BMS) from Victron Energy for LiFePO4 batteries. It monitors the cells and intervenes with the charger, inverter, and MPPT before the battery can be damaged.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eProtects the cells:\u003c\/strong\u003e Disconnects charging and loads in case of excessively high or low cell voltage.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eControls the entire system:\u003c\/strong\u003e Sends a signal to the inverter, charger, and MPPT so they react before the battery is damaged.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFor Victron LiFePO4:\u003c\/strong\u003e Designed for Victron Smart Lithium batteries and their cell balancing.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eProtection of Victron LiFePO4 batteries against over- and undervoltage.\u003c\/li\u003e\n\n\u003cli\u003eLithium systems with inverter, charger, and MPPT from Victron.\u003c\/li\u003e\n\n\u003cli\u003eSafe operation of lithium banks in boats and campers.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eSpecification\u003c\/th\u003e\n\n\u003cth\u003eDetails\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCurrent draw - regular operation\u003c\/td\u003e\n\n\u003ctd\u003e10 mA (excluding load disconnect current)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCurrent draw - low cell voltage\u003c\/td\u003e\n\n\u003ctd\u003e2 mA\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCurrent draw - switched off via remote on\/off terminal\u003c\/td\u003e\n\n\u003ctd\u003e1.50 mA\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eGX-power output\u003c\/td\u003e\n\n\u003ctd\u003e1 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAux-in input\u003c\/td\u003e\n\n\u003ctd\u003e1 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePre-alarm output current rating\u003c\/td\u003e\n\n\u003ctd\u003e1 A, not short-circuit protected\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoad disconnect output\u003c\/td\u003e\n\n\u003ctd\u003eNormally high (output voltage ≈ supply voltage – 1 V) \/ Floating when load needs to be disconnected \/ Source current limit: 1 A \/ Sink current: 0 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCharge disconnect output\u003c\/td\u003e\n\n\u003ctd\u003eNormally high, (output voltage ≈ supply voltage – 1 V) \/ Floating when charger should be disconnected \/ Source current limit: 10 mA \/ Sink current: 0 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eRemote on\/off\u003c\/td\u003e\n\n\u003ctd\u003eUsage modes to turn system on or off: \/ ON when L and H terminals are interconnected (switch or relay contact) \/ ON when L terminal is pulled to battery minus (V\u0026lt;3.5 V) \/ ON when H terminal is high (2.9 V \u0026lt; VH \u0026lt; Vbat) \/ OFF in all other conditions\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eVE.Bus communications ports\u003c\/td\u003e\n\n\u003ctd\u003e2 x RJ45 sockets to connect to all VE.Bus products\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eInput voltage range\u003c\/td\u003e\n\n\u003ctd\u003e9 – 70Vdc\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\n\u003ctd\u003eABS\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eColor\u003c\/td\u003e\n\n\u003ctd\u003eMatte black with a blue sticker\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWeight\u003c\/td\u003e\n\n\u003ctd\u003e120g\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions (h × w × d)\u003c\/td\u003e\n\n\u003ctd\u003e23.8 mm × 94.5 mm × 105.5 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\n\u003ctd\u003eLITHIUM\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eItem number\u003c\/td\u003e\n\n\u003ctd\u003eBMS300200200\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/Datasheet-BMS-overview-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDownload datasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":65807367078237,"sku":"BMS300200200","price":1129.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/7649\/7757\/files\/2Ferp_2F68702099813368335901.jpg?v=1788478733"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/7649\/7757\/collections\/2Ferp_2F68702099813368335901.jpg?v=1790086877","url":"https:\/\/lithiumpro.dk\/en\/collections\/victron-bms.oembed","provider":"LithiumPro","version":"1.0","type":"link"}